mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-25 19:07:46 +00:00
48f1d5a3ce
This is a number of basic fixes to the PB1176 that makes it tick properly: - Detect MMC insertion/removal even when PL061 GPIO is not compiled in. The register to read this status directly is removed on the PB1176. - Define the UART3 on the DevChip (where is actually is) and define the new UART4 serial port on the FPGA. - Also define the clocks for these two UARTs apropriately. - Remove the false notion that the PB1176 should have its CLCD on the ISSP, this is not the case, it is in the DevChip. - Remove the defintions and the previously commented-out PL081 DMAC. As confirmed by mail this was found to be broken on the PB1176 board and removed from the subsequent FPGA images. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
83 lines
3.6 KiB
C
83 lines
3.6 KiB
C
/*
|
|
* arch/arm/mach-realview/include/mach/board-pb1176.h
|
|
*
|
|
* Copyright (C) 2008 ARM Limited
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301, USA.
|
|
*/
|
|
|
|
#ifndef __ASM_ARCH_BOARD_PB1176_H
|
|
#define __ASM_ARCH_BOARD_PB1176_H
|
|
|
|
#include <mach/platform.h>
|
|
|
|
/*
|
|
* Peripheral addresses
|
|
*/
|
|
#define REALVIEW_PB1176_UART4_BASE 0x10009000 /* UART 4 */
|
|
#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */
|
|
#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */
|
|
#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */
|
|
#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
|
|
#define REALVIEW_PB1176_FLASH_BASE 0x30000000
|
|
#define REALVIEW_PB1176_FLASH_SIZE SZ_64M
|
|
#define REALVIEW_PB1176_SEC_FLASH_BASE 0x3C000000 /* Secure flash */
|
|
#define REALVIEW_PB1176_SEC_FLASH_SIZE SZ_64M
|
|
|
|
#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */
|
|
#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */
|
|
#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */
|
|
#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */
|
|
#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */
|
|
#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */
|
|
#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */
|
|
#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */
|
|
#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */
|
|
#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */
|
|
#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */
|
|
#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */
|
|
#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */
|
|
#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */
|
|
|
|
/*
|
|
* PCI regions
|
|
*/
|
|
#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */
|
|
#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */
|
|
#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */
|
|
#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */
|
|
#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */
|
|
#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */
|
|
|
|
#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */
|
|
#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */
|
|
#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */
|
|
#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */
|
|
#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */
|
|
#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */
|
|
|
|
#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */
|
|
#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */
|
|
#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */
|
|
#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */
|
|
#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
|
|
|
|
/*
|
|
* Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
|
|
*/
|
|
#define REALVIEW_PB1176_SYS_SOFT_RESET 0x0100
|
|
|
|
#endif /* __ASM_ARCH_BOARD_PB1176_H */
|