mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-29 13:00:35 +00:00
687da13223
When the driver requests to move to STATIC or DYNAMIC SMPS, we send an action frame to each associated station and reconfigure the channel context / driver. Of course, non-MIMO stations are ignored. The beacon isn't updated. The association response will include the original capabilities. Stations that associate while in non-OFF SMPS mode will get an action frame right after association to inform them about our current state. Note that we wait until the end of the EAPOL. Sending an action frame before the EAPOL is finished can be an issue for a few clients. Clients aren't likely to send EAPOL frames in MIMO anyway. When the SMPS configuration gets more permissive (e.g. STATIC -> OFF), we don't wake up stations that are asleep We remember that they don't know about the change and send the action frame when they wake up. When the SMPS configuration gets more restrictive (e.g. OFF -> STATIC), we set the TIM bit for every sleeping STA. uAPSD stations might send MIMO until they poll the action frame, but this is for a short period of time. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [fix vht streams loop, initialisation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
504 lines
15 KiB
C
504 lines
15 KiB
C
/*
|
|
* HT handling
|
|
*
|
|
* Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
|
|
* Copyright 2002-2005, Instant802 Networks, Inc.
|
|
* Copyright 2005-2006, Devicescape Software, Inc.
|
|
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
|
|
* Copyright 2007, Michael Wu <flamingice@sourmilk.net>
|
|
* Copyright 2007-2010, Intel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/ieee80211.h>
|
|
#include <linux/export.h>
|
|
#include <net/mac80211.h>
|
|
#include "ieee80211_i.h"
|
|
#include "rate.h"
|
|
|
|
static void __check_htcap_disable(struct ieee80211_ht_cap *ht_capa,
|
|
struct ieee80211_ht_cap *ht_capa_mask,
|
|
struct ieee80211_sta_ht_cap *ht_cap,
|
|
u16 flag)
|
|
{
|
|
__le16 le_flag = cpu_to_le16(flag);
|
|
if (ht_capa_mask->cap_info & le_flag) {
|
|
if (!(ht_capa->cap_info & le_flag))
|
|
ht_cap->cap &= ~flag;
|
|
}
|
|
}
|
|
|
|
void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_sta_ht_cap *ht_cap)
|
|
{
|
|
struct ieee80211_ht_cap *ht_capa, *ht_capa_mask;
|
|
u8 *scaps, *smask;
|
|
int i;
|
|
|
|
if (!ht_cap->ht_supported)
|
|
return;
|
|
|
|
switch (sdata->vif.type) {
|
|
case NL80211_IFTYPE_STATION:
|
|
ht_capa = &sdata->u.mgd.ht_capa;
|
|
ht_capa_mask = &sdata->u.mgd.ht_capa_mask;
|
|
break;
|
|
case NL80211_IFTYPE_ADHOC:
|
|
ht_capa = &sdata->u.ibss.ht_capa;
|
|
ht_capa_mask = &sdata->u.ibss.ht_capa_mask;
|
|
break;
|
|
default:
|
|
WARN_ON_ONCE(1);
|
|
return;
|
|
}
|
|
|
|
scaps = (u8 *)(&ht_capa->mcs.rx_mask);
|
|
smask = (u8 *)(&ht_capa_mask->mcs.rx_mask);
|
|
|
|
/* NOTE: If you add more over-rides here, update register_hw
|
|
* ht_capa_mod_msk logic in main.c as well.
|
|
* And, if this method can ever change ht_cap.ht_supported, fix
|
|
* the check in ieee80211_add_ht_ie.
