linux

mirror of https://github.com/FEX-Emu/linux.git synced 2025-02-13 16:11:54 +00:00

History

Zhicheng Fan 950740098c powerpc/85xx: Add dts for p1020rdb-pc board

P1020RDB-PC Overview
------------------
1Gbyte DDR3 SDRAM
32 Mbyte NAND flash
10 16Mbyte NOR flash
16 Mbyte SPI flash
SD connector to interface with the SD memory card
Real-time clock on I2C bus

PCIe:
- x1 PCIe slot
- x1 mini-PCIe slot

10/100/1000 BaseT Ethernet ports:
- eTSEC1, RGMII: one 10/100/1000 port using VitesseTM VSC7385 L2 switch
- eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221
- eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021

USB 2.0 port:
- Two USB2.0 Type A receptacles
- One USB2.0 signal to Mini PCIe slot

Dual RJ45 UART ports:
- DUART interface: supports two UARTs up to 115200 bps for console display

Signed-off-by: Zhicheng Fan <b32736@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2012-03-16 11:03:44 -05:00

dts

powerpc/85xx: Add dts for p1020rdb-pc board

2012-03-16 11:03:44 -05:00

.gitignore

dtc/powerpc: remove obsolete .gitignore entries

2011-06-08 18:51:18 -06:00

4xx.c

powerpc/44x: Fix UART clocks on 440SPe

2010-05-12 07:48:49 -04:00

4xx.h

powerpc/405ex: provide necessary fixup function to support cuImage

2009-08-31 09:20:55 -04:00

44x.h

[POWERPC] cuimage for Bamboo board

2007-09-19 21:13:16 -05:00

addnote.c

powerpc: Use static const char arrays

2010-10-13 16:19:03 +11:00

bamboo.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cpm-serial.c

[POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.

2008-04-17 01:01:37 -05:00

crt0.S

powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN

2011-04-20 16:59:20 +10:00

crtsavres.S

[POWERPC] Fix bootwrapper builds with newer gcc versions

2008-06-16 15:00:52 +10:00

cuboot-8xx.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

cuboot-52xx.c

powerpc/52xx: Make cuImage more robust in locating immr node.

2008-10-15 11:09:59 -06:00

cuboot-83xx.c

[POWERPC] bootwrapper: convert cuboot-8{3,5}xx to dt_fixup_mac_address_by_alias

2008-01-23 19:32:47 -06:00

cuboot-85xx-cpm2.c

[POWERPC] Add a cuboot wrapper for 85xx with CPM2

2008-01-27 14:10:36 -06:00

cuboot-85xx.c

powerpc/85xx: cuboot - Fix up ethernet3 MAC address on MPC85xx

2009-06-15 21:45:32 -05:00

cuboot-824x.c

[POWERPC] Add initial iomega StorCenter board port.

2008-01-23 19:54:36 -06:00

cuboot-acadia.c

powerpc/40x: Add cuboot wrapper for Acadia board

2008-10-17 10:31:19 -04:00

cuboot-amigaone.c

powerpc/amigaone: Bootwrapper and serial console support for AmigaOne

2009-02-11 16:00:09 +11:00

cuboot-bamboo.c

[POWERPC] 4xx: Use correct board info structure in cuboot wrappers

2008-02-28 08:16:27 -06:00

cuboot-c2k.c

powerpc: Boot code for the C2K

2008-06-09 13:42:25 +10:00

cuboot-ebony.c

[POWERPC] 4xx: Use correct board info structure in cuboot wrappers

2008-02-28 08:16:27 -06:00

cuboot-hotfoot.c

powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC

2009-08-31 09:15:51 -04:00

cuboot-katmai.c

[POWERPC] 4xx: Use correct board info structure in cuboot wrappers

2008-02-28 08:16:27 -06:00

cuboot-kilauea.c

powerpc/405ex: support cuImage via included dtb

2009-08-31 09:23:22 -04:00

cuboot-mpc7448hpc2.c

[POWERPC] bootwrapper: Build multiple cuImages

2008-02-07 11:40:19 +11:00

cuboot-pq2.c

[POWERPC] cuboot-pq2: PCI fixes

2008-04-17 01:01:40 -05:00

cuboot-rainier.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cuboot-sam440ep.c

powerpc/4xx: Sam440ep support

2008-06-11 08:32:49 -04:00

cuboot-sequoia.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cuboot-taishan.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

cuboot-warp.c

powerpc/44x: Warp patches for the new NDFC driver

2009-01-20 08:17:21 -05:00

cuboot-yosemite.c

[POWERPC] 4xx: Add bootwrapper for AMCC Yosemite board

2008-03-26 07:19:17 -05:00

cuboot.c

[POWERPC] bootwrapper: Move linker symbols into ops.h

2007-08-22 15:27:28 +10:00

cuboot.h

[POWERPC] Consolidate cuboot initialization code

2007-06-14 22:30:16 +10:00

dcr.h

powerpc/boot: Add mfdcrx

2011-12-09 07:49:50 -05:00

devtree.c

powerpc/bootwrapper: Use the child-bus #address-cells to decide which range entry to use

2008-12-21 14:21:17 +11:00

div64.S

powerpc/boot: Add extended precision shifts to the boot wrapper.

