mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-23 18:07:03 +00:00
42e3121d90
AudioQuest DragonFly DAC reports a volume control range of 0..50
(0x0000..0x0032) which in USB Audio means a range of 0 .. 0.2dB, which
is obviously incorrect and would cause software using the dB information
in e.g. volume sliders to have a massive volume difference in 100..102%
range.
Commit 2d1cb7f658
("ALSA: usb-audio: add dB range mapping for some
devices") added a dB range mapping for it with range 0..50 dB.
However, the actual volume mapping seems to be neither linear volume nor
linear dB scale, but instead quite close to the cubic mapping e.g.
alsamixer uses, with a range of approx. -53...0 dB.
Replace the previous quirk with a custom dB mapping based on some basic
output measurements, using a 10-item range TLV (which will still fit in
alsa-lib MAX_TLV_RANGE_SIZE).
Tested on AudioQuest DragonFly HW v1.2. The quirk is only applied if the
range is 0..50, so if this gets fixed/changed in later HW revisions it
will no longer be applied.
v2: incorporated Takashi Iwai's suggestion for the quirk application
method
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2599 lines
68 KiB
C
2599 lines
68 KiB
C
/*
|
|
* (Tentative) USB Audio Driver for ALSA
|
|
*
|
|
* Mixer control part
|
|
*
|
|
* Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
|
|
*
|
|
* Many codes borrowed from audio.c by
|
|
* Alan Cox (alan@lxorguk.ukuu.org.uk)
|
|
* Thomas Sailer (sailer@ife.ee.ethz.ch)
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* TODOs, for both the mixer and the streaming interfaces:
|
|
*
|
|
* - support for UAC2 effect units
|
|
* - support for graphical equalizers
|
|
* - RANGE and MEM set commands (UAC2)
|
|
* - RANGE and MEM interrupt dispatchers (UAC2)
|
|
* - audio channel clustering (UAC2)
|
|
* - audio sample rate converter units (UAC2)
|
|
* - proper handling of clock multipliers (UAC2)
|
|
* - dispatch clock change notifications (UAC2)
|
|
* - stop PCM streams which use a clock that became invalid
|
|
* - stop PCM streams which use a clock selector that has changed
|
|
* - parse available sample rates again when clock sources changed
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/audio.h>
|
|
#include <linux/usb/audio-v2.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/control.h>
|
|
#include <sound/hwdep.h>
|
|
#include <sound/info.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include "usbaudio.h"
|
|
#include "mixer.h"
|
|
#include "helper.h"
|
|
#include "mixer_quirks.h"
|
|
#include "power.h"
|
|
|
|
#define MAX_ID_ELEMS 256
|
|
|
|
struct usb_audio_term {
|
|
int id;
|
|
int type;
|
|
int channels;
|
|
unsigned int chconfig;
|
|
int name;
|
|
};
|
|
|
|
struct usbmix_name_map;
|
|
|
|
struct mixer_build {
|
|
struct snd_usb_audio *chip;
|
|
struct usb_mixer_interface *mixer;
|
|
unsigned char *buffer;
|
|
unsigned int buflen;
|
|
DECLARE_BITMAP(unitbitmap, MAX_ID_ELEMS);
|
|
struct usb_audio_term oterm;
|
|
const struct usbmix_name_map *map;
|
|
const struct usbmix_selector_map *selector_map;
|
|
};
|
|
|
|
/*E-mu 0202/0404/0204 eXtension Unit(XU) control*/
|
|
enum {
|
|
USB_XU_CLOCK_RATE = 0xe301,
|
|
USB_XU_CLOCK_SOURCE = 0xe302,
|
|
USB_XU_DIGITAL_IO_STATUS = 0xe303,
|
|
USB_XU_DEVICE_OPTIONS = 0xe304,
|
|
USB_XU_DIRECT_MONITORING = 0xe305,
|
|
USB_XU_METERING = 0xe306
|
|
};
|
|
enum {
|
|
USB_XU_CLOCK_SOURCE_SELECTOR = 0x02, /* clock source*/
|
|
USB_XU_CLOCK_RATE_SELECTOR = 0x03, /* clock rate */
|
|
USB_XU_DIGITAL_FORMAT_SELECTOR = 0x01, /* the spdif format */
|
|
USB_XU_SOFT_LIMIT_SELECTOR = 0x03 /* soft limiter */
|
|
};
|
|
|
|
/*
|
|
* manual mapping of mixer names
|
|
* if the mixer topology is too complicated and the parsed names are
|
|
* ambiguous, add the entries in usbmixer_maps.c.
|
|
*/
|
|
#include "mixer_maps.c"
|
|
|
|
static const struct usbmix_name_map *
|
|
find_map(struct mixer_build *state, int unitid, int control)
|
|
{
|
|
const struct usbmix_name_map *p = state->map;
|
|
|
|
if (!p)
|
|
return NULL;
|
|
|
|
for (p = state->map; p->id; p++) {
|
|
if (p->id == unitid &&
|
|
(!control || !p->control || control == p->control))
|
|
return p;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/* get the mapped name if the unit matches */
|
|
static int
|
|
check_mapped_name(const struct usbmix_name_map *p, char *buf, int buflen)
|
|
{
|
|
if (!p || !p->name)
|
|
return 0;
|
|
|
|
buflen--;
|
|
return strlcpy(buf, p->name, buflen);
|
|
}
|
|
|
|
/* ignore the error value if ignore_ctl_error flag is set */
|
|
#define filter_error(cval, err) \
|
|
((cval)->head.mixer->ignore_ctl_error ? 0 : (err))
|
|
|
|
/* check whether the control should be ignored */
|
|
static inline int
|
|
check_ignored_ctl(const struct usbmix_name_map *p)
|
|
{
|
|
if (!p || p->name || p->dB)
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
/* dB mapping */
|
|
static inline void check_mapped_dB(const struct usbmix_name_map *p,
|
|
struct usb_mixer_elem_info *cval)
|
|
{
|
|
if (p && p->dB) {
|
|
cval->dBmin = p->dB->min;
|
|
cval->dBmax = p->dB->max;
|
|
cval->initialized = 1;
|
|
}
|
|
}
|
|
|
|
/* get the mapped selector source name */
|
|
static int check_mapped_selector_name(struct mixer_build *state, int unitid,
|
|
int index, char *buf, int buflen)
|
|
{
|
|
const struct usbmix_selector_map *p;
|
|
|
|
if (!state->selector_map)
|
|
return 0;
|
|
for (p = state->selector_map; p->id; p++) {
|
|
if (p->id == unitid && index < p->count)
|
|
return strlcpy(buf, p->names[index], buflen);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* find an audio control unit with the given unit id
|
|
*/
|
|
static void *find_audio_control_unit(struct mixer_build *state,
|
|
unsigned char unit)
|
|
{
|
|
/* we just parse the header */
|
|
struct uac_feature_unit_descriptor *hdr = NULL;
|
|
|
|
while ((hdr = snd_usb_find_desc(state->buffer, state->buflen, hdr,
|
|
USB_DT_CS_INTERFACE)) != NULL) {
|
|
if (hdr->bLength >= 4 &&
|
|
hdr->bDescriptorSubtype >= UAC_INPUT_TERMINAL &&
|
|
hdr->bDescriptorSubtype <= UAC2_SAMPLE_RATE_CONVERTER &&
|
|
hdr->bUnitID == unit)
|
|
return hdr;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* copy a string with the given id
|
|
*/
|
|
static int snd_usb_copy_string_desc(struct mixer_build *state,
|
|
int index, char *buf, int maxlen)
|
|
{
|
|
int len = usb_string(state->chip->dev, index, buf, maxlen - 1);
|
|
buf[len] = 0;
|
|
return len;
|
|
}
|
|
|
|
/*
|
|
* convert from the byte/word on usb descriptor to the zero-based integer
|
|
*/
|
|
static int convert_signed_value(struct usb_mixer_elem_info *cval, int val)
|
|
{
|
|
switch (cval->val_type) {
|
|
case USB_MIXER_BOOLEAN:
|
|
return !!val;
|
|
case USB_MIXER_INV_BOOLEAN:
|
|
return !val;
|
|
case USB_MIXER_U8:
|
|
val &= 0xff;
|
|
break;
|
|
case USB_MIXER_S8:
|
|
val &= 0xff;
|
|
if (val >= 0x80)
|
|
val -= 0x100;
|
|
break;
|
|
case USB_MIXER_U16:
|
|
val &= 0xffff;
|
|
break;
|
|
case USB_MIXER_S16:
|
|
val &= 0xffff;
|
|
if (val >= 0x8000)
|
|
val -= 0x10000;
|
|
break;
|
|
}
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
* convert from the zero-based int to the byte/word for usb descriptor
|
|
*/
|
|
static int convert_bytes_value(struct usb_mixer_elem_info *cval, int val)
|
|
{
|
|
switch (cval->val_type) {
|
|
case USB_MIXER_BOOLEAN:
|
|
return !!val;
|
|
case USB_MIXER_INV_BOOLEAN:
|
|
return !val;
|
|
case USB_MIXER_S8:
|
|
case USB_MIXER_U8:
|
|
return val & 0xff;
|
|
case USB_MIXER_S16:
|
|
case USB_MIXER_U16:
|
|
return val & 0xffff;
|
|
}
|
|
return 0; /* not reached */
|
|
}
|
|
|
|
static int get_relative_value(struct usb_mixer_elem_info *cval, int val)
|
|
{
|
|
if (!cval->res)
|
|
cval->res = 1;
|
|
if (val < cval->min)
|
|
return 0;
|
|
else if (val >= cval->max)
|
|
return (cval->max - cval->min + cval->res - 1) / cval->res;
|
|
else
|
|
return (val - cval->min) / cval->res;
|
|
}
|
|
|
|
static int get_abs_value(struct usb_mixer_elem_info *cval, int val)
|
|
{
|
|
if (val < 0)
|
|
return cval->min;
|
|
if (!cval->res)
|
|
cval->res = 1;
|
|
val *= cval->res;
|
|
val += cval->min;
|
|
if (val > cval->max)
|
|
return cval->max;
|
|
return val;
|
|
}
|
|
|
|
static int uac2_ctl_value_size(int val_type)
|
|
{
|
|
switch (val_type) {
|
|
case USB_MIXER_S32:
|
|
case USB_MIXER_U32:
|
|
return 4;
|
|
case USB_MIXER_S16:
|
|
case USB_MIXER_U16:
|
|
return 2;
|
|
default:
|
|
return 1;
|
|
}
|
|
return 0; /* unreachable */
|
|
}
|
|
|
|
|
|
/*
|
|
* retrieve a mixer value
|
|
*/
|
|
|
|
static int get_ctl_value_v1(struct usb_mixer_elem_info *cval, int request,
|
|
int validx, int *value_ret)
|
|
{
|
|
struct snd_usb_audio *chip = cval->head.mixer->chip;
|
|
unsigned char buf[2];
|
|
int val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1;
|
|
int timeout = 10;
|
|
int idx = 0, err;
|
|
|
|
err = snd_usb_lock_shutdown(chip);
|
|
if (err < 0)
|
|
return -EIO;
|
|
|
|
while (timeout-- > 0) {
|
|
idx = snd_usb_ctrl_intf(chip) | (cval->head.id << 8);
|
|
if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request,
|
|
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
|
|
validx, idx, buf, val_len) >= val_len) {
|
|
*value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len));
|
|
err = 0;
|
|
goto out;
|
|
}
|
|
}
|
|
usb_audio_dbg(chip,
|
|
"cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
|
|
request, validx, idx, cval->val_type);
|
|
err = -EINVAL;
|
|
|
|
out:
|
|
snd_usb_unlock_shutdown(chip);
|
|
return err;
|
|
}
|
|
|
|
static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request,
|
|
int validx, int *value_ret)
|
|
{
|
|
struct snd_usb_audio *chip = cval->head.mixer->chip;
|
|
unsigned char buf[4 + 3 * sizeof(__u32)]; /* enough space for one range */
|
|
unsigned char *val;
|
|
int idx = 0, ret, size;
|
|
__u8 bRequest;
|
|
|
|
if (request == UAC_GET_CUR) {
|
|
bRequest = UAC2_CS_CUR;
|
|
size = uac2_ctl_value_size(cval->val_type);
|
|
} else {
|
|
bRequest = UAC2_CS_RANGE;
|
|
size = sizeof(buf);
|
|
}
|
|
|
|
memset(buf, 0, sizeof(buf));
|
|
|
|
ret = snd_usb_lock_shutdown(chip) ? -EIO : 0;
|
|
if (ret)
|
|
goto error;
|
|
|
|
idx = snd_usb_ctrl_intf(chip) | (cval->head.id << 8);
|
|
ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
|
|
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
|
|
validx, idx, buf, size);
|
|
snd_usb_unlock_shutdown(chip);
|
|
|
|
if (ret < 0) {
|
|
error:
|
|
usb_audio_err(chip,
|
|
"cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
|
|
request, validx, idx, cval->val_type);
|
|
return ret;
|
|
}
|
|
|
|
/* FIXME: how should we handle multiple triplets here? */
|
|
|
|
switch (request) {
|
|
case UAC_GET_CUR:
|
|
val = buf;
|
|
break;
|
|
case UAC_GET_MIN:
|
|
val = buf + sizeof(__u16);
|
|
break;
|
|
case UAC_GET_MAX:
|
|
val = buf + sizeof(__u16) * 2;
|
|
break;
|
|
case UAC_GET_RES:
|
|
val = buf + sizeof(__u16) * 3;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
*value_ret = convert_signed_value(cval, snd_usb_combine_bytes(val, sizeof(__u16)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int get_ctl_value(struct usb_mixer_elem_info *cval, int request,
|
|
int validx, int *value_ret)
|
|
{
|
|
validx += cval->idx_off;
|
|
|
|
return (cval->head.mixer->protocol == UAC_VERSION_1) ?
