mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-18 06:50:08 +00:00
3553a2fa8c
Since there's no way to autodetect panel modes, we're forced to hardcode them in the driver and add a big fat #ifdef. The OLPC DCON needs a specific mode line (at 1200x900). This adds it to both gxfb and lxfb. (Jordan said: We could probably detect the panel mode, but there isn't any reason to since the panel timings are well known and won't change. While OFW detection would be good computer science fu, it would be a wasted effort since its so easy to hard code them into the table.) Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
547 lines
14 KiB
C
547 lines
14 KiB
C
/*
|
|
* Geode GX framebuffer driver.
|
|
*
|
|
* Copyright (C) 2006 Arcom Control Systems Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*
|
|
* This driver assumes that the BIOS has created a virtual PCI device header
|
|
* for the video device. The PCI header is assumed to contain the following
|
|
* BARs:
|
|
*
|
|
* BAR0 - framebuffer memory
|
|
* BAR1 - graphics processor registers
|
|
* BAR2 - display controller registers
|
|
* BAR3 - video processor and flat panel control registers.
|
|
*
|
|
* 16 MiB of framebuffer memory is assumed to be available.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/console.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <asm/geode.h>
|
|
|
|
#include "gxfb.h"
|
|
|
|
static char *mode_option;
|
|
static int vram;
|
|
static int vt_switch;
|
|
|
|
/* Modes relevant to the GX (taken from modedb.c) */
|
|
static struct fb_videomode gx_modedb[] __initdata = {
|
|
/* 640x480-60 VESA */
|
|
{ NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2,
|
|
0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 640x480-75 VESA */
|
|
{ NULL, 75, 640, 480, 31746, 120, 16, 16, 01, 64, 3,
|
|
0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 640x480-85 VESA */
|
|
{ NULL, 85, 640, 480, 27777, 80, 56, 25, 01, 56, 3,
|
|
0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 800x600-60 VESA */
|
|
{ NULL, 60, 800, 600, 25000, 88, 40, 23, 01, 128, 4,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 800x600-75 VESA */
|
|
{ NULL, 75, 800, 600, 20202, 160, 16, 21, 01, 80, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 800x600-85 VESA */
|
|
{ NULL, 85, 800, 600, 17761, 152, 32, 27, 01, 64, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 1024x768-60 VESA */
|
|
{ NULL, 60, 1024, 768, 15384, 160, 24, 29, 3, 136, 6,
|
|
0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 1024x768-75 VESA */
|
|
{ NULL, 75, 1024, 768, 12690, 176, 16, 28, 1, 96, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 1024x768-85 VESA */
|
|
{ NULL, 85, 1024, 768, 10582, 208, 48, 36, 1, 96, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 1280x960-60 VESA */
|
|
{ NULL, 60, 1280, 960, 9259, 312, 96, 36, 1, 112, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 1280x960-85 VESA */
|
|
{ NULL, 85, 1280, 960, 6734, 224, 64, 47, 1, 160, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 1280x1024-60 VESA */
|
|
{ NULL, 60, 1280, 1024, 9259, 248, 48, 38, 1, 112, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 1280x1024-75 VESA */
|
|
{ NULL, 75, 1280, 1024, 7407, 248, 16, 38, 1, 144, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 1280x1024-85 VESA */
|
|
{ NULL, 85, 1280, 1024, 6349, 224, 64, 44, 1, 160, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 1600x1200-60 VESA */
|
|
{ NULL, 60, 1600, 1200, 6172, 304, 64, 46, 1, 192, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 1600x1200-75 VESA */
|
|
{ NULL, 75, 1600, 1200, 4938, 304, 64, 46, 1, 192, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
/* 1600x1200-85 VESA */
|
|
