mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-30 21:46:31 +00:00
7a623c0390
The EDAC subsystem uses the old struct sysdev approach, creating all nodes using the raw sysfs API. This is bad, as the API is deprecated. As we'll be changing the EDAC API, let's first port the existing code to struct device. There's one drawback on this patch: driver-specific sysfs nodes, used by mpc85xx_edac, amd64_edac and i7core_edac won't be created anymore. While it would be possible to also port the device-specific code, that would mix kobj with struct device, with is not recommended. Also, it is easier and nicer to move the code to the drivers, instead, as the core can get rid of some complex logic that just emulates what the device_add() and device_create_file() already does. The next patches will convert the driver-specific code to use the device-specific calls. Then, the remaining bits of the old sysfs API will be removed. NOTE: a per-MC bus is required, otherwise devices with more than one memory controller will hit a bug like the one below: [ 819.094946] EDAC DEBUG: find_mci_by_dev: find_mci_by_dev() [ 819.094948] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device() idx=1 [ 819.094952] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device(): creating device mc1 [ 819.094967] EDAC DEBUG: edac_create_sysfs_mci_device: edac_create_sysfs_mci_device creating dimm0, located at channel 0 slot 0 [ 819.094984] ------------[ cut here ]------------ [ 819.100142] WARNING: at fs/sysfs/dir.c:481 sysfs_add_one+0xc1/0xf0() [ 819.107282] Hardware name: S2600CP [ 819.111078] sysfs: cannot create duplicate filename '/bus/edac/devices/dimm0' [ 819.119062] Modules linked in: sb_edac(+) edac_core ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc sunrpc binfmt_misc dm_mirror dm_region_hash dm_log vhost_net macvtap macvlan tun kvm microcode pcspkr iTCO_wdt iTCO_vendor_support igb i2c_i801 i2c_core sg ioatdma dca sr_mod cdrom sd_mod crc_t10dif ahci libahci isci libsas libata scsi_transport_sas scsi_mod wmi dm_mod [last unloaded: scsi_wait_scan] [ 819.175748] Pid: 10902, comm: modprobe Not tainted 3.3.0-0.11.el7.v12.2.x86_64 #1 [ 819.184113] Call Trace: [ 819.186868] [<ffffffff8105adaf>] warn_slowpath_common+0x7f/0xc0 [ 819.193573] [<ffffffff8105aea6>] warn_slowpath_fmt+0x46/0x50 [ 819.200000] [<ffffffff811f53d1>] sysfs_add_one+0xc1/0xf0 [ 819.206025] [<ffffffff811f5cf5>] sysfs_do_create_link+0x135/0x220 [ 819.212944] [<ffffffff811f7023>] ? sysfs_create_group+0x13/0x20 [ 819.219656] [<ffffffff811f5df3>] sysfs_create_link+0x13/0x20 [ 819.226109] [<ffffffff813b04f6>] bus_add_device+0xe6/0x1b0 [ 819.232350] [<ffffffff813ae7cb>] device_add+0x2db/0x460 [ 819.238300] [<ffffffffa0325634>] edac_create_dimm_object+0x84/0xf0 [edac_core] [ 819.246460] [<ffffffffa0325e18>] edac_create_sysfs_mci_device+0xe8/0x290 [edac_core] [ 819.255215] [<ffffffffa0322e2a>] edac_mc_add_mc+0x5a/0x2c0 [edac_core] [ 819.262611] [<ffffffffa03412df>] sbridge_register_mci+0x1bc/0x279 [sb_edac] [ 819.270493] [<ffffffffa03417a3>] sbridge_probe+0xef/0x175 [sb_edac] [ 819.277630] [<ffffffff813ba4e8>] ? pm_runtime_enable+0x58/0x90 [ 819.284268] [<ffffffff812f430c>] local_pci_probe+0x5c/0xd0 [ 819.290508] [<ffffffff812f5ba1>] __pci_device_probe+0xf1/0x100 [ 819.297117] [<ffffffff812f5bea>] pci_device_probe+0x3a/0x60 [ 819.303457] [<ffffffff813b1003>] really_probe+0x73/0x270 [ 819.309496] [<ffffffff813b138e>] driver_probe_device+0x4e/0xb0 [ 819.316104] [<ffffffff813b149b>] __driver_attach+0xab/0xb0 [ 819.322337] [<ffffffff813b13f0>] ? driver_probe_device+0xb0/0xb0 [ 819.329151] [<ffffffff813af5d6>] bus_for_each_dev+0x56/0x90 [ 819.335489] [<ffffffff813b0d7e>] driver_attach+0x1e/0x20 [ 819.341534] [<ffffffff813b0980>] bus_add_driver+0x1b0/0x2a0 [ 819.347884] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.353641] [<ffffffff813b19f6>] driver_register+0x76/0x140 [ 819.359980] [<ffffffff8159f18b>] ? printk+0x51/0x53 [ 819.365524] [<ffffffffa0347000>] ? 