mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-29 13:00:35 +00:00
a5ebba6b54
These are various power management related changes, mainly concerning
cpuidle on i.MX and OMAP, as well as a the move of the omap smartreflex
driver to live in the power subsystem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=tgT5
-----END PGP SIGNATURE-----
Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc power management changes from Arnd Bergmann:
"These are various power management related changes, mainly concerning
cpuidle on i.MX and OMAP, as well as a the move of the omap
smartreflex driver to live in the power subsystem."
Fix up conflicts in arch/arm/mach-{imx/mach-imx6q.c,omap2/prm2xxx_3xxx.h}
* tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge
ARM: OMAP2+: do not allow SmartReflex to be built as a module
ARM: OMAP2: Use hwmod to initialize mmc for 2420
ARM: OMAP3: PM: cpuidle: optimize the clkdm idle latency in C1 state
ARM: OMAP3: PM: cpuidle: optimize the PER latency in C1 state
ARM: OMAP3: PM: cpuidle: default to C1 in next_valid_state
ARM: OMAP3: PM: cleanup cam_pwrdm leftovers
ARM: OMAP3: PM: call pre/post transition per powerdomain
ARM: OMAP2+: powerdomain: allow pre/post transtion to be per pwrdm
ARM: OMAP3: PM: Remove IO Daisychain control from cpuidle
ARM: OMAP3PLUS: hwmod: reconfigure IO Daisychain during hwmod mux
ARM: OMAP3+: PRM: Enable IO wake up
ARM: OMAP4: PRM: Add IO Daisychain support
ARM: OMAP3: PM: Move IO Daisychain function to omap3 prm file
ARM: OMAP3: PM: correct enable/disable of daisy io chain
ARM: OMAP2+: PRM: fix compile for OMAP4-only build
W1: OMAP HDQ1W: use runtime PM
ARM: OMAP2+: HDQ1W: use omap_device
W1: OMAP HDQ1W: use 32-bit register accesses
W1: OMAP HDQ1W: allow driver to be built on all OMAP2+
...
322 lines
9.2 KiB
C
322 lines
9.2 KiB
C
/*
|
|
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
|
|
#include <mach/common.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/iomux-mx53.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include "devices-imx53.h"
|
|
|
|
#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8)
|
|
#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14)
|
|
#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15)
|
|
#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6)
|
|
#define LOCO_LED IMX_GPIO_NR(7, 7)
|
|
#define LOCO_SD3_CD IMX_GPIO_NR(3, 11)
|
|
#define LOCO_SD3_WP IMX_GPIO_NR(3, 12)
|
|
#define LOCO_SD1_CD IMX_GPIO_NR(3, 13)
|
|
#define LOCO_ACCEL_EN IMX_GPIO_NR(6, 14)
|
|
|
|
static iomux_v3_cfg_t mx53_loco_pads[] = {
|
|
/* FEC */
|
|
MX53_PAD_FEC_MDC__FEC_MDC,
|
|
MX53_PAD_FEC_MDIO__FEC_MDIO,
|
|
MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
|
|
MX53_PAD_FEC_RX_ER__FEC_RX_ER,
|
|
MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
|
|
MX53_PAD_FEC_RXD1__FEC_RDATA_1,
|
|
MX53_PAD_FEC_RXD0__FEC_RDATA_0,
|
|
MX53_PAD_FEC_TX_EN__FEC_TX_EN,
|
|
MX53_PAD_FEC_TXD1__FEC_TDATA_1,
|
|
MX53_PAD_FEC_TXD0__FEC_TDATA_0,
|
|
/* FEC_nRST */
|
|
MX53_PAD_PATA_DA_0__GPIO7_6,
|
|
/* FEC_nINT */
|
|
MX53_PAD_PATA_DATA4__GPIO2_4,
|
|
/* AUDMUX5 */
|
|
MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
|
|
MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
|
|
MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
|
|
MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
|
|
/* I2C1 */
|
|
MX53_PAD_CSI0_DAT8__I2C1_SDA,
|
|
MX53_PAD_CSI0_DAT9__I2C1_SCL,
|
|
MX53_PAD_NANDF_CS1__GPIO6_14, /* Accelerometer Enable */
|
|
/* I2C2 */
|
|
MX53_PAD_KEY_COL3__I2C2_SCL,
|
|
MX53_PAD_KEY_ROW3__I2C2_SDA,
|
|
/* SD1 */
|
|
MX53_PAD_SD1_CMD__ESDHC1_CMD,
|
|
MX53_PAD_SD1_CLK__ESDHC1_CLK,
|
|
MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
|
|
MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
|
|
MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
|
|
MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
|
|
/* SD1_CD */
|
|
MX53_PAD_EIM_DA13__GPIO3_13,
|
|
/* SD3 */
|
|
MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
|
|
MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
|
|
MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
|
|
MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
|
|
MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
|
|
MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
|
|
MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
|
|
MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
|
|
MX53_PAD_PATA_IORDY__ESDHC3_CLK,
|
|
MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
|
|
/* SD3_CD */
|
|
MX53_PAD_EIM_DA11__GPIO3_11,
|
|
/* SD3_WP */
|
|
MX53_PAD_EIM_DA12__GPIO3_12,
|
|
/* VGA */
|
|
MX53_PAD_EIM_OE__IPU_DI1_PIN7,
|
|
MX53_PAD_EIM_RW__IPU_DI1_PIN8,
|
|
/* DISPLB */
|
|
MX53_PAD_EIM_D20__IPU_SER_DISP0_CS,
|
|
MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK,
|
|
MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN,
|
|
MX53_PAD_EIM_D23__IPU_DI0_D0_CS,
|
|
/* DISP0_POWER_EN */
|
|
MX53_PAD_EIM_D24__GPIO3_24,
|
|
/* DISP0 DET INT */
|
|
MX53_PAD_EIM_D31__GPIO3_31,
|
|
/* LVDS */
|
|
MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
|
|
MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
|
|
MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
|
|
MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
|
|
MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
|
|
MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
|
|
MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
|
|
MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
|
|
MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
|
|
MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
|
|
/* I2C1 */
|
|
MX53_PAD_CSI0_DAT8__I2C1_SDA,
|
|
MX53_PAD_CSI0_DAT9__I2C1_SCL,
|
|
/* UART1 */
|
|
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
|
|
MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
|
|
/* CSI0 */
|
|
MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
|
|
MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
|
|
MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
|
|
MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
|
|
MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
|
|
MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
|
|
MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
|
|
MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
|
|
MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
|
|
MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
|
|
MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
|
|
/* DISPLAY */
|
|
MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
|
|
MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
|
|
MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
|
|
MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
|
|
MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
|
|
MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
|
|
MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
|
|
MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
|
|
MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
|
|
MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
|
|
MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
|
|
MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
|
|
MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
|
|
MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
|
|
MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
|
|
MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
|
|
MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
|
|
MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
|
|
MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
|
|
MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
|
|
MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
|
|
MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
|
|
MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
|
|
MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
|
|
MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
|
|
MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
|
|
MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
|
|
MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
|
|
/* Audio CLK*/
|
|
MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK,
|
|
/* PWM */
|
|
MX53_PAD_GPIO_1__PWM2_PWMO,
|
|
/* SPDIF */
|
|
MX53_PAD_GPIO_7__SPDIF_PLOCK,
|
|
