mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-26 03:17:48 +00:00
f750ba9b8d
The following error is seen in some case when mounting rootfs from SD/MMC cards. Waiting for root device /dev/mmcblk0p1... mmc1: host does not support reading read-only switch. assuming write-enable. mmc1: new high speed SDHC card at address b368 mmcblk0: mmc1:b368 SDC 3.74 GiB mmcblk0: p1 mmc1: Timeout waiting for hardware interrupt. mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00 end_request: I/O error, dev mmcblk0, sector 3678225 Buffer I/O error on device mmcblk0p1, logical block 458754 lost page write due to I/O error on mmcblk0p1 This patch fixes the problem by lowering the usdhc clock and correcting watermark configuration. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
||
---|---|---|
.. | ||
at91_mci.c | ||
at91_mci.h | ||
atmel-mci-regs.h | ||
atmel-mci.c | ||
au1xmmc.c | ||
bfin_sdh.c | ||
cb710-mmc.c | ||
cb710-mmc.h | ||
davinci_mmc.c | ||
dw_mmc.c | ||
dw_mmc.h | ||
imxmmc.c | ||
imxmmc.h | ||
jz4740_mmc.c | ||
Kconfig | ||
Makefile | ||
mmc_spi.c | ||
mmci.c | ||
mmci.h | ||
msm_sdcc.c | ||
msm_sdcc.h | ||
mvsdio.c | ||
mvsdio.h | ||
mxcmmc.c | ||
mxs-mmc.c | ||
of_mmc_spi.c | ||
omap_hsmmc.c | ||
omap.c | ||
pxamci.c | ||
pxamci.h | ||
s3cmci.c | ||
s3cmci.h | ||
sdhci-cns3xxx.c | ||
sdhci-dove.c | ||
sdhci-esdhc-imx.c | ||
sdhci-esdhc.h | ||
sdhci-of-esdhc.c | ||
sdhci-of-hlwd.c | ||
sdhci-pci.c | ||
sdhci-pltfm.c | ||
sdhci-pltfm.h | ||
sdhci-pxav2.c | ||
sdhci-pxav3.c | ||
sdhci-s3c.c | ||
sdhci-spear.c | ||
sdhci-tegra.c | ||
sdhci.c | ||
sdhci.h | ||
sdricoh_cs.c | ||
sh_mmcif.c | ||
sh_mobile_sdhi.c | ||
tifm_sd.c | ||
tmio_mmc_dma.c | ||
tmio_mmc_pio.c | ||
tmio_mmc.c | ||
tmio_mmc.h | ||
ushc.c | ||
via-sdmmc.c | ||
vub300.c | ||
wbsd.c | ||
wbsd.h |