mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-27 03:47:43 +00:00
9c3f0e2b52
The atari_NCR5380.c core driver now takes care of bus reset upon driver initialization if required (same as NCR5380.c). Move the Toshiba CD-ROM support into the core driver, enabled with a host flag, so that all NCR5380 drivers can make use of it. Drop the RESET_BOOT macros and the ATARI_SCSI_RESET_BOOT and ATARI_SCSI_TOSHIBA_DELAY Kconfig symbols, which are now redundant. Remove the atari_scsi_reset_boot(), mac_scsi_reset_boot() and sun3_scsi_reset_boot() routines. None of this duplicated code is needed now that all drivers can use NCR5380_maybe_reset_bus(). This brings atari_scsi, mac_scsi and sun3_scsi into line with all of the other NCR5380 drivers. The bus reset may raise an interrupt. That would be new behaviour for atari_scsi only when CONFIG_ATARI_SCSI_RESET_BOOT=n. The ST DMA interrupt is not assigned to atari_scsi at this stage, so CONFIG_ATARI_SCSI_RESET_BOOT=y may well be problematic already. Regardless, do_reset() now raises and clears the interrupt within local_irq_save/restore which should avoid problems. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ondrej Zary <linux@rainbow-software.org> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
641 lines
14 KiB
C
641 lines
14 KiB
C
/*
|
|
* Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
|
|
*
|
|
* Sun3 DMA routines added by Sam Creasey (sammy@sammy.net)
|
|
*
|
|
* VME support added by Sam Creasey
|
|
*
|
|
* TODO: modify this driver to support multiple Sun3 SCSI VME boards
|
|
*
|
|
* Adapted from mac_scsinew.c:
|
|
*/
|
|
/*
|
|
* Generic Macintosh NCR5380 driver
|
|
*
|
|
* Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
|
|
*
|
|
* derived in part from:
|
|
*/
|
|
/*
|
|
* Generic Generic NCR5380 driver
|
|
*
|
|
* Copyright 1995, Russell King
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/dvma.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
#include "sun3_scsi.h"
|
|
|
|
/* Definitions for the core NCR5380 driver. */
|
|
|
|
#define REAL_DMA
|
|
/* #define SUPPORT_TAGS */
|
|
/* minimum number of bytes to do dma on */
|
|
#define DMA_MIN_SIZE 129
|
|
|
|
/* #define MAX_TAGS 32 */
|
|
|
|
#define NCR5380_implementation_fields /* none */
|
|
|
|
#define NCR5380_read(reg) sun3scsi_read(reg)
|
|
#define NCR5380_write(reg, value) sun3scsi_write(reg, value)
|
|
|
|
#define NCR5380_queue_command sun3scsi_queue_command
|
|
#define NCR5380_bus_reset sun3scsi_bus_reset
|
|
#define NCR5380_abort sun3scsi_abort
|
|
#define NCR5380_show_info sun3scsi_show_info
|
|
#define NCR5380_info sun3scsi_info
|
|
|
|
#define NCR5380_dma_read_setup(instance, data, count) \
|
|
sun3scsi_dma_setup(data, count, 0)
|
|
#define NCR5380_dma_write_setup(instance, data, count) \
|
|
sun3scsi_dma_setup(data, count, 1)
|
|
#define NCR5380_dma_residual(instance) \
|
|
sun3scsi_dma_residual(instance)
