mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-27 20:07:09 +00:00
6ba48ff46f
The current x86 instruction decoder steps along through the instruction stream but always ensures that it never steps farther than the largest possible instruction size (MAX_INSN_SIZE). The MPX code is now going to be doing some decoding of userspace instructions. We copy those from userspace in to the kernel and they're obviously completely untrusted coming from userspace. In addition to the constraint that instructions can only be so long, we also have to be aware of how long the buffer is that came in from userspace. This _looks_ to be similar to what the perf and kprobes is doing, but it's unclear to me whether they are affected. The whole reason we need this is that it is perfectly valid to be executing an instruction within MAX_INSN_SIZE bytes of an unreadable page. We should be able to gracefully handle short reads in those cases. This adds support to the decoder to record how long the buffer being decoded is and to refuse to "validate" the instruction if we would have gone over the end of the buffer to decode it. The kprobes code probably needs to be looked at here a bit more carefully. This patch still respects the MAX_INSN_SIZE limit there but the kprobes code does look like it might be able to be a bit more strict than it currently is. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: x86@kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20141114153957.E6B01535@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
582 lines
14 KiB
C
582 lines
14 KiB
C
/*
|
|
* x86 instruction analysis
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*
|
|
* Copyright (C) IBM Corporation, 2002, 2004, 2009
|
|
*/
|
|
|
|
#ifdef __KERNEL__
|
|
#include <linux/string.h>
|
|
#else
|
|
#include <string.h>
|
|
#endif
|
|
#include <asm/inat.h>
|
|
#include <asm/insn.h>
|
|
|
|
/* Verify next sizeof(t) bytes can be on the same instruction */
|
|
#define validate_next(t, insn, n) \
|
|
((insn)->next_byte + sizeof(t) + n < (insn)->end_kaddr)
|
|
|
|
#define __get_next(t, insn) \
|
|
({ t r = *(t*)insn->next_byte; insn->next_byte += sizeof(t); r; })
|
|
|
|
#define __peek_nbyte_next(t, insn, n) \
|
|
({ t r = *(t*)((insn)->next_byte + n); r; })
|
|
|
|
#define get_next(t, insn) \
|
|
({ if (unlikely(!validate_next(t, insn, 0))) goto err_out; __get_next(t, insn); })
|
|
|
|
#define peek_nbyte_next(t, insn, n) \
|
|
({ if (unlikely(!validate_next(t, insn, n))) goto err_out; __peek_nbyte_next(t, insn, n); })
|
|
|
|
#define peek_next(t, insn) peek_nbyte_next(t, insn, 0)
|
|
|
|
/**
|
|
* insn_init() - initialize struct insn
|
|
* @insn: &struct insn to be initialized
|
|
* @kaddr: address (in kernel memory) of instruction (or copy thereof)
|
|
* @x86_64: !0 for 64-bit kernel or 64-bit app
|
|
*/
|
|
void insn_init(struct insn *insn, const void *kaddr, int buf_len, int x86_64)
|
|
{
|
|
memset(insn, 0, sizeof(*insn));
|
|
insn->kaddr = kaddr;
|
|
insn->end_kaddr = kaddr + buf_len;
|
|
insn->next_byte = kaddr;
|
|
insn->x86_64 = x86_64 ? 1 : 0;
|
|
insn->opnd_bytes = 4;
|
|
if (x86_64)
|
|
insn->addr_bytes = 8;
|
|
else
|
|
insn->addr_bytes = 4;
|
|
}
|
|
|
|
/**
|
|
* insn_get_prefixes - scan x86 instruction prefix bytes
|
|
* @insn: &struct insn containing instruction
|
|
*
|
|
* Populates the @insn->prefixes bitmap, and updates @insn->next_byte
|
|
* to point to the (first) opcode. No effect if @insn->prefixes.got
|
|
* is already set.
