mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-25 02:48:21 +00:00
3269711b76
They are all only calling i2c_del_adapter, so we may as well do it directly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
204 lines
5.2 KiB
C
204 lines
5.2 KiB
C
/*
|
|
i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
monitoring
|
|
Copyright (C) 1998-2003 The LM Sensors Team
|
|
Alexander Wold <awold@bigfoot.com>
|
|
Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
|
|
Based on i2c-voodoo3.c.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/* This interfaces to the I2C bus of the Savage4 to gain access to
|
|
the BT869 and possibly other I2C devices. The DDC bus is not
|
|
yet supported because its register is not memory-mapped.
|
|
However we leave the DDC code here, commented out, to make
|
|
it easier to add later.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
#include <asm/io.h>
|
|
|
|
/* 3DFX defines */
|
|
#define PCI_CHIP_SAVAGE3D 0x8A20
|
|
#define PCI_CHIP_SAVAGE3D_MV 0x8A21
|
|
#define PCI_CHIP_SAVAGE4 0x8A22
|
|
#define PCI_CHIP_SAVAGE2000 0x9102
|
|
#define PCI_CHIP_PROSAVAGE_PM 0x8A25
|
|
#define PCI_CHIP_PROSAVAGE_KM 0x8A26
|
|
#define PCI_CHIP_SAVAGE_MX_MV 0x8c10
|
|
#define PCI_CHIP_SAVAGE_MX 0x8c11
|
|
#define PCI_CHIP_SAVAGE_IX_MV 0x8c12
|
|
#define PCI_CHIP_SAVAGE_IX 0x8c13
|
|
|
|
#define REG 0xff20 /* Serial Port 1 Register */
|
|
|
|
/* bit locations in the register */
|
|
#define DDC_ENAB 0x00040000
|
|
#define DDC_SCL_OUT 0x00080000
|
|
#define DDC_SDA_OUT 0x00100000
|
|
#define DDC_SCL_IN 0x00200000
|
|
#define DDC_SDA_IN 0x00400000
|
|
#define I2C_ENAB 0x00000020
|
|
#define I2C_SCL_OUT 0x00000001
|
|
#define I2C_SDA_OUT 0x00000002
|
|
#define I2C_SCL_IN 0x00000008
|
|
#define I2C_SDA_IN 0x00000010
|
|
|
|
/* initialization states */
|
|
#define INIT2 0x20
|
|
#define INIT3 0x04
|
|
|
|
/* delays */
|
|
#define CYCLE_DELAY 10
|
|
#define TIMEOUT (HZ / 2)
|
|
|
|
|
|
static void __iomem *ioaddr;
|
|
|
|
/* The sav GPIO registers don't have individual masks for each bit
|
|
so we always have to read before writing. */
|
|
|
|
static void bit_savi2c_setscl(void *data, int val)
|
|
{
|
|
unsigned int r;
|
|
r = readl(ioaddr + REG);
|
|
if(val)
|
|
r |= I2C_SCL_OUT;
|
|
else
|
|
r &= ~I2C_SCL_OUT;
|
|
writel(r, ioaddr + REG);
|
|
readl(ioaddr + REG); /* flush posted write */
|
|
}
|
|
|
|
static void bit_savi2c_setsda(void *data, int val)
|
|
{
|
|
unsigned int r;
|
|
r = readl(ioaddr + REG);
|
|
if(val)
|
|
r |= I2C_SDA_OUT;
|
|
else
|
|
r &= ~I2C_SDA_OUT;
|
|
writel(r, ioaddr + REG);
|
|
readl(ioaddr + REG); /* flush posted write */
|
|
}
|
|
|
|
/* The GPIO pins are open drain, so the pins always remain outputs.
|
|
We rely on the i2c-algo-bit routines to set the pins high before
|
|
reading the input from other chips. */
|
|
|
|
static int bit_savi2c_getscl(void *data)
|
|
{
|
|
return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
|
|
}
|
|
|
|
static int bit_savi2c_getsda(void *data)
|
|
{
|
|
return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
|
|
}
|
|
|
|
/* Configures the chip */
|
|
|
|
static int config_s4(struct pci_dev *dev)
|
|
{
|
|
unsigned long cadr;
|
|
|
|
/* map memory */
|
|
cadr = dev->resource[0].start;
|
|
cadr &= PCI_BASE_ADDRESS_MEM_MASK;
|
|
ioaddr = ioremap_nocache(cadr, 0x0080000);
|
|
if (ioaddr) {
|
|
/* writel(0x8160, ioaddr + REG2); */
|
|
writel(0x00000020, ioaddr + REG);
|
|
dev_info(&dev->dev, "Using Savage4 at %p\n", ioaddr);
|
|
return 0;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static struct i2c_algo_bit_data sav_i2c_bit_data = {
|
|
.setsda = bit_savi2c_setsda,
|
|
.setscl = bit_savi2c_setscl,
|
|
.getsda = bit_savi2c_getsda,
|
|
.getscl = bit_savi2c_getscl,
|
|
.udelay = CYCLE_DELAY,
|
|
.timeout = TIMEOUT
|
|
};
|
|
|
|
static struct i2c_adapter savage4_i2c_adapter = {
|
|
.owner = THIS_MODULE,
|
|
.name = "I2C Savage4 adapter",
|
|
.algo_data = &sav_i2c_bit_data,
|
|
};
|
|
|
|
static struct pci_device_id savage4_ids[] __devinitdata = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000) },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE (pci, savage4_ids);
|
|
|
|
static int __devinit savage4_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
int retval;
|
|
|
|
retval = config_s4(dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/* set up the sysfs linkage to our parent device */
|
|
savage4_i2c_adapter.dev.parent = &dev->dev;
|
|
|
|
return i2c_bit_add_bus(&savage4_i2c_adapter);
|
|
}
|
|
|
|
static void __devexit savage4_remove(struct pci_dev *dev)
|
|
{
|
|
i2c_del_adapter(&savage4_i2c_adapter);
|
|
iounmap(ioaddr);
|
|
}
|
|
|
|
static struct pci_driver savage4_driver = {
|
|
.name = "savage4_smbus",
|
|
.id_table = savage4_ids,
|
|
.probe = savage4_probe,
|
|
.remove = __devexit_p(savage4_remove),
|
|
};
|
|
|
|
static int __init i2c_savage4_init(void)
|
|
{
|
|
return pci_register_driver(&savage4_driver);
|
|
}
|
|
|
|
static void __exit i2c_savage4_exit(void)
|
|
{
|
|
pci_unregister_driver(&savage4_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Alexander Wold <awold@bigfoot.com> "
|
|
"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
|
|
MODULE_DESCRIPTION("Savage4 I2C/SMBus driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(i2c_savage4_init);
|
|
module_exit(i2c_savage4_exit);
|