FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-26 19:36:41 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
a2b5d87784
linux/arch/ia64/kernel/minstate.h
Hidetoshi Seto b64f34cdfe [IA64] VIRT_CPU_ACCOUNTING (accurate cpu time accounting) 
This patch implements VIRT_CPU_ACCOUNTING for ia64,
which enable us to use more accurate cpu time accounting.

The VIRT_CPU_ACCOUNTING is an item of kernel config, which s390
and powerpc arch have.  By turning this config on, these archs
change the mechanism of cpu time accounting from tick-sampling
based one to state-transition based one.

The state-transition based accounting is done by checking time
(cycle counter in processor) at every state-transition point,
such as entrance/exit of kernel, interrupt, softirq etc.
The difference between point to point is the actual time consumed
during in the state. There is no doubt about that this value is
more accurate than that of tick-sampling based accounting.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-02-20 12:55:37 -08:00

212 lines
7.2 KiB
C
Raw Blame History

#include <asm/cache.h>
#include "entry.h"
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
/* read ar.itc in advance, and use it before leaving bank 0 */
#define ACCOUNT_GET_STAMP \
(pUStk) mov.m r20=ar.itc;
#define ACCOUNT_SYS_ENTER \
(pUStk) br.call.spnt rp=account_sys_enter \
;;
#else
#define ACCOUNT_GET_STAMP
#define ACCOUNT_SYS_ENTER
#endif
/*
* DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
* the minimum state necessary that allows us to turn psr.ic back
* on.
*
* Assumed state upon entry:
* psr.ic: off
* r31: contains saved predicates (pr)
*
* Upon exit, the state is as follows:
* psr.ic: off
* r2 = points to &pt_regs.r16
* r8 = contents of ar.ccv
* r9 = contents of ar.csd
* r10 = contents of ar.ssd
* r11 = FPSR_DEFAULT
* r12 = kernel sp (kernel virtual address)
* r13 = points to current task_struct (kernel virtual address)
* p15 = TRUE if psr.i is set in cr.ipsr
* predicate registers (other than p2, p3, and p15), b6, r3, r14, r15:
* preserved
*
* Note that psr.ic is NOT turned on by this macro. This is so that
* we can pass interruption state as arguments to a handler.
*/
#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA) \
mov r16=IA64_KR(CURRENT); /* M */ \
mov r27=ar.rsc; /* M */ \
mov r20=r1; /* A */ \
mov r25=ar.unat; /* M */ \
mov r29=cr.ipsr; /* M */ \
mov r26=ar.pfs; /* I */ \
mov r28=cr.iip; /* M */ \
mov r21=ar.fpsr; /* M */ \
COVER; /* B;; (or nothing) */ \
;; \
adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16; \
;; \
ld1 r17=[r16]; /* load current->thread.on_ustack flag */ \
st1 [r16]=r0; /* clear current->thread.on_ustack flag */ \
adds r1=-IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 \
/* switch from user to kernel RBS: */ \
;; \
invala; /* M */ \
SAVE_IFS; \
cmp.eq pKStk,pUStk=r0,r17; /* are we in kernel mode already? */ \
;; \
(pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \
;; \
(pUStk) mov.m r24=ar.rnat; \
(pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of RBS */ \
(pKStk) mov r1=sp; /* get sp */ \
;; \
(pUStk) lfetch.fault.excl.nt1 [r22]; \
(pUStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1; /* compute base of memory stack */ \
(pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \
;; \
(pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \
(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \
;; \
(pUStk) mov r18=ar.bsp; \
(pUStk) mov ar.rsc=0x3; /* set eager mode, pl 0, little-endian, loadrs=0 */ \
adds r17=2*L1_CACHE_BYTES,r1; /* really: biggest cache-line size */ \
adds r16=PT(CR_IPSR),r1; \
;; \
lfetch.fault.excl.nt1 [r17],L1_CACHE_BYTES; \
st8 [r16]=r29; /* save cr.ipsr */ \
;; \
lfetch.fault.excl.nt1 [r17]; \