{ NULL, 85, 1600, 1200, 4357, 304, 64, 46, 1, 192, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA },
|
|
};
|
|
|
|
#ifdef CONFIG_OLPC
|
|
#include <asm/olpc.h>
|
|
|
|
static struct fb_videomode gx_dcon_modedb[] __initdata = {
|
|
/* The only mode the DCON has is 1200x900 */
|
|
{ NULL, 50, 1200, 900, 17460, 24, 8, 4, 5, 8, 3,
|
|
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
FB_VMODE_NONINTERLACED, 0 }
|
|
};
|
|
|
|
static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
|
|
{
|
|
if (olpc_has_dcon()) {
|
|
*modedb = (struct fb_videomode *) gx_dcon_modedb;
|
|
*size = ARRAY_SIZE(gx_dcon_modedb);
|
|
} else {
|
|
*modedb = (struct fb_videomode *) gx_modedb;
|
|
*size = ARRAY_SIZE(gx_modedb);
|
|
}
|
|
}
|
|
|
|
#else
|
|
static void __init get_modedb(struct fb_videomode **modedb, unsigned int *size)
|
|
{
|
|
*modedb = (struct fb_videomode *) gx_modedb;
|
|
*size = ARRAY_SIZE(gx_modedb);
|
|
}
|
|
#endif
|
|
|
|
static int gxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
|
|
{
|
|
if (var->xres > 1600 || var->yres > 1200)
|
|
return -EINVAL;
|
|
if ((var->xres > 1280 || var->yres > 1024) && var->bits_per_pixel > 16)
|
|
return -EINVAL;
|
|
|
|
if (var->bits_per_pixel == 32) {
|
|
var->red.offset = 16; var->red.length = 8;
|
|
var->green.offset = 8; var->green.length = 8;
|
|
var->blue.offset = 0; var->blue.length = 8;
|
|
} else if (var->bits_per_pixel == 16) {
|
|
var->red.offset = 11; var->red.length = 5;
|
|
var->green.offset = 5; var->green.length = 6;
|
|
var->blue.offset = 0; var->blue.length = 5;
|
|
} else if (var->bits_per_pixel == 8) {
|
|
var->red.offset = 0; var->red.length = 8;
|
|
var->green.offset = 0; var->green.length = 8;
|
|
var->blue.offset = 0; var->blue.length = 8;
|
|
} else
|
|
return -EINVAL;
|
|
var->transp.offset = 0; var->transp.length = 0;
|
|
|
|
/* Enough video memory? */
|
|
if (gx_line_delta(var->xres, var->bits_per_pixel) * var->yres > info->fix.smem_len)
|
|
return -EINVAL;
|
|
|
|
/* FIXME: Check timing parameters here? */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gxfb_set_par(struct fb_info *info)
|
|
{
|
|
if (info->var.bits_per_pixel > 8) {
|
|
info->fix.visual = FB_VISUAL_TRUECOLOR;
|
|
fb_dealloc_cmap(&info->cmap);
|
|
} else {
|
|
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
|
fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0);
|
|
}
|
|
|
|
info->fix.line_length = gx_line_delta(info->var.xres, info->var.bits_per_pixel);
|
|
|
|
gx_set_mode(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
|
|
{
|
|
chan &= 0xffff;
|
|
chan >>= 16 - bf->length;
|
|
return chan << bf->offset;
|
|
}
|
|
|
|
static int gxfb_setcolreg(unsigned regno, unsigned red, unsigned green,
|
|
unsigned blue, unsigned transp,
|
|
struct fb_info *info)
|
|
{
|
|
if (info->var.grayscale) {
|
|
/* grayscale = 0.30*R + 0.59*G + 0.11*B */
|
|
red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
|
|
}
|
|
|
|
/* Truecolor has hardware independent palette */
|
|
if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
|
|
u32 *pal = info->pseudo_palette;
|
|
u32 v;
|
|
|
|
if (regno >= 16)
|
|
return -EINVAL;
|
|
|
|
v = chan_to_field(red, &info->var.red);
|
|
v |= chan_to_field(green, &info->var.green);
|
|
v |= chan_to_field(blue, &info->var.blue);
|
|
|
|
pal[regno] = v;
|
|
} else {
|
|
if (regno >= 256)
|
|
return -EINVAL;
|
|
|
|
gx_set_hw_palette_reg(info, regno, red, green, blue);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gxfb_blank(int blank_mode, struct fb_info *info)
|
|
{
|
|
return gx_blank_display(info, blank_mode);
|
|
}
|
|
|
|
static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
|
|
{
|
|
struct gxfb_par *par = info->par;
|
|
int ret;
|
|
|
|
