mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-22 17:33:01 +00:00
76cdc083f4
The IMX family of Application Processors is shipped with a Keypad Port supported by this driver. The peripheral can control up to an 8x8 matrix key pad where all the scanning is done via software. The hardware provides two interrupts: one for key presses (KDI) and one for all key releases (KRI). There is also a simple circuit for glitch reduction (said for synchronization) made by two series of 3 D-latches clocked by the keypad-clock that stabilize the interrupts sources. KDI and KRI are fired only if the respective conditions are maintained for at last 4 keypad-clock cycle. Since those circuits are poor for a correct debounce process (the keypad-clock frequency is 32K and bounces longer than 94us are not masked) the driver, when an interrupt arrives, samples the matrix with a period of 10ms until the readins are stable for IMX_KEYPAD_SCANS_FOR_STABILITY times (currently set at 3). After getting stable result appropriate events are sent through the input stack. If some keys are maintained pressed, the driver continues to scan the matrix with a longer period (60ms) to catch possible multiple key presses without overloading the cpu. This process ends when all keys are released. This driver is tested to build in kernel or as a module and follow the specification of Freescale Application processors: i.MX25 i.MX27 i.MX31 i.MX35 i.MX51 especially tested on i.MX31. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
43 lines
1.7 KiB
Makefile
43 lines
1.7 KiB
Makefile
#
|
|
# Makefile for the input core drivers.
|
|
#
|
|
|
|
# Each configuration option enables a list of files.
|
|
|
|
obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
|
|
obj-$(CONFIG_KEYBOARD_ADP5520) += adp5520-keys.o
|
|
obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o
|
|
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
|
|
obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
|
|
obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
|
|
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
|
|
obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o
|
|
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
|
|
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
|
|
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
|
|
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
|
|
obj-$(CONFIG_KEYBOARD_IMX) += imx_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
|
|
obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
|
|
obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o
|
|
obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o
|
|
obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
|
|
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
|
|
obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
|
|
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
|
|
obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o
|
|
obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
|
|
obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
|
|
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
|
|
obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
|
|
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
|
|
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
|
|
obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.o
|
|
obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
|
|
obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o
|