|
|
get_ctl_value_v1(cval, request, validx, value_ret) :
|
|
get_ctl_value_v2(cval, request, validx, value_ret);
|
|
}
|
|
|
|
static int get_cur_ctl_value(struct usb_mixer_elem_info *cval,
|
|
int validx, int *value)
|
|
{
|
|
return get_ctl_value(cval, UAC_GET_CUR, validx, value);
|
|
}
|
|
|
|
/* channel = 0: master, 1 = first channel */
|
|
static inline int get_cur_mix_raw(struct usb_mixer_elem_info *cval,
|
|
int channel, int *value)
|
|
{
|
|
return get_ctl_value(cval, UAC_GET_CUR,
|
|
(cval->control << 8) | channel,
|
|
value);
|
|
}
|
|
|
|
int snd_usb_get_cur_mix_value(struct usb_mixer_elem_info *cval,
|
|
int channel, int index, int *value)
|
|
{
|
|
int err;
|
|
|
|
if (cval->cached & (1 << channel)) {
|
|
*value = cval->cache_val[index];
|
|
return 0;
|
|
}
|
|
err = get_cur_mix_raw(cval, channel, value);
|
|
if (err < 0) {
|
|
if (!cval->head.mixer->ignore_ctl_error)
|
|
usb_audio_dbg(cval->head.mixer->chip,
|
|
"cannot get current value for control %d ch %d: err = %d\n",
|
|
cval->control, channel, err);
|
|
return err;
|
|
}
|
|
cval->cached |= 1 << channel;
|
|
cval->cache_val[index] = *value;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* set a mixer value
|
|
*/
|
|
|
|
int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval,
|
|
int request, int validx, int value_set)
|
|
{
|
|
struct snd_usb_audio *chip = cval->head.mixer->chip;
|
|
unsigned char buf[4];
|
|
int idx = 0, val_len, err, timeout = 10;
|
|
|
|
validx += cval->idx_off;
|
|
|
|
if (cval->head.mixer->protocol == UAC_VERSION_1) {
|
|
val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1;
|
|
} else { /* UAC_VERSION_2 */
|
|
val_len = uac2_ctl_value_size(cval->val_type);
|
|
|
|
/* FIXME */
|
|
if (request != UAC_SET_CUR) {
|
|
usb_audio_dbg(chip, "RANGE setting not yet supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
request = UAC2_CS_CUR;
|
|
}
|
|
|
|
value_set = convert_bytes_value(cval, value_set);
|
|
buf[0] = value_set & 0xff;
|
|
buf[1] = (value_set >> 8) & 0xff;
|
|
buf[2] = (value_set >> 16) & 0xff;
|
|
buf[3] = (value_set >> 24) & 0xff;
|
|
|
|
err = snd_usb_lock_shutdown(chip);
|
|
if (err < 0)
|
|
return -EIO;
|
|
|
|
while (timeout-- > 0) {
|
|
idx = snd_usb_ctrl_intf(chip) | (cval->head.id << 8);
|
|
if (snd_usb_ctl_msg(chip->dev,
|
|
usb_sndctrlpipe(chip->dev, 0), request,
|
|
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
|
|
validx, idx, buf, val_len) >= 0) {
|
|
err = 0;
|
|
goto out;
|
|
}
|
|
}
|
|
usb_audio_dbg(chip, "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n",
|
|
request, validx, idx, cval->val_type, buf[0], buf[1]);
|
|
err = -EINVAL;
|
|
|
|
out:
|
|
snd_usb_unlock_shutdown(chip);
|
|
return err;
|
|
}
|
|
|
|
static int set_cur_ctl_value(struct usb_mixer_elem_info *cval,
|
|
int validx, int value)
|
|
{
|
|
return snd_usb_mixer_set_ctl_value(cval, UAC_SET_CUR, validx, value);
|
|
}
|
|
|
|
int snd_usb_set_cur_mix_value(struct usb_mixer_elem_info *cval, int channel,
|
|
int index, int value)
|
|
{
|
|
int err;
|
|
unsigned int read_only = (channel == 0) ?
|
|
cval->master_readonly :
|
|
cval->ch_readonly & (1 << (channel - 1));
|
|
|
|
if (read_only) {
|
|
usb_audio_dbg(cval->head.mixer->chip,
|
|
"%s(): channel %d of control %d is read_only\n",
|
|
__func__, channel, cval->control);
|
|
return 0;
|
|
}
|
|
|
|
err = snd_usb_mixer_set_ctl_value(cval,
|
|
UAC_SET_CUR, (cval->control << 8) | channel,
|
|
value);
|
|
if (err < 0)
|
|
return err;
|
|
cval->cached |= 1 << channel;
|
|
cval->cache_val[index] = value;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* TLV callback for mixer volume controls
|
|
*/
|
|
int snd_usb_mixer_vol_tlv(struct snd_kcontrol *kcontrol, int op_flag,
|
|
unsigned int size, unsigned int __user *_tlv)
|
|
{
|
|
struct usb_mixer_elem_info *cval = kcontrol->private_data;
|
|
DECLARE_TLV_DB_MINMAX(scale, 0, 0);
|
|
|
|
if (size < sizeof(scale))
|
|
return -ENOMEM;
|
|
scale[2] = cval->dBmin;
|
|
scale[3] = cval->dBmax;
|
|
if (copy_to_user(_tlv, scale, sizeof(scale)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* parser routines begin here...
|
|
*/
|
|
|
|
static int parse_audio_unit(struct mixer_build *state, int unitid);
|
|
|
|
|
|
/*
|
|
* check if the input/output channel routing is enabled on the given bitmap.
|
|
* used for mixer unit parser
|
|
*/
|
|
static int check_matrix_bitmap(unsigned char *bmap,
|
|
int ich, int och, int num_outs)
|
|
{
|
|
int idx = ich * num_outs + och;
|
|
return bmap[idx >> 3] & (0x80 >> (idx & 7));
|
|
}
|
|
|
|
/*
|
|
* add an alsa control element
|
|
* search and increment the index until an empty slot is found.
|
|
*
|
|
* if failed, give up and free the control instance.
|
|
*/
|
|
|
|
int snd_usb_mixer_add_control(struct usb_mixer_elem_list *list,
|
|
struct snd_kcontrol *kctl)
|
|
{
|
|
struct usb_mixer_interface *mixer = list->mixer;
|
|
int err;
|
|
|
|
while (snd_ctl_find_id(mixer->chip->card, &kctl->id))
|
|
kctl->id.index++;
|
|
if ((err = snd_ctl_add(mixer->chip->card, kctl)) < 0) {
|
|
usb_audio_dbg(mixer->chip, "cannot add control (err = %d)\n",
|
|
err);
|
|
return err;
|
|
}
|
|
list->kctl = kctl;
|
|
list->next_id_elem = mixer->id_elems[list->id];
|
|
mixer->id_elems[list->id] = list;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* get a terminal name string
|
|
*/
|
|
|
|
static struct iterm_name_combo {
|
|
int type;
|
|
char *name;
|
|
} iterm_names[] = {
|
|
{ 0x0300, "Output" },
|
|
{ 0x0301, "Speaker" },
|
|
{ 0x0302, "Headphone" },
|
|
{ 0x0303, "HMD Audio" },
|
|
{ 0x0304, "Desktop Speaker" },
|
|
{ 0x0305, "Room Speaker" },
|
|
{ 0x0306, "Com Speaker" },
|
|
{ 0x0307, "LFE" },
|
|
{ 0x0600, "External In" },
|
|
{ 0x0601, "Analog In" },
|
|
{ 0x0602, "Digital In" },
|
|
{ 0x0603, "Line" },
|
|
{ 0x0604, "Legacy In" },
|
|
{ 0x0605, "IEC958 In" },
|
|
{ 0x0606, "1394 DA Stream" },
|
|
{ 0x0607, "1394 DV Stream" },
|
|
{ 0x0700, "Embedded" },
|
|
{ 0x0701, "Noise Source" },
|
|
{ 0x0702, "Equalization Noise" },
|
|
{ 0x0703, "CD" },
|
|
{ 0x0704, "DAT" },
|
|
{ 0x0705, "DCC" },
|
|
{ 0x0706, "MiniDisk" },
|
|
{ 0x0707, "Analog Tape" },
|
|
{ 0x0708, "Phonograph" },
|
|
{ 0x0709, "VCR Audio" },
|
|
{ 0x070a, "Video Disk Audio" },
|
|
{ 0x070b, "DVD Audio" },
|
|
{ 0x070c, "TV Tuner Audio" },
|
|
{ 0x070d, "Satellite Rec Audio" },
|
|
{ 0x070e, "Cable Tuner Audio" },
|
|
{ 0x070f, "DSS Audio" },
|
|
{ 0x0710, "Radio Receiver" },
|
|
{ 0x0711, "Radio Transmitter" },
|
|
{ 0x0712, "Multi-Track Recorder" },
|
|
{ 0x0713, "Synthesizer" },
|
|
{ 0 },
|
|
};
|
|
|
|
static int get_term_name(struct mixer_build *state, struct usb_audio_term *iterm,
|
|
unsigned char *name, int maxlen, int term_only)
|
|
{
|
|
struct iterm_name_combo *names;
|
|
|
|
if (iterm->name)
|
|
return snd_usb_copy_string_desc(state, iterm->name,
|
|
name, maxlen);
|
|
|
|
/* virtual type - not a real terminal */
|
|
if (iterm->type >> 16) {
|
|
if (term_only)
|
|
return 0;
|
|
switch (iterm->type >> 16) {
|
|
case UAC_SELECTOR_UNIT:
|
|
strcpy(name, "Selector");
|
|
return 8;
|
|
case UAC1_PROCESSING_UNIT:
|
|
strcpy(name, "Process Unit");
|
|
return 12;
|
|
case UAC1_EXTENSION_UNIT:
|
|
strcpy(name, "Ext Unit");
|
|
return 8;
|
|
case UAC_MIXER_UNIT:
|
|
strcpy(name, "Mixer");
|
|
return 5;
|
|
default:
|
|
return sprintf(name, "Unit %d", iterm->id);
|
|
}
|
|
}
|
|
|
|
switch (iterm->type & 0xff00) {
|
|
case 0x0100:
|
|
strcpy(name, "PCM");
|
|
return 3;
|
|
case 0x0200:
|
|
strcpy(name, "Mic");
|
|
return 3;
|
|
case 0x0400:
|
|
strcpy(name, "Headset");
|
|
return 7;
|
|
case 0x0500:
|
|
strcpy(name, "Phone");
|
|
return 5;
|
|
}
|
|
|
|
for (names = iterm_names; names->type; names++) {
|
|
if (names->type == iterm->type) {
|
|
strcpy(name, names->name);
|
|
return strlen(names->name);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* parse the source unit recursively until it reaches to a terminal
|
|
* or a branched unit.
