mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-21 00:42:16 +00:00
4875647a08
The "nodir" mode (statically assign master nodes instead of using the resource directory) has always been highly experimental, and never seriously used. This commit fixes a number of problems, making nodir much more usable. - Major change to recovery: recover all locks and restart all in-progress operations after recovery. In some cases it's not possible to know which in-progess locks to recover, so recover all. (Most require recovery in nodir mode anyway since rehashing changes most master nodes.) - Change the way nodir mode is enabled, from a command line mount arg passed through gfs2, into a sysfs file managed by dlm_controld, consistent with the other config settings. - Allow recovering MSTCPY locks on an rsb that has not yet been turned into a master copy. - Ignore RCOM_LOCK and RCOM_LOCK_REPLY recovery messages from a previous, aborted recovery cycle. Base this on the local recovery status not being in the state where any nodes should be sending LOCK messages for the current recovery cycle. - Hold rsb lock around dlm_purge_mstcpy_locks() because it may run concurrently with dlm_recover_master_copy(). - Maintain highbast on process-copy lkb's (in addition to the master as is usual), because the lkb can switch back and forth between being a master and being a process copy as the master node changes in recovery. - When recovering MSTCPY locks, flag rsb's that have non-empty convert or waiting queues for granting at the end of recovery. (Rename flag from LOCKS_PURGED to RECOVER_GRANT and similar for the recovery function, because it's not only resources with purged locks that need grant a grant attempt.) - Replace a couple of unnecessary assertion panics with error messages. Signed-off-by: David Teigland <teigland@redhat.com>
852 lines
21 KiB
C
852 lines
21 KiB
C
/******************************************************************************
|
|
*******************************************************************************
|
|
**
|
|
** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
|
|
** Copyright (C) 2004-2005 Red Hat, Inc. All rights reserved.
|
|
**
|
|
** This copyrighted material is made available to anyone wishing to use,
|
|
** modify, copy, or redistribute it subject to the terms and conditions
|
|
** of the GNU General Public License v.2.
|
|
**
|
|
*******************************************************************************
|
|
******************************************************************************/
|
|
|
|
#include "dlm_internal.h"
|
|
#include "lockspace.h"
|
|
#include "dir.h"
|
|
#include "config.h"
|
|
#include "ast.h"
|
|
#include "memory.h"
|
|
#include "rcom.h"
|
|
#include "lock.h"
|
|
#include "lowcomms.h"
|
|
#include "member.h"
|
|
#include "recover.h"
|
|
|
|
|
|
/*
|
|
* Recovery waiting routines: these functions wait for a particular reply from
|
|
* a remote node, or for the remote node to report a certain status. They need
|
|
* to abort if the lockspace is stopped indicating a node has failed (perhaps
|
|
* the one being waited for).
|
|
*/
|
|
|
|
/*
|
|
* Wait until given function returns non-zero or lockspace is stopped
|
|
* (LS_RECOVERY_STOP set due to failure of a node in ls_nodes). When another
|
|
* function thinks it could have completed the waited-on task, they should wake
|
|
* up ls_wait_general to get an immediate response rather than waiting for the
|
|
* timer to detect the result. A timer wakes us up periodically while waiting
|
|
* to see if we should abort due to a node failure. This should only be called
|
|
* by the dlm_recoverd thread.
|
|
*/
|
|
|
|
static void dlm_wait_timer_fn(unsigned long data)
|
|
{
|
|
struct dlm_ls *ls = (struct dlm_ls *) data;
|
|
mod_timer(&ls->ls_timer, jiffies + (dlm_config.ci_recover_timer * HZ));
|
|
wake_up(&ls->ls_wait_general);
|
|
}
|
|
|
|
int dlm_wait_function(struct dlm_ls *ls, int (*testfn) (struct dlm_ls *ls))
|
|
{
|
|
int error = 0;
|
|
|
|
init_timer(&ls->ls_timer);
|
|
ls->ls_timer.function = dlm_wait_timer_fn;
|
|
ls->ls_timer.data = (long) ls;
|
|
ls->ls_timer.expires = jiffies + (dlm_config.ci_recover_timer * HZ);
|
|
add_timer(&ls->ls_timer);
|
|
|
|
wait_event(ls->ls_wait_general, testfn(ls) || dlm_recovery_stopped(ls));
|
|
del_timer_sync(&ls->ls_timer);
|
|
|
|
if (dlm_recovery_stopped(ls)) {
|
|
log_debug(ls, "dlm_wait_function aborted");
|
|
error = -EINTR;
|
|
}
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* An efficient way for all nodes to wait for all others to have a certain
|
|
* status. The node with the lowest nodeid polls all the others for their
|
|
* status (wait_status_all) and all the others poll the node with the low id
|
|
* for its accumulated result (wait_status_low). When all nodes have set
|
|
* status flag X, then status flag X_ALL will be set on the low nodeid.
|
|
*/
|
|
|
|
uint32_t dlm_recover_status(struct dlm_ls *ls)
|
|
{
|
|
uint32_t status;
|
|
spin_lock(&ls->ls_recover_lock);
|
|
status = ls->ls_recover_status;
|
|
spin_unlock(&ls->ls_recover_lock);
|
|
return status;
|
|
}
|
|
|
|
static void _set_recover_status(struct dlm_ls *ls, uint32_t status)
|
|
{
|
|
ls->ls_recover_status |= status;
|
|
}
|
|
|
|
void dlm_set_recover_status(struct dlm_ls *ls, uint32_t status)
|
|
{
|
|
spin_lock(&ls->ls_recover_lock);
|
|
_set_recover_status(ls, status);
|
|
spin_unlock(&ls->ls_recover_lock);
|
|
}
|
|
|
|
static int wait_status_all(struct dlm_ls *ls, uint32_t wait_status,
|
|
int save_slots)
|
|
{
|
|
struct dlm_rcom *rc = ls->ls_recover_buf;
|
|
struct dlm_member *memb;
|
|
int error = 0, delay;
|
|
|
|
list_for_each_entry(memb, &ls->ls_nodes, list) {
|
|
delay = 0;
|
|
for (;;) {
|
|
if (dlm_recovery_stopped(ls)) {
|
|
error = -EINTR;
|
|
goto out;
|
|
}
|
|
|
|
error = dlm_rcom_status(ls, memb->nodeid, 0);
|
|
if (error)
|
|
goto out;
|
|
|
|
if (save_slots)
|
|
dlm_slot_save(ls, rc, memb);
|
|
|
|
if (rc->rc_result & wait_status)
|
|
break;
|
|
if (delay < 1000)
|
|
delay += 20;
|
|
msleep(delay);
|
|
}
|
|
}
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
static int wait_status_low(struct dlm_ls *ls, uint32_t wait_status,
|
|
uint32_t status_flags)
|
|
{
|
|
struct dlm_rcom *rc = ls->ls_recover_buf;
|
|
int error = 0, delay = 0, nodeid = ls->ls_low_nodeid;
|
|
|
|
for (;;) {
|
|
if (dlm_recovery_stopped(ls)) {
|
|
error = -EINTR;
|
|
goto out;
|
|
}
|
|
|
|
error = dlm_rcom_status(ls, nodeid, status_flags);
|
|
if (error)
|
|
break;
|
|
|
|
if (rc->rc_result & wait_status)
|
|
break;
|
|
if (delay < 1000)
|
|
delay += 20;
|
|
msleep(delay);
|
|
}
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
static int wait_status(struct dlm_ls *ls, uint32_t status)
|
|
{
|
|
uint32_t status_all = status << 1;
|
|
int error;
|
|
|
|
if (ls->ls_low_nodeid == dlm_our_nodeid()) {
|
|
error = wait_status_all(ls, status, 0);
|
|
if (!error)
|
|
dlm_set_recover_status(ls, status_all);
|
|
} else
|
|
error = wait_status_low(ls, status_all, 0);
|
|
|
|
return error;
|
|
}
|
|
|
|
int dlm_recover_members_wait(struct dlm_ls *ls)
|
|
{
|
|
struct dlm_member *memb;
|
|
struct dlm_slot *slots;
|
|
int num_slots, slots_size;
|
|
int error, rv;
|
|
uint32_t gen;
|
|
|
|
list_for_each_entry(memb, &ls->ls_nodes, list) {
|
|
memb->slot = -1;
|
|
memb->generation = 0;
|
|
}
|
|
|
|
if (ls->ls_low_nodeid == dlm_our_nodeid()) {
|
|
error = wait_status_all(ls, DLM_RS_NODES, 1);
|
|
if (error)
|
|
goto out;
|
|
|
|
/* slots array is sparse, slots_size may be > num_slots */
|
|
|
|
rv = dlm_slots_assign(ls, &num_slots, &slots_size, &slots, &gen);
|
|
if (!rv) {
|
|
spin_lock(&ls->ls_recover_lock);
|
|
_set_recover_status(ls, DLM_RS_NODES_ALL);
|
|
ls->ls_num_slots = num_slots;
|
|
ls->ls_slots_size = slots_size;
|
|
ls->ls_slots = slots;
|
|
ls->ls_generation = gen;
|
|
spin_unlock(&ls->ls_recover_lock);
|
|
} else {
|
|
dlm_set_recover_status(ls, DLM_RS_NODES_ALL);
|
|
}
|
|
} else {
|
|
error = wait_status_low(ls, DLM_RS_NODES_ALL, DLM_RSF_NEED_SLOTS);
|
|
if (error)
|
|
goto out;
|
|
|
|
dlm_slots_copy_in(ls);
|
|
}
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
int dlm_recover_directory_wait(struct dlm_ls *ls)
|
|
{
|
|
return wait_status(ls, DLM_RS_DIR);
|
|
}
|
|
|
|
int dlm_recover_locks_wait(struct dlm_ls *ls)
|
|
{
|
|
return wait_status(ls, DLM_RS_LOCKS);
|
|
}
|
|
|
|
int dlm_recover_done_wait(struct dlm_ls *ls)
|
|
{
|
|
return wait_status(ls, DLM_RS_DONE);
|
|
}
|
|
|
|
/*
|
|
* The recover_list contains all the rsb's for which we've requested the new
|
|
* master nodeid. As replies are returned from the resource directories the
|
|
* rsb's are removed from the list. When the list is empty we're done.
