mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-27 03:47:43 +00:00
0d0109a440
If such bit exists on a given CPU, it must be set by the firmware or boot-loader prior to starting the kernel (see Documentation/arm64/booting.txt). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
176 lines
4.2 KiB
ArmAsm
176 lines
4.2 KiB
ArmAsm
/*
|
|
* Based on arch/arm/mm/proc.S
|
|
*
|
|
* Copyright (C) 2001 Deep Blue Solutions Ltd.
|
|
* Copyright (C) 2012 ARM Ltd.
|
|
* Author: Catalin Marinas <catalin.marinas@arm.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/hwcap.h>
|
|
#include <asm/pgtable-hwdef.h>
|
|
#include <asm/pgtable.h>
|
|
|
|
#include "proc-macros.S"
|
|
|
|
#ifndef CONFIG_SMP
|
|
/* PTWs cacheable, inner/outer WBWA not shareable */
|
|
#define TCR_FLAGS TCR_IRGN_WBWA | TCR_ORGN_WBWA
|
|
#else
|
|
/* PTWs cacheable, inner/outer WBWA shareable */
|
|
#define TCR_FLAGS TCR_IRGN_WBWA | TCR_ORGN_WBWA | TCR_SHARED
|
|
#endif
|
|
|
|
#define MAIR(attr, mt) ((attr) << ((mt) * 8))
|
|
|
|
/*
|
|
* cpu_cache_off()
|
|
*
|
|
* Turn the CPU D-cache off.
|
|
*/
|
|
ENTRY(cpu_cache_off)
|
|
mrs x0, sctlr_el1
|
|
bic x0, x0, #1 << 2 // clear SCTLR.C
|
|
msr sctlr_el1, x0
|
|
isb
|
|
ret
|
|
ENDPROC(cpu_cache_off)
|
|
|
|
/*
|
|
* cpu_reset(loc)
|
|
*
|
|
* Perform a soft reset of the system. Put the CPU into the same state
|
|
* as it would be if it had been reset, and branch to what would be the
|
|
* reset vector. It must be executed with the flat identity mapping.
|
|
*
|
|
* - loc - location to jump to for soft reset
|
|
*/
|
|
.align 5
|
|
ENTRY(cpu_reset)
|
|
mrs x1, sctlr_el1
|
|
bic x1, x1, #1
|
|
msr sctlr_el1, x1 // disable the MMU
|
|
isb
|
|
ret x0
|
|
ENDPROC(cpu_reset)
|
|
|
|
/*
|
|
* cpu_do_idle()
|
|
*
|
|
* Idle the processor (wait for interrupt).
|
|
*/
|
|
ENTRY(cpu_do_idle)
|
|
dsb sy // WFI may enter a low-power mode
|
|
wfi
|
|
ret
|
|
ENDPROC(cpu_do_idle)
|
|
|
|
/*
|
|
* cpu_switch_mm(pgd_phys, tsk)
|
|
*
|
|
* Set the translation table base pointer to be pgd_phys.
|
|
*
|
|
* - pgd_phys - physical address of new TTB
|
|
*/
|
|
ENTRY(cpu_do_switch_mm)
|
|
mmid w1, x1 // get mm->context.id
|
|
bfi x0, x1, #48, #16 // set the ASID
|
|
msr ttbr0_el1, x0 // set TTBR0
|
|
isb
|
|
ret
|
|
ENDPROC(cpu_do_switch_mm)
|
|
|
|
cpu_name:
|
|
.ascii "AArch64 Processor"
|
|
.align
|
|
|
|
.section ".text.init", #alloc, #execinstr
|
|
|
|
/*
|
|
* __cpu_setup
|
|
*
|
|
* Initialise the processor for turning the MMU on. Return in x0 the
|
|
* value of the SCTLR_EL1 register.
|
|
*/
|
|
ENTRY(__cpu_setup)
|
|
/*
|
|
* Preserve the link register across the function call.
|
|
*/
|
|
mov x28, lr
|
|
bl __flush_dcache_all
|
|
mov lr, x28
|
|
ic iallu // I+BTB cache invalidate
|
|
dsb sy
|
|
|
|
mov x0, #3 << 20
|
|
msr cpacr_el1, x0 // Enable FP/ASIMD
|
|
mov x0, #1
|
|
msr oslar_el1, x0 // Set the debug OS lock
|
|
tlbi vmalle1is // invalidate I + D TLBs
|
|
/*
|
|
* Memory region attributes for LPAE:
|
|
*
|
|
* n = AttrIndx[2:0]
|
|
* n MAIR
|
|
* DEVICE_nGnRnE 000 00000000
|
|
* DEVICE_nGnRE 001 00000100
|
|
* DEVICE_GRE 010 00001100
|
|
* NORMAL_NC 011 01000100
|
|
* NORMAL 100 11111111
|
|
*/
|
|
ldr x5, =MAIR(0x00, MT_DEVICE_nGnRnE) | \
|
|
MAIR(0x04, MT_DEVICE_nGnRE) | \
|
|
MAIR(0x0c, MT_DEVICE_GRE) | \
|
|
MAIR(0x44, MT_NORMAL_NC) | \
|
|
MAIR(0xff, MT_NORMAL)
|
|
msr mair_el1, x5
|
|
/*
|
|
* Prepare SCTLR
|
|
*/
|
|
adr x5, crval
|
|
ldp w5, w6, [x5]
|
|
mrs x0, sctlr_el1
|
|
bic x0, x0, x5 // clear bits
|
|
orr x0, x0, x6 // set bits
|
|
/*
|
|
* Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for
|
|
* both user and kernel.
|
|
*/
|
|
ldr x10, =TCR_TxSZ(VA_BITS) | TCR_FLAGS | TCR_IPS_40BIT | \
|
|
TCR_ASID16 | (1 << 31)
|
|
#ifdef CONFIG_ARM64_64K_PAGES
|
|
orr x10, x10, TCR_TG0_64K
|
|
orr x10, x10, TCR_TG1_64K
|
|
#endif
|
|
msr tcr_el1, x10
|
|
ret // return to head.S
|
|
ENDPROC(__cpu_setup)
|
|
|
|
/*
|
|
* n n T
|
|
* U E WT T UD US IHBS
|
|
* CE0 XWHW CZ ME TEEA S
|
|
* .... .IEE .... NEAI TE.I ..AD DEN0 ACAM
|
|
* 0011 0... 1101 ..0. ..0. 10.. .... .... < hardware reserved
|
|
* .... .100 .... 01.1 11.1 ..01 0001 1101 < software settings
|
|
*/
|
|
.type crval, #object
|
|
crval:
|
|
.word 0x030802e2 // clear
|
|
.word 0x0405d11d // set
|