|
|
*/
|
|
static int check_input_term(struct mixer_build *state, int id,
|
|
struct usb_audio_term *term)
|
|
{
|
|
int err;
|
|
void *p1;
|
|
|
|
memset(term, 0, sizeof(*term));
|
|
while ((p1 = find_audio_control_unit(state, id)) != NULL) {
|
|
unsigned char *hdr = p1;
|
|
term->id = id;
|
|
switch (hdr[2]) {
|
|
case UAC_INPUT_TERMINAL:
|
|
if (state->mixer->protocol == UAC_VERSION_1) {
|
|
struct uac_input_terminal_descriptor *d = p1;
|
|
term->type = le16_to_cpu(d->wTerminalType);
|
|
term->channels = d->bNrChannels;
|
|
term->chconfig = le16_to_cpu(d->wChannelConfig);
|
|
term->name = d->iTerminal;
|
|
} else { /* UAC_VERSION_2 */
|
|
struct uac2_input_terminal_descriptor *d = p1;
|
|
|
|
/* call recursively to verify that the
|
|
* referenced clock entity is valid */
|
|
err = check_input_term(state, d->bCSourceID, term);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* save input term properties after recursion,
|
|
* to ensure they are not overriden by the
|
|
* recursion calls */
|
|
term->id = id;
|
|
term->type = le16_to_cpu(d->wTerminalType);
|
|
term->channels = d->bNrChannels;
|
|
term->chconfig = le32_to_cpu(d->bmChannelConfig);
|
|
term->name = d->iTerminal;
|
|
}
|
|
return 0;
|
|
case UAC_FEATURE_UNIT: {
|
|
/* the header is the same for v1 and v2 */
|
|
struct uac_feature_unit_descriptor *d = p1;
|
|
id = d->bSourceID;
|
|
break; /* continue to parse */
|
|
}
|
|
case UAC_MIXER_UNIT: {
|
|
struct uac_mixer_unit_descriptor *d = p1;
|
|
term->type = d->bDescriptorSubtype << 16; /* virtual type */
|
|
term->channels = uac_mixer_unit_bNrChannels(d);
|
|
term->chconfig = uac_mixer_unit_wChannelConfig(d, state->mixer->protocol);
|
|
term->name = uac_mixer_unit_iMixer(d);
|
|
return 0;
|
|
}
|
|
case UAC_SELECTOR_UNIT:
|
|
case UAC2_CLOCK_SELECTOR: {
|
|
struct uac_selector_unit_descriptor *d = p1;
|
|
/* call recursively to retrieve the channel info */
|
|
err = check_input_term(state, d->baSourceID[0], term);
|
|
if (err < 0)
|
|
return err;
|
|
term->type = d->bDescriptorSubtype << 16; /* virtual type */
|
|
term->id = id;
|
|
term->name = uac_selector_unit_iSelector(d);
|
|
return 0;
|
|
}
|
|
case UAC1_PROCESSING_UNIT:
|
|
case UAC1_EXTENSION_UNIT:
|
|
/* UAC2_PROCESSING_UNIT_V2 */
|
|
/* UAC2_EFFECT_UNIT */
|
|
case UAC2_EXTENSION_UNIT_V2: {
|
|
struct uac_processing_unit_descriptor *d = p1;
|
|
|
|
if (state->mixer->protocol == UAC_VERSION_2 &&
|
|
hdr[2] == UAC2_EFFECT_UNIT) {
|
|
/* UAC2/UAC1 unit IDs overlap here in an
|
|
* uncompatible way. Ignore this unit for now.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
if (d->bNrInPins) {
|
|
id = d->baSourceID[0];
|
|
break; /* continue to parse */
|
|
}
|
|
term->type = d->bDescriptorSubtype << 16; /* virtual type */
|
|
term->channels = uac_processing_unit_bNrChannels(d);
|
|
term->chconfig = uac_processing_unit_wChannelConfig(d, state->mixer->protocol);
|
|
term->name = uac_processing_unit_iProcessing(d, state->mixer->protocol);
|
|
return 0;
|
|
}
|
|
case UAC2_CLOCK_SOURCE: {
|
|
struct uac_clock_source_descriptor *d = p1;
|
|
term->type = d->bDescriptorSubtype << 16; /* virtual type */
|
|
term->id = id;
|
|
term->name = d->iClockSource;
|
|
return 0;
|
|
}
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Feature Unit
|
|
*/
|
|
|
|
/* feature unit control information */
|
|
struct usb_feature_control_info {
|
|
const char *name;
|
|
int type; /* data type for uac1 */
|
|
int type_uac2; /* data type for uac2 if different from uac1, else -1 */
|
|
};
|
|
|
|
static struct usb_feature_control_info audio_feature_info[] = {
|
|
{ "Mute", USB_MIXER_INV_BOOLEAN, -1 },
|
|
{ "Volume", USB_MIXER_S16, -1 },
|
|
{ "Tone Control - Bass", USB_MIXER_S8, -1 },
|
|
{ "Tone Control - Mid", USB_MIXER_S8, -1 },
|
|
{ "Tone Control - Treble", USB_MIXER_S8, -1 },
|
|
{ "Graphic Equalizer", USB_MIXER_S8, -1 }, /* FIXME: not implemeted yet */
|
|
{ "Auto Gain Control", USB_MIXER_BOOLEAN, -1 },
|
|
{ "Delay Control", USB_MIXER_U16, USB_MIXER_U32 },
|
|
{ "Bass Boost", USB_MIXER_BOOLEAN, -1 },
|
|
{ "Loudness", USB_MIXER_BOOLEAN, -1 },
|
|
/* UAC2 specific */
|
|
{ "Input Gain Control", USB_MIXER_S16, -1 },
|
|
{ "Input Gain Pad Control", USB_MIXER_S16, -1 },
|
|
{ "Phase Inverter Control", USB_MIXER_BOOLEAN, -1 },
|
|
};
|
|
|
|
/* private_free callback */
|
|
void snd_usb_mixer_elem_free(struct snd_kcontrol *kctl)
|
|
{
|
|
kfree(kctl->private_data);
|
|
kctl->private_data = NULL;
|
|
}
|
|
|
|
/*
|
|
* interface to ALSA control for feature/mixer units
|
|
*/
|
|
|
|
/* volume control quirks */
|
|
static void volume_control_quirks(struct usb_mixer_elem_info *cval,
|
|
struct snd_kcontrol *kctl)
|
|
{
|
|
struct snd_usb_audio *chip = cval->head.mixer->chip;
|
|
switch (chip->usb_id) {
|
|
case USB_ID(0x0763, 0x2030): /* M-Audio Fast Track C400 */
|
|
case USB_ID(0x0763, 0x2031): /* M-Audio Fast Track C600 */
|
|
if (strcmp(kctl->id.name, "Effect Duration") == 0) {
|
|
cval->min = 0x0000;
|
|
cval->max = 0xffff;
|
|
cval->res = 0x00e6;
|
|
break;
|
|
}
|
|
if (strcmp(kctl->id.name, "Effect Volume") == 0 ||
|
|
strcmp(kctl->id.name, "Effect Feedback Volume") == 0) {
|
|
cval->min = 0x00;
|
|
cval->max = 0xff;
|
|
break;
|
|
}
|
|
if (strstr(kctl->id.name, "Effect Return") != NULL) {
|
|
cval->min = 0xb706;
|
|
cval->max = 0xff7b;
|
|
cval->res = 0x0073;
|
|
break;
|
|
}
|
|
if ((strstr(kctl->id.name, "Playback Volume") != NULL) ||
|
|
(strstr(kctl->id.name, "Effect Send") != NULL)) {
|
|
cval->min = 0xb5fb; /* -73 dB = 0xb6ff */
|
|
cval->max = 0xfcfe;
|
|
cval->res = 0x0073;
|
|
}
|
|
break;
|
|
|
|
case USB_ID(0x0763, 0x2081): /* M-Audio Fast Track Ultra 8R */
|
|
case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra */
|
|
if (strcmp(kctl->id.name, "Effect Duration") == 0) {
|
|
usb_audio_info(chip,
|
|
"set quirk for FTU Effect Duration\n");
|
|
cval->min = 0x0000;
|
|
cval->max = 0x7f00;
|
|
cval->res = 0x0100;
|
|
break;
|
|
}
|
|
if (strcmp(kctl->id.name, "Effect Volume") == 0 ||
|
|
strcmp(kctl->id.name, "Effect Feedback Volume") == 0) {
|
|
usb_audio_info(chip,
|
|
"set quirks for FTU Effect Feedback/Volume\n");
|
|
cval->min = 0x00;
|
|
cval->max = 0x7f;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case USB_ID(0x0471, 0x0101):
|
|
case USB_ID(0x0471, 0x0104):
|
|
case USB_ID(0x0471, 0x0105):
|
|
case USB_ID(0x0672, 0x1041):
|
|
/* quirk for UDA1321/N101.
|
|
* note that detection between firmware 2.1.1.7 (N101)
|
|
* and later 2.1.1.21 is not very clear from datasheets.
|
|
* I hope that the min value is -15360 for newer firmware --jk
|
|
*/
|
|
if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
|
|
cval->min == -15616) {
|
|
usb_audio_info(chip,
|
|
"set volume quirk for UDA1321/N101 chip\n");
|
|
cval->max = -256;
|
|
}
|
|
break;
|
|
|
|
case USB_ID(0x046d, 0x09a4):
|
|
if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
|
|
usb_audio_info(chip,
|
|
"set volume quirk for QuickCam E3500\n");
|
|
cval->min = 6080;
|
|
cval->max = 8768;
|
|
cval->res = 192;
|
|
}
|
|
break;
|
|
|
|
case USB_ID(0x046d, 0x0807): /* Logitech Webcam C500 */
|
|
case USB_ID(0x046d, 0x0808):
|
|
case USB_ID(0x046d, 0x0809):
|
|
case USB_ID(0x046d, 0x0819): /* Logitech Webcam C210 */
|
|
case USB_ID(0x046d, 0x081b): /* HD Webcam c310 */
|
|
case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
|
|
case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */
|
|
case USB_ID(0x046d, 0x0826): /* HD Webcam c525 */
|
|
case USB_ID(0x046d, 0x08ca): /* Logitech Quickcam Fusion */
|
|
case USB_ID(0x046d, 0x0991):
|
|
/* Most audio usb devices lie about volume resolution.
|
|
* Most Logitech webcams have res = 384.
|
|
* Proboly there is some logitech magic behind this number --fishor
|
|
*/
|
|
if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
|
|
usb_audio_info(chip,
|
|
"set resolution quirk: cval->res = 384\n");
|
|
cval->res = 384;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* retrieve the minimum and maximum values for the specified control
|
|
*/
|
|
static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
|
|
int default_min, struct snd_kcontrol *kctl)
|
|
{
|
|
/* for failsafe */
|
|
cval->min = default_min;
|
|
cval->max = cval->min + 1;
|
|
cval->res = 1;
|
|
cval->dBmin = cval->dBmax = 0;
|
|
|
|
if (cval->val_type == USB_MIXER_BOOLEAN ||
|
|
cval->val_type == USB_MIXER_INV_BOOLEAN) {
|
|
cval->initialized = 1;
|
|
} else {
|
|
int minchn = 0;
|
|
if (cval->cmask) {
|
|
int i;
|
|
for (i = 0; i < MAX_CHANNELS; i++)
|
|
if (cval->cmask & (1 << i)) {
|
|
minchn = i + 1;
|
|
break;
|
|
}
|
|
}
|
|
if (get_ctl_value(cval, UAC_GET_MAX, (cval->control << 8) | minchn, &cval->max) < 0 ||
|
|
get_ctl_value(cval, UAC_GET_MIN, (cval->control << 8) | minchn, &cval->min) < 0) {
|
|
usb_audio_err(cval->head.mixer->chip,
|
|
"%d:%d: cannot get min/max values for control %d (id %d)\n",
|
|
cval->head.id, snd_usb_ctrl_intf(cval->head.mixer->chip),
|
|
cval->control, cval->head.id);
|
|
return -EINVAL;
|
|
}
|
|
if (get_ctl_value(cval, UAC_GET_RES,
|
|
(cval->control << 8) | minchn,
|
|
&cval->res) < 0) {
|
|
cval->res = 1;
|
|
} else {
|
|
int last_valid_res = cval->res;
|
|
|
|
while (cval->res > 1) {
|
|
if (snd_usb_mixer_set_ctl_value(cval, UAC_SET_RES,
|
|
(cval->control << 8) | minchn,
|
|
cval->res / 2) < 0)
|
|
break;
|
|
cval->res /= 2;
|
|
}
|
|
if (get_ctl_value(cval, UAC_GET_RES,
|
|
(cval->control << 8) | minchn, &cval->res) < 0)
|
|
cval->res = last_valid_res;
|
|
}
|
|
if (cval->res == 0)
|
|
cval->res = 1;
|
|
|
|
/* Additional checks for the proper resolution
|
|
*
|
|
* Some devices report smaller resolutions than actually
|
|
* reacting. They don't return errors but simply clip
|
|
* to the lower aligned value.
