mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-14 04:41:26 +00:00
f5e706ad88
With this commit all sparc64 header files are moved to asm-sparc.
The remaining files (71 files) were too different to be trivially
merged so divide them up in a _32.h and a _64.h file which
are both included from the file with no bit size.
The following script were used:
cd include
FILES=`wc -l asm-sparc64/*h | grep -v '^ 1' | cut -b 20-`
for FILE in ${FILES}; do
echo $FILE:
BASE=`echo $FILE | cut -d '.' -f 1`
FN32=${BASE}_32.h
FN64=${BASE}_64.h
GUARD=___ASM_SPARC_`echo $BASE | tr '-' '_' | tr [:lower:] [:upper:]`_H
git mv asm-sparc/$FILE asm-sparc/$FN32
git mv asm-sparc64/$FILE asm-sparc/$FN64
echo git mv done
printf "#ifndef %s\n" $GUARD > asm-sparc/$FILE
printf "#define %s\n" $GUARD >> asm-sparc/$FILE
printf "#if defined(__sparc__) && defined(__arch64__)\n" >> asm-sparc/$FILE
printf "#include <asm-sparc/%s>\n" $FN64 >> asm-sparc/$FILE
printf "#else\n" >> asm-sparc/$FILE
printf "#include <asm-sparc/%s>\n" $FN32 >> asm-sparc/$FILE
printf "#endif\n" >> asm-sparc/$FILE
printf "#endif\n" >> asm-sparc/$FILE
git add asm-sparc/$FILE
echo new file done
printf "#include <asm-sparc/%s>\n" $FILE > asm-sparc64/$FILE
git add asm-sparc64/$FILE
echo sparc64 file done
done
The guard contains three '_' to avoid conflict with existing guards.
In additing the two Kbuild files are emptied to avoid breaking
headers_* targets.
We will reintroduce the exported header files when the necessary
kbuild changes are merged.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
101 lines
3.2 KiB
C
101 lines
3.2 KiB
C
/*
|
|
* auxio.h: Definitions and code for the Auxiliary I/O registers.
|
|
*
|
|
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
|
|
*
|
|
* Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net)
|
|
*/
|
|
#ifndef _SPARC64_AUXIO_H
|
|
#define _SPARC64_AUXIO_H
|
|
|
|
/* AUXIO implementations:
|
|
* sbus-based NCR89C105 "Slavio"
|
|
* LED/Floppy (AUX1) register
|
|
* Power (AUX2) register
|
|
*
|
|
* ebus-based auxio on PCIO
|
|
* LED Auxio Register
|
|
* Power Auxio Register
|
|
*
|
|
* Register definitions from NCR _NCR89C105 Chip Specification_
|
|
*
|
|
* SLAVIO AUX1 @ 0x1900000
|
|
* -------------------------------------------------
|
|
* | (R) | (R) | D | (R) | E | M | T | L |
|
|
* -------------------------------------------------
|
|
* (R) - bit 7:6,4 are reserved and should be masked in s/w
|
|
* D - Floppy Density Sense (1=high density) R/O
|
|
* E - Link Test Enable, directly reflected on AT&T 7213 LTE pin
|
|
* M - Monitor/Mouse Mux, directly reflected on MON_MSE_MUX pin
|
|
* T - Terminal Count: sends TC pulse to 82077 floppy controller
|
|
* L - System LED on front panel (0=off, 1=on)
|
|
*/
|
|
#define AUXIO_AUX1_MASK 0xc0 /* Mask bits */
|
|
#define AUXIO_AUX1_FDENS 0x20 /* Floppy Density Sense */
|
|
#define AUXIO_AUX1_LTE 0x08 /* Link Test Enable */
|
|
#define AUXIO_AUX1_MMUX 0x04 /* Monitor/Mouse Mux */
|
|
#define AUXIO_AUX1_FTCNT 0x02 /* Terminal Count, */
|
|
#define AUXIO_AUX1_LED 0x01 /* System LED */
|
|
|
|
/* SLAVIO AUX2 @ 0x1910000
|
|
* -------------------------------------------------
|
|
* | (R) | (R) | D | (R) | (R) | (R) | C | F |
|
|
* -------------------------------------------------
|
|
* (R) - bits 7:6,4:2 are reserved and should be masked in s/w
|
|
* D - Power Failure Detect (1=power fail)
|
|
* C - Clear Power Failure Detect Int (1=clear)
|
|
* F - Power Off (1=power off)
|
|
*/
|
|
#define AUXIO_AUX2_MASK 0xdc /* Mask Bits */
|
|
#define AUXIO_AUX2_PFAILDET 0x20 /* Power Fail Detect */
|
|
#define AUXIO_AUX2_PFAILCLR 0x02 /* Clear Pwr Fail Det Intr */
|
|
#define AUXIO_AUX2_PWR_OFF 0x01 /* Power Off */
|
|
|
|
/* Register definitions from Sun Microsystems _PCIO_ p/n 802-7837
|
|
*
|
|
* PCIO LED Auxio @ 0x726000
|
|
* -------------------------------------------------
|
|
* | 31:1 Unused | LED |
|
|
* -------------------------------------------------
|
|
* Bits 31:1 unused
|
|
* LED - System LED on front panel (0=off, 1=on)
|
|
*/
|
|
#define AUXIO_PCIO_LED 0x01 /* System LED */
|
|
|
|
/* PCIO Power Auxio @ 0x724000
|
|
* -------------------------------------------------
|
|
* | 31:2 Unused | CPO | SPO |
|
|
* -------------------------------------------------
|
|
* Bits 31:2 unused
|
|
* CPO - Courtesy Power Off (1=off)
|
|
* SPO - System Power Off (1=off)
|
|
*/
|
|
#define AUXIO_PCIO_CPWR_OFF 0x02 /* Courtesy Power Off */
|
|
#define AUXIO_PCIO_SPWR_OFF 0x01 /* System Power Off */
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
extern void __iomem *auxio_register;
|
|
|
|
#define AUXIO_LTE_ON 1
|
|
#define AUXIO_LTE_OFF 0
|
|
|
|
/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
|
|
*
|
|
* on - AUXIO_LTE_ON or AUXIO_LTE_OFF
|
|
*/
|
|
extern void auxio_set_lte(int on);
|
|
|
|
#define AUXIO_LED_ON 1
|
|
#define AUXIO_LED_OFF 0
|
|
|
|
/* auxio_set_led - Set system front panel LED
|
|
*
|
|
* on - AUXIO_LED_ON or AUXIO_LED_OFF
|
|
*/
|
|
extern void auxio_set_led(int on);
|
|
|
|
#endif /* ifndef __ASSEMBLY__ */
|
|
|
|
#endif /* !(_SPARC64_AUXIO_H) */
|