FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2025-01-16 22:51:32 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-omap2
History
Balaji T K 1fcecf281b ARM: OMAP4: MMC: increase delay for pbias 
4 micro seconds is not enough for PBIAS if MMC regulator is
enabled from MMC regulator OFF.
Increase the delay for PBIAS to stabilize.
Wait for PBIAS and timeout if not.

Resolves MMC/SD failure on OMAP4
"Pbias Voltage is not same as LDO"

Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by:  Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-01 04:48:15 -07:00
..
include/mach
Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linux
2011-05-24 15:35:54 +09:00
board-2430sdp.c
ARM: OMAP2: Add missing include of linux/gpio.h
2011-05-31 06:17:01 -07:00
board-3430sdp.c
OMAP2+: Fix 9 section mismatch(es) warnings from mach-omap2/built-in.o
2011-05-31 06:17:02 -07:00
board-3630sdp.c
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-03-17 19:28:15 -07:00
board-4430sdp.c
ARM: OMAP4: MMC: no regulator off during probe for eMMC
2011-06-01 02:25:04 -07:00
board-am3517crane.c
arm: omap2plus: GPIO cleanup
2011-05-12 02:52:06 -07:00
board-am3517evm.c
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-05-26 12:11:54 -07:00
board-apollon.c
ARM: OMAP2: Add missing include of linux/gpio.h
2011-05-31 06:17:01 -07:00
board-cm-t35.c
arm: omap2plus: move NAND_BLOCK_SIZE out of boards
2011-06-01 02:25:05 -07:00
board-cm-t3517.c
arm: omap2plus: move NAND_BLOCK_SIZE out of boards
2011-06-01 02:25:05 -07:00
board-devkit8000.c
arm: omap2plus: move NAND_BLOCK_SIZE out of boards
2011-06-01 02:25:05 -07:00
board-flash.c
omap: Fix compile if MTD_NAND_OMAP2 is not selected
2011-02-25 10:19:21 -08:00
board-flash.h
omap3630: nand: fix device size to work in polled mode
2011-02-17 15:32:52 -08:00
board-generic.c
omap2+: Minimize board specific init_early calls
2011-02-25 10:19:21 -08:00
board-h4.c
omap: Fix H4 init_irq to not call h4_init_flash
2011-03-10 09:51:29 -08:00
board-igep0020.c
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-05-26 12:11:54 -07:00
board-ldp.c
omap: musb: introduce default board config
2011-05-09 08:15:31 -07:00
board-n8x0.c
arm: omap2plus: GPIO cleanup
2011-05-12 02:52:06 -07:00
board-omap3beagle.c
arm: omap2plus: move NAND_BLOCK_SIZE out of boards
2011-06-01 02:25:05 -07:00
board-omap3evm.c
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-05-26 12:11:54 -07:00
board-omap3logic.c
omap: use common initialization for PMIC i2c bus
2011-05-03 02:51:45 -07:00
board-omap3pandora.c
arm: omap2plus: move NAND_BLOCK_SIZE out of boards
2011-06-01 02:25:05 -07:00
board-omap3stalker.c
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-05-26 12:11:54 -07:00
board-omap3touchbook.c
arm: omap2plus: move NAND_BLOCK_SIZE out of boards
2011-06-01 02:25:05 -07:00
board-omap4panda.c
ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init
2011-06-01 02:25:04 -07:00
board-overo.c
arm: omap2plus: move NAND_BLOCK_SIZE out of boards
2011-06-01 02:25:05 -07:00
board-rm680.c
omap: musb: introduce default board config
2011-05-09 08:15:31 -07:00
board-rx51-peripherals.c
omap: rx51: Don't power up speaker amplifier at bootup
2011-06-01 02:25:05 -07:00
board-rx51-video.c
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-05-26 12:11:54 -07:00
board-rx51.c
OMAP3: clean-up mach specific cpuidle data structures
2011-05-20 17:15:53 +02:00
board-ti8168evm.c
omap2+: Minimize board specific init_early calls
2011-02-25 10:19:21 -08:00
board-zoom-debugboard.c
arm: omap2plus: GPIO cleanup
2011-05-12 02:52:06 -07:00
board-zoom-display.c
OMAP2+: Fix 9 section mismatch(es) warnings from mach-omap2/built-in.o
2011-05-31 06:17:02 -07:00
board-zoom-peripherals.c
arm: omap2plus: GPIO cleanup
2011-05-12 02:52:06 -07:00
board-zoom.c
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-03-17 19:28:15 -07:00
clkt2xxx_apll.c
OMAP2xxx: clock: add clockfw autoidle support for APLLs
2011-03-07 20:02:13 -07:00
clkt2xxx_dpll.c