|
|
*/
|
|
|
|
/* check for HT over-rides, MCS rates first. */
|
|
for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) {
|
|
u8 m = smask[i];
|
|
ht_cap->mcs.rx_mask[i] &= ~m; /* turn off all masked bits */
|
|
/* Add back rates that are supported */
|
|
ht_cap->mcs.rx_mask[i] |= (m & scaps[i]);
|
|
}
|
|
|
|
/* Force removal of HT-40 capabilities? */
|
|
__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
|
|
IEEE80211_HT_CAP_SUP_WIDTH_20_40);
|
|
__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
|
|
IEEE80211_HT_CAP_SGI_40);
|
|
|
|
/* Allow user to disable SGI-20 (SGI-40 is handled above) */
|
|
__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
|
|
IEEE80211_HT_CAP_SGI_20);
|
|
|
|
/* Allow user to disable the max-AMSDU bit. */
|
|
__check_htcap_disable(ht_capa, ht_capa_mask, ht_cap,
|
|
IEEE80211_HT_CAP_MAX_AMSDU);
|
|
|
|
/* Allow user to decrease AMPDU factor */
|
|
if (ht_capa_mask->ampdu_params_info &
|
|
IEEE80211_HT_AMPDU_PARM_FACTOR) {
|
|
u8 n = ht_capa->ampdu_params_info &
|
|
IEEE80211_HT_AMPDU_PARM_FACTOR;
|
|
if (n < ht_cap->ampdu_factor)
|
|
ht_cap->ampdu_factor = n;
|
|
}
|
|
|
|
/* Allow the user to increase AMPDU density. */
|
|
if (ht_capa_mask->ampdu_params_info &
|
|
IEEE80211_HT_AMPDU_PARM_DENSITY) {
|
|
u8 n = (ht_capa->ampdu_params_info &
|
|
IEEE80211_HT_AMPDU_PARM_DENSITY)
|
|
>> IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT;
|
|
if (n > ht_cap->ampdu_density)
|
|
ht_cap->ampdu_density = n;
|
|
}
|
|
}
|
|
|
|
|
|
bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata,
|
|
struct ieee80211_supported_band *sband,
|
|
const struct ieee80211_ht_cap *ht_cap_ie,
|
|
struct sta_info *sta)
|
|
{
|
|
struct ieee80211_sta_ht_cap ht_cap, own_cap;
|
|
u8 ampdu_info, tx_mcs_set_cap;
|
|
int i, max_tx_streams;
|
|
bool changed;
|
|
enum ieee80211_sta_rx_bandwidth bw;
|
|
enum ieee80211_smps_mode smps_mode;
|
|
|
|
memset(&ht_cap, 0, sizeof(ht_cap));
|
|
|
|
if (!ht_cap_ie || !sband->ht_cap.ht_supported)
|
|
goto apply;
|
|
|
|
ht_cap.ht_supported = true;
|
|
|
|
own_cap = sband->ht_cap;
|
|
|
|
/*
|
|
* If user has specified capability over-rides, take care
|
|
* of that if the station we're setting up is the AP that
|
|
* we advertised a restricted capability set to. Override
|
|
* our own capabilities and then use those below.
|
|
*/
|
|
if ((sdata->vif.type == NL80211_IFTYPE_STATION ||
|
|
sdata->vif.type == NL80211_IFTYPE_ADHOC) &&
|
|
!test_sta_flag(sta, WLAN_STA_TDLS_PEER))
|
|
ieee80211_apply_htcap_overrides(sdata, &own_cap);
|
|
|
|
/*
|
|
* The bits listed in this expression should be
|
|
* the same for the peer and us, if the station
|
|
* advertises more then we can't use those thus
|
|
* we mask them out.
|
|
*/
|
|
ht_cap.cap = le16_to_cpu(ht_cap_ie->cap_info) &
|
|
(own_cap.cap | ~(IEEE80211_HT_CAP_LDPC_CODING |
|
|
IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
|
|
IEEE80211_HT_CAP_GRN_FLD |
|
|
IEEE80211_HT_CAP_SGI_20 |
|
|
IEEE80211_HT_CAP_SGI_40 |
|
|
IEEE80211_HT_CAP_DSSSCCK40));
|
|
|
|
/*
|
|
* The STBC bits are asymmetric -- if we don't have
|
|
* TX then mask out the peer's RX and vice versa.
