mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-15 13:22:55 +00:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
163 lines
6.1 KiB
C
163 lines
6.1 KiB
C
/* $Id: aztcd.h,v 2.60 1997/11/29 09:51:22 root Exp root $
|
|
*
|
|
* Definitions for a AztechCD268 CD-ROM interface
|
|
* Copyright (C) 1994-98 Werner Zimmermann
|
|
*
|
|
* based on Mitsumi CDROM driver by Martin Harriss
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* History: W.Zimmermann adaption to Aztech CD268-01A Version 1.3
|
|
* October 1994 Email: Werner.Zimmermann@fht-esslingen.de
|
|
*/
|
|
|
|
/* *** change this to set the I/O port address of your CD-ROM drive,
|
|
set to '-1', if you want autoprobing */
|
|
#define AZT_BASE_ADDR -1
|
|
|
|
/* list of autoprobing addresses (not more than 15), last value must be 0x000
|
|
Note: Autoprobing is only enabled, if AZT_BASE_ADDR is set to '-1' ! */
|
|
#define AZT_BASE_AUTO { 0x320, 0x300, 0x310, 0x330, 0x000 }
|
|
|
|
/* Uncomment this, if your CDROM is connected to a Soundwave32-soundcard
|
|
and configure AZT_BASE_ADDR and AZT_SW32_BASE_ADDR */
|
|
/*#define AZT_SW32 1
|
|
*/
|
|
|
|
#ifdef AZT_SW32
|
|
#define AZT_SW32_BASE_ADDR 0x220 /*I/O port base address of your soundcard*/
|
|
#endif
|
|
|
|
/* Set this to 1, if you want your tray to be locked, set to 0 to prevent tray
|
|
from locking */
|
|
#define AZT_ALLOW_TRAY_LOCK 1
|
|
|
|
/*Set this to 1 to allow auto-eject when unmounting a disk, set to 0, if you
|
|
don't want the auto-eject feature*/
|
|
#define AZT_AUTO_EJECT 0
|
|
|
|
/*Set this to 1, if you want to use incompatible ioctls for reading in raw and
|
|
cooked mode */
|
|
#define AZT_PRIVATE_IOCTLS 1
|
|
|
|
/*Set this to 1, if you want multisession support by the ISO fs. Even if you set
|
|
this value to '0' you can use multisession CDs. In that case the drive's firm-
|
|
ware will do the appropriate redirection automatically. The CD will then look
|
|
like a single session CD (but nevertheless all data may be read). Please read
|
|
chapter '5.1 Multisession support' in README.aztcd for details. Normally it's
|
|
uncritical to leave this setting untouched */
|
|
#define AZT_MULTISESSION 1
|
|
|
|
/*Uncomment this, if you are using a linux kernel version prior to 2.1.0 */
|
|
/*#define AZT_KERNEL_PRIOR_2_1 */
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/*-----nothing to be configured for normal applications below this line------*/
|
|
|
|
|
|
/* Increase this if you get lots of timeouts; if you get kernel panic, replace
|
|
STEN_LOW_WAIT by STEN_LOW in the source code */
|
|
#define AZT_STATUS_DELAY 400 /*for timer wait, STEN_LOW_WAIT*/
|
|
#define AZT_TIMEOUT 8000000 /*for busy wait STEN_LOW, DTEN_LOW*/
|
|
#define AZT_FAST_TIMEOUT 10000 /*for reading the version string*/
|
|
|
|
/* number of times to retry a command before giving up */
|
|
#define AZT_RETRY_ATTEMPTS 3
|
|
|
|
/* port access macros */
|
|
#define CMD_PORT azt_port
