FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2025-01-05 17:01:17 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
934a3595b3
linux/arch/ppc/platforms/85xx/stx_gp3.c
Kumar Gala 7e78e5e502 [PATCH] powerpc: Updated platforms that use gianfar to match driver 
The gianfar driver changed how it required MDIO bus and phy id's
to be passed to it.  Also, it no longer passes the physical address
of the MDIO bus.  Instead we have a proper platform device.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 21:16:18 +11:00

344 lines
8.3 KiB
C
Raw Blame History

/*
* arch/ppc/platforms/85xx/stx_gp3.c
*
* STx GP3 board specific routines
*
* Dan Malek <dan@embeddededge.com>
* Copyright 2004 Embedded Edge, LLC
*
* Copied from mpc8560_ads.c
* Copyright 2002, 2003 Motorola Inc.
*
* Ported to 2.6, Matt Porter <mporter@kernel.crashing.org>
* Copyright 2004-2005 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/root_dev.h>
#include <linux/seq_file.h>
#include <linux/serial.h>
#include <linux/initrd.h>
#include <linux/module.h>
#include <linux/fsl_devices.h>
#include <linux/interrupt.h>
#include <linux/rio.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/open_pic.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
#include <asm/irq.h>
#include <asm/immap_85xx.h>
#include <asm/cpm2.h>
#include <asm/mpc85xx.h>
#include <asm/ppc_sys.h>
#include <syslib/cpm2_pic.h>
#include <syslib/ppc85xx_common.h>
#include <syslib/ppc85xx_rio.h>
unsigned char __res[sizeof(bd_t)];
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
unsigned long pci_dram_offset = 0;
#endif
/* Internal interrupts are all Level Sensitive, and Positive Polarity */
static u8 gp3_openpic_initsenses[] __initdata = {
MPC85XX_INTERNAL_IRQ_SENSES,
0x0, /* External 0: */
#if defined(CONFIG_PCI)
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 3 */
#else
0x0, /* External 1: */
0x0, /* External 2: */
0x0, /* External 3: */
0x0, /* External 4: */
#endif
0x0, /* External 5: */
0x0, /* External 6: */
0x0, /* External 7: */
0x0, /* External 8: */
0x0, /* External 9: */
0x0, /* External 10: */
0x0, /* External 11: */
};
/*
* Setup the architecture
*/
static void __init
gp3_setup_arch(void)
{
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
struct gianfar_mdio_data *mdata;
cpm2_reset();
/* get the core frequency */
freq = binfo->bi_intfreq;
if (ppc_md.progress)
ppc_md.progress("gp3_setup_arch()", 0);
/* Set loops_per_jiffy to a half-way reasonable value,
for use until calibrate_delay gets called. */
loops_per_jiffy = freq / HZ;
#ifdef CONFIG_PCI
/* setup PCI host bridges */
mpc85xx_setup_hose();
#endif
/* setup the board related info for the MDIO bus */
mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
mdata->irq[2] = MPC85xx_IRQ_EXT5;
mdata->irq[4] = MPC85xx_IRQ_EXT5;
mdata->irq[31] = -1;
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
if (pdata) {
/* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
pdata->bus_id = 0;
pdata->phy_id = 2;
memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
}
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
if (pdata) {
/* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
pdata->bus_id = 0;
pdata->phy_id = 4;
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
printk ("bi_immr_base = %8.8lx\n", binfo->bi_immr_base);
}
static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
{
while ((irq = cpm2_get_irq(regs)) >= 0)
__do_IRQ(irq, regs);
return IRQ_HANDLED;
}
static struct irqaction cpm2_irqaction = {
.handler = cpm2_cascade,
.flags = SA_INTERRUPT,
.mask = CPU_MASK_NONE,
.name = "cpm2_cascade",
};
static void __init
gp3_init_IRQ(void)
{
bd_t *binfo = (bd_t *) __res;
/*
* Setup OpenPIC
*/
/* Determine the Physical Address of the OpenPIC regs */
phys_addr_t OpenPIC_PAddr =
binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
OpenPIC_InitSenses = gp3_openpic_initsenses;
OpenPIC_NumInitSenses = sizeof (gp3_openpic_initsenses);
/* Skip reserved space and internal sources */
openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
/* Map PIC IRQs 0-11 */
openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
/*
* Let openpic interrupts starting from an offset, to
* leave space for cascading interrupts underneath.