|
|
*/
|
|
if (!(own_cap.cap & IEEE80211_HT_CAP_TX_STBC))
|
|
ht_cap.cap &= ~IEEE80211_HT_CAP_RX_STBC;
|
|
if (!(own_cap.cap & IEEE80211_HT_CAP_RX_STBC))
|
|
ht_cap.cap &= ~IEEE80211_HT_CAP_TX_STBC;
|
|
|
|
ampdu_info = ht_cap_ie->ampdu_params_info;
|
|
ht_cap.ampdu_factor =
|
|
ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR;
|
|
ht_cap.ampdu_density =
|
|
(ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2;
|
|
|
|
/* own MCS TX capabilities */
|
|
tx_mcs_set_cap = own_cap.mcs.tx_params;
|
|
|
|
/* Copy peer MCS TX capabilities, the driver might need them. */
|
|
ht_cap.mcs.tx_params = ht_cap_ie->mcs.tx_params;
|
|
|
|
/* can we TX with MCS rates? */
|
|
if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED))
|
|
goto apply;
|
|
|
|
/* Counting from 0, therefore +1 */
|
|
if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF)
|
|
max_tx_streams =
|
|
((tx_mcs_set_cap & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
|
|
>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT) + 1;
|
|
else
|
|
max_tx_streams = IEEE80211_HT_MCS_TX_MAX_STREAMS;
|
|
|
|
/*
|
|
* 802.11n-2009 20.3.5 / 20.6 says:
|
|
* - indices 0 to 7 and 32 are single spatial stream
|
|
* - 8 to 31 are multiple spatial streams using equal modulation
|
|
* [8..15 for two streams, 16..23 for three and 24..31 for four]
|
|
* - remainder are multiple spatial streams using unequal modulation
|
|
*/
|
|
for (i = 0; i < max_tx_streams; i++)
|
|
ht_cap.mcs.rx_mask[i] =
|
|
own_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i];
|
|
|
|
if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION)
|
|
for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE;
|
|
i < IEEE80211_HT_MCS_MASK_LEN; i++)
|
|
ht_cap.mcs.rx_mask[i] =
|
|
own_cap.mcs.rx_mask[i] &
|
|
ht_cap_ie->mcs.rx_mask[i];
|
|
|
|
/* handle MCS rate 32 too */
|
|
if (own_cap.mcs.rx_mask[32/8] & ht_cap_ie->mcs.rx_mask[32/8] & 1)
|
|
ht_cap.mcs.rx_mask[32/8] |= 1;
|
|
|
|
apply:
|
|
changed = memcmp(&sta->sta.ht_cap, &ht_cap, sizeof(ht_cap));
|
|
|
|
memcpy(&sta->sta.ht_cap, &ht_cap, sizeof(ht_cap));
|
|
|
|
switch (sdata->vif.bss_conf.chandef.width) {
|
|
default:
|
|
WARN_ON_ONCE(1);
|
|
/* fall through */
|
|
case NL80211_CHAN_WIDTH_20_NOHT:
|
|
case NL80211_CHAN_WIDTH_20:
|
|
bw = IEEE80211_STA_RX_BW_20;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_40:
|
|
case NL80211_CHAN_WIDTH_80:
|
|
case NL80211_CHAN_WIDTH_80P80:
|
|
case NL80211_CHAN_WIDTH_160:
|
|
bw = ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ?
|
|
IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20;
|
|
break;
|
|
}
|
|
|
|
if (bw != sta->sta.bandwidth)
|
|
changed = true;
|
|
sta->sta.bandwidth = bw;
|
|
|
|
sta->cur_max_bandwidth =
|
|
ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ?
