Anton Vorontsov af6521ea8a [POWERPC] 85xx: mpc8568mds - update dts to be able to use UCCs ...

1. UCC1's RX_DV pin is 16, not 15;
2. UCC1's phy is at 0x7, not 0x1. Schematics says 0x7, and recent
   u-boot also using 0x7.
3. Use gianfar's (eTSEC) mdio bus. This is hardware default setup.
4. tx-clock should be CLK16 (GE125, PB31);
5. phy-connection-type is RGMII-ID;

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2007-10-08 08:39:04 -05:00

..

bamboo.dts

[POWERPC] 4xx: Fix Bamboo MAL0 dts entry.

2007-09-20 07:37:03 -05:00

ebony.dts

[POWERPC] Document and implement an improved flash device binding for powerpc

2007-09-14 01:33:25 +10:00

ep88xc.dts

[POWERPC] cpm: Describe multi-user ram in its own device node.

2007-10-04 15:47:05 -05:00

holly.dts

[POWERPC] DTS cleanup

2007-09-14 08:53:16 -05:00

kuroboxHD.dts

[POWERPC] DTS cleanup

2007-09-14 08:53:16 -05:00

kuroboxHG.dts

[POWERPC] DTS cleanup

2007-09-14 08:53:16 -05:00

lite5200.dts

[POWERPC] Move PCI nodes to be sibilings with SOC nodes

2007-09-14 08:53:22 -05:00

lite5200b.dts

[POWERPC] Move PCI nodes to be sibilings with SOC nodes

2007-09-14 08:53:22 -05:00

mpc832x_mds.dts

[POWERPC] Move PCI nodes to be sibilings with SOC nodes

2007-09-14 08:53:22 -05:00

mpc832x_rdb.dts

[POWERPC] MPC832x_RDB: Update dts to use SPI1 in QE, register mmc_spi stub

2007-09-14 08:54:13 -05:00

mpc834x_mds.dts

[POWERPC] spi: Use fsl_spi instead of mpc83xx_spi

2007-10-08 08:38:17 -05:00

mpc836x_mds.dts

[POWERPC] Move PCI nodes to be sibilings with SOC nodes

2007-09-14 08:53:22 -05:00

mpc866ads.dts

[POWERPC] DTS cleanup

2007-09-14 08:53:16 -05:00

mpc885ads.dts

[POWERPC] cpm: Describe multi-user ram in its own device node.

2007-10-04 15:47:05 -05:00

mpc7448hpc2.dts

[POWERPC] bootwrapper: adds cuboot for MPC7448HPC2 platform

2007-10-04 11:02:50 -05:00

mpc8272ads.dts

[POWERPC] cpm: Describe multi-user ram in its own device node.

2007-10-04 15:47:05 -05:00

mpc8313erdb.dts

[POWERPC] spi: Use fsl_spi instead of mpc83xx_spi

2007-10-08 08:38:17 -05:00

mpc8349emitx.dts

[POWERPC] spi: Use fsl_spi instead of mpc83xx_spi

2007-10-08 08:38:17 -05:00

mpc8349emitxgp.dts

[POWERPC] spi: Use fsl_spi instead of mpc83xx_spi

2007-10-08 08:38:17 -05:00

mpc8540ads.dts

[POWERPC] Move PCI nodes to be sibilings with SOC nodes

2007-09-14 08:53:22 -05:00

mpc8541cds.dts

[POWERPC] Move PCI nodes to be sibilings with SOC nodes

2007-09-14 08:53:22 -05:00

mpc8544ds.dts

[POWERPC] Move PCI nodes to be sibilings with SOC nodes

2007-09-14 08:53:22 -05:00

mpc8548cds.dts

[POWERPC] Move PCI nodes to be sibilings with SOC nodes

2007-09-14 08:53:22 -05:00

mpc8555cds.dts

[POWERPC] Move PCI nodes to be sibilings with SOC nodes

2007-09-14 08:53:22 -05:00

mpc8560ads.dts

[POWERPC] Move PCI nodes to be sibilings with SOC nodes

2007-09-14 08:53:22 -05:00

mpc8568mds.dts

[POWERPC] 85xx: mpc8568mds - update dts to be able to use UCCs

2007-10-08 08:39:04 -05:00

mpc8572ds.dts

[POWERPC] 85xx: Add basic Uniprocessor MPC8572 DS port

2007-09-14 08:51:54 -05:00

mpc8610_hpcd.dts

[POWERPC] Add initial MPC8610 HPCD Device Tree Source file.

2007-10-08 08:38:23 -05:00

mpc8641_hpcn.dts

[POWERPC] 85xx/86xx: refactor RSTCR reset code

2007-10-08 08:38:47 -05:00

pq2fads.dts

[POWERPC] cpm: Describe multi-user ram in its own device node.

2007-10-04 15:47:05 -05:00

prpmc2800.dts

[POWERPC] DTS cleanup

2007-09-14 08:53:16 -05:00

ps3.dts

…

sequoia.dts

[POWERPC] 4xx: Fix Sequoia MAL0 and EMAC dts entries.

2007-09-20 07:37:14 -05:00

walnut.dts

[POWERPC] 4xx: Convert Walnut flash mappings to new binding

2007-09-19 21:13:16 -05:00