0xffffffffa0346fff [ 819.371291] [<ffffffff812f5896>] __pci_register_driver+0x56/0xd0 [ 819.378096] [<ffffffffa0347054>] sbridge_init+0x54/0x1000 [sb_edac] [ 819.385231] [<ffffffff8100203f>] do_one_initcall+0x3f/0x170 [ 819.391577] [<ffffffff810bcd2e>] sys_init_module+0xbe/0x230 [ 819.397926] [<ffffffff815bb529>] system_call_fastpath+0x16/0x1b [ 819.404633] ---[ end trace 1654fdd39556689f ]--- This happens because the bus is not being properly initialized. Instead of putting the memory sub-devices inside the memory controller, it is putting everything under the same directory: $ tree /sys/bus/edac/ /sys/bus/edac/ ├── devices │ ├── all_channel_counts -> ../../../devices/system/edac/mc/mc0/all_channel_counts │ ├── csrow0 -> ../../../devices/system/edac/mc/mc0/csrow0 │ ├── csrow1 -> ../../../devices/system/edac/mc/mc0/csrow1 │ ├── csrow2 -> ../../../devices/system/edac/mc/mc0/csrow2 │ ├── dimm0 -> ../../../devices/system/edac/mc/mc0/dimm0 │ ├── dimm1 -> ../../../devices/system/edac/mc/mc0/dimm1 │ ├── dimm3 -> ../../../devices/system/edac/mc/mc0/dimm3 │ ├── dimm6 -> ../../../devices/system/edac/mc/mc0/dimm6 │ ├── inject_addrmatch -> ../../../devices/system/edac/mc/mc0/inject_addrmatch │ ├── mc -> ../../../devices/system/edac/mc │ └── mc0 -> ../../../devices/system/edac/mc/mc0 ├── drivers ├── drivers_autoprobe ├── drivers_probe └── uevent On a multi-memory controller system, the names "csrow%d" and "dimm%d" should be under "mc%d", and not at the main hierarchy level. So, we need to create a per-MC bus, in order to have its own namespace. Reviewed-by: Aristeu Rozanski <arozansk@redhat.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Greg K H <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
83 lines
2.7 KiB
C
83 lines
2.7 KiB
C
|
|
/*
|
|
* edac_module.h
|
|
*
|
|
* For defining functions/data for within the EDAC_CORE module only
|
|
*
|
|
* written by doug thompson <norsk5@xmission.h>
|
|
*/
|
|
|
|
#ifndef __EDAC_MODULE_H__
|
|
#define __EDAC_MODULE_H__
|
|
|
|
#include "edac_core.h"
|
|
|
|
/*
|
|
* INTERNAL EDAC MODULE:
|
|
* EDAC memory controller sysfs create/remove functions
|
|
* and setup/teardown functions
|
|
*
|
|
* edac_mc objects
|
|
*/
|
|
/* on edac_mc_sysfs.c */
|
|
int edac_mc_sysfs_init(void);
|
|
void edac_mc_sysfs_exit(void);
|
|
extern int edac_create_sysfs_mci_device(struct mem_ctl_info *mci);
|
|
extern void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci);
|
|
void edac_unregister_sysfs(struct mem_ctl_info *mci);
|
|
extern int edac_get_log_ue(void);
|
|
extern int edac_get_log_ce(void);
|
|
extern int edac_get_panic_on_ue(void);
|
|
extern int edac_mc_get_log_ue(void);
|
|
extern int edac_mc_get_log_ce(void);
|
|
extern int edac_mc_get_panic_on_ue(void);
|
|
extern int edac_get_poll_msec(void);
|
|
extern int edac_mc_get_poll_msec(void);
|
|
|
|
/* on edac_device.c */
|
|
extern int edac_device_register_sysfs_main_kobj(
|
|
struct edac_device_ctl_info *edac_dev);
|
|
extern void edac_device_unregister_sysfs_main_kobj(
|
|
struct edac_device_ctl_info *edac_dev);
|
|
extern int edac_device_create_sysfs(struct edac_device_ctl_info *edac_dev);
|
|
extern void edac_device_remove_sysfs(struct edac_device_ctl_info *edac_dev);
|
|
|
|
/* edac core workqueue: single CPU mode */
|
|
extern struct workqueue_struct *edac_workqueue;
|
|
extern void edac_device_workq_setup(struct edac_device_ctl_info *edac_dev,
|
|
unsigned msec);
|
|
extern void edac_device_workq_teardown(struct edac_device_ctl_info *edac_dev);
|
|
extern void edac_device_reset_delay_period(struct edac_device_ctl_info
|
|
*edac_dev, unsigned long value);
|
|
extern void edac_mc_reset_delay_period(int value);
|
|
|
|
extern void *edac_align_ptr(void **p, unsigned size, int n_elems);
|
|
|
|
/*
|
|
* EDAC PCI functions
|
|
*/
|
|
#ifdef CONFIG_PCI
|
|
extern void edac_pci_do_parity_check(void);
|
|
extern void edac_pci_clear_parity_errors(void);
|
|
extern int edac_sysfs_pci_setup(void);
|
|
extern void edac_sysfs_pci_teardown(void);
|
|
extern int edac_pci_get_check_errors(void);
|
|
extern int edac_pci_get_poll_msec(void);
|
|
extern void edac_pci_remove_sysfs(struct edac_pci_ctl_info *pci);
|
|
extern void edac_pci_handle_pe(struct edac_pci_ctl_info *pci, const char *msg);
|
|
extern void edac_pci_handle_npe(struct edac_pci_ctl_info *pci,
|
|
const char *msg);
|
|
#else /* CONFIG_PCI */
|
|
/* pre-process these away */
|
|
#define edac_pci_do_parity_check()
|
|
#define edac_pci_clear_parity_errors()
|
|
#define edac_sysfs_pci_setup() (0)
|
|
#define edac_sysfs_pci_teardown()
|
|
#define edac_pci_get_check_errors()
|
|
#define edac_pci_get_poll_msec()
|
|
#define edac_pci_handle_pe()
|
|
#define edac_pci_handle_npe()
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#endif /* __EDAC_MODULE_H__ */
|