|
|
#define DATA_PORT azt_port
|
|
#define STATUS_PORT azt_port+1
|
|
#define MODE_PORT azt_port+2
|
|
#ifdef AZT_SW32
|
|
#define AZT_SW32_INIT (unsigned int) (0xFF00 & (AZT_BASE_ADDR*16))
|
|
#define AZT_SW32_CONFIG_REG AZT_SW32_BASE_ADDR+0x16 /*Soundwave32 Config. Register*/
|
|
#define AZT_SW32_ID_REG AZT_SW32_BASE_ADDR+0x04 /*Soundwave32 ID Version Register*/
|
|
#endif
|
|
|
|
/* status bits */
|
|
#define AST_CMD_CHECK 0x80 /* 1 = command error */
|
|
#define AST_DOOR_OPEN 0x40 /* 1 = door is open */
|
|
#define AST_NOT_READY 0x20 /* 1 = no disk in the drive */
|
|
#define AST_DSK_CHG 0x02 /* 1 = disk removed or changed */
|
|
#define AST_MODE 0x01 /* 0=MODE1, 1=MODE2 */
|
|
#define AST_MODE_BITS 0x1C /* Mode Bits */
|
|
#define AST_INITIAL 0x0C /* initial, only valid ... */
|
|
#define AST_BUSY 0x04 /* now playing, only valid
|
|
in combination with mode
|
|
bits */
|
|
/* flag bits */
|
|
#define AFL_DATA 0x02 /* data available if low */
|
|
#define AFL_STATUS 0x04 /* status available if low */
|
|
#define AFL_OP_OK 0x01 /* OP_OK command correct*/
|
|
#define AFL_PA_OK 0x02 /* PA_OK parameter correct*/
|
|
#define AFL_OP_ERR 0x05 /* error in command*/
|
|
#define AFL_PA_ERR 0x06 /* error in parameters*/
|
|
#define POLLED 0x04 /* polled mode */
|
|
|
|
/* commands */
|
|
#define ACMD_SOFT_RESET 0x10 /* reset drive */
|
|
#define ACMD_PLAY_READ 0x20 /* read data track in cooked mode */
|
|
#define ACMD_PLAY_READ_RAW 0x21 /* reading in raw mode*/
|
|
#define ACMD_SEEK 0x30 /* seek msf address*/
|
|
#define ACMD_SEEK_TO_LEADIN 0x31 /* seek to leadin track*/
|
|
#define ACMD_GET_ERROR 0x40 /* get error code */
|
|
#define ACMD_GET_STATUS 0x41 /* get status */
|
|
#define ACMD_GET_Q_CHANNEL 0x50 /* read info from q channel */
|
|
#define ACMD_EJECT 0x60 /* eject/open tray */
|
|
#define ACMD_CLOSE 0x61 /* close tray */
|
|
#define ACMD_LOCK 0x71 /* lock tray closed */
|
|
#define ACMD_UNLOCK 0x72 /* unlock tray */
|
|
#define ACMD_PAUSE 0x80 /* pause */
|
|
#define ACMD_STOP 0x81 /* stop play */
|
|
#define ACMD_PLAY_AUDIO 0x90 /* play audio track */
|
|
#define ACMD_SET_VOLUME 0x93 /* set audio level */
|
|
#define ACMD_GET_VERSION 0xA0 /* get firmware version */
|
|
#define ACMD_SET_DISK_TYPE 0xA1 /* set disk data mode */
|
|
|
|
#define MAX_TRACKS 104
|
|
|
|
struct msf {
|
|
unsigned char min;
|
|
unsigned char sec;
|
|
unsigned char frame;
|
|
};
|
|
|
|
struct azt_Play_msf {
|
|
struct msf start;
|
|
struct msf end;
|
|
};
|
|
|
|
struct azt_DiskInfo {
|
|
unsigned char first;
|
|
unsigned char next;
|
|
unsigned char last;
|
|
struct msf diskLength;
|
|
struct msf firstTrack;
|
|
unsigned char multi;
|
|
struct msf nextSession;
|
|
struct msf lastSession;
|
|
unsigned char xa;
|
|
unsigned char audio;
|
|
};
|
|
|
|
struct azt_Toc {
|
|
unsigned char ctrl_addr;
|
|
unsigned char track;
|
|
unsigned char pointIndex;
|
|
struct msf trackTime;
|
|
struct msf diskTime;
|
|
};
|