mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-17 14:30:00 +00:00
f007cacffc
This changes the writeX family of functions to have a sync instruction before the MMIO store rather than after, because the generally expected behaviour is that the device receiving the MMIO store can be guaranteed to see the effects of any preceding writes to normal memory. To preserve ordering between writeX and readX, and to preserve ordering between preceding stores and the readX, the readX family of functions have had an sync added before the load. Although writeX followed by spin_unlock is not officially guaranteed to keep the writeX inside the spin-locked region unless an mmiowb() is used, there are currently drivers that depend on the previous behaviour on powerpc, which was that the mmiowb wasn't actually required. Therefore we have a per-cpu flag that is set by writeX, cleared by __raw_spin_lock and mmiowb, and tested by __raw_spin_unlock. If it is set, __raw_spin_unlock does a sync and clears it. This changes both 32-bit and 64-bit readX/writeX. 32-bit already has a sync in __raw_spin_unlock (since lwsync doesn't exist on 32-bit), and thus doesn't need the per-cpu flag. Tested on G5 (PPC970) and POWER5. Signed-off-by: Paul Mackerras <paulus@samba.org>
469 lines
15 KiB
C
469 lines
15 KiB
C
#ifndef _ASM_POWERPC_IO_H
|
|
#define _ASM_POWERPC_IO_H
|
|
#ifdef __KERNEL__
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
/* Check of existence of legacy devices */
|
|
extern int check_legacy_ioport(unsigned long base_port);
|
|
|
|
#ifndef CONFIG_PPC64
|
|
#include <asm-ppc/io.h>
|
|
#else
|
|
|
|
#include <linux/compiler.h>
|
|
#include <asm/page.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/paca.h>
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
#include <asm/iseries/iseries_io.h>
|
|
#endif
|
|
#include <asm/synch.h>
|
|
#include <asm/delay.h>
|
|
|
|
#include <asm-generic/iomap.h>
|
|
|
|
#define __ide_mm_insw(p, a, c) _insw_ns((volatile u16 __iomem *)(p), (a), (c))
|
|
#define __ide_mm_insl(p, a, c) _insl_ns((volatile u32 __iomem *)(p), (a), (c))
|
|
#define __ide_mm_outsw(p, a, c) _outsw_ns((volatile u16 __iomem *)(p), (a), (c))
|
|
#define __ide_mm_outsl(p, a, c) _outsl_ns((volatile u32 __iomem *)(p), (a), (c))
|
|
|
|
|
|
#define SIO_CONFIG_RA 0x398
|
|
#define SIO_CONFIG_RD 0x399
|
|
|
|
#define SLOW_DOWN_IO
|
|
|
|
extern unsigned long isa_io_base;
|
|
extern unsigned long pci_io_base;
|
|
|
|
#ifdef CONFIG_PPC_ISERIES
|
|
/* __raw_* accessors aren't supported on iSeries */
|
|
#define __raw_readb(addr) { BUG(); 0; }
|
|
#define __raw_readw(addr) { BUG(); 0; }
|
|
#define __raw_readl(addr) { BUG(); 0; }
|
|
#define __raw_readq(addr) { BUG(); 0; }
|
|
#define __raw_writeb(v, addr) { BUG(); 0; }
|
|
#define __raw_writew(v, addr) { BUG(); 0; }
|
|
#define __raw_writel(v, addr) { BUG(); 0; }
|
|
#define __raw_writeq(v, addr) { BUG(); 0; }
|
|
#define readb(addr) iSeries_Read_Byte(addr)
|
|
#define readw(addr) iSeries_Read_Word(addr)
|
|
#define readl(addr) iSeries_Read_Long(addr)
|
|
#define writeb(data, addr) iSeries_Write_Byte((data),(addr))
|
|
#define writew(data, addr) iSeries_Write_Word((data),(addr))
|
|
#define writel(data, addr) iSeries_Write_Long((data),(addr))
|
|
#define memset_io(a,b,c) iSeries_memset_io((a),(b),(c))
|
|
#define memcpy_fromio(a,b,c) iSeries_memcpy_fromio((a), (b), (c))
|
|
#define memcpy_toio(a,b,c) iSeries_memcpy_toio((a), (b), (c))
|
|
|
|
#define inb(addr) readb(((void __iomem *)(long)(addr)))
|
|
#define inw(addr) readw(((void __iomem *)(long)(addr)))
|
|
#define inl(addr) readl(((void __iomem *)(long)(addr)))
|
|
#define outb(data,addr) writeb(data,((void __iomem *)(long)(addr)))
|
|
#define outw(data,addr) writew(data,((void __iomem *)(long)(addr)))
|
|
#define outl(data,addr) writel(data,((void __iomem *)(long)(addr)))
|
|
/*
|
|
* The *_ns versions below don't do byte-swapping.