MX53_PAD_GPIO_17__SPDIF_OUT1,
|
|
/* GPIO */
|
|
MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */
|
|
MX53_PAD_PATA_DA_2__GPIO7_8,
|
|
MX53_PAD_PATA_DATA5__GPIO2_5,
|
|
MX53_PAD_PATA_DATA6__GPIO2_6,
|
|
MX53_PAD_PATA_DATA14__GPIO2_14,
|
|
MX53_PAD_PATA_DATA15__GPIO2_15,
|
|
MX53_PAD_PATA_INTRQ__GPIO7_2,
|
|
MX53_PAD_EIM_WAIT__GPIO5_0,
|
|
MX53_PAD_NANDF_WP_B__GPIO6_9,
|
|
MX53_PAD_NANDF_RB0__GPIO6_10,
|
|
MX53_PAD_NANDF_CS1__GPIO6_14,
|
|
MX53_PAD_NANDF_CS2__GPIO6_15,
|
|
MX53_PAD_NANDF_CS3__GPIO6_16,
|
|
MX53_PAD_GPIO_5__GPIO1_5,
|
|
MX53_PAD_GPIO_16__GPIO7_11,
|
|
MX53_PAD_GPIO_8__GPIO1_8,
|
|
};
|
|
|
|
#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
|
|
{ \
|
|
.gpio = gpio_num, \
|
|
.type = EV_KEY, \
|
|
.code = ev_code, \
|
|
.active_low = act_low, \
|
|
.desc = "btn " descr, \
|
|
.wakeup = wake, \
|
|
}
|
|
|
|
static struct gpio_keys_button loco_buttons[] = {
|
|
GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
|
|
GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
|
|
GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
|
|
};
|
|
|
|
static const struct gpio_keys_platform_data loco_button_data __initconst = {
|
|
.buttons = loco_buttons,
|
|
.nbuttons = ARRAY_SIZE(loco_buttons),
|
|
};
|
|
|
|
static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
|
|
.cd_gpio = LOCO_SD1_CD,
|
|
.cd_type = ESDHC_CD_GPIO,
|
|
.wp_type = ESDHC_WP_NONE,
|
|
};
|
|
|
|
static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
|
|
.cd_gpio = LOCO_SD3_CD,
|
|
.wp_gpio = LOCO_SD3_WP,
|
|
.cd_type = ESDHC_CD_GPIO,
|
|
.wp_type = ESDHC_WP_GPIO,
|
|
};
|
|
|
|
static inline void mx53_loco_fec_reset(void)
|
|
{
|
|
int ret;
|
|
|
|
/* reset FEC PHY */
|
|
ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
|
|
if (ret) {
|
|
printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
|
|
return;
|
|
}
|
|
gpio_direction_output(LOCO_FEC_PHY_RST, 0);
|
|
msleep(1);
|
|
gpio_set_value(LOCO_FEC_PHY_RST, 1);
|
|
}
|
|
|
|
static const struct fec_platform_data mx53_loco_fec_data __initconst = {
|
|
.phy = PHY_INTERFACE_MODE_RMII,
|
|
};
|
|
|
|
static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
|
|
.bitrate = 100000,
|
|
};
|
|
|
|
static const struct gpio_led mx53loco_leds[] __initconst = {
|
|
{
|
|
.name = "green",
|
|
.default_trigger = "heartbeat",
|
|
.gpio = LOCO_LED,
|
|
},
|
|
};
|
|
|
|
static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
|
|
.leds = mx53loco_leds,
|
|
.num_leds = ARRAY_SIZE(mx53loco_leds),
|
|
};
|
|
|
|
void __init imx53_qsb_common_init(void)
|
|
{
|
|
mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
|
|
ARRAY_SIZE(mx53_loco_pads));
|
|
}
|
|
|
|
static struct i2c_board_info mx53loco_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("mma8450", 0x1C),
|
|
},
|
|
};
|
|
|
|
static void __init mx53_loco_board_init(void)
|
|
{
|
|
int ret;
|
|
imx53_soc_init();
|
|
imx53_qsb_common_init();
|
|
|
|
imx53_add_imx_uart(0, NULL);
|
|
mx53_loco_fec_reset();
|
|
imx53_add_fec(&mx53_loco_fec_data);
|
|
imx53_add_imx2_wdt(0);
|
|
|
|
ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
|
|
if (ret)
|
|
pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
|
|
|
|
i2c_register_board_info(0, mx53loco_i2c_devices,
|
|
ARRAY_SIZE(mx53loco_i2c_devices));
|
|
imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
|
|
imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
|
|
imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
|
|
imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
|
|
imx_add_gpio_keys(&loco_button_data);
|
|
gpio_led_register_device(-1, &mx53loco_leds_data);
|
|
imx53_add_ahci_imx();
|
|
}
|
|
|
|
static void __init mx53_loco_timer_init(void)
|
|
{
|
|
mx53_clocks_init(32768, 24000000, 0, 0);
|
|
}
|
|
|
|
static struct sys_timer mx53_loco_timer = {
|
|
.init = mx53_loco_timer_init,
|
|
};
|
|
|
|
MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
|
|
.map_io = mx53_map_io,
|
|
.init_early = imx53_init_early,
|
|
.init_irq = mx53_init_irq,
|
|
.handle_irq = imx53_handle_irq,
|
|
.timer = &mx53_loco_timer,
|
|
.init_machine = mx53_loco_board_init,
|
|
.init_late = imx53_init_late,
|
|
.restart = mxc_restart,
|
|
MACHINE_END
|