linux/drivers/acpi
Yinghai Lu 20e6926dcb x86, ACPI, mm: Revert movablemem_map support
Tim found:

  WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80()
  Hardware name: S2600CP
  sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
  smpboot: Booting Node   1, Processors  #1
  Modules linked in:
  Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1
  Call Trace:
    set_cpu_sibling_map+0x279/0x449
    start_secondary+0x11d/0x1e5

Don Morris reproduced on a HP z620 workstation, and bisected it to
commit e8d1955258 ("acpi, memory-hotplug: parse SRAT before memblock
is ready")

It turns out movable_map has some problems, and it breaks several things

1. numa_init is called several times, NOT just for srat. so those
	nodes_clear(numa_nodes_parsed)
	memset(&numa_meminfo, 0, sizeof(numa_meminfo))
   can not be just removed.  Need to consider sequence is: numaq, srat, amd, dummy.
   and make fall back path working.

2. simply split acpi_numa_init to early_parse_srat.
   a. that early_parse_srat is NOT called for ia64, so you break ia64.
   b.  for (i = 0; i < MAX_LOCAL_APIC; i++)
	     set_apicid_to_node(i, NUMA_NO_NODE)
     still left in numa_init. So it will just clear result from early_parse_srat.
     it should be moved before that....
   c.  it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved
       early before override from INITRD is settled.

3. that patch TITLE is total misleading, there is NO x86 in the title,
   but it changes critical x86 code. It caused x86 guys did not
   pay attention to find the problem early. Those patches really should
   be routed via tip/x86/mm.

4. after that commit, following range can not use movable ram:
  a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed?
  b. initrd... it will be freed after booting, so it could be on movable...
  c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G
	anymore.
  d. init_mem_mapping: can not put page table high anymore.
  e. initmem_init: vmemmap can not be high local node anymore. That is
     not good.

If node is hotplugable, the mem related range like page table and
vmemmap could be on the that node without problem and should be on that
node.

We have workaround patch that could fix some problems, but some can not
be fixed.

So just remove that offending commit and related ones including:

 f7210e6c4a ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to
    protect movablecore_map in memblock_overlaps_region().")

 01a178a94e ("acpi, memory-hotplug: support getting hotplug info from
    SRAT")

 27168d38fa ("acpi, memory-hotplug: extend movablemem_map ranges to
    the end of node")

 e8d1955258 ("acpi, memory-hotplug: parse SRAT before memblock is
    ready")

 fb06bc8e5f ("page_alloc: bootmem limit with movablecore_map")

 42f47e27e7 ("page_alloc: make movablemem_map have higher priority")

 6981ec3114 ("page_alloc: introduce zone_movable_limit[] to keep
    movable limit for nodes")

 34b71f1e04 ("page_alloc: add movable_memmap kernel parameter")

 4d59a75125 ("x86: get pg_data_t's memory from other node")

Later we should have patches that will make sure kernel put page table
and vmemmap on local node ram instead of push them down to node0.  Also
need to find way to put other kernel used ram to local node ram.

Reported-by: Tim Gardner <tim.gardner@canonical.com>
Reported-by: Don Morris <don.morris@hp.com>
Bisected-by: Don Morris <don.morris@hp.com>
Tested-by: Don Morris <don.morris@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-02 09:34:39 -08:00
..
acpica
apei Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac 2013-02-28 20:42:33 -08:00
ac.c
acpi_i2c.c
acpi_ipmi.c
acpi_memhotplug.c memory-hotplug: remove sysfs file of node 2013-02-23 17:50:13 -08:00
acpi_pad.c
acpi_platform.c
battery.c
bgrt.c
blacklist.c
bus.c
button.c
cm_sbs.c
container.c
csrt.c
custom_method.c The sweeping change is to make add_taint() explicitly indicate whether to disable 2013-02-25 15:41:43 -08:00
debugfs.c
device_pm.c
dock.c
ec_sys.c
ec.c
event.c
fan.c
glue.c
hed.c
internal.h ACPI and power management fixes for 3.9-rc1 2013-02-25 21:25:17 -08:00
Kconfig Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2013-02-27 16:16:39 -08:00
Makefile
numa.c x86, ACPI, mm: Revert movablemem_map support 2013-03-02 09:34:39 -08:00
nvs.c
osl.c PCI changes for the v3.9 merge window: 2013-02-25 21:18:18 -08:00
pci_irq.c
pci_link.c
pci_root.c PCI changes for the v3.9 merge window: 2013-02-25 21:18:18 -08:00
pci_slot.c PCI changes for the v3.9 merge window: 2013-02-25 21:18:18 -08:00
power.c ACPI / PM: Take unusual configurations of power resources into account 2013-02-23 23:15:21 +01:00
proc.c
processor_core.c
processor_driver.c cpu-hotplug, memory-hotplug: try offlining the node when hotremoving a cpu 2013-02-23 17:50:13 -08:00
processor_idle.c
processor_perflib.c
processor_thermal.c
processor_throttling.c
reboot.c
resource.c
sbs.c
sbshc.c
sbshc.h
scan.c ACPI and power management fixes for 3.9-rc1 2013-02-25 21:25:17 -08:00
sleep.c
sleep.h
sysfs.c
tables.c
thermal.c
utils.c
video_detect.c
video.c
wakeup.c