|
|
*/
|
|
if (cval->min + cval->res < cval->max) {
|
|
int last_valid_res = cval->res;
|
|
int saved, test, check;
|
|
get_cur_mix_raw(cval, minchn, &saved);
|
|
for (;;) {
|
|
test = saved;
|
|
if (test < cval->max)
|
|
test += cval->res;
|
|
else
|
|
test -= cval->res;
|
|
if (test < cval->min || test > cval->max ||
|
|
snd_usb_set_cur_mix_value(cval, minchn, 0, test) ||
|
|
get_cur_mix_raw(cval, minchn, &check)) {
|
|
cval->res = last_valid_res;
|
|
break;
|
|
}
|
|
if (test == check)
|
|
break;
|
|
cval->res *= 2;
|
|
}
|
|
snd_usb_set_cur_mix_value(cval, minchn, 0, saved);
|
|
}
|
|
|
|
cval->initialized = 1;
|
|
}
|
|
|
|
if (kctl)
|
|
volume_control_quirks(cval, kctl);
|
|
|
|
/* USB descriptions contain the dB scale in 1/256 dB unit
|
|
* while ALSA TLV contains in 1/100 dB unit
|
|
*/
|
|
cval->dBmin = (convert_signed_value(cval, cval->min) * 100) / 256;
|
|
cval->dBmax = (convert_signed_value(cval, cval->max) * 100) / 256;
|
|
if (cval->dBmin > cval->dBmax) {
|
|
/* something is wrong; assume it's either from/to 0dB */
|
|
if (cval->dBmin < 0)
|
|
cval->dBmax = 0;
|
|
else if (cval->dBmin > 0)
|
|
cval->dBmin = 0;
|
|
if (cval->dBmin > cval->dBmax) {
|
|
/* totally crap, return an error */
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define get_min_max(cval, def) get_min_max_with_quirks(cval, def, NULL)
|
|
|
|
/* get a feature/mixer unit info */
|
|
static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
struct usb_mixer_elem_info *cval = kcontrol->private_data;
|
|
|
|
if (cval->val_type == USB_MIXER_BOOLEAN ||
|
|
cval->val_type == USB_MIXER_INV_BOOLEAN)
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
|
|
else
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = cval->channels;
|
|
if (cval->val_type == USB_MIXER_BOOLEAN ||
|
|
cval->val_type == USB_MIXER_INV_BOOLEAN) {
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 1;
|
|
} else {
|
|
if (!cval->initialized) {
|
|
get_min_max_with_quirks(cval, 0, kcontrol);
|
|
if (cval->initialized && cval->dBmin >= cval->dBmax) {
|
|
kcontrol->vd[0].access &=
|
|
~(SNDRV_CTL_ELEM_ACCESS_TLV_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK);
|
|
snd_ctl_notify(cval->head.mixer->chip->card,
|
|
SNDRV_CTL_EVENT_MASK_INFO,
|
|
&kcontrol->id);
|
|
}
|
|
}
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max =
|
|
(cval->max - cval->min + cval->res - 1) / cval->res;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* get the current value from feature/mixer unit */
|
|
static int mixer_ctl_feature_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct usb_mixer_elem_info *cval = kcontrol->private_data;
|
|
int c, cnt, val, err;
|
|
|
|
ucontrol->value.integer.value[0] = cval->min;
|
|
if (cval->cmask) {
|
|
cnt = 0;
|
|
for (c = 0; c < MAX_CHANNELS; c++) {
|
|
if (!(cval->cmask & (1 << c)))
|
|
continue;
|
|
err = snd_usb_get_cur_mix_value(cval, c + 1, cnt, &val);
|
|
if (err < 0)
|
|
return filter_error(cval, err);
|
|
val = get_relative_value(cval, val);
|
|
ucontrol->value.integer.value[cnt] = val;
|
|
cnt++;
|
|
}
|
|
return 0;
|
|
} else {
|
|
/* master channel */
|
|
err = snd_usb_get_cur_mix_value(cval, 0, 0, &val);
|
|
if (err < 0)
|
|
return filter_error(cval, err);
|
|
val = get_relative_value(cval, val);
|
|
ucontrol->value.integer.value[0] = val;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* put the current value to feature/mixer unit */
|
|
static int mixer_ctl_feature_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct usb_mixer_elem_info *cval = kcontrol->private_data;
|
|
int c, cnt, val, oval, err;
|
|
int changed = 0;
|
|
|
|
if (cval->cmask) {
|
|
cnt = 0;
|
|
for (c = 0; c < MAX_CHANNELS; c++) {
|
|
if (!(cval->cmask & (1 << c)))
|
|
continue;
|
|
err = snd_usb_get_cur_mix_value(cval, c + 1, cnt, &oval);
|
|
if (err < 0)
|
|
return filter_error(cval, err);
|
|
val = ucontrol->value.integer.value[cnt];
|
|
val = get_abs_value(cval, val);
|
|
if (oval != val) {
|
|
snd_usb_set_cur_mix_value(cval, c + 1, cnt, val);
|
|
changed = 1;
|
|
}
|
|
cnt++;
|
|
}
|
|
} else {
|
|
/* master channel */
|
|
err = snd_usb_get_cur_mix_value(cval, 0, 0, &oval);
|
|
if (err < 0)
|
|
return filter_error(cval, err);
|
|
val = ucontrol->value.integer.value[0];
|
|
val = get_abs_value(cval, val);
|
|
if (val != oval) {
|
|
snd_usb_set_cur_mix_value(cval, 0, 0, val);
|
|
changed = 1;
|
|
}
|
|
}
|
|
return changed;
|
|
}
|
|
|
|
static struct snd_kcontrol_new usb_feature_unit_ctl = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "", /* will be filled later manually */
|
|
.info = mixer_ctl_feature_info,
|
|
.get = mixer_ctl_feature_get,
|
|
.put = mixer_ctl_feature_put,
|
|
};
|
|
|
|
/* the read-only variant */
|
|
static struct snd_kcontrol_new usb_feature_unit_ctl_ro = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "", /* will be filled later manually */
|
|
.info = mixer_ctl_feature_info,
|
|
.get = mixer_ctl_feature_get,
|
|
.put = NULL,
|
|
};
|
|
|
|
/*
|
|
* This symbol is exported in order to allow the mixer quirks to
|
|
* hook up to the standard feature unit control mechanism
|
|
*/
|
|
struct snd_kcontrol_new *snd_usb_feature_unit_ctl = &usb_feature_unit_ctl;
|
|
|
|
/*
|
|
* build a feature control
|
|
*/
|
|
static size_t append_ctl_name(struct snd_kcontrol *kctl, const char *str)
|
|
{
|
|
return strlcat(kctl->id.name, str, sizeof(kctl->id.name));
|
|
}
|
|
|
|
/*
|
|
* A lot of headsets/headphones have a "Speaker" mixer. Make sure we
|
|
* rename it to "Headphone". We determine if something is a headphone
|
|
* similar to how udev determines form factor.
|
|
*/
|
|
static void check_no_speaker_on_headset(struct snd_kcontrol *kctl,
|
|
struct snd_card *card)
|
|
{
|
|
const char *names_to_check[] = {
|
|
"Headset", "headset", "Headphone", "headphone", NULL};
|
|
const char **s;
|
|
bool found = false;
|
|
|
|
if (strcmp("Speaker", kctl->id.name))
|
|
return;
|
|
|
|
for (s = names_to_check; *s; s++)
|
|
if (strstr(card->shortname, *s)) {
|
|
found = true;
|
|
break;
|
|
}
|
|
|
|
if (!found)
|
|
return;
|
|
|
|
strlcpy(kctl->id.name, "Headphone", sizeof(kctl->id.name));
|
|
}
|
|
|
|
static void build_feature_ctl(struct mixer_build *state, void *raw_desc,
|
|
unsigned int ctl_mask, int control,
|
|
struct usb_audio_term *iterm, int unitid,
|
|
int readonly_mask)
|
|
{
|
|
struct uac_feature_unit_descriptor *desc = raw_desc;
|
|
struct usb_feature_control_info *ctl_info;
|
|
unsigned int len = 0;
|
|
int mapped_name = 0;
|
|
int nameid = uac_feature_unit_iFeature(desc);
|
|
struct snd_kcontrol *kctl;
|
|
struct usb_mixer_elem_info *cval;
|
|
const struct usbmix_name_map *map;
|
|
unsigned int range;
|
|
|
|
control++; /* change from zero-based to 1-based value */
|
|
|
|
if (control == UAC_FU_GRAPHIC_EQUALIZER) {
|
|
/* FIXME: not supported yet */
|
|
return;
|
|
}
|
|
|
|
map = find_map(state, unitid, control);
|
|
if (check_ignored_ctl(map))
|
|
return;
|
|
|
|
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
|
|
if (!cval)
|
|
return;
|
|
snd_usb_mixer_elem_init_std(&cval->head, state->mixer, unitid);
|
|
cval->control = control;
|
|
cval->cmask = ctl_mask;
|
|
ctl_info = &audio_feature_info[control-1];
|
|
if (state->mixer->protocol == UAC_VERSION_1)
|
|
cval->val_type = ctl_info->type;
|
|
else /* UAC_VERSION_2 */
|
|
cval->val_type = ctl_info->type_uac2 >= 0 ?
|
|
ctl_info->type_uac2 : ctl_info->type;
|
|
|
|
if (ctl_mask == 0) {
|
|
cval->channels = 1; /* master channel */
|
|
cval->master_readonly = readonly_mask;
|
|
} else {
|
|
int i, c = 0;
|
|
for (i = 0; i < 16; i++)
|
|
if (ctl_mask & (1 << i))
|
|
c++;
|
|
cval->channels = c;
|
|
cval->ch_readonly = readonly_mask;
|
|
}
|
|
|
|
/*
|
|
* If all channels in the mask are marked read-only, make the control
|
|
* read-only. snd_usb_set_cur_mix_value() will check the mask again and won't
|
|
* issue write commands to read-only channels.
|
|
*/
|
|
if (cval->channels == readonly_mask)
|
|
kctl = snd_ctl_new1(&usb_feature_unit_ctl_ro, cval);
|
|
else
|
|
kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
|
|
|
|
if (!kctl) {
|
|
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
|
|
kfree(cval);
|
|
return;
|
|
}
|
|
kctl->private_free = snd_usb_mixer_elem_free;
|
|
|
|
len = check_mapped_name(map, kctl->id.name, sizeof(kctl->id.name));
|
|
mapped_name = len != 0;
|
|
if (!len && nameid)
|
|
len = snd_usb_copy_string_desc(state, nameid,
|
|
kctl->id.name, sizeof(kctl->id.name));
|
|
|
|
switch (control) {
|
|
case UAC_FU_MUTE:
|
|
case UAC_FU_VOLUME:
|
|
/*
|
|
* determine the control name. the rule is:
|
|
* - if a name id is given in descriptor, use it.
|
|
* - if the connected input can be determined, then use the name
|
|
* of terminal type.
|
|
* - if the connected output can be determined, use it.
|
|
* - otherwise, anonymous name.
|
|
*/
|
|
if (!len) {
|
|
len = get_term_name(state, iterm, kctl->id.name,
|
|
sizeof(kctl->id.name), 1);
|
|
if (!len)
|
|
len = get_term_name(state, &state->oterm,
|
|
kctl->id.name,
|
|
sizeof(kctl->id.name), 1);
|
|
if (!len)
|
|
snprintf(kctl->id.name, sizeof(kctl->id.name),
|
|
"Feature %d", unitid);
|
|
}
|
|
|
|
if (!mapped_name)
|
|
check_no_speaker_on_headset(kctl, state->mixer->chip->card);
|
|
|
|
/*
|
|
* determine the stream direction:
|
|
* if the connected output is USB stream, then it's likely a
|
|
* capture stream. otherwise it should be playback (hopefully :)
|
|
*/
|
|
if (!mapped_name && !(state->oterm.type >> 16)) {
|
|
if ((state->oterm.type & 0xff00) == 0x0100)
|
|
append_ctl_name(kctl, " Capture");
|
|
else
|
|
append_ctl_name(kctl, " Playback");
|
|
}
|
|
append_ctl_name(kctl, control == UAC_FU_MUTE ?