*/
openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
/* Setup CPM2 PIC */
cpm2_init_IRQ();
setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
return;
}
static int
gp3_show_cpuinfo(struct seq_file *m)
{
uint pvid, svid, phid1;
bd_t *binfo = (bd_t *) __res;
uint memsize;
unsigned int freq;
extern unsigned long total_memory; /* in mm/init */
/* get the core frequency */
freq = binfo->bi_intfreq;
pvid = mfspr(SPRN_PVR);
svid = mfspr(SPRN_SVR);
memsize = total_memory;
seq_printf(m, "Vendor\t\t: RPC Electronics STx \n");
seq_printf(m, "Machine\t\t: GP3 - MPC%s\n", cur_ppc_sys_spec->ppc_sys_name);
seq_printf(m, "bus freq\t: %u.%.6u MHz\n", freq / 1000000,
freq % 1000000);
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
/* Display cpu Pll setting */
phid1 = mfspr(SPRN_HID1);
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
/* Display the amount of memory */
seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
return 0;
}
#ifdef CONFIG_PCI
int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel,
unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{PIRQA, PIRQB, PIRQC, PIRQD},
{PIRQD, PIRQA, PIRQB, PIRQC},
{PIRQC, PIRQD, PIRQA, PIRQB},
{PIRQB, PIRQC, PIRQD, PIRQA},
};
const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
int mpc85xx_exclude_device(u_char bus, u_char devfn)
{
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
else
return PCIBIOS_SUCCESSFUL;
}
#endif /* CONFIG_PCI */
#ifdef CONFIG_RAPIDIO
void
platform_rio_init(void)
{
/*
* The STx firmware configures the RapidIO Local Access Window
* at 0xc0000000 with a size of 512MB.
*/
mpc85xx_rio_setup(0xc0000000, 0x20000000);
}
#endif /* CONFIG_RAPIDIO */
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
/* parse_bootinfo must always be called first */
parse_bootinfo(find_bootinfo());
/*
* If we were passed in a board information, copy it into the
* residual data area.
*/
if (r3) {
memcpy((void *) __res, (void *) (r3 + KERNELBASE),
sizeof (bd_t));
}
#if defined(CONFIG_BLK_DEV_INITRD)
/*
* If the init RAM disk has been configured in, and there's a valid
* starting address for it, set it up.
*/
if (r4) {
initrd_start = r4 + KERNELBASE;
initrd_end = r5 + KERNELBASE;
}
#endif /* CONFIG_BLK_DEV_INITRD */
/* Copy the kernel command line arguments to a safe place. */
if (r6) {
*(char *) (r7 + KERNELBASE) = 0;
strcpy(cmd_line, (char *) (r6 + KERNELBASE));
}
identify_ppc_sys_by_id(mfspr(SPRN_SVR));
/* setup the PowerPC module struct */
ppc_md.setup_arch = gp3_setup_arch;
ppc_md.show_cpuinfo = gp3_show_cpuinfo;
ppc_md.init_IRQ = gp3_init_IRQ;
ppc_md.get_irq = openpic_get_irq;
ppc_md.restart = mpc85xx_restart;
ppc_md.power_off = mpc85xx_power_off;
ppc_md.halt = mpc85xx_halt;
ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
if (ppc_md.progress)
ppc_md.progress("platform_init(): exit", 0);
return;
}
Reference in New Issue View Git Blame Copy Permalink