|
|
IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20;
|
|
|
|
switch ((ht_cap.cap & IEEE80211_HT_CAP_SM_PS)
|
|
>> IEEE80211_HT_CAP_SM_PS_SHIFT) {
|
|
case WLAN_HT_CAP_SM_PS_INVALID:
|
|
case WLAN_HT_CAP_SM_PS_STATIC:
|
|
smps_mode = IEEE80211_SMPS_STATIC;
|
|
break;
|
|
case WLAN_HT_CAP_SM_PS_DYNAMIC:
|
|
smps_mode = IEEE80211_SMPS_DYNAMIC;
|
|
break;
|
|
case WLAN_HT_CAP_SM_PS_DISABLED:
|
|
smps_mode = IEEE80211_SMPS_OFF;
|
|
break;
|
|
}
|
|
|
|
if (smps_mode != sta->sta.smps_mode)
|
|
changed = true;
|
|
sta->sta.smps_mode = smps_mode;
|
|
|
|
return changed;
|
|
}
|
|
|
|
void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta,
|
|
enum ieee80211_agg_stop_reason reason)
|
|
{
|
|
int i;
|
|
|
|
cancel_work_sync(&sta->ampdu_mlme.work);
|
|
|
|
for (i = 0; i < IEEE80211_NUM_TIDS; i++) {
|
|
__ieee80211_stop_tx_ba_session(sta, i, reason);
|
|
__ieee80211_stop_rx_ba_session(sta, i, WLAN_BACK_RECIPIENT,
|
|
WLAN_REASON_QSTA_LEAVE_QBSS,
|
|
reason != AGG_STOP_DESTROY_STA &&
|
|
reason != AGG_STOP_PEER_REQUEST);
|
|
}
|
|
}
|
|
|
|
void ieee80211_ba_session_work(struct work_struct *work)
|
|
{
|
|
struct sta_info *sta =
|
|
container_of(work, struct sta_info, ampdu_mlme.work);
|
|
struct tid_ampdu_tx *tid_tx;
|
|
int tid;
|
|
|
|
/*
|
|
* When this flag is set, new sessions should be
|
|
* blocked, and existing sessions will be torn
|
|
* down by the code that set the flag, so this
|
|
* need not run.
|
|
*/
|
|
if (test_sta_flag(sta, WLAN_STA_BLOCK_BA))
|
|
return;
|
|
|
|
mutex_lock(&sta->ampdu_mlme.mtx);
|
|
for (tid = 0; tid < IEEE80211_NUM_TIDS; tid++) {
|
|
if (test_and_clear_bit(tid, sta->ampdu_mlme.tid_rx_timer_expired))
|
|
___ieee80211_stop_rx_ba_session(
|
|
sta, tid, WLAN_BACK_RECIPIENT,
|
|
WLAN_REASON_QSTA_TIMEOUT, true);
|
|
|
|
if (test_and_clear_bit(tid,
|
|
sta->ampdu_mlme.tid_rx_stop_requested))
|
|
___ieee80211_stop_rx_ba_session(
|
|
sta, tid, WLAN_BACK_RECIPIENT,
|
|
WLAN_REASON_UNSPECIFIED, true);
|
|
|
|
spin_lock_bh(&sta->lock);
|
|
|
|
tid_tx = sta->ampdu_mlme.tid_start_tx[tid];
|
|
if (tid_tx) {
|
|
/*
|
|
* Assign it over to the normal tid_tx array
|
|
* where it "goes live".