|
|
#define NCR5380_dma_xfer_len(instance, cmd, phase) \
|
|
sun3scsi_dma_xfer_len(cmd->SCp.this_residual, cmd, !((phase) & SR_IO))
|
|
|
|
#define NCR5380_acquire_dma_irq(instance) (1)
|
|
#define NCR5380_release_dma_irq(instance)
|
|
|
|
#include "NCR5380.h"
|
|
|
|
|
|
extern int sun3_map_test(unsigned long, char *);
|
|
|
|
static int setup_can_queue = -1;
|
|
module_param(setup_can_queue, int, 0);
|
|
static int setup_cmd_per_lun = -1;
|
|
module_param(setup_cmd_per_lun, int, 0);
|
|
static int setup_sg_tablesize = -1;
|
|
module_param(setup_sg_tablesize, int, 0);
|
|
#ifdef SUPPORT_TAGS
|
|
static int setup_use_tagged_queuing = -1;
|
|
module_param(setup_use_tagged_queuing, int, 0);
|
|
#endif
|
|
static int setup_hostid = -1;
|
|
module_param(setup_hostid, int, 0);
|
|
|
|
/* ms to wait after hitting dma regs */
|
|
#define SUN3_DMA_DELAY 10
|
|
|
|
/* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
|
|
#define SUN3_DVMA_BUFSIZE 0xe000
|
|
|
|
static struct scsi_cmnd *sun3_dma_setup_done;
|
|
static unsigned char *sun3_scsi_regp;
|
|
static volatile struct sun3_dma_regs *dregs;
|
|
static struct sun3_udc_regs *udc_regs;
|
|
static unsigned char *sun3_dma_orig_addr;
|
|
static unsigned long sun3_dma_orig_count;
|
|
static int sun3_dma_active;
|
|
static unsigned long last_residual;
|
|
static struct Scsi_Host *default_instance;
|
|
|
|
/*
|
|
* NCR 5380 register access functions
|
|
*/
|
|
|
|
static inline unsigned char sun3scsi_read(int reg)
|
|
{
|
|
return in_8(sun3_scsi_regp + reg);
|
|
}
|
|
|
|
static inline void sun3scsi_write(int reg, int value)
|
|
{
|
|
out_8(sun3_scsi_regp + reg, value);
|
|
}
|
|
|
|
#ifndef SUN3_SCSI_VME
|
|
/* dma controller register access functions */
|
|
|
|
static inline unsigned short sun3_udc_read(unsigned char reg)
|
|
{
|
|
unsigned short ret;
|
|
|
|
dregs->udc_addr = UDC_CSR;
|
|
udelay(SUN3_DMA_DELAY);
|
|
ret = dregs->udc_data;
|
|
udelay(SUN3_DMA_DELAY);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline void sun3_udc_write(unsigned short val, unsigned char reg)
|
|
{
|
|
dregs->udc_addr = reg;
|
|
udelay(SUN3_DMA_DELAY);
|
|
dregs->udc_data = val;
|
|
udelay(SUN3_DMA_DELAY);
|
|
}
|
|
#endif
|
|
|
|
// safe bits for the CSR
|
|
#define CSR_GOOD 0x060f
|
|
|
|
static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
|
|
{
|
|
unsigned short csr = dregs->csr;
|
|
int handled = 0;
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
dregs->csr &= ~CSR_DMA_ENABLE;
|
|
#endif
|
|
|
|
if(csr & ~CSR_GOOD) {
|
|
if(csr & CSR_DMA_BUSERR) {
|
|
printk("scsi%d: bus error in dma\n", default_instance->host_no);
|
|
}
|
|
|
|
if(csr & CSR_DMA_CONFLICT) {
|
|
printk("scsi%d: dma conflict\n", default_instance->host_no);
|
|
}
|
|
handled = 1;
|
|
}
|
|
|
|
if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
|
|
NCR5380_intr(irq, dummy);
|
|
handled = 1;
|
|
}
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/*