2011-12-09 07:49:27 -05:00

dummy.c

powerpc/32: Generate miboot images with ARCH=powerpc

2006-01-15 13:00:08 +11:00

ebony.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

elf_util.c

powerpc: Make the 64-bit kernel as a position-independent executable

2008-09-15 11:08:38 -07:00

elf.h

[POWERPC] Move bootwrapper ELF parsing routines to a file

2007-04-13 03:55:16 +10:00

ep88xc.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

ep405.c

[POWERPC] 4xx: EP405 boards support for arch/powerpc

2007-12-23 13:13:14 -06:00

ep8248e.c

[POWERPC] 82xx: Embedded Planet EP8248E support

2008-01-23 19:34:43 -06:00

epapr.c

powerpc/boot: Add an ePAPR compliant boot wrapper

2011-04-20 16:59:21 +10:00

fixed-head.S

[POWERPC] 8xx/wrapper: Embedded Planet EP88xC support

2007-10-04 11:02:40 -05:00

flatdevtree_env.h

Fix file references in documentation and Kconfig

2008-01-22 10:43:36 -08:00

fsl-soc.c

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

fsl-soc.h

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

gamecube-head.S

powerpc: gamecube: bootwrapper bits

2009-12-12 22:24:26 -07:00

gamecube.c

powerpc: gamecube: bootwrapper bits

2009-12-12 22:24:26 -07:00

gunzip_util.c

[POWERPC] boot: Simplify gunzip_finish

2007-10-03 11:48:43 +10:00

gunzip_util.h

[POWERPC] Add documentation for the zImage's gunzip convenience functions

2007-03-16 16:38:19 +11:00

hack-coff.c

powerpc: Make COFF zImages for old 32-bit powermacs

2006-01-14 15:04:06 +11:00

holly.c

[POWERPC] Use embedded libfdt in the bootwrapper

2007-12-11 13:46:14 +11:00

install.sh

kbuild: use INSTALLKERNEL to select customized installkernel script

2009-09-20 12:18:14 +02:00

io.h

powerpc: Move include files to arch/powerpc/include/asm

2008-08-04 12:02:00 +10:00

libfdt_env.h

powerpc: Update in-kernel dtc and libfdt to version 1.2.0

2008-08-20 16:34:58 +10:00

libfdt-wrapper.c

powerpc/boot: Allocate more memory for dtb

2008-11-06 09:49:43 +11:00

main.c

powerpc: Fix format string warning in arch/powerpc/boot/main.c

2008-10-31 20:14:19 +11:00

Makefile

Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild

2012-01-16 14:34:54 -08:00

mktree.c

powerpc: use consistent types in mktree

2009-08-20 10:29:30 +10:00

mpc8xx.c

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

mpc8xx.h

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

mpc52xx-psc.c

[POWERPC] Add bootwrapper function to get virtual reg from the device tree.

2008-04-17 01:01:37 -05:00

mpsc.c

[POWERPC] prpmc2800: Clean up dts properties

2008-04-15 21:21:24 +10:00

mv64x60_i2c.c

[POWERPC] mv64x60: Remove device tree absolute path references

2008-04-15 21:21:24 +10:00

mv64x60.c

[POWERPC] mv64x60: Remove device tree absolute path references

2008-04-15 21:21:24 +10:00

mv64x60.h

[POWERPC] Add bootwrapper support for Marvell/mv64x60 hostbridge

2007-05-12 11:32:49 +10:00

ns16550.c

[POWERPC] Xilinx: boot support for Xilinx uart 16550.

2008-04-24 13:32:46 -05:00

of.c

[POWERPC] bootwrapper: Move linker symbols into ops.h

2007-08-22 15:27:28 +10:00

of.h

[POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms

2007-06-28 19:19:28 +10:00

ofconsole.c

[POWERPC] Make more OF-related bootwrapper functions available to non-OF platforms

2007-06-28 19:19:28 +10:00

oflib.c

powerpc: Change the default link address for pSeries zImage kernels

2008-07-01 11:28:32 +10:00

ops.h

powerpc: Add del_node() for early boot code to prune inapplicable devices.

2008-10-22 15:01:21 +11:00

page.h

powerpc: Move ppc64 boot wrapper code over to arch/powerpc

2005-11-16 13:52:21 +11:00

planetcore.c

[POWERPC] bootwrapper: Add PlanetCore firmware support

2007-10-03 11:48:43 +10:00

planetcore.h

[POWERPC] bootwrapper: Add PlanetCore firmware support

2007-10-03 11:48:43 +10:00

ppc_asm.h

powerpc: Move ppc64 boot wrapper code over to arch/powerpc

2005-11-16 13:52:21 +11:00

ppcboot-hotfoot.h

powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC

2009-08-31 09:15:51 -04:00

ppcboot.h

[POWERPC] bootwrapper: Add TARGET_HAS_ETHn tests to ppcboot.h

2007-08-22 15:21:48 +10:00

pq2.c

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

pq2.h

[POWERPC] bootwrapper: Add fsl_get_immr() and 8xx/pq2 clock functions.