OMAP2: clock: add DPLL autoidle support
2011-03-07 20:02:05 -07:00
clkt2xxx_dpllcore.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c
OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control
2011-03-07 20:02:21 -07:00
clkt2xxx_sys.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
clkt34xx_dpll3m2.c
OMAP3: set the core dpll clk rate in its set_rate function
2011-05-13 07:08:18 -07:00
clkt_clksel.c
arm: omap2: clksel: fix compile warningOrganization: Texas Instruments\n
2011-02-16 17:49:35 -08:00
clkt_dpll.c
Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024
2011-03-10 22:41:28 -07:00
clkt_iclk.c
OMAP2430/3xxx: clock: add modem clock autoidle support
2011-03-07 20:03:12 -07:00
clock2xxx.c
OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
2010-02-24 17:45:15 -07:00
clock2xxx.h
OMAP: clock: fix compile warning
2011-03-09 18:44:28 -07:00
clock3xxx_data.c
Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linux
2011-03-22 14:27:36 +09:00
clock3xxx.c
OMAP2+: clock: disable autoidle on all clocks during clock init
2011-02-25 16:10:42 -07:00
clock3xxx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock34xx.c
OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks
2011-03-07 20:04:03 -07:00
clock34xx.h
OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks
2011-03-07 20:04:03 -07:00
clock36xx.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock36xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock44xx_data.c
OMAP4: clock data: Change DSS clock aliases
2011-04-20 12:43:56 -06:00
clock44xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock2420_data.c
Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linux
2011-03-22 14:27:36 +09:00
clock2430_data.c
Merge branch 'for-paul' of git://gitorious.org/linux-omap-dss2/linux
2011-03-22 14:27:36 +09:00
clock2430.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clock3517.c
OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks
2011-03-07 20:04:03 -07:00
clock3517.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock_common_data.c
OMAP2xxx: clock: remove dsp_irate_ick
2011-03-07 20:21:17 -07:00
clock.c
perf: add OMAP support for the new power events
2011-03-11 07:21:44 -08:00
clock.h
OMAP2xxx: clock: remove dsp_irate_ick
2011-03-07 20:21:17 -07:00
clockdomain2xxx_3xxx.c
OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable
2011-02-25 16:06:48 -07:00
clockdomain44xx.c
OMAP4: clockdomain: Add wkup/sleep dependency support
2011-02-25 16:09:05 -07:00
clockdomain.c
Fix common misspellings
2011-03-31 11:26:23 -03:00
clockdomain.h
Fix common misspellings
2011-03-31 11:26:23 -03:00
clockdomains2xxx_3xxx_data.c
omap2/3: clockdomains: fix compile-time warnings
2011-03-07 20:21:17 -07:00
clockdomains44xx_data.c
Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024
2011-03-10 22:41:28 -07:00
cm1_44xx.h
OMAP4: CM instances: add clockdomain register offsets
2010-12-21 21:05:15 -07:00
cm2_44xx.h
OMAP4: CM instances: add clockdomain register offsets
2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.c
OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL
2011-04-20 12:43:56 -06:00
cm2xxx_3xxx.h
OMAP2xxx: clock: add clockfw autoidle support for APLLs
2011-03-07 20:02:13 -07:00
cm44xx.c
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
cm44xx.h
OMAP4: clockdomain: Add wkup/sleep dependency support
2011-02-25 16:09:05 -07:00
cm-regbits-24xx.h
OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks
2011-03-07 20:02:57 -07:00
cm-regbits-34xx.h
OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support
2010-12-21 21:05:15 -07:00
cm-regbits-44xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
cm.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
cminst44xx.c
OMAP4: CM: Add CM accesor api for bitwise control
2011-02-25 16:09:05 -07:00
cminst44xx.h
OMAP4: CM: Add CM accesor api for bitwise control
2011-02-25 16:09:05 -07:00
common-board-devices.c
arm: omap2plus: fix ads7846 pendown gpio request
2011-06-01 02:25:04 -07:00
common-board-devices.h