|
|
* Debug stuff - to be called on NMI, or sysrq key. Use at your own risk;
|
|
* reentering NCR5380_print_status seems to have ugly side effects
|
|
*/
|
|
|
|
/* this doesn't seem to get used at all -- sam */
|
|
#if 0
|
|
void sun3_sun3_debug (void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (default_instance) {
|
|
local_irq_save(flags);
|
|
NCR5380_print_status(default_instance);
|
|
local_irq_restore(flags);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
/* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
|
|
static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
|
|
{
|
|
void *addr;
|
|
|
|
if(sun3_dma_orig_addr != NULL)
|
|
dvma_unmap(sun3_dma_orig_addr);
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
addr = (void *)dvma_map_vme((unsigned long) data, count);
|
|
#else
|
|
addr = (void *)dvma_map((unsigned long) data, count);
|
|
#endif
|
|
|
|
sun3_dma_orig_addr = addr;
|
|
sun3_dma_orig_count = count;
|
|
|
|
#ifndef SUN3_SCSI_VME
|
|
dregs->fifo_count = 0;
|
|
sun3_udc_write(UDC_RESET, UDC_CSR);
|
|
|
|
/* reset fifo */
|
|
dregs->csr &= ~CSR_FIFO;
|
|
dregs->csr |= CSR_FIFO;
|
|
#endif
|
|
|
|
/* set direction */
|
|
if(write_flag)
|
|
dregs->csr |= CSR_SEND;
|
|
else
|
|
dregs->csr &= ~CSR_SEND;
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
dregs->csr |= CSR_PACK_ENABLE;
|
|
|
|
dregs->dma_addr_hi = ((unsigned long)addr >> 16);
|
|
dregs->dma_addr_lo = ((unsigned long)addr & 0xffff);
|
|
|
|
dregs->dma_count_hi = 0;
|
|
dregs->dma_count_lo = 0;
|
|
dregs->fifo_count_hi = 0;
|
|
dregs->fifo_count = 0;
|
|
#else
|
|
/* byte count for fifo */
|
|
dregs->fifo_count = count;
|
|
|
|
sun3_udc_write(UDC_RESET, UDC_CSR);
|
|
|
|
/* reset fifo */
|
|
dregs->csr &= ~CSR_FIFO;
|
|
dregs->csr |= CSR_FIFO;
|
|
|
|
if(dregs->fifo_count != count) {
|
|
printk("scsi%d: fifo_mismatch %04x not %04x\n",
|
|
default_instance->host_no, dregs->fifo_count,
|
|
(unsigned int) count);
|
|
NCR5380_dprint(NDEBUG_DMA, default_instance);
|
|
}
|
|
|
|
/* setup udc */
|
|
udc_regs->addr_hi = (((unsigned long)(addr) & 0xff0000) >> 8);
|
|
udc_regs->addr_lo = ((unsigned long)(addr) & 0xffff);
|
|
udc_regs->count = count/2; /* count in words */
|
|
udc_regs->mode_hi = UDC_MODE_HIWORD;
|
|
if(write_flag) {
|
|
if(count & 1)
|
|
udc_regs->count++;
|
|
udc_regs->mode_lo = UDC_MODE_LSEND;
|
|
udc_regs->rsel = UDC_RSEL_SEND;
|
|
} else {
|
|
udc_regs->mode_lo = UDC_MODE_LRECV;
|
|
udc_regs->rsel = UDC_RSEL_RECV;
|
|
}
|
|
|
|
/* announce location of regs block */
|
|
sun3_udc_write(((dvma_vtob(udc_regs) & 0xff0000) >> 8),
|
|
UDC_CHN_HI);
|
|
|
|
sun3_udc_write((dvma_vtob(udc_regs) & 0xffff), UDC_CHN_LO);
|
|
|
|
/* set dma master on */
|
|
sun3_udc_write(0xd, UDC_MODE);
|
|
|
|
/* interrupt enable */
|
|
sun3_udc_write(UDC_INT_ENABLE, UDC_CSR);
|
|
#endif
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