|
|
* Neither do the standard versions now, these are just here
|
|
* for older code.
|
|
*/
|
|
#define insb(port, buf, ns) _insb((u8 __iomem *)((port)+pci_io_base), (buf), (ns))
|
|
#define insw(port, buf, ns) _insw_ns((u8 __iomem *)((port)+pci_io_base), (buf), (ns))
|
|
#define insl(port, buf, nl) _insl_ns((u8 __iomem *)((port)+pci_io_base), (buf), (nl))
|
|
#define insw_ns(port, buf, ns) _insw_ns((u16 __iomem *)((port)+pci_io_base), (buf), (ns))
|
|
#define insl_ns(port, buf, nl) _insl_ns((u32 __iomem *)((port)+pci_io_base), (buf), (nl))
|
|
#else
|
|
|
|
static inline unsigned char __raw_readb(const volatile void __iomem *addr)
|
|
{
|
|
return *(volatile unsigned char __force *)addr;
|
|
}
|
|
static inline unsigned short __raw_readw(const volatile void __iomem *addr)
|
|
{
|
|
return *(volatile unsigned short __force *)addr;
|
|
}
|
|
static inline unsigned int __raw_readl(const volatile void __iomem *addr)
|
|
{
|
|
return *(volatile unsigned int __force *)addr;
|
|
}
|
|
static inline unsigned long __raw_readq(const volatile void __iomem *addr)
|
|
{
|
|
return *(volatile unsigned long __force *)addr;
|
|
}
|
|
static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
|
|
{
|
|
*(volatile unsigned char __force *)addr = v;
|
|
}
|
|
static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
|
|
{
|
|
*(volatile unsigned short __force *)addr = v;
|
|
}
|
|
static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
|
|
{
|
|
*(volatile unsigned int __force *)addr = v;
|
|
}
|
|
static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
|
|
{
|
|
*(volatile unsigned long __force *)addr = v;
|
|
}
|
|
#define readb(addr) eeh_readb(addr)
|
|
#define readw(addr) eeh_readw(addr)
|
|
#define readl(addr) eeh_readl(addr)
|
|
#define readq(addr) eeh_readq(addr)
|
|
#define writeb(data, addr) eeh_writeb((data), (addr))
|
|
#define writew(data, addr) eeh_writew((data), (addr))
|
|
#define writel(data, addr) eeh_writel((data), (addr))
|
|
#define writeq(data, addr) eeh_writeq((data), (addr))
|
|
#define memset_io(a,b,c) eeh_memset_io((a),(b),(c))
|
|
#define memcpy_fromio(a,b,c) eeh_memcpy_fromio((a),(b),(c))
|
|
#define memcpy_toio(a,b,c) eeh_memcpy_toio((a),(b),(c))
|
|
#define inb(port) eeh_inb((unsigned long)port)
|
|
#define outb(val, port) eeh_outb(val, (unsigned long)port)
|
|
#define inw(port) eeh_inw((unsigned long)port)
|
|
#define outw(val, port) eeh_outw(val, (unsigned long)port)
|
|
#define inl(port) eeh_inl((unsigned long)port)
|
|
#define outl(val, port) eeh_outl(val, (unsigned long)port)
|
|
|
|
/*
|
|
* The insw/outsw/insl/outsl macros don't do byte-swapping.
