mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-23 18:07:03 +00:00
90b02340dc
This replaces the MIPS-specific to_tm function with the generic rtc_time_to_tm function. The big difference between the two functions is that rtc_time_to_tm uses epoch 70 while to_tm uses 1970, so the result of rtc_time_to_tm needs to be fixed up. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
234 lines
6.8 KiB
C
234 lines
6.8 KiB
C
/*
|
|
* Copyright (C) 2000, 2001 Broadcom Corporation
|
|
*
|
|
* Copyright (C) 2002 MontaVista Software Inc.
|
|
* Author: jsun@mvista.com or jsun@junsun.net
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
#include <linux/bcd.h>
|
|
#include <linux/types.h>
|
|
#include <linux/time.h>
|
|
|
|
#include <asm/time.h>
|
|
#include <asm/addrspace.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/sibyte/sb1250.h>
|
|
#include <asm/sibyte/sb1250_regs.h>
|
|
#include <asm/sibyte/sb1250_smbus.h>
|
|
|
|
|
|
/* M41T81 definitions */
|
|
|
|
/*
|
|
* Register bits
|
|
*/
|
|
|
|
#define M41T81REG_SC_ST 0x80 /* stop bit */
|
|
#define M41T81REG_HR_CB 0x40 /* century bit */
|
|
#define M41T81REG_HR_CEB 0x80 /* century enable bit */
|
|
#define M41T81REG_CTL_S 0x20 /* sign bit */
|
|
#define M41T81REG_CTL_FT 0x40 /* frequency test bit */
|
|
#define M41T81REG_CTL_OUT 0x80 /* output level */
|
|
#define M41T81REG_WD_RB0 0x01 /* watchdog resolution bit 0 */
|
|
#define M41T81REG_WD_RB1 0x02 /* watchdog resolution bit 1 */
|
|
#define M41T81REG_WD_BMB0 0x04 /* watchdog multiplier bit 0 */
|
|
#define M41T81REG_WD_BMB1 0x08 /* watchdog multiplier bit 1 */
|
|
#define M41T81REG_WD_BMB2 0x10 /* watchdog multiplier bit 2 */
|
|
#define M41T81REG_WD_BMB3 0x20 /* watchdog multiplier bit 3 */
|
|
#define M41T81REG_WD_BMB4 0x40 /* watchdog multiplier bit 4 */
|
|
#define M41T81REG_AMO_ABE 0x20 /* alarm in "battery back-up mode" enable bit */
|
|
#define M41T81REG_AMO_SQWE 0x40 /* square wave enable */
|
|
#define M41T81REG_AMO_AFE 0x80 /* alarm flag enable flag */
|
|
#define M41T81REG_ADT_RPT5 0x40 /* alarm repeat mode bit 5 */
|
|
#define M41T81REG_ADT_RPT4 0x80 /* alarm repeat mode bit 4 */
|
|
#define M41T81REG_AHR_RPT3 0x80 /* alarm repeat mode bit 3 */
|
|
#define M41T81REG_AHR_HT 0x40 /* halt update bit */
|
|
#define M41T81REG_AMN_RPT2 0x80 /* alarm repeat mode bit 2 */
|
|
#define M41T81REG_ASC_RPT1 0x80 /* alarm repeat mode bit 1 */
|
|
#define M41T81REG_FLG_AF 0x40 /* alarm flag (read only) */
|
|
#define M41T81REG_FLG_WDF 0x80 /* watchdog flag (read only) */
|
|
#define M41T81REG_SQW_RS0 0x10 /* sqw frequency bit 0 */
|
|
#define M41T81REG_SQW_RS1 0x20 /* sqw frequency bit 1 */
|
|
#define M41T81REG_SQW_RS2 0x40 /* sqw frequency bit 2 */
|
|
#define M41T81REG_SQW_RS3 0x80 /* sqw frequency bit 3 */
|
|
|
|
|
|
/*
|
|
* Register numbers
|
|
*/
|
|
|
|
#define M41T81REG_TSC 0x00 /* tenths/hundredths of second */
|
|
#define M41T81REG_SC 0x01 /* seconds */
|
|
#define M41T81REG_MN 0x02 /* minute */
|
|
#define M41T81REG_HR 0x03 /* hour/century */
|
|
#define M41T81REG_DY 0x04 /* day of week */
|
|
#define M41T81REG_DT 0x05 /* date of month */
|
|
#define M41T81REG_MO 0x06 /* month */
|
|
#define M41T81REG_YR 0x07 /* year */
|
|
#define M41T81REG_CTL 0x08 /* control */
|
|
#define M41T81REG_WD 0x09 /* watchdog */
|
|
#define M41T81REG_AMO 0x0A /* alarm: month */
|
|
#define M41T81REG_ADT 0x0B /* alarm: date */
|
|
#define M41T81REG_AHR 0x0C /* alarm: hour */
|
|
#define M41T81REG_AMN 0x0D /* alarm: minute */
|
|
#define M41T81REG_ASC 0x0E /* alarm: second */
|
|
#define M41T81REG_FLG 0x0F /* flags */
|
|
#define M41T81REG_SQW 0x13 /* square wave register */
|
|
|
|
#define M41T81_CCR_ADDRESS 0x68
|
|
|
|
#define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg))
|
|
|
|
static int m41t81_read(uint8_t addr)
|
|
{
|
|
while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
|
|
;
|
|
|
|
__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
|
|