tbit.nz p15,p0=r29,IA64_PSR_I_BIT; \
mov r29=b0 \
;; \
adds r16=PT(R8),r1; /* initialize first base pointer */ \
adds r17=PT(R9),r1; /* initialize second base pointer */ \
(pKStk) mov r18=r0; /* make sure r18 isn't NaT */ \
;; \
.mem.offset 0,0; st8.spill [r16]=r8,16; \
.mem.offset 8,0; st8.spill [r17]=r9,16; \
;; \
.mem.offset 0,0; st8.spill [r16]=r10,24; \
.mem.offset 8,0; st8.spill [r17]=r11,24; \
;; \
st8 [r16]=r28,16; /* save cr.iip */ \
st8 [r17]=r30,16; /* save cr.ifs */ \
(pUStk) sub r18=r18,r22; /* r18=RSE.ndirty*8 */ \
mov r8=ar.ccv; \
mov r9=ar.csd; \
mov r10=ar.ssd; \
movl r11=FPSR_DEFAULT; /* L-unit */ \
;; \
st8 [r16]=r25,16; /* save ar.unat */ \
st8 [r17]=r26,16; /* save ar.pfs */ \
shl r18=r18,16; /* compute ar.rsc to be used for "loadrs" */ \
;; \
st8 [r16]=r27,16; /* save ar.rsc */ \
(pUStk) st8 [r17]=r24,16; /* save ar.rnat */ \
(pKStk) adds r17=16,r17; /* skip over ar_rnat field */ \
;; /* avoid RAW on r16 & r17 */ \
(pUStk) st8 [r16]=r23,16; /* save ar.bspstore */ \
st8 [r17]=r31,16; /* save predicates */ \
(pKStk) adds r16=16,r16; /* skip over ar_bspstore field */ \
;; \
st8 [r16]=r29,16; /* save b0 */ \
st8 [r17]=r18,16; /* save ar.rsc value for "loadrs" */ \
cmp.eq pNonSys,pSys=r0,r0 /* initialize pSys=0, pNonSys=1 */ \
;; \
.mem.offset 0,0; st8.spill [r16]=r20,16; /* save original r1 */ \
.mem.offset 8,0; st8.spill [r17]=r12,16; \
adds r12=-16,r1; /* switch to kernel memory stack (with 16 bytes of scratch) */ \
;; \
.mem.offset 0,0; st8.spill [r16]=r13,16; \
.mem.offset 8,0; st8.spill [r17]=r21,16; /* save ar.fpsr */ \
mov r13=IA64_KR(CURRENT); /* establish `current' */ \
;; \
.mem.offset 0,0; st8.spill [r16]=r15,16; \
.mem.offset 8,0; st8.spill [r17]=r14,16; \
;; \
.mem.offset 0,0; st8.spill [r16]=r2,16; \
.mem.offset 8,0; st8.spill [r17]=r3,16; \
ACCOUNT_GET_STAMP \
adds r2=IA64_PT_REGS_R16_OFFSET,r1; \
;; \
EXTRA; \
movl r1=__gp; /* establish kernel global pointer */ \
;; \
ACCOUNT_SYS_ENTER \
bsw.1; /* switch back to bank 1 (must be last in insn group) */ \
;;
/*
* SAVE_REST saves the remainder of pt_regs (with psr.ic on).
*
* Assumed state upon entry:
* psr.ic: on
* r2: points to &pt_regs.r16
* r3: points to &pt_regs.r17
* r8: contents of ar.ccv
* r9: contents of ar.csd
* r10: contents of ar.ssd
* r11: FPSR_DEFAULT
*
* Registers r14 and r15 are guaranteed not to be touched by SAVE_REST.
*/
#define SAVE_REST \
.mem.offset 0,0; st8.spill [r2]=r16,16; \
.mem.offset 8,0; st8.spill [r3]=r17,16; \
;; \
.mem.offset 0,0; st8.spill [r2]=r18,16; \
.mem.offset 8,0; st8.spill [r3]=r19,16; \
;; \
.mem.offset 0,0; st8.spill [r2]=r20,16; \
.mem.offset 8,0; st8.spill [r3]=r21,16; \
mov r18=b6; \
;; \
.mem.offset 0,0; st8.spill [r2]=r22,16; \
.mem.offset 8,0; st8.spill [r3]=r23,16; \
mov r19=b7; \
;; \
.mem.offset 0,0; st8.spill [r2]=r24,16; \
.mem.offset 8,0; st8.spill [r3]=r25,16; \
;; \
.mem.offset 0,0; st8.spill [r2]=r26,16; \
.mem.offset 8,0; st8.spill [r3]=r27,16; \
;; \
.mem.offset 0,0; st8.spill [r2]=r28,16; \
.mem.offset 8,0; st8.spill [r3]=r29,16; \
;; \
.mem.offset 0,0; st8.spill [r2]=r30,16; \
.mem.offset 8,0; st8.spill [r3]=r31,32; \
;; \
mov ar.fpsr=r11; /* M-unit */ \
st8 [r2]=r8,8; /* ar.ccv */ \
adds r24=PT(B6)-PT(F7),r3; \
;; \
stf.spill [r2]=f6,32; \
stf.spill [r3]=f7,32; \
;; \
stf.spill [r2]=f8,32; \
stf.spill [r3]=f9,32; \
;; \
stf.spill [r2]=f10; \
stf.spill [r3]=f11; \
adds r25=PT(B7)-PT(F11),r3; \
;; \
st8 [r24]=r18,16; /* b6 */ \
st8 [r25]=r19,16; /* b7 */ \
;; \
st8 [r24]=r9; /* ar.csd */ \
st8 [r25]=r10; /* ar.ssd */ \
;;
#define SAVE_MIN_WITH_COVER DO_SAVE_MIN(cover, mov r30=cr.ifs,)
#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19)
#define SAVE_MIN DO_SAVE_MIN( , mov r30=r0, )
Reference in New Issue View Git Blame Copy Permalink