|
|
* They are only used in practice for transferring buffers which
|
|
* are arrays of bytes, and byte-swapping is not appropriate in
|
|
* that case. - paulus */
|
|
#define insb(port, buf, ns) eeh_insb((port), (buf), (ns))
|
|
#define insw(port, buf, ns) eeh_insw_ns((port), (buf), (ns))
|
|
#define insl(port, buf, nl) eeh_insl_ns((port), (buf), (nl))
|
|
#define insw_ns(port, buf, ns) eeh_insw_ns((port), (buf), (ns))
|
|
#define insl_ns(port, buf, nl) eeh_insl_ns((port), (buf), (nl))
|
|
|
|
#endif
|
|
|
|
#define outsb(port, buf, ns) _outsb((u8 __iomem *)((port)+pci_io_base), (buf), (ns))
|
|
#define outsw(port, buf, ns) _outsw_ns((u16 __iomem *)((port)+pci_io_base), (buf), (ns))
|
|
#define outsl(port, buf, nl) _outsl_ns((u32 __iomem *)((port)+pci_io_base), (buf), (nl))
|
|
|
|
#define readb_relaxed(addr) readb(addr)
|
|
#define readw_relaxed(addr) readw(addr)
|
|
#define readl_relaxed(addr) readl(addr)
|
|
#define readq_relaxed(addr) readq(addr)
|
|
|
|
extern void _insb(volatile u8 __iomem *port, void *buf, int ns);
|
|
extern void _outsb(volatile u8 __iomem *port, const void *buf, int ns);
|
|
extern void _insw(volatile u16 __iomem *port, void *buf, int ns);
|
|
extern void _outsw(volatile u16 __iomem *port, const void *buf, int ns);
|
|
extern void _insl(volatile u32 __iomem *port, void *buf, int nl);
|
|
extern void _outsl(volatile u32 __iomem *port, const void *buf, int nl);
|
|
extern void _insw_ns(volatile u16 __iomem *port, void *buf, int ns);
|
|
extern void _outsw_ns(volatile u16 __iomem *port, const void *buf, int ns);
|
|
extern void _insl_ns(volatile u32 __iomem *port, void *buf, int nl);
|
|
extern void _outsl_ns(volatile u32 __iomem *port, const void *buf, int nl);
|
|
|
|
static inline void mmiowb(void)
|
|
{
|
|
__asm__ __volatile__ ("sync" : : : "memory");
|
|
get_paca()->io_sync = 0;
|
|
}
|
|
|
|
/*
|
|
* output pause versions need a delay at least for the
|
|
* w83c105 ide controller in a p610.
|
|
*/
|
|
#define inb_p(port) inb(port)
|
|
#define outb_p(val, port) (udelay(1), outb((val), (port)))
|
|
#define inw_p(port) inw(port)
|
|
#define outw_p(val, port) (udelay(1), outw((val), (port)))
|
|
#define inl_p(port) inl(port)
|
|
#define outl_p(val, port) (udelay(1), outl((val), (port)))
|
|
|
|
/*
|
|
* The *_ns versions below don't do byte-swapping.
|
|
* Neither do the standard versions now, these are just here
|
|
* for older code.
|
|
*/
|
|
#define outsw_ns(port, buf, ns) _outsw_ns((u16 __iomem *)((port)+pci_io_base), (buf), (ns))
|
|
#define outsl_ns(port, buf, nl) _outsl_ns((u32 __iomem *)((port)+pci_io_base), (buf), (nl))
|
|
|
|
|
|
#define IO_SPACE_LIMIT ~(0UL)
|
|
|
|
|
|
extern int __ioremap_explicit(unsigned long p_addr, unsigned long v_addr,
|
|
unsigned long size, unsigned long flags);
|
|
extern void __iomem *__ioremap(unsigned long address, unsigned long size,
|
|
unsigned long flags);
|
|
|
|
/**
|
|
* ioremap - map bus memory into CPU space
|
|
* @address: bus address of the memory
|
|
* @size: size of the resource to map
|
|
*
|
|
* ioremap performs a platform specific sequence of operations to
|
|
* make bus memory CPU accessible via the readb/readw/readl/writeb/
|
|
* writew/writel functions and the other mmio helpers. The returned
|
|
* address is not guaranteed to be usable directly as a virtual
|
|
* address.
|
|
*/
|
|
extern void __iomem *ioremap(unsigned long address, unsigned long size);
|
|
|
|
#define ioremap_nocache(addr, size) ioremap((addr), (size))
|
|
extern int iounmap_explicit(volatile void __iomem *addr, unsigned long size);
|
|
extern void iounmap(volatile void __iomem *addr);
|
|
extern void __iomem * reserve_phb_iospace(unsigned long size);
|
|
|
|
/**
|
|
* virt_to_phys - map virtual addresses to physical
|
|
* @address: address to remap
|
|
*
|
|
* The returned physical address is the physical (CPU) mapping for
|
|
* the memory address given. It is only valid to use this function on
|
|
* addresses directly mapped or allocated via kmalloc.
|
|
*
|
|
* This function does not give bus mappings for DMA transfers. In
|
|
* almost all conceivable cases a device driver should not be using
|
|
* this function
|
|
*/
|
|
static inline unsigned long virt_to_phys(volatile void * address)
|
|
{
|
|
return __pa((unsigned long)address);
|
|
}
|
|
|
|
/**
|
|
* phys_to_virt - map physical address to virtual
|
|
* @address: address to remap
|
|
*
|
|
* The returned virtual address is a current CPU mapping for
|
|
* the memory address given. It is only valid to use this function on
|
|
* addresses that have a kernel mapping
|
|
*
|
|
* This function does not handle bus mappings for DMA transfers. In
|
|
* almost all conceivable cases a device driver should not be using
|
|
* this function
|
|
*/
|
|
static inline void * phys_to_virt(unsigned long address)
|
|
{
|
|
return (void *)__va(address);
|
|
}
|
|
|
|
/*
|
|
* Change "struct page" to physical address.
