mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-21 00:42:16 +00:00
b6e434a540
The MUSB code clears TXCSR_DMAMODE incorrectly in several places, either asserting that TXCSR_DMAENAB is clear (when sometimes it isn't) or clearing both bits together. Recent versions of the programmer's guide require DMAENAB to be cleared first, although some older ones didn't. Fix this and while at it: - In musb_gadget::txstate(), stop clearing the AUTOSET and DMAMODE bits for the CPPI case since they never get set anyway (the former bit is reserved on DaVinci); but do clear the DMAENAB bit on the DMA error path. - In musb_host::musb_ep_program(), remove the duplicate DMA controller specific code code clearing the TXCSR previous state, add the code to clear TXCSR DMA bits on the Inventra DMA error path, to replace such code (executed late) on the PIO path. - In musbhsdma::dma_channel_abort()/dma_controller_irq(), add/use the 'offset' variable to avoid MUSB_EP_OFFSET() invocations on every RXCSR/TXCSR access. [dbrownell@users.sourceforge.net: don't introduce CamelCase, shrink diff] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
392 lines
11 KiB
C
392 lines
11 KiB
C
/*
|
|
* MUSB OTG driver - support for Mentor's DMA controller
|
|
*
|
|
* Copyright 2005 Mentor Graphics Corporation
|
|
* Copyright (C) 2005-2007 by Texas Instruments
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
|
* 02110-1301 USA
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
* NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include "musb_core.h"
|
|
#include "musbhsdma.h"
|
|
|
|
static int dma_controller_start(struct dma_controller *c)
|
|
{
|
|
/* nothing to do */
|
|
return 0;
|
|
}
|
|
|
|
static void dma_channel_release(struct dma_channel *channel);
|
|
|
|
static int dma_controller_stop(struct dma_controller *c)
|
|
{
|
|
struct musb_dma_controller *controller = container_of(c,
|
|
struct musb_dma_controller, controller);
|
|
struct musb *musb = controller->private_data;
|
|
struct dma_channel *channel;
|
|
u8 bit;
|
|
|
|
if (controller->used_channels != 0) {
|
|
dev_err(musb->controller,
|
|
"Stopping DMA controller while channel active\n");
|
|
|
|
for (bit = 0; bit < MUSB_HSDMA_CHANNELS; bit++) {
|
|
if (controller->used_channels & (1 << bit)) {
|
|
channel = &controller->channel[bit].channel;
|
|
dma_channel_release(channel);
|
|
|
|
if (!controller->used_channels)
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct dma_channel *dma_channel_allocate(struct dma_controller *c,
|
|
struct musb_hw_ep *hw_ep, u8 transmit)
|
|
{
|
|
struct musb_dma_controller *controller = container_of(c,
|
|
struct musb_dma_controller, controller);
|
|
struct musb_dma_channel *musb_channel = NULL;
|
|
struct dma_channel *channel = NULL;
|
|
u8 bit;
|
|
|
|
for (bit = 0; bit < MUSB_HSDMA_CHANNELS; bit++) {
|
|
if (!(controller->used_channels & (1 << bit))) {
|
|
controller->used_channels |= (1 << bit);
|
|
musb_channel = &(controller->channel[bit]);
|
|
musb_channel->controller = controller;
|
|
musb_channel->idx = bit;
|
|
musb_channel->epnum = hw_ep->epnum;
|
|
musb_channel->transmit = transmit;
|
|
channel = &(musb_channel->channel);
|
|
channel->private_data = musb_channel;
|
|
channel->status = MUSB_DMA_STATUS_FREE;
|
|
channel->max_len = 0x10000;
|
|
/* Tx => mode 1; Rx => mode 0 */
|
|
channel->desired_mode = transmit;
|
|
channel->actual_len = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return channel;
|
|
}
|
|
|
|
static void dma_channel_release(struct dma_channel *channel)
|
|
{
|
|
struct musb_dma_channel *musb_channel = channel->private_data;
|
|
|
|
channel->actual_len = 0;
|
|
musb_channel->start_addr = 0;
|
|
musb_channel->len = 0;
|
|
|
|
musb_channel->controller->used_channels &=
|
|
~(1 << musb_channel->idx);
|
|
|
|
channel->status = MUSB_DMA_STATUS_UNKNOWN;
|
|
}
|
|
|
|
static void configure_channel(struct dma_channel *channel,
|
|
u16 packet_sz, u8 mode,
|
|
dma_addr_t dma_addr, u32 len)
|
|
{
|
|
struct musb_dma_channel *musb_channel = channel->private_data;
|
|
struct musb_dma_controller *controller = musb_channel->controller;
|
|
void __iomem *mbase = controller->base;
|
|
u8 bchannel = musb_channel->idx;
|
|
u16 csr = 0;
|
|
|
|
DBG(4, "%p, pkt_sz %d, addr 0x%x, len %d, mode %d\n",
|
|
channel, packet_sz, dma_addr, len, mode);
|
|
|
|
if (mode) {
|
|
csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
