Bruce Allan 818f33313c e1000e: do not initiate autonegotiation during OEM configuration ... When configuring the OEM bits in the PHY on 82577/82578, do not restart autonegotiation if the firmware is blocking it (e.g. when an IDE-R session is active) because the link must not go down. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2009-11-20 13:53:32 -08:00
..
82571.c	e1000e: swap max hw supported frame size between 82574 and 82583	2009-10-04 21:08:49 -07:00
defines.h	e1000e: rework disable K1 at 1000Mbps for 82577/82578	2009-10-29 22:48:39 -07:00
e1000.h	e1000e: partial revert of 3ec2a2b8 plus FC workraround for 82577/8	2009-11-20 13:53:20 -08:00
es2lan.c
ethtool.c	e1000e: set flow control thresholds properly after enabling/disabling pause	2009-11-20 13:53:24 -08:00
hw.h	e1000e: rework disable K1 at 1000Mbps for 82577/82578	2009-10-29 22:48:39 -07:00
ich8lan.c	e1000e: do not initiate autonegotiation during OEM configuration	2009-11-20 13:53:32 -08:00
lib.c
Makefile
netdev.c	e1000e: flow control thresholds not correct when changing mtu	2009-11-20 13:53:27 -08:00
param.c
phy.c	e1000e: remove unnecessary 82577 workaround causing link issues	2009-11-20 13:53:29 -08:00