|
|
*/
|
|
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
|
|
|
|
/* We do NOT want virtual merging, it would put too much pressure on
|
|
* our iommu allocator. Instead, we want drivers to be smart enough
|
|
* to coalesce sglists that happen to have been mapped in a contiguous
|
|
* way by the iommu
|
|
*/
|
|
#define BIO_VMERGE_BOUNDARY 0
|
|
|
|
static inline void iosync(void)
|
|
{
|
|
__asm__ __volatile__ ("sync" : : : "memory");
|
|
}
|
|
|
|
/* Enforce in-order execution of data I/O.
|
|
* No distinction between read/write on PPC; use eieio for all three.
|
|
*/
|
|
#define iobarrier_rw() eieio()
|
|
#define iobarrier_r() eieio()
|
|
#define iobarrier_w() eieio()
|
|
|
|
/*
|
|
* 8, 16 and 32 bit, big and little endian I/O operations, with barrier.
|
|
* These routines do not perform EEH-related I/O address translation,
|
|
* and should not be used directly by device drivers. Use inb/readb
|
|
* instead.
|
|
*/
|
|
static inline int in_8(const volatile unsigned char __iomem *addr)
|
|
{
|
|
int ret;
|
|
|
|
__asm__ __volatile__("sync; lbz%U1%X1 %0,%1; twi 0,%0,0; isync"
|
|
: "=r" (ret) : "m" (*addr));
|
|
return ret;
|
|
}
|
|
|
|
static inline void out_8(volatile unsigned char __iomem *addr, int val)
|
|
{
|
|
__asm__ __volatile__("sync; stb%U0%X0 %1,%0"
|
|
: "=m" (*addr) : "r" (val));
|
|
get_paca()->io_sync = 1;
|
|
}
|
|
|
|
static inline int in_le16(const volatile unsigned short __iomem *addr)
|
|
{
|
|
int ret;
|
|
|
|
__asm__ __volatile__("sync; lhbrx %0,0,%1; twi 0,%0,0; isync"
|
|
: "=r" (ret) : "r" (addr), "m" (*addr));
|
|
return ret;
|
|
}
|
|
|
|
static inline int in_be16(const volatile unsigned short __iomem *addr)
|
|
{
|
|
int ret;
|
|
|
|
__asm__ __volatile__("sync; lhz%U1%X1 %0,%1; twi 0,%0,0; isync"
|
|
: "=r" (ret) : "m" (*addr));
|
|
return ret;
|
|
}
|
|
|
|
static inline void out_le16(volatile unsigned short __iomem *addr, int val)
|
|
{
|
|
__asm__ __volatile__("sync; sthbrx %1,0,%2"
|
|
: "=m" (*addr) : "r" (val), "r" (addr));
|
|
get_paca()->io_sync = 1;
|
|
}
|
|
|
|
static inline void out_be16(volatile unsigned short __iomem *addr, int val)
|
|
{
|
|
__asm__ __volatile__("sync; sth%U0%X0 %1,%0"
|
|
: "=m" (*addr) : "r" (val));
|
|
get_paca()->io_sync = 1;
|
|
}
|
|
|
|
static inline unsigned in_le32(const volatile unsigned __iomem *addr)
|
|
{
|
|
unsigned ret;
|
|
|
|
__asm__ __volatile__("sync; lwbrx %0,0,%1; twi 0,%0,0; isync"
|
|
: "=r" (ret) : "r" (addr), "m" (*addr));
|
|
return ret;
|
|
}
|
|
|
|
static inline unsigned in_be32(const volatile unsigned __iomem *addr)
|
|
{
|
|
unsigned ret;
|
|
|
|
__asm__ __volatile__("sync; lwz%U1%X1 %0,%1; twi 0,%0,0; isync"
|
|
: "=r" (ret) : "m" (*addr));
|
|
return ret;
|
|
}
|
|
|
|
static inline void out_le32(volatile unsigned __iomem *addr, int val)
|
|
{
|
|
__asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr)
|
|
: "r" (val), "r" (addr));
|
|
get_paca()->io_sync = 1;
|
|
}
|
|
|
|
static inline void out_be32(volatile unsigned __iomem *addr, int val)