|
|
*/
|
|
void insn_get_prefixes(struct insn *insn)
|
|
{
|
|
struct insn_field *prefixes = &insn->prefixes;
|
|
insn_attr_t attr;
|
|
insn_byte_t b, lb;
|
|
int i, nb;
|
|
|
|
if (prefixes->got)
|
|
return;
|
|
|
|
nb = 0;
|
|
lb = 0;
|
|
b = peek_next(insn_byte_t, insn);
|
|
attr = inat_get_opcode_attribute(b);
|
|
while (inat_is_legacy_prefix(attr)) {
|
|
/* Skip if same prefix */
|
|
for (i = 0; i < nb; i++)
|
|
if (prefixes->bytes[i] == b)
|
|
goto found;
|
|
if (nb == 4)
|
|
/* Invalid instruction */
|
|
break;
|
|
prefixes->bytes[nb++] = b;
|
|
if (inat_is_address_size_prefix(attr)) {
|
|
/* address size switches 2/4 or 4/8 */
|
|
if (insn->x86_64)
|
|
insn->addr_bytes ^= 12;
|
|
else
|
|
insn->addr_bytes ^= 6;
|
|
} else if (inat_is_operand_size_prefix(attr)) {
|
|
/* oprand size switches 2/4 */
|
|
insn->opnd_bytes ^= 6;
|
|
}
|
|
found:
|
|
prefixes->nbytes++;
|
|
insn->next_byte++;
|
|
lb = b;
|
|
b = peek_next(insn_byte_t, insn);
|
|
attr = inat_get_opcode_attribute(b);
|
|
}
|
|
/* Set the last prefix */
|
|
if (lb && lb != insn->prefixes.bytes[3]) {
|
|
if (unlikely(insn->prefixes.bytes[3])) {
|
|
/* Swap the last prefix */
|
|
b = insn->prefixes.bytes[3];
|
|
for (i = 0; i < nb; i++)
|
|
if (prefixes->bytes[i] == lb)
|
|
prefixes->bytes[i] = b;
|
|
}
|
|
insn->prefixes.bytes[3] = lb;
|
|
}
|
|
|
|
/* Decode REX prefix */
|
|
if (insn->x86_64) {
|
|
b = peek_next(insn_byte_t, insn);
|
|
attr = inat_get_opcode_attribute(b);
|
|
if (inat_is_rex_prefix(attr)) {
|
|
insn->rex_prefix.value = b;
|
|
insn->rex_prefix.nbytes = 1;
|
|
insn->next_byte++;
|
|
if (X86_REX_W(b))
|
|
/* REX.W overrides opnd_size */
|
|
insn->opnd_bytes = 8;
|
|
}
|
|
}
|
|
insn->rex_prefix.got = 1;
|
|
|
|
/* Decode VEX prefix */
|
|
b = peek_next(insn_byte_t, insn);
|
|
attr = inat_get_opcode_attribute(b);
|
|
if (inat_is_vex_prefix(attr)) {
|
|
insn_byte_t b2 = peek_nbyte_next(insn_byte_t, insn, 1);
|
|
if (!insn->x86_64) {
|
|
/*
|
|
* In 32-bits mode, if the [7:6] bits (mod bits of
|
|
* ModRM) on the second byte are not 11b, it is
|
|
* LDS or LES.
|
|
*/
|
|
if (X86_MODRM_MOD(b2) != 3)
|
|
goto vex_end;
|
|
}
|
|
insn->vex_prefix.bytes[0] = b;
|
|
insn->vex_prefix.bytes[1] = b2;
|
|
if (inat_is_vex3_prefix(attr)) {
|
|
b2 = peek_nbyte_next(insn_byte_t, insn, 2);
|
|
insn->vex_prefix.bytes[2] = b2;
|
|
insn->vex_prefix.nbytes = 3;
|
|
insn->next_byte += 3;
|
|
if (insn->x86_64 && X86_VEX_W(b2))
|
|
/* VEX.W overrides opnd_size */
|
|
insn->opnd_bytes = 8;
|
|
} else {
|
|
insn->vex_prefix.nbytes = 2;
|
|
insn->next_byte += 2;
|
|
}
|
|
}
|
|
vex_end:
|
|
insn->vex_prefix.got = 1;
|
|
|
|
prefixes->got = 1;
|
|
|
|
err_out:
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* insn_get_opcode - collect opcode(s)
|
|
* @insn: &struct insn containing instruction
|
|
*
|
|
* Populates @insn->opcode, updates @insn->next_byte to point past the
|
|
* opcode byte(s), and set @insn->attr (except for groups).