#ifndef SUN3_SCSI_VME
|
|
static inline unsigned long sun3scsi_dma_count(struct Scsi_Host *instance)
|
|
{
|
|
unsigned short resid;
|
|
|
|
dregs->udc_addr = 0x32;
|
|
udelay(SUN3_DMA_DELAY);
|
|
resid = dregs->udc_data;
|
|
udelay(SUN3_DMA_DELAY);
|
|
resid *= 2;
|
|
|
|
return (unsigned long) resid;
|
|
}
|
|
#endif
|
|
|
|
static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
|
|
{
|
|
return last_residual;
|
|
}
|
|
|
|
static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted,
|
|
struct scsi_cmnd *cmd,
|
|
int write_flag)
|
|
{
|
|
if (cmd->request->cmd_type == REQ_TYPE_FS)
|
|
return wanted;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static inline int sun3scsi_dma_start(unsigned long count, unsigned char *data)
|
|
{
|
|
#ifdef SUN3_SCSI_VME
|
|
unsigned short csr;
|
|
|
|
csr = dregs->csr;
|
|
|
|
dregs->dma_count_hi = (sun3_dma_orig_count >> 16);
|
|
dregs->dma_count_lo = (sun3_dma_orig_count & 0xffff);
|
|
|
|
dregs->fifo_count_hi = (sun3_dma_orig_count >> 16);
|
|
dregs->fifo_count = (sun3_dma_orig_count & 0xffff);
|
|
|
|
/* if(!(csr & CSR_DMA_ENABLE))
|
|
* dregs->csr |= CSR_DMA_ENABLE;
|
|
*/
|
|
#else
|
|
sun3_udc_write(UDC_CHN_START, UDC_CSR);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* clean up after our dma is done */
|
|
static int sun3scsi_dma_finish(int write_flag)
|
|
{
|
|
unsigned short __maybe_unused count;
|
|
unsigned short fifo;
|
|
int ret = 0;
|
|
|
|
sun3_dma_active = 0;
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
dregs->csr &= ~CSR_DMA_ENABLE;
|
|
|
|
fifo = dregs->fifo_count;
|
|
if (write_flag) {
|
|
if ((fifo > 0) && (fifo < sun3_dma_orig_count))
|
|
fifo++;
|
|
}
|
|
|
|
last_residual = fifo;
|
|
/* empty bytes from the fifo which didn't make it */
|
|
if ((!write_flag) && (dregs->csr & CSR_LEFT)) {
|
|
unsigned char *vaddr;
|
|
|
|
vaddr = (unsigned char *)dvma_vmetov(sun3_dma_orig_addr);
|
|
|
|
vaddr += (sun3_dma_orig_count - fifo);
|
|
vaddr--;
|
|
|
|
switch (dregs->csr & CSR_LEFT) {
|
|
case CSR_LEFT_3:
|
|
*vaddr = (dregs->bpack_lo & 0xff00) >> 8;
|
|
vaddr--;
|
|
|
|
case CSR_LEFT_2:
|
|
*vaddr = (dregs->bpack_hi & 0x00ff);
|
|
vaddr--;
|
|
|
|
case CSR_LEFT_1:
|
|
*vaddr = (dregs->bpack_hi & 0xff00) >> 8;
|
|
break;
|
|
}
|
|
}
|
|
#else
|
|
// check to empty the fifo on a read
|
|
if(!write_flag) {
|
|
int tmo = 20000; /* .2 sec */
|
|
|
|
while(1) {
|
|
if(dregs->csr & CSR_FIFO_EMPTY)
|
|
break;
|
|
|
|
if(--tmo <= 0) {
|
|
printk("sun3scsi: fifo failed to empty!\n");
|
|
return 1;
|
|
}
|
|
udelay(10);
|
|
}
|
|
}
|
|
|
|
count = sun3scsi_dma_count(default_instance);
|
|
|
|
fifo = dregs->fifo_count;
|
|
last_residual = fifo;
|
|
|
|
/* empty bytes from the fifo which didn't make it */
|
|
if((!write_flag) && (count - fifo) == 2) {
|
|
unsigned short data;
|
|
unsigned char *vaddr;
|
|
|
|
data = dregs->fifo_data;
|
|
vaddr = (unsigned char *)dvma_btov(sun3_dma_orig_addr);