|
|
{
|
|
__asm__ __volatile__("sync; stw%U0%X0 %1,%0"
|
|
: "=m" (*addr) : "r" (val));
|
|
get_paca()->io_sync = 1;
|
|
}
|
|
|
|
static inline unsigned long in_le64(const volatile unsigned long __iomem *addr)
|
|
{
|
|
unsigned long tmp, ret;
|
|
|
|
__asm__ __volatile__(
|
|
"sync\n"
|
|
"ld %1,0(%2)\n"
|
|
"twi 0,%1,0\n"
|
|
"isync\n"
|
|
"rldimi %0,%1,5*8,1*8\n"
|
|
"rldimi %0,%1,3*8,2*8\n"
|
|
"rldimi %0,%1,1*8,3*8\n"
|
|
"rldimi %0,%1,7*8,4*8\n"
|
|
"rldicl %1,%1,32,0\n"
|
|
"rlwimi %0,%1,8,8,31\n"
|
|
"rlwimi %0,%1,24,16,23\n"
|
|
: "=r" (ret) , "=r" (tmp) : "b" (addr) , "m" (*addr));
|
|
return ret;
|
|
}
|
|
|
|
static inline unsigned long in_be64(const volatile unsigned long __iomem *addr)
|
|
{
|
|
unsigned long ret;
|
|
|
|
__asm__ __volatile__("sync; ld%U1%X1 %0,%1; twi 0,%0,0; isync"
|
|
: "=r" (ret) : "m" (*addr));
|
|
return ret;
|
|
}
|
|
|
|
static inline void out_le64(volatile unsigned long __iomem *addr, unsigned long val)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
__asm__ __volatile__(
|
|
"rldimi %0,%1,5*8,1*8\n"
|
|
"rldimi %0,%1,3*8,2*8\n"
|
|
"rldimi %0,%1,1*8,3*8\n"
|
|
"rldimi %0,%1,7*8,4*8\n"
|
|
"rldicl %1,%1,32,0\n"
|
|
"rlwimi %0,%1,8,8,31\n"
|
|
"rlwimi %0,%1,24,16,23\n"
|
|
"sync\n"
|
|
"std %0,0(%3)"
|
|
: "=&r" (tmp) , "=&r" (val) : "1" (val) , "b" (addr) , "m" (*addr));
|
|
get_paca()->io_sync = 1;
|
|
}
|
|
|
|
static inline void out_be64(volatile unsigned long __iomem *addr, unsigned long val)
|
|
{
|
|
__asm__ __volatile__("sync; std%U0%X0 %1,%0" : "=m" (*addr) : "r" (val));
|
|
get_paca()->io_sync = 1;
|
|
}
|
|
|
|
#ifndef CONFIG_PPC_ISERIES
|
|
#include <asm/eeh.h>
|
|
#endif
|
|
|
|
/**
|
|
* check_signature - find BIOS signatures
|
|
* @io_addr: mmio address to check
|
|
* @signature: signature block
|
|
* @length: length of signature
|
|
*
|
|
* Perform a signature comparison with the mmio address io_addr. This
|
|
* address should have been obtained by ioremap.
|
|
* Returns 1 on a match.
|
|
*/
|
|
static inline int check_signature(const volatile void __iomem * io_addr,
|
|
const unsigned char *signature, int length)
|
|
{
|
|
int retval = 0;
|
|
#ifndef CONFIG_PPC_ISERIES
|
|
do {
|
|
if (readb(io_addr) != *signature)
|
|
goto out;
|
|
io_addr++;
|
|
signature++;
|
|
length--;
|
|
} while (length);
|
|
retval = 1;
|
|
out:
|
|
#endif
|
|
return retval;
|
|
}
|
|
|
|
/* Nothing to do */
|
|
|
|
#define dma_cache_inv(_start,_size) do { } while (0)
|
|
#define dma_cache_wback(_start,_size) do { } while (0)
|
|
#define dma_cache_wback_inv(_start,_size) do { } while (0)
|
|
|
|
|
|
/*
|
|
* Convert a physical pointer to a virtual kernel pointer for /dev/mem
|
|
* access
|
|
*/
|
|
#define xlate_dev_mem_ptr(p) __va(p)
|
|
|
|
/*
|
|
* Convert a virtual cached pointer to an uncached pointer
|
|
*/
|
|
#define xlate_dev_kmem_ptr(p) p
|
|
|
|
#endif /* __KERNEL__ */
|
|
|
|
#endif /* CONFIG_PPC64 */
|
|
#endif /* _ASM_POWERPC_IO_H */
|