arm: omap2plus: move NAND_BLOCK_SIZE out of boards
2011-06-01 02:25:05 -07:00
common.c
Merge branch 'for_2.6.39/pm-misc' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2011-03-10 18:54:14 -08:00
control.c
OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL
2011-04-20 12:43:56 -06:00
control.h
treewide: fix a few typos in comments
2011-05-10 10:16:21 +02:00
cpuidle34xx.c
OMAP3: cpuidle: change the power domains modes determination logic
2011-05-20 17:15:54 +02:00
devices.c
OMAP4: fix return value of omap4_l3_init
2011-06-01 02:25:04 -07:00
devices.h
[media] omap3: Add function to register omap3isp platform device structure
2011-03-22 04:53:42 -03:00
display.c
OMAP2PLUS: DSS2: Clean up omap_display_init()
2011-05-11 14:20:11 +03:00
dma.c
Fix common misspellings
2011-03-31 11:26:23 -03:00
dpll3xxx.c
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-01-06 19:13:58 -08:00
dpll44xx.c
omap4: dpll: Enable auto gate control for all MX postdividers
2011-02-25 16:10:17 -07:00
dsp.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
emu.c
omap2/3: Fix initcalls for multi-omap
2010-02-15 09:27:05 -08:00
gpio.c
Fix common misspellings
2011-03-31 11:26:23 -03:00
gpmc-nand.c
omap3630: nand: fix device size to work in polled mode
2011-02-17 15:32:52 -08:00
gpmc-onenand.c
OMAP: OneNAND: let boards determine OneNAND frequency
2011-02-17 15:44:46 -08:00
gpmc-smc91x.c
arm: omap2plus: GPIO cleanup
2011-05-12 02:52:06 -07:00
gpmc-smsc911x.c
arm: omap2plus: GPIO cleanup
2011-05-12 02:52:06 -07:00
gpmc.c
arm: Cleanup the irq namespace
2011-03-29 14:47:57 +02:00
hsmmc.c
ARM: OMAP4: MMC: increase delay for pbias
2011-06-01 04:48:15 -07:00
hsmmc.h
ARM: OMAP4: MMC: no regulator off during probe for eMMC
2011-06-01 02:25:04 -07:00
hwspinlock.c
omap: add hwspinlock device
2011-02-17 09:52:43 -08:00
i2c.c
omap: mux: Convert 2420 platform init code to use new mux code
2010-07-05 16:31:40 +03:00
id.c
OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
2011-03-14 11:12:54 -07:00
io.c
Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024
2011-03-10 22:41:28 -07:00
io.h
OMAP: plat-omap: Fix static function warnings
2010-10-08 10:12:38 -07:00
iommu2.c
omap: IOMMU: add support to callback during fault handling
2011-02-24 14:23:17 -08:00
irq.c
arm: omap2/3: Use generic irq chip
2011-05-16 02:28:58 -07:00
Kconfig
omap: drop board-igep0030.c
2011-05-17 03:31:24 -07:00
mailbox.c
Merge branch 'for_2.6.39/pm-misc' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2011-03-10 18:54:14 -08:00
Makefile
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-05-26 12:11:54 -07:00
Makefile.boot
…
mcbsp.c
Fix common misspellings
2011-03-31 11:26:23 -03:00
mux34xx.c
omap3|4: mux: make local structures static
2011-01-06 19:58:28 -08:00
mux34xx.h
omap: mux: Add 36xx CBP package support
2009-12-11 16:16:33 -08:00
mux44xx.c
ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init
2011-06-01 02:25:04 -07:00
mux44xx.h
OMAP4: mux: Add CBS package data for OMAP4430 ES2
2010-11-17 12:01:52 +01:00
mux2420.c
OMAP: mux: Add __func__ macro to pr_xxx macros
2010-11-17 12:01:54 +01:00
mux2420.h
omap: mux: Add data for 2420
2010-07-05 16:31:36 +03:00
mux2430.c
OMAP: mux: Add __func__ macro to pr_xxx macros
2010-11-17 12:01:54 +01:00
mux2430.h
Fix common misspellings
2011-03-31 11:26:23 -03:00
mux.c
ARM: omap2+: mux: Allow board mux settings to be NULL
2011-06-01 02:25:04 -07:00
mux.h
ARM: omap4: Pass core and wakeup mux tables to omap4_mux_init
2011-06-01 02:25:04 -07:00
omap4-common.c
ARM: 6755/1: omap4: l2x0: Populate set_debug() function and enable Errata 727915
2011-03-09 00:18:47 +00:00
omap44xx-smc.S
ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL
2011-03-09 16:38:36 -08:00
omap_hwmod_3xxx_data.c
OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.
2011-04-20 12:43:56 -06:00
omap_hwmod_44xx_data.c
omap4: hwmod: Enable the keypad
2011-06-01 02:25:05 -07:00
omap_hwmod_2420_data.c
OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.
2011-04-20 12:43:56 -06:00
omap_hwmod_2430_data.c
OMAP2/3: hwmod: fix gpio-reset timeouts seen during bootup.
2011-04-20 12:43:56 -06:00
omap_hwmod_common_data.c
OMAP: hwmod data: add class for IVA hwmods
2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h
OMAP: hwmod data: add class for IVA hwmods
2010-07-26 16:34:31 -06:00
omap_hwmod.c
OMAP2+: mux: fix compilation warnings
2011-06-01 00:16:04 -07:00
omap_l3_noc.c
OMAP3/4: l3: minor cleanup for parenthesis and extra spaces
2011-05-03 02:38:01 -07:00
omap_l3_noc.h
OMAP4: l3: Introduce l3-interconnect error handling driver
2011-03-09 17:23:58 +05:30
omap_l3_smx.c
Merge branches 'devel-fixes', 'devel-cleanup' and 'devel-genirq' into for-next
2011-05-17 03:44:50 -07:00
omap_l3_smx.h
OMAP3: l3: Introduce l3-interconnect error handling driver
2011-03-09 17:23:57 +05:30
omap_opp_data.h
OMAP2+: voltage: reorganize, split code from data
2011-03-10 22:17:45 -07:00
omap_phy_internal.c
ARM: OMAP2: Add missing iounmap in omap4430_phy_init
2011-06-01 02:25:04 -07:00
omap_twl.c
Fix common misspellings
2011-03-31 11:26:23 -03:00
omap-headsmp.S
ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL
2011-03-09 16:38:36 -08:00
omap-hotplug.c
ARM: CPU hotplug: remove bug checks in platform_cpu_die()
2010-12-20 15:09:10 +00:00
omap-iommu.c
OMAP: iommu: make iva2 iommu selectable
2010-12-15 11:33:31 -06:00
omap-smp.c
ARM: consolidate SMP cross call implementation
2011-05-23 16:53:17 +01:00
opp2xxx.h
omap: Start using CONFIG_SOC_OMAP
2011-01-27 16:39:40 -08:00
opp3xxx_data.c
Merge branch 'for_2.6.39/pm-integration' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2011-03-11 09:39:58 -08:00
opp4xxx_data.c
Merge branch 'for_2.6.39/pm-integration' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2011-03-11 09:39:58 -08:00
opp2420_data.c
OMAP2xxx OPP: clean up comments in OPP data
2010-01-08 15:23:15 -07:00
opp2430_data.c
OMAP2xxx OPP: clean up comments in OPP data
2010-01-08 15:23:15 -07:00
opp.c
omap: opp: add OMAP3 OPP table data and common init
2010-12-21 14:30:40 -08:00
pm24xx.c
Merge branch 'integration-2.6.39-for-tony' of git://git.pwsan.com/linux-integration into omap-for-linus
2011-03-11 09:20:03 -08:00
pm34xx.c
OMAP3: PM: Boot message is not an error, and not helpful, remove it
2011-05-20 17:15:54 +02:00
pm44xx.c
OMAP4: PM: remove redundant #ifdef CONFIG_PM
2011-05-03 02:38:03 -07:00
pm-debug.c
mach-omap2: pm: world-writable debugfs timer files
2011-02-04 12:08:12 -08:00
pm.c
OMAP4: Intialize IVA Device in addition to DSP device.
