mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-21 08:53:41 +00:00
a9f6a0dd54
This converts the final 20 DEFINE_SPINLOCK holdouts. (another 580 places are already using DEFINE_SPINLOCK). Build tested on x86. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
382 lines
9.9 KiB
C
382 lines
9.9 KiB
C
/*
|
|
* QSpan pci routines.
|
|
* Most 8xx boards use the QSpan PCI bridge. The config address register
|
|
* is located 0x500 from the base of the bridge control/status registers.
|
|
* The data register is located at 0x504.
|
|
* This is a two step operation. First, the address register is written,
|
|
* then the data register is read/written as required.
|
|
* I don't know what to do about interrupts (yet).
|
|
*
|
|
* The RPX Classic implementation shares a chip select for normal
|
|
* PCI access and QSpan control register addresses. The selection is
|
|
* further selected by a bit setting in a board control register.
|
|
* Although it should happen, we disable interrupts during this operation
|
|
* to make sure some driver doesn't accidentally access the PCI while
|
|
* we have switched the chip select.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/mpc8xx.h>
|
|
#include <asm/system.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pci-bridge.h>
|
|
|
|
|
|
/*
|
|
* This blows......
|
|
* When reading the configuration space, if something does not respond
|
|
* the bus times out and we get a machine check interrupt. So, the
|
|
* good ol' exception tables come to mind to trap it and return some
|
|
* value.
|
|
*
|
|
* On an error we just return a -1, since that is what the caller wants
|
|
* returned if nothing is present. I copied this from __get_user_asm,
|
|
* with the only difference of returning -1 instead of EFAULT.
|
|
* There is an associated hack in the machine check trap code.
|
|
*
|
|
* The QSPAN is also a big endian device, that is it makes the PCI
|
|
* look big endian to us. This presents a problem for the Linux PCI
|
|
* functions, which assume little endian. For example, we see the
|
|
* first 32-bit word like this:
|
|
* ------------------------
|
|
* | Device ID | Vendor ID |
|
|
* ------------------------
|
|
* If we read/write as a double word, that's OK. But in our world,
|
|
* when read as a word, device ID is at location 0, not location 2 as
|
|
* the little endian PCI would believe. We have to switch bits in
|
|
* the PCI addresses given to us to get the data to/from the correct
|
|
* byte lanes.
|
|
*
|
|
* The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5.
|
|
* It always forces the MS bit to zero. Therefore, dev_fn values
|
|
* greater than 128 are returned as "no device found" errors.
|
|
*
|
|
* The QSPAN can only perform long word (32-bit) configuration cycles.
|
|
* The "offset" must have the two LS bits set to zero. Read operations
|
|
* require we read the entire word and then sort out what should be
|
|
* returned. Write operations other than long word require that we
|
|
* read the long word, update the proper word or byte, then write the
|
|
* entire long word back.
|
|
*
|
|
* PCI Bridge hack. We assume (correctly) that bus 0 is the primary
|
|
* PCI bus from the QSPAN. If we are called with a bus number other
|
|
* than zero, we create a Type 1 configuration access that a downstream
|
|
* PCI bridge will interpret.
|
|
*/
|
|
|
|
#define __get_qspan_pci_config(x, addr, op) \
|
|
__asm__ __volatile__( \
|
|
"1: "op" %0,0(%1)\n" \
|
|
" eieio\n" \
|
|
"2:\n" \
|
|
".section .fixup,\"ax\"\n" \
|
|
"3: li %0,-1\n" \
|
|
" b 2b\n" \
|
|
".section __ex_table,\"a\"\n" \
|
|
" .align 2\n" \
|
|
" .long 1b,3b\n" \
|
|
".text" \
|
|
: "=r"(x) : "r"(addr) : " %0")
|
|
|
|
#define QS_CONFIG_ADDR ((volatile uint *)(PCI_CSR_ADDR + 0x500))
|
|
#define QS_CONFIG_DATA ((volatile uint *)(PCI_CSR_ADDR + 0x504))
|
|
|
|
#define mk_config_addr(bus, dev, offset) \
|
|
(((bus)<<16) | ((dev)<<8) | (offset & 0xfc))
|
|
|
|
#define mk_config_type1(bus, dev, offset) \
|
|
mk_config_addr(bus, dev, offset) | 1;
|
|
|
|
static DEFINE_SPINLOCK(pcibios_lock);
|
|
|
|
int qspan_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn,
|
|
unsigned char offset, unsigned char *val)
|
|
{
|
|
uint temp;
|
|
u_char *cp;
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
unsigned long flags;
|
|
#endif
|
|
|
|
if ((bus > 7) || (dev_fn > 127)) {
|
|
*val = 0xff;
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
/* disable interrupts */
|
|
spin_lock_irqsave(&pcibios_lock, flags);
|
|
*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
|
|
eieio();
|
|
#endif
|
|
|
|
if (bus == 0)
|
|
*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
|
|
else
|
|
*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
|
|
__get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz");
|
|
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
|
|
eieio();
|
|
spin_unlock_irqrestore(&pcibios_lock, flags);
|
|
#endif
|
|
|
|
offset ^= 0x03;
|
|
cp = ((u_char *)&temp) + (offset & 0x03);
|
|
*val = *cp;
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
int qspan_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn,
|
|
unsigned char offset, unsigned short *val)
|
|
{
|
|
uint temp;
|
|
ushort *sp;
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
unsigned long flags;
|
|
#endif
|
|
|
|
if ((bus > 7) || (dev_fn > 127)) {
|
|
*val = 0xffff;
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
/* disable interrupts */
|
|
spin_lock_irqsave(&pcibios_lock, flags);
|
|
*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
|
|
eieio();
|
|
#endif
|
|
|
|
if (bus == 0)
|
|
