Lars-Peter Clausen 92ac4c5012 ASoC: z2: Automatically disconnect non-connected pins ... Most DAPM input and output pins of the wm8750 are either used in the card's DAPM routing table or are marked as not connected. The only exceptions are the LINPUT1, RINPUT1, LINPUT2 input pins. Lets assume that those were simply overlooked and that the routing table is complete. Set the fully_routed flag of the card instead of manually marking the unused inputs and outputs as not connected. This makes the code a bit shorter and cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>		2015-05-08 12:05:07 +01:00
..
brownstone.c	ASoC: brownstone: Automatically disconnect non-connected pins	2015-05-08 12:05:07 +01:00
corgi.c
e740_wm9705.c
e750_wm9705.c
e800_wm9712.c
em-x270.c
hx4700.c	ASoC: hx4700: Register jacks at the card level	2015-03-04 17:10:42 +00:00
imote2.c
Kconfig	ASoC: pxa: make TTC DKB tristate	2015-01-30 13:44:35 +01:00
magician.c
Makefile
mioa701_wm9713.c
mmp-pcm.c
mmp-sspa.c
mmp-sspa.h
palm27x.c	ASoC: palm27x: Register jacks at the card level	2015-03-04 17:10:43 +00:00
poodle.c	ASoC: poodle: Automatically disconnect non-connected pins	2015-05-08 12:05:07 +01:00
pxa2xx-ac97.c
pxa2xx-ac97.h
pxa2xx-i2s.c
pxa2xx-i2s.h
pxa2xx-pcm.c
pxa-ssp.c
pxa-ssp.h
raumfeld.c
spitz.c
tosa.c	ASoC: tosa: Automatically disconnect non-connected pins	2015-05-08 12:05:07 +01:00
ttc-dkb.c	ASoC: ttc-dkb: Register jacks at the card level	2015-03-04 17:10:43 +00:00
z2.c	ASoC: z2: Automatically disconnect non-connected pins	2015-05-08 12:05:07 +01:00
zylonite.c