|
|
* If necessary, first collects any preceding (prefix) bytes.
|
|
* Sets @insn->opcode.value = opcode1. No effect if @insn->opcode.got
|
|
* is already 1.
|
|
*/
|
|
void insn_get_opcode(struct insn *insn)
|
|
{
|
|
struct insn_field *opcode = &insn->opcode;
|
|
insn_byte_t op;
|
|
int pfx_id;
|
|
if (opcode->got)
|
|
return;
|
|
if (!insn->prefixes.got)
|
|
insn_get_prefixes(insn);
|
|
|
|
/* Get first opcode */
|
|
op = get_next(insn_byte_t, insn);
|
|
opcode->bytes[0] = op;
|
|
opcode->nbytes = 1;
|
|
|
|
/* Check if there is VEX prefix or not */
|
|
if (insn_is_avx(insn)) {
|
|
insn_byte_t m, p;
|
|
m = insn_vex_m_bits(insn);
|
|
p = insn_vex_p_bits(insn);
|
|
insn->attr = inat_get_avx_attribute(op, m, p);
|
|
if (!inat_accept_vex(insn->attr) && !inat_is_group(insn->attr))
|
|
insn->attr = 0; /* This instruction is bad */
|
|
goto end; /* VEX has only 1 byte for opcode */
|
|
}
|
|
|
|
insn->attr = inat_get_opcode_attribute(op);
|
|
while (inat_is_escape(insn->attr)) {
|
|
/* Get escaped opcode */
|
|
op = get_next(insn_byte_t, insn);
|
|
opcode->bytes[opcode->nbytes++] = op;
|
|
pfx_id = insn_last_prefix_id(insn);
|
|
insn->attr = inat_get_escape_attribute(op, pfx_id, insn->attr);
|
|
}
|
|
if (inat_must_vex(insn->attr))
|
|
insn->attr = 0; /* This instruction is bad */
|
|
end:
|
|
opcode->got = 1;
|
|
|
|
err_out:
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* insn_get_modrm - collect ModRM byte, if any
|
|
* @insn: &struct insn containing instruction
|
|
*
|
|
* Populates @insn->modrm and updates @insn->next_byte to point past the
|
|
* ModRM byte, if any. If necessary, first collects the preceding bytes
|
|
* (prefixes and opcode(s)). No effect if @insn->modrm.got is already 1.
|
|
*/
|
|
void insn_get_modrm(struct insn *insn)
|
|
{
|
|
struct insn_field *modrm = &insn->modrm;
|
|
insn_byte_t pfx_id, mod;
|
|
if (modrm->got)
|
|
return;
|
|
if (!insn->opcode.got)
|
|
insn_get_opcode(insn);
|
|
|
|
if (inat_has_modrm(insn->attr)) {
|
|
mod = get_next(insn_byte_t, insn);
|
|
modrm->value = mod;
|
|
modrm->nbytes = 1;
|
|
if (inat_is_group(insn->attr)) {
|
|
pfx_id = insn_last_prefix_id(insn);
|
|
insn->attr = inat_get_group_attribute(mod, pfx_id,
|
|
insn->attr);
|
|
if (insn_is_avx(insn) && !inat_accept_vex(insn->attr))
|
|
insn->attr = 0; /* This is bad */
|
|
}
|
|
}
|
|
|
|
if (insn->x86_64 && inat_is_force64(insn->attr))
|
|
insn->opnd_bytes = 8;
|
|
modrm->got = 1;
|
|
|
|
err_out:
|
|
return;
|
|
}
|
|
|
|
|
|
/**
|
|
* insn_rip_relative() - Does instruction use RIP-relative addressing mode?