|
|
" Switch" : " Volume");
|
|
break;
|
|
default:
|
|
if (!len)
|
|
strlcpy(kctl->id.name, audio_feature_info[control-1].name,
|
|
sizeof(kctl->id.name));
|
|
break;
|
|
}
|
|
|
|
/* get min/max values */
|
|
get_min_max_with_quirks(cval, 0, kctl);
|
|
|
|
if (control == UAC_FU_VOLUME) {
|
|
check_mapped_dB(map, cval);
|
|
if (cval->dBmin < cval->dBmax || !cval->initialized) {
|
|
kctl->tlv.c = snd_usb_mixer_vol_tlv;
|
|
kctl->vd[0].access |=
|
|
SNDRV_CTL_ELEM_ACCESS_TLV_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK;
|
|
}
|
|
}
|
|
|
|
snd_usb_mixer_fu_apply_quirk(state->mixer, cval, unitid, kctl);
|
|
|
|
range = (cval->max - cval->min) / cval->res;
|
|
/*
|
|
* Are there devices with volume range more than 255? I use a bit more
|
|
* to be sure. 384 is a resolution magic number found on Logitech
|
|
* devices. It will definitively catch all buggy Logitech devices.
|
|
*/
|
|
if (range > 384) {
|
|
usb_audio_warn(state->chip,
|
|
"Warning! Unlikely big volume range (=%u), cval->res is probably wrong.",
|
|
range);
|
|
usb_audio_warn(state->chip,
|
|
"[%d] FU [%s] ch = %d, val = %d/%d/%d",
|
|
cval->head.id, kctl->id.name, cval->channels,
|
|
cval->min, cval->max, cval->res);
|
|
}
|
|
|
|
usb_audio_dbg(state->chip, "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
|
|
cval->head.id, kctl->id.name, cval->channels,
|
|
cval->min, cval->max, cval->res);
|
|
snd_usb_mixer_add_control(&cval->head, kctl);
|
|
}
|
|
|
|
/*
|
|
* parse a feature unit
|
|
*
|
|
* most of controls are defined here.
|
|
*/
|
|
static int parse_audio_feature_unit(struct mixer_build *state, int unitid,
|
|
void *_ftr)
|
|
{
|
|
int channels, i, j;
|
|
struct usb_audio_term iterm;
|
|
unsigned int master_bits, first_ch_bits;
|
|
int err, csize;
|
|
struct uac_feature_unit_descriptor *hdr = _ftr;
|
|
__u8 *bmaControls;
|
|
|
|
if (state->mixer->protocol == UAC_VERSION_1) {
|
|
csize = hdr->bControlSize;
|
|
if (!csize) {
|
|
usb_audio_dbg(state->chip,
|
|
"unit %u: invalid bControlSize == 0\n",
|
|
unitid);
|
|
return -EINVAL;
|
|
}
|
|
channels = (hdr->bLength - 7) / csize - 1;
|
|
bmaControls = hdr->bmaControls;
|
|
if (hdr->bLength < 7 + csize) {
|
|
usb_audio_err(state->chip,
|
|
"unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
|
|
unitid);
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
struct uac2_feature_unit_descriptor *ftr = _ftr;
|
|
csize = 4;
|
|
channels = (hdr->bLength - 6) / 4 - 1;
|
|
bmaControls = ftr->bmaControls;
|
|
if (hdr->bLength < 6 + csize) {
|
|
usb_audio_err(state->chip,
|
|
"unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
|
|
unitid);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* parse the source unit */
|
|
if ((err = parse_audio_unit(state, hdr->bSourceID)) < 0)
|
|
return err;
|
|
|
|
/* determine the input source type and name */
|
|
err = check_input_term(state, hdr->bSourceID, &iterm);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
master_bits = snd_usb_combine_bytes(bmaControls, csize);
|
|
/* master configuration quirks */
|
|
switch (state->chip->usb_id) {
|
|
case USB_ID(0x08bb, 0x2702):
|
|
usb_audio_info(state->chip,
|
|
"usbmixer: master volume quirk for PCM2702 chip\n");
|
|
/* disable non-functional volume control */
|
|
master_bits &= ~UAC_CONTROL_BIT(UAC_FU_VOLUME);
|
|
break;
|
|
case USB_ID(0x1130, 0xf211):
|
|
usb_audio_info(state->chip,
|
|
"usbmixer: volume control quirk for Tenx TP6911 Audio Headset\n");
|
|
/* disable non-functional volume control */
|
|
channels = 0;
|
|
break;
|
|
|
|
}
|
|
if (channels > 0)
|
|
first_ch_bits = snd_usb_combine_bytes(bmaControls + csize, csize);
|
|
else
|
|
first_ch_bits = 0;
|
|
|
|
if (state->mixer->protocol == UAC_VERSION_1) {
|
|
/* check all control types */
|
|
for (i = 0; i < 10; i++) {
|
|
unsigned int ch_bits = 0;
|
|
for (j = 0; j < channels; j++) {
|
|
unsigned int mask;
|
|
|
|
mask = snd_usb_combine_bytes(bmaControls +
|
|
csize * (j+1), csize);
|
|
if (mask & (1 << i))
|
|
ch_bits |= (1 << j);
|
|
}
|
|
/* audio class v1 controls are never read-only */
|
|
|
|
/*
|
|
* The first channel must be set
|
|
* (for ease of programming).
|
|
*/
|
|
if (ch_bits & 1)
|
|
build_feature_ctl(state, _ftr, ch_bits, i,
|
|
&iterm, unitid, 0);
|
|
if (master_bits & (1 << i))
|
|
build_feature_ctl(state, _ftr, 0, i, &iterm,
|
|
unitid, 0);
|
|
}
|
|
} else { /* UAC_VERSION_2 */
|
|
for (i = 0; i < ARRAY_SIZE(audio_feature_info); i++) {
|
|
unsigned int ch_bits = 0;
|
|
unsigned int ch_read_only = 0;
|
|
|
|
for (j = 0; j < channels; j++) {
|
|
unsigned int mask;
|
|
|
|
mask = snd_usb_combine_bytes(bmaControls +
|
|
csize * (j+1), csize);
|
|
if (uac2_control_is_readable(mask, i)) {
|
|
ch_bits |= (1 << j);
|
|
if (!uac2_control_is_writeable(mask, i))
|
|
ch_read_only |= (1 << j);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* NOTE: build_feature_ctl() will mark the control
|
|
* read-only if all channels are marked read-only in
|
|
* the descriptors. Otherwise, the control will be
|
|
* reported as writeable, but the driver will not
|
|
* actually issue a write command for read-only
|
|
* channels.
|
|
*/
|
|
|
|
/*
|
|
* The first channel must be set
|
|
* (for ease of programming).
|
|
*/
|
|
if (ch_bits & 1)
|
|
build_feature_ctl(state, _ftr, ch_bits, i,
|
|
&iterm, unitid, ch_read_only);
|
|
if (uac2_control_is_readable(master_bits, i))
|
|
build_feature_ctl(state, _ftr, 0, i, &iterm, unitid,
|
|
!uac2_control_is_writeable(master_bits, i));
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Mixer Unit
|
|
*/
|
|
|
|
/*
|
|
* build a mixer unit control
|
|
*
|
|
* the callbacks are identical with feature unit.
|
|
* input channel number (zero based) is given in control field instead.
|
|
*/
|
|
static void build_mixer_unit_ctl(struct mixer_build *state,
|
|
struct uac_mixer_unit_descriptor *desc,
|
|
int in_pin, int in_ch, int unitid,
|
|
struct usb_audio_term *iterm)
|
|
{
|
|
struct usb_mixer_elem_info *cval;
|
|
unsigned int num_outs = uac_mixer_unit_bNrChannels(desc);
|
|
unsigned int i, len;
|
|
struct snd_kcontrol *kctl;
|
|
const struct usbmix_name_map *map;
|
|
|
|
map = find_map(state, unitid, 0);
|
|
if (check_ignored_ctl(map))
|
|
return;
|
|
|
|
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
|
|
if (!cval)
|
|
return;
|
|
|
|
snd_usb_mixer_elem_init_std(&cval->head, state->mixer, unitid);
|
|
cval->control = in_ch + 1; /* based on 1 */
|
|
cval->val_type = USB_MIXER_S16;
|
|
for (i = 0; i < num_outs; i++) {
|
|
__u8 *c = uac_mixer_unit_bmControls(desc, state->mixer->protocol);
|
|
|
|
if (check_matrix_bitmap(c, in_ch, i, num_outs)) {
|
|
cval->cmask |= (1 << i);
|
|
cval->channels++;
|
|
}
|
|
}
|
|
|
|
/* get min/max values */
|
|
get_min_max(cval, 0);
|
|
|
|
kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
|
|
if (!kctl) {
|
|
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
|
|
kfree(cval);
|
|
return;
|
|
}
|
|
kctl->private_free = snd_usb_mixer_elem_free;
|
|
|
|
len = check_mapped_name(map, kctl->id.name, sizeof(kctl->id.name));
|
|
if (!len)
|
|
len = get_term_name(state, iterm, kctl->id.name,
|
|
sizeof(kctl->id.name), 0);
|
|
if (!len)
|
|
len = sprintf(kctl->id.name, "Mixer Source %d", in_ch + 1);
|
|
append_ctl_name(kctl, " Volume");
|
|
|
|
usb_audio_dbg(state->chip, "[%d] MU [%s] ch = %d, val = %d/%d\n",
|
|
cval->head.id, kctl->id.name, cval->channels, cval->min, cval->max);
|
|
snd_usb_mixer_add_control(&cval->head, kctl);
|
|
}
|
|
|
|
/*
|
|
* parse a mixer unit
|
|
*/
|
|
static int parse_audio_mixer_unit(struct mixer_build *state, int unitid,
|
|
void *raw_desc)
|
|
{
|
|
struct uac_mixer_unit_descriptor *desc = raw_desc;
|
|
struct usb_audio_term iterm;
|
|
int input_pins, num_ins, num_outs;
|
|
int pin, ich, err;
|
|
|
|
if (desc->bLength < 11 || !(input_pins = desc->bNrInPins) ||
|
|
!(num_outs = uac_mixer_unit_bNrChannels(desc))) {
|
|
usb_audio_err(state->chip,
|
|
"invalid MIXER UNIT descriptor %d\n",
|
|
unitid);
|
|
return -EINVAL;
|
|
}
|
|
|
|
num_ins = 0;
|
|
ich = 0;
|
|
for (pin = 0; pin < input_pins; pin++) {
|
|
err = parse_audio_unit(state, desc->baSourceID[pin]);
|
|
if (err < 0)
|
|
continue;
|
|
/* no bmControls field (e.g. Maya44) -> ignore */
|
|
if (desc->bLength <= 10 + input_pins)
|
|
continue;
|
|
err = check_input_term(state, desc->baSourceID[pin], &iterm);
|
|
if (err < 0)
|
|
return err;
|
|
num_ins += iterm.channels;
|
|
for (; ich < num_ins; ich++) {
|
|
int och, ich_has_controls = 0;
|
|
|
|
for (och = 0; och < num_outs; och++) {
|
|
__u8 *c = uac_mixer_unit_bmControls(desc,
|
|
state->mixer->protocol);
|
|
|
|
if (check_matrix_bitmap(c, ich, och, num_outs)) {
|
|
ich_has_controls = 1;
|
|
break;
|
|
}
|
|
}
|
|
if (ich_has_controls)
|
|
build_mixer_unit_ctl(state, desc, pin, ich,
|
|
unitid, &iterm);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Processing Unit / Extension Unit
|
|
*/
|
|
|
|
/* get callback for processing/extension unit */
|
|
static int mixer_ctl_procunit_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct usb_mixer_elem_info *cval = kcontrol->private_data;
|
|
int err, val;
|
|
|
|
err = get_cur_ctl_value(cval, cval->control << 8, &val);
|
|
if (err < 0) {
|
|
ucontrol->value.integer.value[0] = cval->min;
|
|
return filter_error(cval, err);
|
|
}
|
|
val = get_relative_value(cval, val);
|
|
ucontrol->value.integer.value[0] = val;
|
|
return 0;
|
|
}
|
|
|
|
/* put callback for processing/extension unit */
|
|
static int mixer_ctl_procunit_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct usb_mixer_elem_info *cval = kcontrol->private_data;
|
|
int val, oval, err;
|
|
|
|
err = get_cur_ctl_value(cval, cval->control << 8, &oval);
|
|
if (err < 0)
|
|
return filter_error(cval, err);