|
|
BUG_ON(len < packet_sz);
|
|
|
|
if (packet_sz >= 64) {
|
|
csr |= MUSB_HSDMA_BURSTMODE_INCR16
|
|
<< MUSB_HSDMA_BURSTMODE_SHIFT;
|
|
} else if (packet_sz >= 32) {
|
|
csr |= MUSB_HSDMA_BURSTMODE_INCR8
|
|
<< MUSB_HSDMA_BURSTMODE_SHIFT;
|
|
} else if (packet_sz >= 16) {
|
|
csr |= MUSB_HSDMA_BURSTMODE_INCR4
|
|
<< MUSB_HSDMA_BURSTMODE_SHIFT;
|
|
}
|
|
}
|
|
|
|
csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
|
|
| (1 << MUSB_HSDMA_ENABLE_SHIFT)
|
|
| (1 << MUSB_HSDMA_IRQENABLE_SHIFT)
|
|
| (musb_channel->transmit
|
|
? (1 << MUSB_HSDMA_TRANSMIT_SHIFT)
|
|
: 0);
|
|
|
|
/* address/count */
|
|
musb_write_hsdma_addr(mbase, bchannel, dma_addr);
|
|
musb_write_hsdma_count(mbase, bchannel, len);
|
|
|
|
/* control (this should start things) */
|
|
musb_writew(mbase,
|
|
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL),
|
|
csr);
|
|
}
|
|
|
|
static int dma_channel_program(struct dma_channel *channel,
|
|
u16 packet_sz, u8 mode,
|
|
dma_addr_t dma_addr, u32 len)
|
|
{
|
|
struct musb_dma_channel *musb_channel = channel->private_data;
|
|
|
|
DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n",
|
|
musb_channel->epnum,
|
|
musb_channel->transmit ? "Tx" : "Rx",
|
|
packet_sz, dma_addr, len, mode);
|
|
|
|
BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
|
|
channel->status == MUSB_DMA_STATUS_BUSY);
|
|
|
|
channel->actual_len = 0;
|
|
musb_channel->start_addr = dma_addr;
|
|
musb_channel->len = len;
|
|
musb_channel->max_packet_sz = packet_sz;
|
|
channel->status = MUSB_DMA_STATUS_BUSY;
|
|
|
|
if ((mode == 1) && (len >= packet_sz))
|
|
configure_channel(channel, packet_sz, 1, dma_addr, len);
|
|
else
|
|
configure_channel(channel, packet_sz, 0, dma_addr, len);
|
|
|
|
return true;
|
|
}
|
|
|
|
static int dma_channel_abort(struct dma_channel *channel)
|
|
{
|
|
struct musb_dma_channel *musb_channel = channel->private_data;
|
|
void __iomem *mbase = musb_channel->controller->base;
|
|
|
|
u8 bchannel = musb_channel->idx;
|
|
int offset;
|
|
u16 csr;
|
|
|
|
if (channel->status == MUSB_DMA_STATUS_BUSY) {
|
|
if (musb_channel->transmit) {
|
|
offset = MUSB_EP_OFFSET(musb_channel->epnum,
|
|
MUSB_TXCSR);
|
|
|
|
/*
|
|
* The programming guide says that we must clear
|
|
* the DMAENAB bit before the DMAMODE bit...
|
|
*/
|
|
csr = musb_readw(mbase, offset);
|
|
csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
|
|
musb_writew(mbase, offset, csr);
|
|
csr &= ~MUSB_TXCSR_DMAMODE;
|
|
musb_writew(mbase, offset, csr);
|
|
} else {
|
|
offset = MUSB_EP_OFFSET(musb_channel->epnum,
|
|
MUSB_RXCSR);
|
|
|
|
csr = musb_readw(mbase, offset);
|
|
csr &= ~(MUSB_RXCSR_AUTOCLEAR |
|
|
MUSB_RXCSR_DMAENAB |
|
|
MUSB_RXCSR_DMAMODE);
|
|
musb_writew(mbase, offset, csr);
|
|
}
|
|
|
|
musb_writew(mbase,
|
|
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL),
|
|
0);
|
|
musb_write_hsdma_addr(mbase, bchannel, 0);
|
|
musb_write_hsdma_count(mbase, bchannel, 0);
|
|
channel->status = MUSB_DMA_STATUS_FREE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t dma_controller_irq(int irq, void *private_data)
|
|
{
|
|
struct musb_dma_controller *controller = private_data;
|
|
struct musb *musb = controller->private_data;
|
|
struct musb_dma_channel *musb_channel;
|
|
struct dma_channel *channel;
|
|
|
|
void __iomem *mbase = controller->base;
|
|
|
|
irqreturn_t retval = IRQ_NONE;
|
|
|
|
unsigned long flags;
|
|
|
|
u8 bchannel;
|
|
u8 int_hsdma;
|
|
|
|
u32 addr;
|
|
u16 csr;
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
|
|
int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
|
|
if (!int_hsdma)
|
|
goto done;
|
|
|
|
for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) {
|
|
if (int_hsdma & (1 << bchannel)) {
|
|
musb_channel = (struct musb_dma_channel *)
|
|
&(controller->channel[bchannel]);
|
|
channel = &musb_channel->channel;
|
|
|
|
csr = musb_readw(mbase,
|
|
MUSB_HSDMA_CHANNEL_OFFSET(bchannel,
|
|
MUSB_HSDMA_CONTROL));
|
|
|
|
if (csr & (1 << MUSB_HSDMA_BUSERROR_SHIFT)) {
|
|
musb_channel->channel.status =
|
|
MUSB_DMA_STATUS_BUS_ABORT;
|
|
} else {
|
|
u8 devctl;
|
|
|
|
addr = musb_read_hsdma_addr(mbase,
|
|
bchannel);
|
|
channel->actual_len = addr
|
|
- musb_channel->start_addr;
|
|
|
|
DBG(2, "ch %p, 0x%x -> 0x%x (%d / %d) %s\n",
|
|
channel, musb_channel->start_addr,
|
|
addr, channel->actual_len,
|
|
musb_channel->len,
|
|
(channel->actual_len
|
|
< musb_channel->len) ?
