mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-28 20:37:27 +00:00
eaad2db03c
This patch adds support for a low(er)-power suspend-to-RAM. In addition to the SDRAM being put into self-refresh mode, the Master Clock is set to the Slow-clock rate (32Khz) and PLLA & PLLB are disabled. Certain peripherals are therefore also disabled, and thus cannot be used as wakeup sources. This patch has been included in the AT91 patches in various forms since 2.6.19 and a number of people have worked or commented on it, most notably: Savin Zlobec (for the original AT91RM9200 support) Anti Sullin (for the SAM9260 version) David Brownell, etc. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
73 lines
2.4 KiB
Makefile
73 lines
2.4 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
obj-y := irq.o gpio.o
|
|
obj-m :=
|
|
obj-n :=
|
|
obj- :=
|
|
|
|
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
|
|
|
|
# CPU-specific support
|
|
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
|
|
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
|
|
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
|
|
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
|
|
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
|
|
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
|
|
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o
|
|
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
|
|
|
|
# AT91RM9200 board-specific support
|
|
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
|
|
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
|
|
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
|
|
obj-$(CONFIG_MACH_CSB337) += board-csb337.o
|
|
obj-$(CONFIG_MACH_CSB637) += board-csb637.o
|
|
obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
|
|
obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
|
|
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
|
|
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
|
|
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
|
|
obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
|
|
obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
|
|
|
|
# AT91SAM9260 board-specific support
|
|
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
|
|
obj-$(CONFIG_MACH_CAM60) += board-cam60.o
|
|
obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
|
|
obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
|
|
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
|
|
obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
|
|
|
|
# AT91SAM9261 board-specific support
|
|
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
|
|
|
|
# AT91SAM9263 board-specific support
|
|
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
|
|
obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o
|
|
|
|
# AT91SAM9RL board-specific support
|
|
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
|
|
|
|
# AT91SAM9G20 board-specific support
|
|
obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
|
|
|
|
# AT91CAP9 board-specific support
|
|
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
|
|
|
|
# AT91X40 board-specific support
|
|
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
|
|
|
|
# Drivers
|
|
obj-y += leds.o
|
|
|
|
# Power Management
|
|
obj-$(CONFIG_PM) += pm.o
|
|
obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
|
|
|
|
ifeq ($(CONFIG_PM_DEBUG),y)
|
|
CFLAGS_pm.o += -DDEBUG
|
|
endif
|