|
|
val = ucontrol->value.integer.value[0];
|
|
val = get_abs_value(cval, val);
|
|
if (val != oval) {
|
|
set_cur_ctl_value(cval, cval->control << 8, val);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* alsa control interface for processing/extension unit */
|
|
static struct snd_kcontrol_new mixer_procunit_ctl = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "", /* will be filled later */
|
|
.info = mixer_ctl_feature_info,
|
|
.get = mixer_ctl_procunit_get,
|
|
.put = mixer_ctl_procunit_put,
|
|
};
|
|
|
|
/*
|
|
* predefined data for processing units
|
|
*/
|
|
struct procunit_value_info {
|
|
int control;
|
|
char *suffix;
|
|
int val_type;
|
|
int min_value;
|
|
};
|
|
|
|
struct procunit_info {
|
|
int type;
|
|
char *name;
|
|
struct procunit_value_info *values;
|
|
};
|
|
|
|
static struct procunit_value_info updown_proc_info[] = {
|
|
{ UAC_UD_ENABLE, "Switch", USB_MIXER_BOOLEAN },
|
|
{ UAC_UD_MODE_SELECT, "Mode Select", USB_MIXER_U8, 1 },
|
|
{ 0 }
|
|
};
|
|
static struct procunit_value_info prologic_proc_info[] = {
|
|
{ UAC_DP_ENABLE, "Switch", USB_MIXER_BOOLEAN },
|
|
{ UAC_DP_MODE_SELECT, "Mode Select", USB_MIXER_U8, 1 },
|
|
{ 0 }
|
|
};
|
|
static struct procunit_value_info threed_enh_proc_info[] = {
|
|
{ UAC_3D_ENABLE, "Switch", USB_MIXER_BOOLEAN },
|
|
{ UAC_3D_SPACE, "Spaciousness", USB_MIXER_U8 },
|
|
{ 0 }
|
|
};
|
|
static struct procunit_value_info reverb_proc_info[] = {
|
|
{ UAC_REVERB_ENABLE, "Switch", USB_MIXER_BOOLEAN },
|
|
{ UAC_REVERB_LEVEL, "Level", USB_MIXER_U8 },
|
|
{ UAC_REVERB_TIME, "Time", USB_MIXER_U16 },
|
|
{ UAC_REVERB_FEEDBACK, "Feedback", USB_MIXER_U8 },
|
|
{ 0 }
|
|
};
|
|
static struct procunit_value_info chorus_proc_info[] = {
|
|
{ UAC_CHORUS_ENABLE, "Switch", USB_MIXER_BOOLEAN },
|
|
{ UAC_CHORUS_LEVEL, "Level", USB_MIXER_U8 },
|
|
{ UAC_CHORUS_RATE, "Rate", USB_MIXER_U16 },
|
|
{ UAC_CHORUS_DEPTH, "Depth", USB_MIXER_U16 },
|
|
{ 0 }
|
|
};
|
|
static struct procunit_value_info dcr_proc_info[] = {
|
|
{ UAC_DCR_ENABLE, "Switch", USB_MIXER_BOOLEAN },
|
|
{ UAC_DCR_RATE, "Ratio", USB_MIXER_U16 },
|
|
{ UAC_DCR_MAXAMPL, "Max Amp", USB_MIXER_S16 },
|
|
{ UAC_DCR_THRESHOLD, "Threshold", USB_MIXER_S16 },
|
|
{ UAC_DCR_ATTACK_TIME, "Attack Time", USB_MIXER_U16 },
|
|
{ UAC_DCR_RELEASE_TIME, "Release Time", USB_MIXER_U16 },
|
|
{ 0 }
|
|
};
|
|
|
|
static struct procunit_info procunits[] = {
|
|
{ UAC_PROCESS_UP_DOWNMIX, "Up Down", updown_proc_info },
|
|
{ UAC_PROCESS_DOLBY_PROLOGIC, "Dolby Prologic", prologic_proc_info },
|
|
{ UAC_PROCESS_STEREO_EXTENDER, "3D Stereo Extender", threed_enh_proc_info },
|
|
{ UAC_PROCESS_REVERB, "Reverb", reverb_proc_info },
|
|
{ UAC_PROCESS_CHORUS, "Chorus", chorus_proc_info },
|
|
{ UAC_PROCESS_DYN_RANGE_COMP, "DCR", dcr_proc_info },
|
|
{ 0 },
|
|
};
|
|
/*
|
|
* predefined data for extension units
|
|
*/
|
|
static struct procunit_value_info clock_rate_xu_info[] = {
|
|
{ USB_XU_CLOCK_RATE_SELECTOR, "Selector", USB_MIXER_U8, 0 },
|
|
{ 0 }
|
|
};
|
|
static struct procunit_value_info clock_source_xu_info[] = {
|
|
{ USB_XU_CLOCK_SOURCE_SELECTOR, "External", USB_MIXER_BOOLEAN },
|
|
{ 0 }
|
|
};
|
|
static struct procunit_value_info spdif_format_xu_info[] = {
|
|
{ USB_XU_DIGITAL_FORMAT_SELECTOR, "SPDIF/AC3", USB_MIXER_BOOLEAN },
|
|
{ 0 }
|
|
};
|
|
static struct procunit_value_info soft_limit_xu_info[] = {
|
|
{ USB_XU_SOFT_LIMIT_SELECTOR, " ", USB_MIXER_BOOLEAN },
|
|
{ 0 }
|
|
};
|
|
static struct procunit_info extunits[] = {
|
|
{ USB_XU_CLOCK_RATE, "Clock rate", clock_rate_xu_info },
|
|
{ USB_XU_CLOCK_SOURCE, "DigitalIn CLK source", clock_source_xu_info },
|
|
{ USB_XU_DIGITAL_IO_STATUS, "DigitalOut format:", spdif_format_xu_info },
|
|
{ USB_XU_DEVICE_OPTIONS, "AnalogueIn Soft Limit", soft_limit_xu_info },
|
|
{ 0 }
|
|
};
|
|
|
|
/*
|
|
* build a processing/extension unit
|
|
*/
|
|
static int build_audio_procunit(struct mixer_build *state, int unitid,
|
|
void *raw_desc, struct procunit_info *list,
|
|
char *name)
|
|
{
|
|
struct uac_processing_unit_descriptor *desc = raw_desc;
|
|
int num_ins = desc->bNrInPins;
|
|
struct usb_mixer_elem_info *cval;
|
|
struct snd_kcontrol *kctl;
|
|
int i, err, nameid, type, len;
|
|
struct procunit_info *info;
|
|
struct procunit_value_info *valinfo;
|
|
const struct usbmix_name_map *map;
|
|
static struct procunit_value_info default_value_info[] = {
|
|
{ 0x01, "Switch", USB_MIXER_BOOLEAN },
|
|
{ 0 }
|
|
};
|
|
static struct procunit_info default_info = {
|
|
0, NULL, default_value_info
|
|
};
|
|
|
|
if (desc->bLength < 13 || desc->bLength < 13 + num_ins ||
|
|
desc->bLength < num_ins + uac_processing_unit_bControlSize(desc, state->mixer->protocol)) {
|
|
usb_audio_err(state->chip, "invalid %s descriptor (id %d)\n", name, unitid);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < num_ins; i++) {
|
|
if ((err = parse_audio_unit(state, desc->baSourceID[i])) < 0)
|
|
return err;
|
|
}
|
|
|
|
type = le16_to_cpu(desc->wProcessType);
|
|
for (info = list; info && info->type; info++)
|
|
if (info->type == type)
|
|
break;
|
|
if (!info || !info->type)
|
|
info = &default_info;
|
|
|
|
for (valinfo = info->values; valinfo->control; valinfo++) {
|
|
__u8 *controls = uac_processing_unit_bmControls(desc, state->mixer->protocol);
|
|
|
|
if (!(controls[valinfo->control / 8] & (1 << ((valinfo->control % 8) - 1))))
|
|
continue;
|
|
map = find_map(state, unitid, valinfo->control);
|
|
if (check_ignored_ctl(map))
|
|
continue;
|
|
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
|
|
if (!cval)
|
|
return -ENOMEM;
|
|
snd_usb_mixer_elem_init_std(&cval->head, state->mixer, unitid);
|
|
cval->control = valinfo->control;
|
|
cval->val_type = valinfo->val_type;
|
|
cval->channels = 1;
|
|
|
|
/* get min/max values */
|
|
if (type == UAC_PROCESS_UP_DOWNMIX && cval->control == UAC_UD_MODE_SELECT) {
|
|
__u8 *control_spec = uac_processing_unit_specific(desc, state->mixer->protocol);
|
|
/* FIXME: hard-coded */
|
|
cval->min = 1;
|
|
cval->max = control_spec[0];
|
|
cval->res = 1;
|
|
cval->initialized = 1;
|
|
} else {
|
|
if (type == USB_XU_CLOCK_RATE) {
|
|
/*
|
|
* E-Mu USB 0404/0202/TrackerPre/0204
|
|
* samplerate control quirk
|
|
*/
|
|
cval->min = 0;
|
|
cval->max = 5;
|
|
cval->res = 1;
|
|
cval->initialized = 1;
|
|
} else
|
|
get_min_max(cval, valinfo->min_value);
|
|
}
|
|
|
|
kctl = snd_ctl_new1(&mixer_procunit_ctl, cval);
|
|
if (!kctl) {
|
|
kfree(cval);
|
|
return -ENOMEM;
|
|
}
|
|
kctl->private_free = snd_usb_mixer_elem_free;
|
|
|
|
if (check_mapped_name(map, kctl->id.name, sizeof(kctl->id.name))) {
|
|
/* nothing */ ;
|
|
} else if (info->name) {
|
|
strlcpy(kctl->id.name, info->name, sizeof(kctl->id.name));
|
|
} else {
|
|
nameid = uac_processing_unit_iProcessing(desc, state->mixer->protocol);
|
|
len = 0;
|
|
if (nameid)
|
|
len = snd_usb_copy_string_desc(state, nameid,
|
|
kctl->id.name,
|
|
sizeof(kctl->id.name));
|
|
if (!len)
|
|
strlcpy(kctl->id.name, name, sizeof(kctl->id.name));
|
|
}
|
|
append_ctl_name(kctl, " ");
|
|
append_ctl_name(kctl, valinfo->suffix);
|
|
|
|
usb_audio_dbg(state->chip,
|
|
"[%d] PU [%s] ch = %d, val = %d/%d\n",
|
|
cval->head.id, kctl->id.name, cval->channels,
|
|
cval->min, cval->max);
|
|
|
|
err = snd_usb_mixer_add_control(&cval->head, kctl);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int parse_audio_processing_unit(struct mixer_build *state, int unitid,
|
|
void *raw_desc)
|
|
{
|
|
return build_audio_procunit(state, unitid, raw_desc,
|
|
procunits, "Processing Unit");
|
|
}
|
|
|
|
static int parse_audio_extension_unit(struct mixer_build *state, int unitid,
|
|
void *raw_desc)
|
|
{
|
|
/*
|
|
* Note that we parse extension units with processing unit descriptors.
|
|
* That's ok as the layout is the same.
|
|
*/
|
|
return build_audio_procunit(state, unitid, raw_desc,
|
|
extunits, "Extension Unit");
|
|
}
|
|
|
|
/*
|
|
* Selector Unit
|
|
*/
|
|
|
|
/*
|
|
* info callback for selector unit
|
|
* use an enumerator type for routing
|
|
*/
|
|
static int mixer_ctl_selector_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
struct usb_mixer_elem_info *cval = kcontrol->private_data;
|
|
const char **itemlist = (const char **)kcontrol->private_value;
|
|
|
|
if (snd_BUG_ON(!itemlist))
|
|
return -EINVAL;
|
|
return snd_ctl_enum_info(uinfo, 1, cval->max, itemlist);
|
|
}
|
|
|
|
/* get callback for selector unit */
|
|
static int mixer_ctl_selector_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct usb_mixer_elem_info *cval = kcontrol->private_data;
|
|
int val, err;
|
|
|
|
err = get_cur_ctl_value(cval, cval->control << 8, &val);
|
|
if (err < 0) {
|
|
ucontrol->value.enumerated.item[0] = 0;
|
|
return filter_error(cval, err);
|
|
}
|
|
val = get_relative_value(cval, val);
|
|
ucontrol->value.enumerated.item[0] = val;
|
|
return 0;
|
|
}
|
|
|
|
/* put callback for selector unit */
|
|
static int mixer_ctl_selector_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct usb_mixer_elem_info *cval = kcontrol->private_data;
|
|
int val, oval, err;
|
|
|
|
err = get_cur_ctl_value(cval, cval->control << 8, &oval);
|
|
if (err < 0)
|
|
return filter_error(cval, err);
|
|
val = ucontrol->value.enumerated.item[0];
|
|
val = get_abs_value(cval, val);
|
|
if (val != oval) {
|
|
set_cur_ctl_value(cval, cval->control << 8, val);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* alsa control interface for selector unit */
|
|
static struct snd_kcontrol_new mixer_selectunit_ctl = {
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "", /* will be filled later */
|
|
.info = mixer_ctl_selector_info,
|
|
.get = mixer_ctl_selector_get,
|
|
.put = mixer_ctl_selector_put,
|
|
};
|
|
|
|
/*
|
|
* private free callback.
