linux/arch/arm/mach-mx1/devices.c
Holger Schurig ccfe30a7c8 arm/imx2x: new IOMUX definitions
* removed iomux-mx1-mx2.h completely
* distributes the former contents to four different files (iomux-mx1.h,
  iomux-mx21.h, iomux-mx27.h and the file iomux-mx2x.h, which is common to
  both i.MX21 and i.MX27).
* adds all documented IOMUX definitions for i.MX21 and i.MX27
* fixes a few that were wrong (PD14_AOUT_FEC_CLR, PE16_AF_RTCK).
* don't silenly include <linux/io.h>
* and fixes all collateral damage from above

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13 10:33:44 +01:00

262 lines
5.8 KiB
C

/*
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
* Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
* Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
static struct resource imx_csi_resources[] = {
[0] = {
.start = 0x00224000,
.end = 0x00224010,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = CSI_INT,
.end = CSI_INT,
.flags = IORESOURCE_IRQ,
},
};
static u64 imx_csi_dmamask = 0xffffffffUL;
struct platform_device imx_csi_device = {
.name = "imx-csi",
.id = 0, /* This is used to put cameras on this interface */
.dev = {
.dma_mask = &imx_csi_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.resource = imx_csi_resources,
.num_resources = ARRAY_SIZE(imx_csi_resources),
};
static struct resource imx_i2c_resources[] = {
[0] = {
.start = 0x00217000,
.end = 0x00217010,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = I2C_INT,
.end = I2C_INT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_i2c_device = {
.name = "imx-i2c",
.id = 0,
.resource = imx_i2c_resources,
.num_resources = ARRAY_SIZE(imx_i2c_resources),
};
static struct resource imx_uart1_resources[] = {
[0] = {
.start = UART1_BASE_ADDR,
.end = UART1_BASE_ADDR + 0xD0,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = UART1_MINT_RX,
.end = UART1_MINT_RX,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = UART1_MINT_TX,
.end = UART1_MINT_TX,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = UART1_MINT_RTS,
.end = UART1_MINT_RTS,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_uart1_device = {
.name = "imx-uart",
.id = 0,
.num_resources = ARRAY_SIZE(imx_uart1_resources),
.resource = imx_uart1_resources,
};
static struct resource imx_uart2_resources[] = {
[0] = {
.start = UART2_BASE_ADDR,
.end = UART2_BASE_ADDR + 0xD0,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = UART2_MINT_RX,
.end = UART2_MINT_RX,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = UART2_MINT_TX,
.end = UART2_MINT_TX,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = UART2_MINT_RTS,
.end = UART2_MINT_RTS,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_uart2_device = {
.name = "imx-uart",
.id = 1,
.num_resources = ARRAY_SIZE(imx_uart2_resources),
.resource = imx_uart2_resources,
};
static struct resource imx_rtc_resources[] = {
[0] = {
.start = 0x00204000,
.end = 0x00204024,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = RTC_INT,
.end = RTC_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = RTC_SAMINT,
.end = RTC_SAMINT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_rtc_device = {
.name = "rtc-imx",
.id = 0,
.resource = imx_rtc_resources,
.num_resources = ARRAY_SIZE(imx_rtc_resources),
};
static struct resource imx_wdt_resources[] = {
[0] = {
.start = 0x00201000,
.end = 0x00201008,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = WDT_INT,
.end = WDT_INT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_wdt_device = {
.name = "imx-wdt",
.id = 0,
.resource = imx_wdt_resources,
.num_resources = ARRAY_SIZE(imx_wdt_resources),
};
static struct resource imx_usb_resources[] = {
[0] = {
.start = 0x00212000,
.end = 0x00212148,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = USBD_INT0,
.end = USBD_INT0,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = USBD_INT1,
.end = USBD_INT1,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = USBD_INT2,
.end = USBD_INT2,
.flags = IORESOURCE_IRQ,
},
[4] = {
.start = USBD_INT3,
.end = USBD_INT3,
.flags = IORESOURCE_IRQ,
},
[5] = {
.start = USBD_INT4,
.end = USBD_INT4,
.flags = IORESOURCE_IRQ,
},
[6] = {
.start = USBD_INT5,
.end = USBD_INT5,
.flags = IORESOURCE_IRQ,
},
[7] = {
.start = USBD_INT6,
.end = USBD_INT6,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_usb_device = {
.name = "imx_udc",
.id = 0,
.num_resources = ARRAY_SIZE(imx_usb_resources),
.resource = imx_usb_resources,
};
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
[0] = {
.chip.label = "gpio-0",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
.irq = GPIO_INT_PORTA,
.virtual_irq_start = MXC_GPIO_IRQ_START
},
[1] = {
.chip.label = "gpio-1",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
.irq = GPIO_INT_PORTB,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32
},
[2] = {
.chip.label = "gpio-2",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
.irq = GPIO_INT_PORTC,
.virtual_irq_start = MXC_GPIO_IRQ_START + 64
},
[3] = {
.chip.label = "gpio-3",
.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
.irq = GPIO_INT_PORTD,
.virtual_irq_start = MXC_GPIO_IRQ_START + 96
}
};
int __init mxc_register_gpios(void)
{
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
}