2011-04-26 02:45:32 -07:00
pm.h
OMAP3: cpuidle: change the power domains modes determination logic
2011-05-20 17:15:54 +02:00
powerdomain2xxx_3xxx.c
OMAP: PRCM: remove duplicated headers
2011-01-18 12:36:53 -07:00
powerdomain44xx.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomain-common.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomain.c
Fix common misspellings
2011-03-31 11:26:23 -03:00
powerdomain.h
Fix common misspellings
2011-03-31 11:26:23 -03:00
powerdomains2xxx_3xxx_data.c
OMAP2+: powerdomain: fix bank power state bitfields
2011-03-07 19:28:15 -07:00
powerdomains2xxx_3xxx_data.h
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c
Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024
2011-03-10 22:41:28 -07:00
powerdomains3xxx_data.c
Fix common misspellings
2011-03-31 11:26:23 -03:00
powerdomains44xx_data.c
OMAP2+: powerdomain: fix bank power state bitfields
2011-03-07 19:28:15 -07:00
prcm44xx.h
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
prcm_mpu44xx.h
omap4: clockdomain: Fix the CPUx domain name
2011-03-01 16:36:20 -07:00
prcm-common.h
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
prcm.c
ARM: OMAP: Allow platforms to hook reset cleanly
2011-01-27 16:39:48 -08:00
prm2xxx_3xxx.c
OMAP2+: hwmod: use status bit info for reset line
2011-03-10 03:23:56 -07:00
prm2xxx_3xxx.h
OMAP2+: hwmod: use status bit info for reset line
2011-03-10 03:23:56 -07:00
prm44xx.c
OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file
2010-12-21 21:05:14 -07:00
prm44xx.h
OMAP4: CM instances: add clockdomain register offsets
2010-12-21 21:05:15 -07:00
prm-regbits-24xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prm-regbits-34xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prm.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prminst44xx.c
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
prminst44xx.h
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
scrm44xx.h
OMAP4: PRCM: Add SCRM header file
2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h
omap3: zoom: Introduce zoom3 board support
2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdram-nokia.c
arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data
2010-12-17 15:13:46 -08:00
sdram-nokia.h
arm: omap: add sdram-nokia.h
2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h
omap3: SDRC: add timing data for Numonyx M65KxxxxAM
2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdrc2xxx.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
sdrc.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
sdrc.h
OMAP2+: use global values for the SRAM PA addresses
2010-12-21 14:45:56 -08:00
serial.c
OMAP2+: hwmod: rename some init functions
2011-02-28 12:04:35 -07:00
sleep24xx.S
ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAM
2011-02-04 14:26:08 +00:00
sleep34xx.S
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-03-17 19:28:15 -07:00
smartreflex-class3.c
OMAP: smartreflex: move plat/smartreflex.h to mach-omap2/smartreflex.h
2011-03-07 20:05:08 -07:00
smartreflex.c
OMAP3+: smartreflex: delete debugfs entries on probe error
2011-05-03 02:38:03 -07:00
smartreflex.h
OMAP: voltage: move plat/voltage.h to mach-omap2/voltage.h
2011-03-07 20:05:08 -07:00
sr_device.c
OMAP: voltage: move plat/voltage.h to mach-omap2/voltage.h
2011-03-07 20:05:08 -07:00
sram34xx.S
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-03-17 19:28:15 -07:00
sram242x.S
ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAM
2011-02-04 14:26:08 +00:00
sram243x.S
ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAM
2011-02-04 14:26:08 +00:00
timer-gp.c
Merge branch 'devel-cleanup' into omap-for-linus
2011-03-02 17:07:14 -08:00
timer-gp.h
OMAP2plus: Fix static function warnings
2010-10-08 10:02:49 -07:00
timer-mpu.c
ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception
2011-02-23 17:54:55 +00:00
usb-fs.c
OMAP: control: move plat-omap/control.h to mach-omap2/control.h
2010-10-08 11:40:20 -06:00
usb-host.c
arm: omap: usb: cleanup ehci and ohci resources and devices
2011-03-01 17:02:44 +02:00
usb-musb.c
Merge branch 'for-tony' of master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb into omap-for-linus
2011-05-24 00:04:49 -07:00
usb-tusb6010.c
arm: omap2plus: GPIO cleanup
2011-05-12 02:52:06 -07:00
vc3xxx_data.c
OMAP2+: voltage: reorganize, split code from data
2011-03-10 22:17:45 -07:00
vc44xx_data.c
OMAP2+: voltage: reorganize, split code from data
2011-03-10 22:17:45 -07:00
vc.h
OMAP2+: voltage: reorganize, split code from data
2011-03-10 22:17:45 -07:00
voltage.c
Merge branches 'devel-fixes', 'devel-cleanup' and 'devel-genirq' into for-next
2011-05-17 03:44:50 -07:00
voltage.h
OMAP2+: voltage: reorganize, split code from data
2011-03-10 22:17:45 -07:00
voltagedomains3xxx_data.c
OMAP2+: voltage: reorganize, split code from data
2011-03-10 22:17:45 -07:00
voltagedomains44xx_data.c
OMAP2+: voltage: reorganize, split code from data
2011-03-10 22:17:45 -07:00
vp3xxx_data.c
OMAP2+: voltage: reorganize, split code from data
2011-03-10 22:17:45 -07:00
vp44xx_data.c
OMAP2+: voltage: reorganize, split code from data
2011-03-10 22:17:45 -07:00
vp.h
OMAP2+: voltage: reorganize, split code from data
2011-03-10 22:17:45 -07:00
wd_timer.c
omap2+: wdt: trivial sparse fixes
2011-01-06 19:58:28 -08:00
wd_timer.h
OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c
2010-12-21 19:56:17 -07:00