ret = pci_enable_device(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = pci_request_region(dev, 3, "gxfb (video processor)");
|
|
if (ret < 0)
|
|
return ret;
|
|
par->vid_regs = ioremap(pci_resource_start(dev, 3),
|
|
pci_resource_len(dev, 3));
|
|
if (!par->vid_regs)
|
|
return -ENOMEM;
|
|
|
|
ret = pci_request_region(dev, 2, "gxfb (display controller)");
|
|
if (ret < 0)
|
|
return ret;
|
|
par->dc_regs = ioremap(pci_resource_start(dev, 2), pci_resource_len(dev, 2));
|
|
if (!par->dc_regs)
|
|
return -ENOMEM;
|
|
|
|
ret = pci_request_region(dev, 1, "gxfb (graphics processor)");
|
|
if (ret < 0)
|
|
return ret;
|
|
par->gp_regs = ioremap(pci_resource_start(dev, 1),
|
|
pci_resource_len(dev, 1));
|
|
|
|
if (!par->gp_regs)
|
|
return -ENOMEM;
|
|
|
|
ret = pci_request_region(dev, 0, "gxfb (framebuffer)");
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
info->fix.smem_start = pci_resource_start(dev, 0);
|
|
info->fix.smem_len = vram ? vram : gx_frame_buffer_size();
|
|
info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
|
|
if (!info->screen_base)
|
|
return -ENOMEM;
|
|
|
|
/* Set the 16MiB aligned base address of the graphics memory region
|
|
* in the display controller */
|
|
|
|
write_dc(par, DC_GLIU0_MEM_OFFSET, info->fix.smem_start & 0xFF000000);
|
|
|
|
dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n",
|
|
info->fix.smem_len / 1024, info->fix.smem_start);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct fb_ops gxfb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_check_var = gxfb_check_var,
|
|
.fb_set_par = gxfb_set_par,
|
|
.fb_setcolreg = gxfb_setcolreg,
|
|
.fb_blank = gxfb_blank,
|
|
/* No HW acceleration for now. */
|
|
.fb_fillrect = cfb_fillrect,
|
|
.fb_copyarea = cfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
};
|
|
|
|
static struct fb_info * __init gxfb_init_fbinfo(struct device *dev)
|
|
{
|
|
struct gxfb_par *par;
|
|
struct fb_info *info;
|
|
|
|
/* Alloc enough space for the pseudo palette. */
|
|
info = framebuffer_alloc(sizeof(struct gxfb_par) + sizeof(u32) * 16,
|
|
dev);
|
|
if (!info)
|
|
return NULL;
|
|
|
|
par = info->par;
|
|
|
|
strcpy(info->fix.id, "Geode GX");
|
|
|
|
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
|
info->fix.type_aux = 0;
|
|
info->fix.xpanstep = 0;
|
|
info->fix.ypanstep = 0;
|
|
info->fix.ywrapstep = 0;
|
|
info->fix.accel = FB_ACCEL_NONE;
|
|
|
|
info->var.nonstd = 0;
|
|
info->var.activate = FB_ACTIVATE_NOW;
|
|
info->var.height = -1;
|
|
info->var.width = -1;
|
|
info->var.accel_flags = 0;
|
|
info->var.vmode = FB_VMODE_NONINTERLACED;
|
|
|
|
info->fbops = &gxfb_ops;
|
|
info->flags = FBINFO_DEFAULT;
|
|
info->node = -1;
|
|
|
|
info->pseudo_palette = (void *)par + sizeof(struct gxfb_par);
|
|
|
|
info->var.grayscale = 0;
|
|
|
|
return info;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int gxfb_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(pdev);
|
|
|
|
if (state.event == PM_EVENT_SUSPEND) {
|
|
acquire_console_sem();
|
|
gx_powerdown(info);
|
|
fb_set_suspend(info, 1);
|
|
release_console_sem();
|
|
}
|
|
|
|
/* there's no point in setting PCI states; we emulate PCI, so
|
|
* we don't end up getting power savings anyways */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gxfb_resume(struct pci_dev *pdev)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
acquire_console_sem();
|
|
ret = gx_powerup(info);
|
|
if (ret) {
|
|
printk(KERN_ERR "gxfb: power up failed!\n");
|
|
return ret;
|
|
}
|
|
|
|
fb_set_suspend(info, 0);
|
|
release_console_sem();
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
struct gxfb_par *par;
|
|
struct fb_info *info;
|
|
int ret;
|
|
unsigned long val;
|
|
|
|
struct fb_videomode *modedb_ptr;
|
|
unsigned int modedb_size;
|
|
|
|