|
|
|
|
vaddr += (sun3_dma_orig_count - fifo);
|
|
|
|
vaddr[-2] = (data & 0xff00) >> 8;
|
|
vaddr[-1] = (data & 0xff);
|
|
}
|
|
#endif
|
|
|
|
dvma_unmap(sun3_dma_orig_addr);
|
|
sun3_dma_orig_addr = NULL;
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
dregs->dma_addr_hi = 0;
|
|
dregs->dma_addr_lo = 0;
|
|
dregs->dma_count_hi = 0;
|
|
dregs->dma_count_lo = 0;
|
|
|
|
dregs->fifo_count = 0;
|
|
dregs->fifo_count_hi = 0;
|
|
|
|
dregs->csr &= ~CSR_SEND;
|
|
/* dregs->csr |= CSR_DMA_ENABLE; */
|
|
#else
|
|
sun3_udc_write(UDC_RESET, UDC_CSR);
|
|
dregs->fifo_count = 0;
|
|
dregs->csr &= ~CSR_SEND;
|
|
|
|
/* reset fifo */
|
|
dregs->csr &= ~CSR_FIFO;
|
|
dregs->csr |= CSR_FIFO;
|
|
#endif
|
|
|
|
sun3_dma_setup_done = NULL;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#include "atari_NCR5380.c"
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
#define SUN3_SCSI_NAME "Sun3 NCR5380 VME SCSI"
|
|
#define DRV_MODULE_NAME "sun3_scsi_vme"
|
|
#else
|
|
#define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
|
|
#define DRV_MODULE_NAME "sun3_scsi"
|
|
#endif
|
|
|
|
#define PFX DRV_MODULE_NAME ": "
|
|
|
|
static struct scsi_host_template sun3_scsi_template = {
|
|
.module = THIS_MODULE,
|
|
.proc_name = DRV_MODULE_NAME,
|
|
.show_info = sun3scsi_show_info,
|
|
.name = SUN3_SCSI_NAME,
|
|
.info = sun3scsi_info,
|
|
.queuecommand = sun3scsi_queue_command,
|
|
.eh_abort_handler = sun3scsi_abort,
|
|
.eh_bus_reset_handler = sun3scsi_bus_reset,
|
|
.can_queue = 16,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_NONE,
|
|
.cmd_per_lun = 2,
|
|
.use_clustering = DISABLE_CLUSTERING
|
|
};
|
|
|
|
static int __init sun3_scsi_probe(struct platform_device *pdev)
|
|
{
|
|
struct Scsi_Host *instance;
|
|
int error;
|
|
struct resource *irq, *mem;
|
|
unsigned char *ioaddr;
|
|
int host_flags = 0;
|
|
#ifdef SUN3_SCSI_VME
|
|
int i;
|
|
#endif
|
|
|
|
if (setup_can_queue > 0)
|
|
sun3_scsi_template.can_queue = setup_can_queue;
|
|
if (setup_cmd_per_lun > 0)
|
|
sun3_scsi_template.cmd_per_lun = setup_cmd_per_lun;
|
|
if (setup_sg_tablesize >= 0)
|
|
sun3_scsi_template.sg_tablesize = setup_sg_tablesize;
|
|
if (setup_hostid >= 0)
|
|
sun3_scsi_template.this_id = setup_hostid & 7;
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
ioaddr = NULL;
|
|
for (i = 0; i < 2; i++) {
|
|
unsigned char x;
|
|
|
|
irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, i);
|
|
if (!irq || !mem)
|
|
break;
|
|
|
|
ioaddr = sun3_ioremap(mem->start, resource_size(mem),
|
|
SUN3_PAGE_TYPE_VME16);
|
|
dregs = (struct sun3_dma_regs *)(ioaddr + 8);
|
|
|
|
if (sun3_map_test((unsigned long)dregs, &x)) {
|
|
unsigned short oldcsr;
|
|
|
|
oldcsr = dregs->csr;
|
|
dregs->csr = 0;
|
|
udelay(SUN3_DMA_DELAY);
|
|
if (dregs->csr == 0x1400)
|
|
break;
|
|
|
|
dregs->csr = oldcsr;
|
|
}
|
|
|
|
iounmap(ioaddr);
|
|
ioaddr = NULL;
|
|
}
|
|
if (!ioaddr)