|
|
* @insn: &struct insn containing instruction
|
|
*
|
|
* If necessary, first collects the instruction up to and including the
|
|
* ModRM byte. No effect if @insn->x86_64 is 0.
|
|
*/
|
|
int insn_rip_relative(struct insn *insn)
|
|
{
|
|
struct insn_field *modrm = &insn->modrm;
|
|
|
|
if (!insn->x86_64)
|
|
return 0;
|
|
if (!modrm->got)
|
|
insn_get_modrm(insn);
|
|
/*
|
|
* For rip-relative instructions, the mod field (top 2 bits)
|
|
* is zero and the r/m field (bottom 3 bits) is 0x5.
|
|
*/
|
|
return (modrm->nbytes && (modrm->value & 0xc7) == 0x5);
|
|
}
|
|
|
|
/**
|
|
* insn_get_sib() - Get the SIB byte of instruction
|
|
* @insn: &struct insn containing instruction
|
|
*
|
|
* If necessary, first collects the instruction up to and including the
|
|
* ModRM byte.
|
|
*/
|
|
void insn_get_sib(struct insn *insn)
|
|
{
|
|
insn_byte_t modrm;
|
|
|
|
if (insn->sib.got)
|
|
return;
|
|
if (!insn->modrm.got)
|
|
insn_get_modrm(insn);
|
|
if (insn->modrm.nbytes) {
|
|
modrm = (insn_byte_t)insn->modrm.value;
|
|
if (insn->addr_bytes != 2 &&
|
|
X86_MODRM_MOD(modrm) != 3 && X86_MODRM_RM(modrm) == 4) {
|
|
insn->sib.value = get_next(insn_byte_t, insn);
|
|
insn->sib.nbytes = 1;
|
|
}
|
|
}
|
|
insn->sib.got = 1;
|
|
|
|
err_out:
|
|
return;
|
|
}
|
|
|
|
|
|
/**
|
|
* insn_get_displacement() - Get the displacement of instruction
|
|
* @insn: &struct insn containing instruction
|
|
*
|
|
* If necessary, first collects the instruction up to and including the
|
|
* SIB byte.
|
|
* Displacement value is sign-expanded.
|
|
*/
|
|
void insn_get_displacement(struct insn *insn)
|
|
{
|
|
insn_byte_t mod, rm, base;
|
|
|
|
if (insn->displacement.got)
|
|
return;
|
|
if (!insn->sib.got)
|
|
insn_get_sib(insn);
|
|
if (insn->modrm.nbytes) {
|
|
/*
|
|
* Interpreting the modrm byte:
|
|
* mod = 00 - no displacement fields (exceptions below)
|
|
* mod = 01 - 1-byte displacement field
|
|
* mod = 10 - displacement field is 4 bytes, or 2 bytes if
|
|
* address size = 2 (0x67 prefix in 32-bit mode)
|
|
* mod = 11 - no memory operand
|
|
*
|
|
* If address size = 2...
|
|
* mod = 00, r/m = 110 - displacement field is 2 bytes
|
|
*
|
|
* If address size != 2...
|
|
* mod != 11, r/m = 100 - SIB byte exists
|
|
* mod = 00, SIB base = 101 - displacement field is 4 bytes
|
|
* mod = 00, r/m = 101 - rip-relative addressing, displacement
|
|
* field is 4 bytes
|
|
*/
|
|
mod = X86_MODRM_MOD(insn->modrm.value);
|
|
rm = X86_MODRM_RM(insn->modrm.value);
|
|
base = X86_SIB_BASE(insn->sib.value);
|
|
if (mod == 3)
|
|
goto out;
|
|
if (mod == 1) {
|
|
insn->displacement.value = get_next(char, insn);
|
|
insn->displacement.nbytes = 1;
|
|
} else if (insn->addr_bytes == 2) {
|
|
if ((mod == 0 && rm == 6) || mod == 2) {
|
|
insn->displacement.value =
|
|
get_next(short, insn);
|
|
insn->displacement.nbytes = 2;
|
|
}
|
|
} else {
|
|
if ((mod == 0 && rm == 5) || mod == 2 ||
|
|
(mod == 0 && base == 5)) {
|
|
insn->displacement.value = get_next(int, insn);
|
|
insn->displacement.nbytes = 4;
|
|
}
|
|
}
|
|
}
|
|
out:
|
|
insn->displacement.got = 1;
|
|
|
|
err_out:
|
|
return;
|
|
}
|
|
|
|
/* Decode moffset16/32/64. Return 0 if failed */
|
|
static int __get_moffset(struct insn *insn)
|
|
{
|
|
switch (insn->addr_bytes) {
|
|
case 2:
|
|
insn->moffset1.value = get_next(short, insn);
|
|
insn->moffset1.nbytes = 2;
|
|
break;
|
|
case 4:
|
|
insn->moffset1.value = get_next(int, insn);
|
|
insn->moffset1.nbytes = 4;
|
|
break;
|
|
case 8:
|
|
insn->moffset1.value = get_next(int, insn);
|
|
insn->moffset1.nbytes = 4;
|
|
insn->moffset2.value = get_next(int, insn);
|
|
insn->moffset2.nbytes = 4;
|
|
break;
|
|
default: /* opnd_bytes must be modified manually */
|
|
goto err_out;
|
|
}
|
|
insn->moffset1.got = insn->moffset2.got = 1;
|
|
|
|
return 1;
|
|
|
|
err_out:
|
|
return 0;
|
|
}
|
|
|
|
/* Decode imm v32(Iz). Return 0 if failed */
|
|
static int __get_immv32(struct insn *insn)
|
|
{
|
|
switch (insn->opnd_bytes) {
|
|
case 2:
|
|
insn->immediate.value = get_next(short, insn);
|
|
insn->immediate.nbytes = 2;
|
|
break;
|
|
case 4:
|
|
case 8:
|
|
insn->immediate.value = get_next(int, insn);
|
|
insn->immediate.nbytes = 4;
|
|
break;
|
|
default: /* opnd_bytes must be modified manually */
|
|
goto err_out;
|
|
}
|
|
|
|
return 1;
|
|
|
|
err_out:
|
|
return 0;
|
|
}
|
|
|
|
/* Decode imm v64(Iv/Ov), Return 0 if failed */
|
|
static int __get_immv(struct insn *insn)
|
|
{
|
|
switch (insn->opnd_bytes) {
|
|
case 2:
|
|
insn->immediate1.value = get_next(short, insn);
|
|
insn->immediate1.nbytes = 2;
|
|
break;
|
|
case 4:
|
|
insn->immediate1.value = get_next(int, insn);
|
|
insn->immediate1.nbytes = 4;
|
|
break;
|
|
case 8:
|
|
insn->immediate1.value = get_next(int, insn);
|
|
insn->immediate1.nbytes = 4;
|
|
insn->immediate2.value = get_next(int, insn);
|
|
insn->immediate2.nbytes = 4;
|
|
break;
|
|
default: /* opnd_bytes must be modified manually */
|
|
goto err_out;
|
|
}
|
|
insn->immediate1.got = insn->immediate2.got = 1;
|
|
|
|
return 1;
|
|
err_out:
|
|
return 0;
|
|
}
|
|
|
|
/* Decode ptr16:16/32(Ap) */
|
|
static int __get_immptr(struct insn *insn)
|
|
{
|
|
switch (insn->opnd_bytes) {
|
|
case 2:
|
|
insn->immediate1.value = get_next(short, insn);
|
|
insn->immediate1.nbytes = 2;
|
|
break;
|
|
case 4:
|
|
insn->immediate1.value = get_next(int, insn);
|
|
insn->immediate1.nbytes = 4;
|
|
break;
|
|
case 8:
|
|
/* ptr16:64 is not exist (no segment) */
|
|
return 0;
|
|
default: /* opnd_bytes must be modified manually */
|
|
goto err_out;
|
|
}
|
|
insn->immediate2.value = get_next(unsigned short, insn);
|
|
insn->immediate2.nbytes = 2;
|
|
insn->immediate1.got = insn->immediate2.got = 1;
|
|
|
|
return 1;
|
|
err_out:
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* insn_get_immediate() - Get the immediates of instruction
|
|
* @insn: &struct insn containing instruction
|
|
*
|
|
* If necessary, first collects the instruction up to and including the
|
|
* displacement bytes.
