linux/arch/mn10300/kernel
Mark Salter 8d160027ff MN10300: fix serial port vdma irq setup for SMP
The builtin SoC serial ports have no FIFOs and use a virtual DMA mechanism
based on high priority IRQs to avoid overruns. These high priority interrupts
are pinned to cpu#0 on SMP systems. This patch fixes a problem with SMP where
the set_intr_level() interface is used to set the priority for these IRQs. The
set_intr_level() function sets priority on the local cpu but on SMP systems,
this code may be run on some other cpu than the one handling the interrupts.
Instead of setting interrupt level explicitly, this patch uses a special
irq_chip for these interrupts so that the mask/unmask methods can set the
interrupt level implicitly.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2012-12-12 15:46:14 +00:00
..
asm-offsets.c MN10300: Save frame pointer in thread_info struct rather than global var 2010-10-27 17:29:01 +01:00
cevt-mn10300.c mn10300: move setup_jiffies_interrupt() to cevt-mn10300.c 2012-07-11 16:04:41 -07:00
csrc-mn10300.c MN10300: Use clocksource_register_hz() 2011-03-18 16:52:50 +00:00
entry.S mn10300: switch to saner kernel_execve() semantics 2012-10-14 19:43:21 -04:00
fpu-low.S MN10300: Make the FPU operate in non-lazy mode under SMP 2010-10-27 17:28:52 +01:00
fpu-nofpu-low.S MN10300: Make the FPU operate in non-lazy mode under SMP 2010-10-27 17:28:52 +01:00
fpu-nofpu.c MN10300: Make the FPU operate in non-lazy mode under SMP 2010-10-27 17:28:52 +01:00
fpu.c Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
gdb-io-serial-low.S MN10300: And Panasonic AM34 subarch and implement SMP 2010-10-27 17:28:55 +01:00
gdb-io-serial.c Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
gdb-io-ttysm-low.S
gdb-io-ttysm.c Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
gdb-low.S
gdb-stub.c Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
head.S MN10300: And Panasonic AM34 subarch and implement SMP 2010-10-27 17:28:55 +01:00
internal.h mn10300: split ret_from_fork, simplify kernel_thread() 2012-10-01 00:53:24 -04:00
io.c
irq.c MN10300: cleanup IRQ affinity setting 2012-12-12 15:46:14 +00:00
kgdb.c mn10300: Use common threadinfo allocator 2012-05-08 14:08:45 +02:00
kprobes.c MN10300: Allow some cacheflushes to be avoided if cache snooping is available 2010-10-27 17:28:46 +01:00
Makefile mn10300: switch to generic kernel_execve() 2012-10-01 00:53:59 -04:00
mn10300_ksyms.c
mn10300-debug.c
mn10300-serial-low.S MN10300: And Panasonic AM34 subarch and implement SMP 2010-10-27 17:28:55 +01:00
mn10300-serial.c MN10300: fix serial port vdma irq setup for SMP 2012-12-12 15:46:14 +00:00
mn10300-serial.h
mn10300-watchdog-low.S MN10300: And Panasonic AM34 subarch and implement SMP 2010-10-27 17:28:55 +01:00
mn10300-watchdog.c Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
module.c modules: make arch's use default loader hooks 2011-07-24 22:06:04 +09:30
process.c flagday: don't pass regs to copy_thread() 2012-11-28 23:43:42 -05:00
profile-low.S
profile.c MN10300: And Panasonic AM34 subarch and implement SMP 2010-10-27 17:28:55 +01:00
ptrace.c Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
rtc.c set_rtc_mmss: show warning message only once 2011-01-13 08:03:07 -08:00
setup.c Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
sigframe.h
signal.c mn10300: don't bother with SIGTRAP in setup_frame() 2012-10-01 09:58:16 -04:00
smp-low.S Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
smp.c MN10300: cleanup IRQ affinity setting 2012-12-12 15:46:14 +00:00
switch_to.S MN10300: Emulate single stepping in KGDB on MN10300 2011-03-18 16:54:32 +00:00
sys_mn10300.c
time.c MN10300: Use clockevents_calc_mult_shift() 2011-03-18 16:52:50 +00:00
traps.c mn10300: kernel/traps.c needs <linux/export.h> 2012-07-11 16:04:42 -07:00
vmlinux.lds.S MN10300: Add missing _sdata declaration 2011-06-07 19:03:53 -07:00