|
|
return -ENODEV;
|
|
#else
|
|
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!irq || !mem)
|
|
return -ENODEV;
|
|
|
|
ioaddr = ioremap(mem->start, resource_size(mem));
|
|
dregs = (struct sun3_dma_regs *)(ioaddr + 8);
|
|
|
|
udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs));
|
|
if (!udc_regs) {
|
|
pr_err(PFX "couldn't allocate DVMA memory!\n");
|
|
iounmap(ioaddr);
|
|
return -ENOMEM;
|
|
}
|
|
#endif
|
|
|
|
sun3_scsi_regp = ioaddr;
|
|
|
|
instance = scsi_host_alloc(&sun3_scsi_template,
|
|
sizeof(struct NCR5380_hostdata));
|
|
if (!instance) {
|
|
error = -ENOMEM;
|
|
goto fail_alloc;
|
|
}
|
|
default_instance = instance;
|
|
|
|
instance->io_port = (unsigned long)ioaddr;
|
|
instance->irq = irq->start;
|
|
|
|
#ifdef SUPPORT_TAGS
|
|
host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
|
|
#endif
|
|
|
|
NCR5380_init(instance, host_flags);
|
|
|
|
error = request_irq(instance->irq, scsi_sun3_intr, 0,
|
|
"NCR5380", instance);
|
|
if (error) {
|
|
#ifdef REAL_DMA
|
|
pr_err(PFX "scsi%d: IRQ %d not free, bailing out\n",
|
|
instance->host_no, instance->irq);
|
|
goto fail_irq;
|
|
#else
|
|
pr_warn(PFX "scsi%d: IRQ %d not free, interrupts disabled\n",
|
|
instance->host_no, instance->irq);
|
|
instance->irq = NO_IRQ;
|
|
#endif
|
|
}
|
|
|
|
dregs->csr = 0;
|
|
udelay(SUN3_DMA_DELAY);
|
|
dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
|
|
udelay(SUN3_DMA_DELAY);
|
|
dregs->fifo_count = 0;
|
|
#ifdef SUN3_SCSI_VME
|
|
dregs->fifo_count_hi = 0;
|
|
dregs->dma_addr_hi = 0;
|
|
dregs->dma_addr_lo = 0;
|
|
dregs->dma_count_hi = 0;
|
|
dregs->dma_count_lo = 0;
|
|
|
|
dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
|
|
#endif
|
|
|
|
NCR5380_maybe_reset_bus(instance);
|
|
|
|
error = scsi_add_host(instance, NULL);
|
|
if (error)
|
|
goto fail_host;
|
|
|
|
platform_set_drvdata(pdev, instance);
|
|
|
|
scsi_scan_host(instance);
|
|
return 0;
|
|
|
|
fail_host:
|
|
if (instance->irq != NO_IRQ)
|
|
free_irq(instance->irq, instance);
|
|
fail_irq:
|
|
NCR5380_exit(instance);
|
|
scsi_host_put(instance);
|
|
fail_alloc:
|
|
if (udc_regs)
|
|
dvma_free(udc_regs);
|
|
iounmap(sun3_scsi_regp);
|
|
return error;
|
|
}
|
|
|
|
static int __exit sun3_scsi_remove(struct platform_device *pdev)
|
|
{
|
|
struct Scsi_Host *instance = platform_get_drvdata(pdev);
|
|
|
|
scsi_remove_host(instance);
|
|
if (instance->irq != NO_IRQ)
|
|
free_irq(instance->irq, instance);
|
|
NCR5380_exit(instance);
|
|
scsi_host_put(instance);
|
|
if (udc_regs)
|
|
dvma_free(udc_regs);
|
|
iounmap(sun3_scsi_regp);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sun3_scsi_driver = {
|
|
.remove = __exit_p(sun3_scsi_remove),
|
|
.driver = {
|
|
.name = DRV_MODULE_NAME,
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(sun3_scsi_driver, sun3_scsi_probe);
|
|
|
|
MODULE_ALIAS("platform:" DRV_MODULE_NAME);
|
|
MODULE_LICENSE("GPL");
|