2007-10-03 20:36:35 -05:00

prpmc2800.c

[POWERPC] mv64x60: Remove device tree absolute path references

2008-04-15 21:21:24 +10:00

ps3-head.S

[POWERPC] PS3: Bootwrapper improvements

2008-04-01 20:43:07 +11:00

ps3-hvcall.S

[POWERPC] PS3: Fix bootwrapper hang bug

2008-02-14 22:11:01 +11:00

ps3.c

[POWERPC] PS3: Bootwrapper improvements

2008-04-01 20:43:07 +11:00

README

powerpc: Move ppc64 boot wrapper code over to arch/powerpc

2005-11-16 13:52:21 +11:00

redboot-8xx.c

[POWERPC] 8xx: Analogue & Micro Adder875 board support.

2008-01-23 19:34:40 -06:00

redboot-83xx.c

[POWERPC] 83xx: Add support for Analogue & Micro ASP837E board

2008-06-02 14:44:25 -05:00

redboot.h

[POWERPC] 8xx: Analogue & Micro Adder875 board support.

2008-01-23 19:34:40 -06:00

reg.h

[POWERPC] 4xx: Add mfspr/mtspr inline macros to 4xx bootwrapper

2007-12-23 13:14:22 -06:00

rs6000.h

powerpc: Make COFF zImages for old 32-bit powermacs

2006-01-14 15:04:06 +11:00

serial.c

powerpc/amigaone: Bootwrapper and serial console support for AmigaOne

2009-02-11 16:00:09 +11:00

simple_alloc.c

[POWERPC] bootwrapper: Use `unsigned long' for malloc sizes

2007-04-24 22:06:54 +10:00

simpleboot.c

Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc

2009-05-02 16:52:26 -07:00

stdio.c

[POWERPC] Add u64 printf to bootwrapper

2007-06-28 19:16:48 +10:00

stdio.h

[POWERPC] Add gcc format warnings to zImage printf()

2007-03-26 15:11:20 +10:00

stdlib.c

[POWERPC] bootwrapper: Add strtoull()

2007-09-14 01:33:23 +10:00

stdlib.h

[POWERPC] bootwrapper: Add strtoull()

2007-09-14 01:33:23 +10:00

string.h

[POWERPC] Add memchr() to the bootwrapper

2007-10-12 14:13:44 +10:00

string.S

powerpc: Fix boot wrapper memcmp() called with zero length argument

2008-10-21 15:17:48 +11:00

treeboot-bamboo.c

[POWERPC] cuimage for Bamboo board

2007-09-19 21:13:16 -05:00

treeboot-currituck.c

powerpc/47x: Add support for the new IBM currituck platform

2011-12-09 07:51:40 -05:00

treeboot-ebony.c

[POWERPC] bootwrapper: Move linker symbols into ops.h

2007-08-22 15:27:28 +10:00

treeboot-iss4xx.c

powerpc/44x: boot wrapper: allow kernel to load into non-zero address

2011-07-12 09:34:41 -04:00

treeboot-walnut.c

[POWERPC] Start removing linux,network-index in favour of aliases

2008-03-26 07:19:16 -05:00

types.h

[POWERPC] Add signed types to bootwrapper

2007-06-28 19:16:47 +10:00

uartlite.c

[POWERPC] Uartlite: bootwrapper bug fix, getc loops forever

2007-10-10 09:14:35 -06:00

ugecon.c

powerpc/gamecube/wii: Fix off-by-one error in ugecon/usbgecko_udbg

2009-12-18 15:13:57 +11:00

ugecon.h

powerpc: gamecube/wii: usbgecko bootwrapper console support

2009-12-12 22:24:26 -07:00

util.S

[POWERPC] Add non-OF serial console support

2006-10-23 12:49:19 +10:00

virtex405-head.S

[POWERPC] bootwrapper: Add a firmware-independent simpleboot target.

2008-04-02 20:36:11 -05:00

virtex.c

powerpc/virtex: Fix booting of Xilinx FPGAs with 16550 for 405 and 440

2008-07-04 00:58:59 -06:00

wii-head.S

powerpc: wii: bootwrapper bits

2009-12-12 22:24:29 -07:00

wii.c

wii: bootwrapper: add fixup to calc useable mem2

2009-12-12 22:24:31 -07:00

wrapper

powerpc/boot: Change the WARN to INFO for boot wrapper overlap message

2011-12-21 15:09:25 -05:00

zImage.coff.lds.S

powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN

2011-04-20 16:59:20 +10:00

zImage.lds.S

powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN

2011-04-20 16:59:20 +10:00

zImage.ps3.lds.S

[POWERPC] PS3: Bootwrapper support.

2007-07-10 21:56:40 +10:00

README

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter