linux/arch/sparc/lib
David S. Miller b2d4383480 sparc64: Make PAGE_OFFSET variable.
Choose PAGE_OFFSET dynamically based upon cpu type.

Original UltraSPARC-I (spitfire) chips only supported a 44-bit
virtual address space.

Newer chips (T4 and later) support 52-bit virtual addresses
and up to 47-bits of physical memory space.

Therefore we have to adjust PAGE_SIZE dynamically based upon
the capabilities of the chip.

Note that this change alone does not allow us to support > 43-bit
physical memory, to do that we need to re-arrange our page table
support.  The current encodings of the pmd_t and pgd_t pointers
restricts us to "32 + 11" == 43 bits.

This change can waste quite a bit of memory for the various tables.
In particular, a future change should work to size and allocate
kern_linear_bitmap[] and sparc64_valid_addr_bitmap[] dynamically.
This isn't easy as we really cannot take a TLB miss when accessing
kern_linear_bitmap[].  We'd have to lock it into the TLB or similar.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Bob Picco <bob.picco@oracle.com>
2013-11-12 15:22:34 -08:00
..
ashldi3.S sparc: Convert some assembler over to linakge.h's ENTRY/ENDPROC 2012-05-11 20:33:22 -07:00
ashrdi3.S sparc: Convert some assembler over to linakge.h's ENTRY/ENDPROC 2012-05-11 20:33:22 -07:00
atomic32.c
atomic_64.S sparc: Support atomic64_dec_if_positive properly. 2012-11-09 19:37:59 -08:00
bitext.c sparc/srmmu: clear trailing edge of bitmap properly 2013-03-31 19:29:12 -04:00
bitops.S sparc: Convert some assembler over to linakge.h's ENTRY/ENDPROC 2012-05-11 20:33:22 -07:00
blockops.S sparc: Convert some assembler over to linakge.h's ENTRY/ENDPROC 2012-05-11 20:33:22 -07:00
bzero.S sparc: Convert some assembler over to linakge.h's ENTRY/ENDPROC 2012-05-11 20:33:22 -07:00
checksum_32.S
checksum_64.S
clear_page.S sparc64: Make PAGE_OFFSET variable. 2013-11-12 15:22:34 -08:00
cmpdi2.c
copy_in_user.S
copy_page.S sparc64: Make PAGE_OFFSET variable. 2013-11-12 15:22:34 -08:00
copy_user.S
COPYING.LIB
csum_copy_from_user.S
csum_copy_to_user.S
csum_copy.S
divdi3.S sparc32: Kill off software 32-bit multiply/divide routines. 2012-05-15 11:23:47 -07:00
ffs.S
GENbzero.S
GENcopy_from_user.S
GENcopy_to_user.S
GENmemcpy.S
GENpage.S
GENpatch.S
hweight.S
iomap.c
ipcsum.S sparc: Convert some assembler over to linakge.h's ENTRY/ENDPROC 2012-05-11 20:33:22 -07:00
ksyms.c sparc64: Remove RWSEM export leftovers 2013-09-05 12:12:51 -07:00
libgcc.h
locks.S
lshrdi3.S sparc: Convert some assembler over to linakge.h's ENTRY/ENDPROC 2012-05-11 20:33:22 -07:00
Makefile Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS 2013-04-30 17:04:09 -07:00
mcount.S
memcmp.S
memcpy.S
memmove.S sparc: Convert some assembler over to linakge.h's ENTRY/ENDPROC 2012-05-11 20:33:22 -07:00
memscan_32.S
memscan_64.S
memset.S
muldi3.S sparc32: Kill off software 32-bit multiply/divide routines. 2012-05-15 11:23:47 -07:00
NG2copy_from_user.S
NG2copy_to_user.S
NG2memcpy.S sparc64: Fix return value of Niagara-2 memcpy. 2012-09-27 01:06:43 -07:00
NG2patch.S
NG4clear_page.S sparc64: Niagara-4 bzero/memset, plus use MRU stores in page copy. 2012-10-05 13:45:26 -07:00
NG4copy_from_user.S sparc64: Fix comment type in NG4 copy from user. 2012-09-27 14:26:41 -07:00
NG4copy_page.S sparc64: Niagara-4 bzero/memset, plus use MRU stores in page copy. 2012-10-05 13:45:26 -07:00
NG4copy_to_user.S sparc64: Add SPARC-T4 optimized memcpy. 2012-09-27 00:35:11 -07:00
NG4memcpy.S sparc64: Fix trailing whitespace in NG4 memcpy. 2012-09-28 13:08:22 -07:00
NG4memset.S sparc64: Niagara-4 bzero/memset, plus use MRU stores in page copy. 2012-10-05 13:45:26 -07:00
NG4patch.S sparc64: Niagara-4 bzero/memset, plus use MRU stores in page copy. 2012-10-05 13:45:26 -07:00
NGbzero.S
NGcopy_from_user.S
NGcopy_to_user.S
NGmemcpy.S
NGpage.S sparc64: Add SPARC-T4 optimized memcpy. 2012-09-27 00:35:11 -07:00
NGpatch.S
PeeCeeI.c
strlen.S
strncmp_32.S sparc: Convert some assembler over to linakge.h's ENTRY/ENDPROC 2012-05-11 20:33:22 -07:00
strncmp_64.S sparc: Convert some assembler over to linakge.h's ENTRY/ENDPROC 2012-05-11 20:33:22 -07:00
U1copy_from_user.S
U1copy_to_user.S
U1memcpy.S sparc64: Consistently use fsrc2 rather than fmovd in optimized asm. 2012-06-27 01:25:23 -07:00
U3copy_from_user.S
U3copy_to_user.S
U3memcpy.S
U3patch.S
ucmpdi2.c sparc32: add ucmpdi2 2012-05-19 15:23:57 -07:00
udivdi3.S sparc32: Kill off software 32-bit multiply/divide routines. 2012-05-15 11:23:47 -07:00
user_fixup.c
VISsave.S
xor.S sparc: Convert some assembler over to linakge.h's ENTRY/ENDPROC 2012-05-11 20:33:22 -07:00