*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
|
|
else
|
|
*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
|
|
__get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz");
|
|
offset ^= 0x02;
|
|
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
|
|
eieio();
|
|
spin_unlock_irqrestore(&pcibios_lock, flags);
|
|
#endif
|
|
|
|
sp = ((ushort *)&temp) + ((offset >> 1) & 1);
|
|
*val = *sp;
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
int qspan_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn,
|
|
unsigned char offset, unsigned int *val)
|
|
{
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
unsigned long flags;
|
|
#endif
|
|
|
|
if ((bus > 7) || (dev_fn > 127)) {
|
|
*val = 0xffffffff;
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
/* disable interrupts */
|
|
spin_lock_irqsave(&pcibios_lock, flags);
|
|
*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
|
|
eieio();
|
|
#endif
|
|
|
|
if (bus == 0)
|
|
*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
|
|
else
|
|
*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
|
|
__get_qspan_pci_config(*val, QS_CONFIG_DATA, "lwz");
|
|
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
|
|
eieio();
|
|
spin_unlock_irqrestore(&pcibios_lock, flags);
|
|
#endif
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
int qspan_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn,
|
|
unsigned char offset, unsigned char val)
|
|
{
|
|
uint temp;
|
|
u_char *cp;
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
unsigned long flags;
|
|
#endif
|
|
|
|
if ((bus > 7) || (dev_fn > 127))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp);
|
|
|
|
offset ^= 0x03;
|
|
cp = ((u_char *)&temp) + (offset & 0x03);
|
|
*cp = val;
|
|
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
/* disable interrupts */
|
|
spin_lock_irqsave(&pcibios_lock, flags);
|
|
*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
|
|
eieio();
|
|
#endif
|
|
|
|
if (bus == 0)
|
|
*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
|
|
else
|
|
*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
|
|
*QS_CONFIG_DATA = temp;
|
|
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
|
|
eieio();
|
|
spin_unlock_irqrestore(&pcibios_lock, flags);
|
|
#endif
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
int qspan_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn,
|
|
unsigned char offset, unsigned short val)
|
|
{
|
|
uint temp;
|
|
ushort *sp;
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
unsigned long flags;
|
|
#endif
|
|
|
|
if ((bus > 7) || (dev_fn > 127))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp);
|
|
|
|
offset ^= 0x02;
|
|
sp = ((ushort *)&temp) + ((offset >> 1) & 1);
|
|
*sp = val;
|
|
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
/* disable interrupts */
|
|
spin_lock_irqsave(&pcibios_lock, flags);
|
|
*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
|
|
eieio();
|
|
#endif
|
|
|
|
if (bus == 0)
|
|
*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
|
|
else
|
|
*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
|
|
*QS_CONFIG_DATA = temp;
|
|
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
|
|
eieio();
|
|
spin_unlock_irqrestore(&pcibios_lock, flags);
|
|
#endif
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
int qspan_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn,
|
|
unsigned char offset, unsigned int val)
|
|
{
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
unsigned long flags;
|
|
#endif
|
|
|
|
if ((bus > 7) || (dev_fn > 127))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
/* disable interrupts */
|
|
spin_lock_irqsave(&pcibios_lock, flags);
|
|
*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
|
|
eieio();
|
|
#endif
|
|
|
|
if (bus == 0)
|
|
*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
|
|
else
|
|
*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
|
|
*(unsigned int *)QS_CONFIG_DATA = val;
|
|
|
|
#ifdef CONFIG_RPXCLASSIC
|
|
*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
|
|
eieio();
|
|
spin_unlock_irqrestore(&pcibios_lock, flags);
|
|
#endif
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
int qspan_pcibios_find_device(unsigned short vendor, unsigned short dev_id,
|
|
unsigned short index, unsigned char *bus_ptr,
|
|
unsigned char *dev_fn_ptr)
|
|
{
|
|
int num, devfn;
|
|
unsigned int x, vendev;
|
|
|
|
if (vendor == 0xffff)
|
|
return PCIBIOS_BAD_VENDOR_ID;
|
|
vendev = (dev_id << 16) + vendor;
|
|
num = 0;
|
|
for (devfn = 0; devfn < 32; devfn++) {
|
|
qspan_pcibios_read_config_dword(0, devfn<<3, PCI_VENDOR_ID, &x);
|
|
if (x == vendev) {
|
|
if (index == num) {
|
|
*bus_ptr = 0;
|
|
*dev_fn_ptr = devfn<<3;
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
++num;
|
|
}
|
|
}
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
int qspan_pcibios_find_class(unsigned int class_code, unsigned short index,
|
|
unsigned char *bus_ptr, unsigned char *dev_fn_ptr)
|
|
{
|
|
int devnr, x, num;
|
|
|
|
num = 0;
|
|
for (devnr = 0; devnr < 32; devnr++) {
|
|
qspan_pcibios_read_config_dword(0, devnr<<3, PCI_CLASS_REVISION, &x);
|
|
if ((x>>8) == class_code) {
|
|
if (index == num) {
|
|
*bus_ptr = 0;
|
|
*dev_fn_ptr = devnr<<3;
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
++num;
|
|
}
|
|
}
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
void __init
|
|
m8xx_pcibios_fixup(void))
|
|
{
|
|
/* Lots to do here, all board and configuration specific. */
|
|
}
|
|
|
|
void __init
|
|
m8xx_setup_pci_ptrs(void))
|
|
{
|
|
set_config_access_method(qspan);
|
|
|
|
ppc_md.pcibios_fixup = m8xx_pcibios_fixup;
|
|
}
|
|
|