|
|
"=> reconfig 0" : "=> complete");
|
|
|
|
devctl = musb_readb(mbase, MUSB_DEVCTL);
|
|
|
|
channel->status = MUSB_DMA_STATUS_FREE;
|
|
|
|
/* completed */
|
|
if ((devctl & MUSB_DEVCTL_HM)
|
|
&& (musb_channel->transmit)
|
|
&& ((channel->desired_mode == 0)
|
|
|| (channel->actual_len &
|
|
(musb_channel->max_packet_sz - 1)))
|
|
) {
|
|
u8 epnum = musb_channel->epnum;
|
|
int offset = MUSB_EP_OFFSET(epnum,
|
|
MUSB_TXCSR);
|
|
u16 txcsr;
|
|
|
|
/*
|
|
* The programming guide says that we
|
|
* must clear DMAENAB before DMAMODE.
|
|
*/
|
|
musb_ep_select(mbase, epnum);
|
|
txcsr = musb_readw(mbase, offset);
|
|
txcsr &= ~(MUSB_TXCSR_DMAENAB
|
|
| MUSB_TXCSR_AUTOSET);
|
|
musb_writew(mbase, offset, txcsr);
|
|
/* Send out the packet */
|
|
txcsr &= ~MUSB_TXCSR_DMAMODE;
|
|
txcsr |= MUSB_TXCSR_TXPKTRDY;
|
|
musb_writew(mbase, offset, txcsr);
|
|
}
|
|
musb_dma_completion(musb, musb_channel->epnum,
|
|
musb_channel->transmit);
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_BLACKFIN
|
|
/* Clear DMA interrup flags */
|
|
musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma);
|
|
#endif
|
|
|
|
retval = IRQ_HANDLED;
|
|
done:
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
return retval;
|
|
}
|
|
|
|
void dma_controller_destroy(struct dma_controller *c)
|
|
{
|
|
struct musb_dma_controller *controller = container_of(c,
|
|
struct musb_dma_controller, controller);
|
|
|
|
if (!controller)
|
|
return;
|
|
|
|
if (controller->irq)
|
|
free_irq(controller->irq, c);
|
|
|
|
kfree(controller);
|
|
}
|
|
|
|
struct dma_controller *__init
|
|
dma_controller_create(struct musb *musb, void __iomem *base)
|
|
{
|
|
struct musb_dma_controller *controller;
|
|
struct device *dev = musb->controller;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
int irq = platform_get_irq(pdev, 1);
|
|
|
|
if (irq == 0) {
|
|
dev_err(dev, "No DMA interrupt line!\n");
|
|
return NULL;
|
|
}
|
|
|
|
controller = kzalloc(sizeof(*controller), GFP_KERNEL);
|
|
if (!controller)
|
|
return NULL;
|
|
|
|
controller->channel_count = MUSB_HSDMA_CHANNELS;
|
|
controller->private_data = musb;
|
|
controller->base = base;
|
|
|
|
controller->controller.start = dma_controller_start;
|
|
controller->controller.stop = dma_controller_stop;
|
|
controller->controller.channel_alloc = dma_channel_allocate;
|
|
controller->controller.channel_release = dma_channel_release;
|
|
controller->controller.channel_program = dma_channel_program;
|
|
controller->controller.channel_abort = dma_channel_abort;
|
|
|
|
if (request_irq(irq, dma_controller_irq, IRQF_DISABLED,
|
|
dev_name(musb->controller), &controller->controller)) {
|
|
dev_err(dev, "request_irq %d failed!\n", irq);
|
|
dma_controller_destroy(&controller->controller);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
controller->irq = irq;
|
|
|
|
return &controller->controller;
|
|
}
|