__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE,
|
|
SMB_CSR(R_SMB_START));
|
|
|
|
while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
|
|
;
|
|
|
|
__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
|
|
SMB_CSR(R_SMB_START));
|
|
|
|
while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
|
|
;
|
|
|
|
if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
|
|
/* Clear error bit by writing a 1 */
|
|
__raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
|
|
return -1;
|
|
}
|
|
|
|
return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
|
|
}
|
|
|
|
static int m41t81_write(uint8_t addr, int b)
|
|
{
|
|
while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
|
|
;
|
|
|
|
__raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
|
|
__raw_writeq(b & 0xff, SMB_CSR(R_SMB_DATA));
|
|
__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
|
|
SMB_CSR(R_SMB_START));
|
|
|
|
while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
|
|
;
|
|
|
|
if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
|
|
/* Clear error bit by writing a 1 */
|
|
__raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
|
|
return -1;
|
|
}
|
|
|
|
/* read the same byte again to make sure it is written */
|
|
__raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
|
|
SMB_CSR(R_SMB_START));
|
|
|
|
while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
|
|
;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int m41t81_set_time(unsigned long t)
|
|
{
|
|
struct rtc_time tm;
|
|
unsigned long flags;
|
|
|
|
/* Note we don't care about the century */
|
|
rtc_time_to_tm(t, &tm);
|
|
|
|
/*
|
|
* Note the write order matters as it ensures the correctness.
|
|
* When we write sec, 10th sec is clear. It is reasonable to
|
|
* believe we should finish writing min within a second.
|
|
*/
|
|
|
|
spin_lock_irqsave(&rtc_lock, flags);
|
|
tm.tm_sec = BIN2BCD(tm.tm_sec);
|
|
m41t81_write(M41T81REG_SC, tm.tm_sec);
|
|
|
|
tm.tm_min = BIN2BCD(tm.tm_min);
|
|
m41t81_write(M41T81REG_MN, tm.tm_min);
|
|
|
|
tm.tm_hour = BIN2BCD(tm.tm_hour);
|
|
tm.tm_hour = (tm.tm_hour & 0x3f) | (m41t81_read(M41T81REG_HR) & 0xc0);
|
|
m41t81_write(M41T81REG_HR, tm.tm_hour);
|
|
|
|
/* tm_wday starts from 0 to 6 */
|
|
if (tm.tm_wday == 0) tm.tm_wday = 7;
|
|
tm.tm_wday = BIN2BCD(tm.tm_wday);
|
|
m41t81_write(M41T81REG_DY, tm.tm_wday);
|
|
|
|
tm.tm_mday = BIN2BCD(tm.tm_mday);
|
|
m41t81_write(M41T81REG_DT, tm.tm_mday);
|
|
|
|
/* tm_mon starts from 0, *ick* */
|
|
tm.tm_mon ++;
|
|
tm.tm_mon = BIN2BCD(tm.tm_mon);
|
|
m41t81_write(M41T81REG_MO, tm.tm_mon);
|
|
|
|
/* we don't do century, everything is beyond 2000 */
|
|
tm.tm_year %= 100;
|
|
tm.tm_year = BIN2BCD(tm.tm_year);
|
|
m41t81_write(M41T81REG_YR, tm.tm_year);
|
|
spin_unlock_irqrestore(&rtc_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned long m41t81_get_time(void)
|
|
{
|
|
unsigned int year, mon, day, hour, min, sec;
|
|
unsigned long flags;
|
|
|
|
/*
|
|
* min is valid if two reads of sec are the same.
|
|
*/
|
|
for (;;) {
|
|
spin_lock_irqsave(&rtc_lock, flags);
|
|
sec = m41t81_read(M41T81REG_SC);
|
|
min = m41t81_read(M41T81REG_MN);
|
|
if (sec == m41t81_read(M41T81REG_SC)) break;
|
|
spin_unlock_irqrestore(&rtc_lock, flags);
|
|
}
|
|
hour = m41t81_read(M41T81REG_HR) & 0x3f;
|
|
day = m41t81_read(M41T81REG_DT);
|
|
mon = m41t81_read(M41T81REG_MO);
|
|
year = m41t81_read(M41T81REG_YR);
|
|
spin_unlock_irqrestore(&rtc_lock, flags);
|
|
|
|
sec = BCD2BIN(sec);
|
|
min = BCD2BIN(min);
|
|
hour = BCD2BIN(hour);
|
|
day = BCD2BIN(day);
|
|
mon = BCD2BIN(mon);
|
|
year = BCD2BIN(year);
|
|
|
|
year += 2000;
|
|
|
|
return mktime(year, mon, day, hour, min, sec);
|
|
}
|
|
|
|
int m41t81_probe(void)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
/* enable chip if it is not enabled yet */
|
|
tmp = m41t81_read(M41T81REG_SC);
|
|
m41t81_write(M41T81REG_SC, tmp & 0x7f);
|
|
|
|
return (m41t81_read(M41T81REG_SC) != -1);
|
|
}
|