|
|
* Basically, most of immediates are sign-expanded. Unsigned-value can be
|
|
* get by bit masking with ((1 << (nbytes * 8)) - 1)
|
|
*/
|
|
void insn_get_immediate(struct insn *insn)
|
|
{
|
|
if (insn->immediate.got)
|
|
return;
|
|
if (!insn->displacement.got)
|
|
insn_get_displacement(insn);
|
|
|
|
if (inat_has_moffset(insn->attr)) {
|
|
if (!__get_moffset(insn))
|
|
goto err_out;
|
|
goto done;
|
|
}
|
|
|
|
if (!inat_has_immediate(insn->attr))
|
|
/* no immediates */
|
|
goto done;
|
|
|
|
switch (inat_immediate_size(insn->attr)) {
|
|
case INAT_IMM_BYTE:
|
|
insn->immediate.value = get_next(char, insn);
|
|
insn->immediate.nbytes = 1;
|
|
break;
|
|
case INAT_IMM_WORD:
|
|
insn->immediate.value = get_next(short, insn);
|
|
insn->immediate.nbytes = 2;
|
|
break;
|
|
case INAT_IMM_DWORD:
|
|
insn->immediate.value = get_next(int, insn);
|
|
insn->immediate.nbytes = 4;
|
|
break;
|
|
case INAT_IMM_QWORD:
|
|
insn->immediate1.value = get_next(int, insn);
|
|
insn->immediate1.nbytes = 4;
|
|
insn->immediate2.value = get_next(int, insn);
|
|
insn->immediate2.nbytes = 4;
|
|
break;
|
|
case INAT_IMM_PTR:
|
|
if (!__get_immptr(insn))
|
|
goto err_out;
|
|
break;
|
|
case INAT_IMM_VWORD32:
|
|
if (!__get_immv32(insn))
|
|
goto err_out;
|
|
break;
|
|
case INAT_IMM_VWORD:
|
|
if (!__get_immv(insn))
|
|
goto err_out;
|
|
break;
|
|
default:
|
|
/* Here, insn must have an immediate, but failed */
|
|
goto err_out;
|
|
}
|
|
if (inat_has_second_immediate(insn->attr)) {
|
|
insn->immediate2.value = get_next(char, insn);
|
|
insn->immediate2.nbytes = 1;
|
|
}
|
|
done:
|
|
insn->immediate.got = 1;
|
|
|
|
err_out:
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* insn_get_length() - Get the length of instruction
|
|
* @insn: &struct insn containing instruction
|
|
*
|
|
* If necessary, first collects the instruction up to and including the
|
|
* immediates bytes.
|
|
*/
|
|
void insn_get_length(struct insn *insn)
|
|
{
|
|
if (insn->length)
|
|
return;
|
|
if (!insn->immediate.got)
|
|
insn_get_immediate(insn);
|
|
insn->length = (unsigned char)((unsigned long)insn->next_byte
|
|
- (unsigned long)insn->kaddr);
|
|
}
|