|
|
*/
|
|
|
|
sta->ampdu_mlme.tid_start_tx[tid] = NULL;
|
|
/* could there be a race? */
|
|
if (sta->ampdu_mlme.tid_tx[tid])
|
|
kfree(tid_tx);
|
|
else
|
|
ieee80211_assign_tid_tx(sta, tid, tid_tx);
|
|
spin_unlock_bh(&sta->lock);
|
|
|
|
ieee80211_tx_ba_session_handle_start(sta, tid);
|
|
continue;
|
|
}
|
|
spin_unlock_bh(&sta->lock);
|
|
|
|
tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
|
|
if (tid_tx && test_and_clear_bit(HT_AGG_STATE_WANT_STOP,
|
|
&tid_tx->state))
|
|
___ieee80211_stop_tx_ba_session(sta, tid,
|
|
AGG_STOP_LOCAL_REQUEST);
|
|
}
|
|
mutex_unlock(&sta->ampdu_mlme.mtx);
|
|
}
|
|
|
|
void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
|
|
const u8 *da, u16 tid,
|
|
u16 initiator, u16 reason_code)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct sk_buff *skb;
|
|
struct ieee80211_mgmt *mgmt;
|
|
u16 params;
|
|
|
|
skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
|
|
if (!skb)
|
|
return;
|
|
|
|
skb_reserve(skb, local->hw.extra_tx_headroom);
|
|
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
|
|
memset(mgmt, 0, 24);
|
|
memcpy(mgmt->da, da, ETH_ALEN);
|
|
memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
|
|
if (sdata->vif.type == NL80211_IFTYPE_AP ||
|
|
sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
|
|
sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
|
|
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
|
|
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
|
|
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
|
|
else if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
|
|
memcpy(mgmt->bssid, sdata->u.ibss.bssid, ETH_ALEN);
|
|
|
|
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
|
|
IEEE80211_STYPE_ACTION);
|
|
|
|
skb_put(skb, 1 + sizeof(mgmt->u.action.u.delba));
|
|
|
|
mgmt->u.action.category = WLAN_CATEGORY_BACK;
|
|
mgmt->u.action.u.delba.action_code = WLAN_ACTION_DELBA;
|
|
params = (u16)(initiator << 11); /* bit 11 initiator */
|
|
params |= (u16)(tid << 12); /* bit 15:12 TID number */
|
|
|
|
mgmt->u.action.u.delba.params = cpu_to_le16(params);
|
|
mgmt->u.action.u.delba.reason_code = cpu_to_le16(reason_code);
|
|
|
|
ieee80211_tx_skb_tid(sdata, skb, tid);
|
|
}
|
|
|
|
void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata,
|
|
struct sta_info *sta,
|
|
struct ieee80211_mgmt *mgmt, size_t len)
|
|
{
|
|
u16 tid, params;
|
|
u16 initiator;
|
|
|
|
params = le16_to_cpu(mgmt->u.action.u.delba.params);
|
|
tid = (params & IEEE80211_DELBA_PARAM_TID_MASK) >> 12;
|
|
initiator = (params & IEEE80211_DELBA_PARAM_INITIATOR_MASK) >> 11;
|
|
|
|
ht_dbg_ratelimited(sdata, "delba from %pM (%s) tid %d reason code %d\n",
|
|
mgmt->sa, initiator ? "initiator" : "recipient",
|
|
tid,
|
|
le16_to_cpu(mgmt->u.action.u.delba.reason_code));
|
|
|
|
if (initiator == WLAN_BACK_INITIATOR)
|
|
__ieee80211_stop_rx_ba_session(sta, tid, WLAN_BACK_INITIATOR, 0,
|
|
true);
|
|
else
|
|
__ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_PEER_REQUEST);
|
|
}
|
|
|
|
int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata,
|
|
enum ieee80211_smps_mode smps, const u8 *da,
|
|
const u8 *bssid)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