info = gxfb_init_fbinfo(&pdev->dev);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
par = info->par;
|
|
|
|
if ((ret = gxfb_map_video_memory(info, pdev)) < 0) {
|
|
dev_err(&pdev->dev, "failed to map frame buffer or controller registers\n");
|
|
goto err;
|
|
}
|
|
|
|
/* Figure out if this is a TFT or CRT part */
|
|
|
|
rdmsrl(MSR_GX_GLD_MSR_CONFIG, val);
|
|
|
|
if ((val & MSR_GX_GLD_MSR_CONFIG_FP) == MSR_GX_GLD_MSR_CONFIG_FP)
|
|
par->enable_crt = 0;
|
|
else
|
|
par->enable_crt = 1;
|
|
|
|
get_modedb(&modedb_ptr, &modedb_size);
|
|
ret = fb_find_mode(&info->var, info, mode_option,
|
|
modedb_ptr, modedb_size, NULL, 16);
|
|
if (ret == 0 || ret == 4) {
|
|
dev_err(&pdev->dev, "could not find valid video mode\n");
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
|
|
/* Clear the frame buffer of garbage. */
|
|
memset_io(info->screen_base, 0, info->fix.smem_len);
|
|
|
|
gxfb_check_var(&info->var, info);
|
|
gxfb_set_par(info);
|
|
|
|
pm_set_vt_switch(vt_switch);
|
|
|
|
if (register_framebuffer(info) < 0) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
pci_set_drvdata(pdev, info);
|
|
printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
|
|
return 0;
|
|
|
|
err:
|
|
if (info->screen_base) {
|
|
iounmap(info->screen_base);
|
|
pci_release_region(pdev, 0);
|
|
}
|
|
if (par->vid_regs) {
|
|
iounmap(par->vid_regs);
|
|
pci_release_region(pdev, 3);
|
|
}
|
|
if (par->dc_regs) {
|
|
iounmap(par->dc_regs);
|
|
pci_release_region(pdev, 2);
|
|
}
|
|
if (par->gp_regs) {
|
|
iounmap(par->gp_regs);
|
|
pci_release_region(pdev, 1);
|
|
}
|
|
|
|
if (info)
|
|
framebuffer_release(info);
|
|
return ret;
|
|
}
|
|
|
|
static void gxfb_remove(struct pci_dev *pdev)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(pdev);
|
|
struct gxfb_par *par = info->par;
|
|
|
|
unregister_framebuffer(info);
|
|
|
|
iounmap((void __iomem *)info->screen_base);
|
|
pci_release_region(pdev, 0);
|
|
|
|
iounmap(par->vid_regs);
|
|
pci_release_region(pdev, 3);
|
|
|
|
iounmap(par->dc_regs);
|
|
pci_release_region(pdev, 2);
|
|
|
|
iounmap(par->gp_regs);
|
|
pci_release_region(pdev, 1);
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
|
|
framebuffer_release(info);
|
|
}
|
|
|
|
static struct pci_device_id gxfb_id_table[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_GX_VIDEO) },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, gxfb_id_table);
|
|
|
|
static struct pci_driver gxfb_driver = {
|
|
.name = "gxfb",
|
|
.id_table = gxfb_id_table,
|
|
.probe = gxfb_probe,
|
|
.remove = gxfb_remove,
|
|
#ifdef CONFIG_PM
|
|
.suspend = gxfb_suspend,
|
|
.resume = gxfb_resume,
|
|
#endif
|
|
};
|
|
|
|
#ifndef MODULE
|
|
static int __init gxfb_setup(char *options)
|
|
{
|
|
|
|
char *opt;
|
|
|
|
if (!options || !*options)
|
|
return 0;
|
|
|
|
while ((opt = strsep(&options, ",")) != NULL) {
|
|
if (!*opt)
|
|
continue;
|
|
|
|
mode_option = opt;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int __init gxfb_init(void)
|
|
{
|
|
#ifndef MODULE
|
|
char *option = NULL;
|
|
|
|
if (fb_get_options("gxfb", &option))
|
|
return -ENODEV;
|
|
|
|
gxfb_setup(option);
|
|
#endif
|
|
return pci_register_driver(&gxfb_driver);
|
|
}
|
|
|
|
static void __exit gxfb_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&gxfb_driver);
|
|
}
|
|
|
|
module_init(gxfb_init);
|
|
module_exit(gxfb_cleanup);
|
|
|
|
module_param(mode_option, charp, 0);
|
|
MODULE_PARM_DESC(mode_option, "video mode (<x>x<y>[-<bpp>][@<refr>])");
|
|
|
|
module_param(vram, int, 0);
|
|
MODULE_PARM_DESC(vram, "video memory size");
|
|
|
|
module_param(vt_switch, int, 0);
|
|
MODULE_PARM_DESC(vt_switch, "enable VT switch during suspend/resume");
|
|
|
|
MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
|
|
MODULE_LICENSE("GPL");
|