|
|
* free both private_data and private_value
|
|
*/
|
|
static void usb_mixer_selector_elem_free(struct snd_kcontrol *kctl)
|
|
{
|
|
int i, num_ins = 0;
|
|
|
|
if (kctl->private_data) {
|
|
struct usb_mixer_elem_info *cval = kctl->private_data;
|
|
num_ins = cval->max;
|
|
kfree(cval);
|
|
kctl->private_data = NULL;
|
|
}
|
|
if (kctl->private_value) {
|
|
char **itemlist = (char **)kctl->private_value;
|
|
for (i = 0; i < num_ins; i++)
|
|
kfree(itemlist[i]);
|
|
kfree(itemlist);
|
|
kctl->private_value = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* parse a selector unit
|
|
*/
|
|
static int parse_audio_selector_unit(struct mixer_build *state, int unitid,
|
|
void *raw_desc)
|
|
{
|
|
struct uac_selector_unit_descriptor *desc = raw_desc;
|
|
unsigned int i, nameid, len;
|
|
int err;
|
|
struct usb_mixer_elem_info *cval;
|
|
struct snd_kcontrol *kctl;
|
|
const struct usbmix_name_map *map;
|
|
char **namelist;
|
|
|
|
if (!desc->bNrInPins || desc->bLength < 5 + desc->bNrInPins) {
|
|
usb_audio_err(state->chip,
|
|
"invalid SELECTOR UNIT descriptor %d\n", unitid);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < desc->bNrInPins; i++) {
|
|
if ((err = parse_audio_unit(state, desc->baSourceID[i])) < 0)
|
|
return err;
|
|
}
|
|
|
|
if (desc->bNrInPins == 1) /* only one ? nonsense! */
|
|
return 0;
|
|
|
|
map = find_map(state, unitid, 0);
|
|
if (check_ignored_ctl(map))
|
|
return 0;
|
|
|
|
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
|
|
if (!cval)
|
|
return -ENOMEM;
|
|
snd_usb_mixer_elem_init_std(&cval->head, state->mixer, unitid);
|
|
cval->val_type = USB_MIXER_U8;
|
|
cval->channels = 1;
|
|
cval->min = 1;
|
|
cval->max = desc->bNrInPins;
|
|
cval->res = 1;
|
|
cval->initialized = 1;
|
|
|
|
if (state->mixer->protocol == UAC_VERSION_1)
|
|
cval->control = 0;
|
|
else /* UAC_VERSION_2 */
|
|
cval->control = (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR) ?
|
|
UAC2_CX_CLOCK_SELECTOR : UAC2_SU_SELECTOR;
|
|
|
|
namelist = kmalloc(sizeof(char *) * desc->bNrInPins, GFP_KERNEL);
|
|
if (!namelist) {
|
|
kfree(cval);
|
|
return -ENOMEM;
|
|
}
|
|
#define MAX_ITEM_NAME_LEN 64
|
|
for (i = 0; i < desc->bNrInPins; i++) {
|
|
struct usb_audio_term iterm;
|
|
len = 0;
|
|
namelist[i] = kmalloc(MAX_ITEM_NAME_LEN, GFP_KERNEL);
|
|
if (!namelist[i]) {
|
|
while (i--)
|
|
kfree(namelist[i]);
|
|
kfree(namelist);
|
|
kfree(cval);
|
|
return -ENOMEM;
|
|
}
|
|
len = check_mapped_selector_name(state, unitid, i, namelist[i],
|
|
MAX_ITEM_NAME_LEN);
|
|
if (! len && check_input_term(state, desc->baSourceID[i], &iterm) >= 0)
|
|
len = get_term_name(state, &iterm, namelist[i], MAX_ITEM_NAME_LEN, 0);
|
|
if (! len)
|
|
sprintf(namelist[i], "Input %u", i);
|
|
}
|
|
|
|
kctl = snd_ctl_new1(&mixer_selectunit_ctl, cval);
|
|
if (! kctl) {
|
|
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
|
|
kfree(namelist);
|
|
kfree(cval);
|
|
return -ENOMEM;
|
|
}
|
|
kctl->private_value = (unsigned long)namelist;
|
|
kctl->private_free = usb_mixer_selector_elem_free;
|
|
|
|
nameid = uac_selector_unit_iSelector(desc);
|
|
len = check_mapped_name(map, kctl->id.name, sizeof(kctl->id.name));
|
|
if (len)
|
|
;
|
|
else if (nameid)
|
|
snd_usb_copy_string_desc(state, nameid, kctl->id.name,
|
|
sizeof(kctl->id.name));
|
|
else {
|
|
len = get_term_name(state, &state->oterm,
|
|
kctl->id.name, sizeof(kctl->id.name), 0);
|
|
if (!len)
|
|
strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name));
|
|
|
|
if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
|
|
append_ctl_name(kctl, " Clock Source");
|
|
else if ((state->oterm.type & 0xff00) == 0x0100)
|
|
append_ctl_name(kctl, " Capture Source");
|
|
else
|
|
append_ctl_name(kctl, " Playback Source");
|
|
}
|
|
|
|
usb_audio_dbg(state->chip, "[%d] SU [%s] items = %d\n",
|
|
cval->head.id, kctl->id.name, desc->bNrInPins);
|
|
return snd_usb_mixer_add_control(&cval->head, kctl);
|
|
}
|
|
|
|
/*
|
|
* parse an audio unit recursively
|
|
*/
|
|
|
|
static int parse_audio_unit(struct mixer_build *state, int unitid)
|
|
{
|
|
unsigned char *p1;
|
|
|
|
if (test_and_set_bit(unitid, state->unitbitmap))
|
|
return 0; /* the unit already visited */
|
|
|
|
p1 = find_audio_control_unit(state, unitid);
|
|
if (!p1) {
|
|
usb_audio_err(state->chip, "unit %d not found!\n", unitid);
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (p1[2]) {
|
|
case UAC_INPUT_TERMINAL:
|
|
case UAC2_CLOCK_SOURCE:
|
|
return 0; /* NOP */
|
|
case UAC_MIXER_UNIT:
|
|
return parse_audio_mixer_unit(state, unitid, p1);
|
|
case UAC_SELECTOR_UNIT:
|
|
case UAC2_CLOCK_SELECTOR:
|
|
return parse_audio_selector_unit(state, unitid, p1);
|
|
case UAC_FEATURE_UNIT:
|
|
return parse_audio_feature_unit(state, unitid, p1);
|
|
case UAC1_PROCESSING_UNIT:
|
|
/* UAC2_EFFECT_UNIT has the same value */
|
|
if (state->mixer->protocol == UAC_VERSION_1)
|
|
return parse_audio_processing_unit(state, unitid, p1);
|
|
else
|
|
return 0; /* FIXME - effect units not implemented yet */
|
|
case UAC1_EXTENSION_UNIT:
|
|
/* UAC2_PROCESSING_UNIT_V2 has the same value */
|
|
if (state->mixer->protocol == UAC_VERSION_1)
|
|
return parse_audio_extension_unit(state, unitid, p1);
|
|
else /* UAC_VERSION_2 */
|
|
return parse_audio_processing_unit(state, unitid, p1);
|
|
case UAC2_EXTENSION_UNIT_V2:
|
|
return parse_audio_extension_unit(state, unitid, p1);
|
|
default:
|
|
usb_audio_err(state->chip,
|
|
"unit %u: unexpected type 0x%02x\n", unitid, p1[2]);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static void snd_usb_mixer_free(struct usb_mixer_interface *mixer)
|
|
{
|
|
kfree(mixer->id_elems);
|
|
if (mixer->urb) {
|
|
kfree(mixer->urb->transfer_buffer);
|
|
usb_free_urb(mixer->urb);
|
|
}
|
|
usb_free_urb(mixer->rc_urb);
|
|
kfree(mixer->rc_setup_packet);
|
|
kfree(mixer);
|
|
}
|
|
|
|
static int snd_usb_mixer_dev_free(struct snd_device *device)
|
|
{
|
|
struct usb_mixer_interface *mixer = device->device_data;
|
|
snd_usb_mixer_free(mixer);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* create mixer controls
|
|
*
|
|
* walk through all UAC_OUTPUT_TERMINAL descriptors to search for mixers
|
|
*/
|
|
static int snd_usb_mixer_controls(struct usb_mixer_interface *mixer)
|
|
{
|
|
struct mixer_build state;
|
|
int err;
|
|
const struct usbmix_ctl_map *map;
|
|
void *p;
|
|
|
|
memset(&state, 0, sizeof(state));
|
|
state.chip = mixer->chip;
|
|
state.mixer = mixer;
|
|
state.buffer = mixer->hostif->extra;
|
|
state.buflen = mixer->hostif->extralen;
|
|
|
|
/* check the mapping table */
|
|
for (map = usbmix_ctl_maps; map->id; map++) {
|
|
if (map->id == state.chip->usb_id) {
|
|
state.map = map->map;
|
|
state.selector_map = map->selector_map;
|
|
mixer->ignore_ctl_error = map->ignore_ctl_error;
|
|
break;
|
|
}
|
|
}
|
|
|
|
p = NULL;
|
|
while ((p = snd_usb_find_csint_desc(mixer->hostif->extra,
|
|
mixer->hostif->extralen,
|
|
p, UAC_OUTPUT_TERMINAL)) != NULL) {
|
|
if (mixer->protocol == UAC_VERSION_1) {
|
|
struct uac1_output_terminal_descriptor *desc = p;
|
|
|
|
if (desc->bLength < sizeof(*desc))
|
|
continue; /* invalid descriptor? */
|
|
/* mark terminal ID as visited */
|
|
set_bit(desc->bTerminalID, state.unitbitmap);
|
|
state.oterm.id = desc->bTerminalID;
|
|
state.oterm.type = le16_to_cpu(desc->wTerminalType);
|
|
state.oterm.name = desc->iTerminal;
|
|
err = parse_audio_unit(&state, desc->bSourceID);
|
|
if (err < 0 && err != -EINVAL)
|
|
return err;
|
|
} else { /* UAC_VERSION_2 */
|
|
struct uac2_output_terminal_descriptor *desc = p;
|
|
|
|
if (desc->bLength < sizeof(*desc))
|
|
continue; /* invalid descriptor? */
|
|
/* mark terminal ID as visited */
|
|
set_bit(desc->bTerminalID, state.unitbitmap);
|
|
state.oterm.id = desc->bTerminalID;
|
|
state.oterm.type = le16_to_cpu(desc->wTerminalType);
|
|
state.oterm.name = desc->iTerminal;
|
|
err = parse_audio_unit(&state, desc->bSourceID);
|
|
if (err < 0 && err != -EINVAL)
|
|
return err;
|
|
|
|
/*
|
|
* For UAC2, use the same approach to also add the
|
|
* clock selectors
|
|
*/
|
|
err = parse_audio_unit(&state, desc->bCSourceID);
|
|
if (err < 0 && err != -EINVAL)
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void snd_usb_mixer_notify_id(struct usb_mixer_interface *mixer, int unitid)
|
|
{
|
|
struct usb_mixer_elem_list *list;
|
|
|
|
for (list = mixer->id_elems[unitid]; list; list = list->next_id_elem)
|
|
snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE,
|
|
&list->kctl->id);
|
|
}
|
|
|
|
static void snd_usb_mixer_dump_cval(struct snd_info_buffer *buffer,
|
|
struct usb_mixer_elem_list *list)
|
|
{
|
|
struct usb_mixer_elem_info *cval = (struct usb_mixer_elem_info *)list;
|
|
static char *val_types[] = {"BOOLEAN", "INV_BOOLEAN",
|
|
"S8", "U8", "S16", "U16"};
|
|
snd_iprintf(buffer, " Info: id=%i, control=%i, cmask=0x%x, "
|
|
"channels=%i, type=\"%s\"\n", cval->head.id,
|
|