struct sk_buff *skb;
|
|
struct ieee80211_mgmt *action_frame;
|
|
|
|
/* 27 = header + category + action + smps mode */
|
|
skb = dev_alloc_skb(27 + local->hw.extra_tx_headroom);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
|
|
skb_reserve(skb, local->hw.extra_tx_headroom);
|
|
action_frame = (void *)skb_put(skb, 27);
|
|
memcpy(action_frame->da, da, ETH_ALEN);
|
|
memcpy(action_frame->sa, sdata->dev->dev_addr, ETH_ALEN);
|
|
memcpy(action_frame->bssid, bssid, ETH_ALEN);
|
|
action_frame->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
|
|
IEEE80211_STYPE_ACTION);
|
|
action_frame->u.action.category = WLAN_CATEGORY_HT;
|
|
action_frame->u.action.u.ht_smps.action = WLAN_HT_ACTION_SMPS;
|
|
switch (smps) {
|
|
case IEEE80211_SMPS_AUTOMATIC:
|
|
case IEEE80211_SMPS_NUM_MODES:
|
|
WARN_ON(1);
|
|
case IEEE80211_SMPS_OFF:
|
|
action_frame->u.action.u.ht_smps.smps_control =
|
|
WLAN_HT_SMPS_CONTROL_DISABLED;
|
|
break;
|
|
case IEEE80211_SMPS_STATIC:
|
|
action_frame->u.action.u.ht_smps.smps_control =
|
|
WLAN_HT_SMPS_CONTROL_STATIC;
|
|
break;
|
|
case IEEE80211_SMPS_DYNAMIC:
|
|
action_frame->u.action.u.ht_smps.smps_control =
|
|
WLAN_HT_SMPS_CONTROL_DYNAMIC;
|
|
break;
|
|
}
|
|
|
|
/* we'll do more on status of this frame */
|
|
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
|
|
ieee80211_tx_skb(sdata, skb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ieee80211_request_smps_mgd_work(struct work_struct *work)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata =
|
|
container_of(work, struct ieee80211_sub_if_data,
|
|
u.mgd.request_smps_work);
|
|
|
|
sdata_lock(sdata);
|
|
__ieee80211_request_smps_mgd(sdata, sdata->u.mgd.driver_smps_mode);
|
|
sdata_unlock(sdata);
|
|
}
|
|
|
|
void ieee80211_request_smps_ap_work(struct work_struct *work)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata =
|
|
container_of(work, struct ieee80211_sub_if_data,
|
|
u.ap.request_smps_work);
|
|
|
|
sdata_lock(sdata);
|
|
__ieee80211_request_smps_ap(sdata, sdata->u.ap.driver_smps_mode);
|
|
sdata_unlock(sdata);
|
|
}
|
|
|
|
void ieee80211_request_smps(struct ieee80211_vif *vif,
|
|
enum ieee80211_smps_mode smps_mode)
|
|
{
|
|
struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
|
|
|
|
if (WARN_ON_ONCE(vif->type != NL80211_IFTYPE_STATION &&
|
|
vif->type != NL80211_IFTYPE_AP))
|
|
return;
|
|
|
|
if (WARN_ON(smps_mode == IEEE80211_SMPS_OFF))
|
|
smps_mode = IEEE80211_SMPS_AUTOMATIC;
|
|
|
|
if (vif->type == NL80211_IFTYPE_STATION) {
|
|
if (sdata->u.mgd.driver_smps_mode == smps_mode)
|
|
return;
|
|
sdata->u.mgd.driver_smps_mode = smps_mode;
|
|
ieee80211_queue_work(&sdata->local->hw,
|
|
&sdata->u.mgd.request_smps_work);
|
|
} else {
|
|
/* AUTOMATIC is meaningless in AP mode */
|
|
if (WARN_ON_ONCE(smps_mode == IEEE80211_SMPS_AUTOMATIC))
|
|
return;
|
|
if (sdata->u.ap.driver_smps_mode == smps_mode)
|
|
return;
|
|
sdata->u.ap.driver_smps_mode = smps_mode;
|
|
ieee80211_queue_work(&sdata->local->hw,
|
|
&sdata->u.ap.request_smps_work);
|
|
}
|
|
}
|
|
/* this might change ... don't want non-open drivers using it */
|
|
EXPORT_SYMBOL_GPL(ieee80211_request_smps);
|