cval->control, cval->cmask, cval->channels,
|
|
val_types[cval->val_type]);
|
|
snd_iprintf(buffer, " Volume: min=%i, max=%i, dBmin=%i, dBmax=%i\n",
|
|
cval->min, cval->max, cval->dBmin, cval->dBmax);
|
|
}
|
|
|
|
static void snd_usb_mixer_proc_read(struct snd_info_entry *entry,
|
|
struct snd_info_buffer *buffer)
|
|
{
|
|
struct snd_usb_audio *chip = entry->private_data;
|
|
struct usb_mixer_interface *mixer;
|
|
struct usb_mixer_elem_list *list;
|
|
int unitid;
|
|
|
|
list_for_each_entry(mixer, &chip->mixer_list, list) {
|
|
snd_iprintf(buffer,
|
|
"USB Mixer: usb_id=0x%08x, ctrlif=%i, ctlerr=%i\n",
|
|
chip->usb_id, snd_usb_ctrl_intf(chip),
|
|
mixer->ignore_ctl_error);
|
|
snd_iprintf(buffer, "Card: %s\n", chip->card->longname);
|
|
for (unitid = 0; unitid < MAX_ID_ELEMS; unitid++) {
|
|
for (list = mixer->id_elems[unitid]; list;
|
|
list = list->next_id_elem) {
|
|
snd_iprintf(buffer, " Unit: %i\n", list->id);
|
|
if (list->kctl)
|
|
snd_iprintf(buffer,
|
|
" Control: name=\"%s\", index=%i\n",
|
|
list->kctl->id.name,
|
|
list->kctl->id.index);
|
|
if (list->dump)
|
|
list->dump(buffer, list);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void snd_usb_mixer_interrupt_v2(struct usb_mixer_interface *mixer,
|
|
int attribute, int value, int index)
|
|
{
|
|
struct usb_mixer_elem_list *list;
|
|
__u8 unitid = (index >> 8) & 0xff;
|
|
__u8 control = (value >> 8) & 0xff;
|
|
__u8 channel = value & 0xff;
|
|
|
|
if (channel >= MAX_CHANNELS) {
|
|
usb_audio_dbg(mixer->chip,
|
|
"%s(): bogus channel number %d\n",
|
|
__func__, channel);
|
|
return;
|
|
}
|
|
|
|
for (list = mixer->id_elems[unitid]; list; list = list->next_id_elem) {
|
|
struct usb_mixer_elem_info *info;
|
|
|
|
if (!list->kctl)
|
|
continue;
|
|
|
|
info = (struct usb_mixer_elem_info *)list;
|
|
if (info->control != control)
|
|
continue;
|
|
|
|
switch (attribute) {
|
|
case UAC2_CS_CUR:
|
|
/* invalidate cache, so the value is read from the device */
|
|
if (channel)
|
|
info->cached &= ~(1 << channel);
|
|
else /* master channel */
|
|
info->cached = 0;
|
|
|
|
snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE,
|
|
&info->head.kctl->id);
|
|
break;
|
|
|
|
case UAC2_CS_RANGE:
|
|
/* TODO */
|
|
break;
|
|
|
|
case UAC2_CS_MEM:
|
|
/* TODO */
|
|
break;
|
|
|
|
default:
|
|
usb_audio_dbg(mixer->chip,
|
|
"unknown attribute %d in interrupt\n",
|
|
attribute);
|
|
break;
|
|
} /* switch */
|
|
}
|
|
}
|
|
|
|
static void snd_usb_mixer_interrupt(struct urb *urb)
|
|
{
|
|
struct usb_mixer_interface *mixer = urb->context;
|
|
int len = urb->actual_length;
|
|
int ustatus = urb->status;
|
|
|
|
if (ustatus != 0)
|
|
goto requeue;
|
|
|
|
if (mixer->protocol == UAC_VERSION_1) {
|
|
struct uac1_status_word *status;
|
|
|
|
for (status = urb->transfer_buffer;
|
|
len >= sizeof(*status);
|
|
len -= sizeof(*status), status++) {
|
|
dev_dbg(&urb->dev->dev, "status interrupt: %02x %02x\n",
|
|
status->bStatusType,
|
|
status->bOriginator);
|
|
|
|
/* ignore any notifications not from the control interface */
|
|
if ((status->bStatusType & UAC1_STATUS_TYPE_ORIG_MASK) !=
|
|
UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF)
|
|
continue;
|
|
|
|
if (status->bStatusType & UAC1_STATUS_TYPE_MEM_CHANGED)
|
|
snd_usb_mixer_rc_memory_change(mixer, status->bOriginator);
|
|
else
|
|
snd_usb_mixer_notify_id(mixer, status->bOriginator);
|
|
}
|
|
} else { /* UAC_VERSION_2 */
|
|
struct uac2_interrupt_data_msg *msg;
|
|
|
|
for (msg = urb->transfer_buffer;
|
|
len >= sizeof(*msg);
|
|
len -= sizeof(*msg), msg++) {
|
|
/* drop vendor specific and endpoint requests */
|
|
if ((msg->bInfo & UAC2_INTERRUPT_DATA_MSG_VENDOR) ||
|
|
(msg->bInfo & UAC2_INTERRUPT_DATA_MSG_EP))
|
|
continue;
|
|
|
|
snd_usb_mixer_interrupt_v2(mixer, msg->bAttribute,
|
|
le16_to_cpu(msg->wValue),
|
|
le16_to_cpu(msg->wIndex));
|
|
}
|
|
}
|
|
|
|
requeue:
|
|
if (ustatus != -ENOENT &&
|
|
ustatus != -ECONNRESET &&
|
|
ustatus != -ESHUTDOWN) {
|
|
urb->dev = mixer->chip->dev;
|
|
usb_submit_urb(urb, GFP_ATOMIC);
|
|
}
|
|
}
|
|
|
|
/* create the handler for the optional status interrupt endpoint */
|
|
static int snd_usb_mixer_status_create(struct usb_mixer_interface *mixer)
|
|
{
|
|
struct usb_endpoint_descriptor *ep;
|
|
void *transfer_buffer;
|
|
int buffer_length;
|
|
unsigned int epnum;
|
|
|
|
/* we need one interrupt input endpoint */
|
|
if (get_iface_desc(mixer->hostif)->bNumEndpoints < 1)
|
|
return 0;
|
|
ep = get_endpoint(mixer->hostif, 0);
|
|
if (!usb_endpoint_dir_in(ep) || !usb_endpoint_xfer_int(ep))
|
|
return 0;
|
|
|
|
epnum = usb_endpoint_num(ep);
|
|
buffer_length = le16_to_cpu(ep->wMaxPacketSize);
|
|
transfer_buffer = kmalloc(buffer_length, GFP_KERNEL);
|
|
if (!transfer_buffer)
|
|
return -ENOMEM;
|
|
mixer->urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!mixer->urb) {
|
|
kfree(transfer_buffer);
|
|
return -ENOMEM;
|
|
}
|
|
usb_fill_int_urb(mixer->urb, mixer->chip->dev,
|
|
usb_rcvintpipe(mixer->chip->dev, epnum),
|
|
transfer_buffer, buffer_length,
|
|
snd_usb_mixer_interrupt, mixer, ep->bInterval);
|
|
usb_submit_urb(mixer->urb, GFP_KERNEL);
|
|
return 0;
|
|
}
|
|
|
|
int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif,
|
|
int ignore_error)
|
|
{
|
|
static struct snd_device_ops dev_ops = {
|
|
.dev_free = snd_usb_mixer_dev_free
|
|
};
|
|
struct usb_mixer_interface *mixer;
|
|
struct snd_info_entry *entry;
|
|
int err;
|
|
|
|
strcpy(chip->card->mixername, "USB Mixer");
|
|
|
|
mixer = kzalloc(sizeof(*mixer), GFP_KERNEL);
|
|
if (!mixer)
|
|
return -ENOMEM;
|
|
mixer->chip = chip;
|
|
mixer->ignore_ctl_error = ignore_error;
|
|
mixer->id_elems = kcalloc(MAX_ID_ELEMS, sizeof(*mixer->id_elems),
|
|
GFP_KERNEL);
|
|
if (!mixer->id_elems) {
|
|
kfree(mixer);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mixer->hostif = &usb_ifnum_to_if(chip->dev, ctrlif)->altsetting[0];
|
|
switch (get_iface_desc(mixer->hostif)->bInterfaceProtocol) {
|
|
case UAC_VERSION_1:
|
|
default:
|
|
mixer->protocol = UAC_VERSION_1;
|
|
break;
|
|
case UAC_VERSION_2:
|
|
mixer->protocol = UAC_VERSION_2;
|
|
break;
|
|
}
|
|
|
|
if ((err = snd_usb_mixer_controls(mixer)) < 0 ||
|
|
(err = snd_usb_mixer_status_create(mixer)) < 0)
|
|
goto _error;
|
|
|
|
snd_usb_mixer_apply_create_quirk(mixer);
|
|
|
|
err = snd_device_new(chip->card, SNDRV_DEV_CODEC, mixer, &dev_ops);
|
|
if (err < 0)
|
|
goto _error;
|
|
|
|
if (list_empty(&chip->mixer_list) &&
|
|
!snd_card_proc_new(chip->card, "usbmixer", &entry))
|
|
snd_info_set_text_ops(entry, chip, snd_usb_mixer_proc_read);
|
|
|
|
list_add(&mixer->list, &chip->mixer_list);
|
|
return 0;
|
|
|
|
_error:
|
|
snd_usb_mixer_free(mixer);
|
|
return err;
|
|
}
|
|
|
|
void snd_usb_mixer_disconnect(struct usb_mixer_interface *mixer)
|
|
{
|
|
usb_kill_urb(mixer->urb);
|
|
usb_kill_urb(mixer->rc_urb);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
/* stop any bus activity of a mixer */
|
|
static void snd_usb_mixer_inactivate(struct usb_mixer_interface *mixer)
|
|
{
|
|
usb_kill_urb(mixer->urb);
|
|
usb_kill_urb(mixer->rc_urb);
|
|
}
|
|
|
|
static int snd_usb_mixer_activate(struct usb_mixer_interface *mixer)
|
|
{
|
|
int err;
|
|
|
|
if (mixer->urb) {
|
|
err = usb_submit_urb(mixer->urb, GFP_NOIO);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int snd_usb_mixer_suspend(struct usb_mixer_interface *mixer)
|
|
{
|
|
snd_usb_mixer_inactivate(mixer);
|
|
return 0;
|
|
}
|
|
|
|
static int restore_mixer_value(struct usb_mixer_elem_list *list)
|
|
{
|
|
struct usb_mixer_elem_info *cval = (struct usb_mixer_elem_info *)list;
|
|
int c, err, idx;
|
|
|
|
if (cval->cmask) {
|
|
idx = 0;
|
|
for (c = 0; c < MAX_CHANNELS; c++) {
|
|
if (!(cval->cmask & (1 << c)))
|
|
continue;
|
|
if (cval->cached & (1 << (c + 1))) {
|
|
err = snd_usb_set_cur_mix_value(cval, c + 1, idx,
|
|
cval->cache_val[idx]);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
idx++;
|
|
}
|
|
} else {
|
|
/* master */
|
|
if (cval->cached) {
|
|
err = snd_usb_set_cur_mix_value(cval, 0, 0, *cval->cache_val);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int snd_usb_mixer_resume(struct usb_mixer_interface *mixer, bool reset_resume)
|
|
{
|
|
struct usb_mixer_elem_list *list;
|
|
int id, err;
|
|
|
|
if (reset_resume) {
|
|
/* restore cached mixer values */
|
|
for (id = 0; id < MAX_ID_ELEMS; id++) {
|
|
for (list = mixer->id_elems[id]; list;
|
|
list = list->next_id_elem) {
|
|
if (list->resume) {
|
|
err = list->resume(list);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return snd_usb_mixer_activate(mixer);
|
|
}
|
|
#endif
|
|
|
|
void snd_usb_mixer_elem_init_std(struct usb_mixer_elem_list *list,
|
|
struct usb_mixer_interface *mixer,
|
|
int unitid)
|
|
{
|
|
list->mixer = mixer;
|
|
list->id = unitid;
|
|
list->dump = snd_usb_mixer_dump_cval;
|
|
#ifdef CONFIG_PM
|
|
list->resume = restore_mixer_value;
|
|
#endif
|
|
}
|