|
|
*
|
|
* The recover_list is later similarly used for all rsb's for which we've sent
|
|
* new lkb's and need to receive new corresponding lkid's.
|
|
*
|
|
* We use the address of the rsb struct as a simple local identifier for the
|
|
* rsb so we can match an rcom reply with the rsb it was sent for.
|
|
*/
|
|
|
|
static int recover_list_empty(struct dlm_ls *ls)
|
|
{
|
|
int empty;
|
|
|
|
spin_lock(&ls->ls_recover_list_lock);
|
|
empty = list_empty(&ls->ls_recover_list);
|
|
spin_unlock(&ls->ls_recover_list_lock);
|
|
|
|
return empty;
|
|
}
|
|
|
|
static void recover_list_add(struct dlm_rsb *r)
|
|
{
|
|
struct dlm_ls *ls = r->res_ls;
|
|
|
|
spin_lock(&ls->ls_recover_list_lock);
|
|
if (list_empty(&r->res_recover_list)) {
|
|
list_add_tail(&r->res_recover_list, &ls->ls_recover_list);
|
|
ls->ls_recover_list_count++;
|
|
dlm_hold_rsb(r);
|
|
}
|
|
spin_unlock(&ls->ls_recover_list_lock);
|
|
}
|
|
|
|
static void recover_list_del(struct dlm_rsb *r)
|
|
{
|
|
struct dlm_ls *ls = r->res_ls;
|
|
|
|
spin_lock(&ls->ls_recover_list_lock);
|
|
list_del_init(&r->res_recover_list);
|
|
ls->ls_recover_list_count--;
|
|
spin_unlock(&ls->ls_recover_list_lock);
|
|
|
|
dlm_put_rsb(r);
|
|
}
|
|
|
|
static struct dlm_rsb *recover_list_find(struct dlm_ls *ls, uint64_t id)
|
|
{
|
|
struct dlm_rsb *r = NULL;
|
|
|
|
spin_lock(&ls->ls_recover_list_lock);
|
|
|
|
list_for_each_entry(r, &ls->ls_recover_list, res_recover_list) {
|
|
if (id == (unsigned long) r)
|
|
goto out;
|
|
}
|
|
r = NULL;
|
|
out:
|
|
spin_unlock(&ls->ls_recover_list_lock);
|
|
return r;
|
|
}
|
|
|
|
static void recover_list_clear(struct dlm_ls *ls)
|
|
{
|
|
struct dlm_rsb *r, *s;
|
|
|
|
spin_lock(&ls->ls_recover_list_lock);
|
|
list_for_each_entry_safe(r, s, &ls->ls_recover_list, res_recover_list) {
|
|
list_del_init(&r->res_recover_list);
|
|
r->res_recover_locks_count = 0;
|
|
dlm_put_rsb(r);
|
|
ls->ls_recover_list_count--;
|
|
}
|
|
|
|
if (ls->ls_recover_list_count != 0) {
|
|
log_error(ls, "warning: recover_list_count %d",
|
|
ls->ls_recover_list_count);
|
|
ls->ls_recover_list_count = 0;
|
|
}
|
|
spin_unlock(&ls->ls_recover_list_lock);
|
|
}
|
|
|
|
|
|
/* Master recovery: find new master node for rsb's that were
|
|
mastered on nodes that have been removed.
|
|
|
|
dlm_recover_masters
|
|
recover_master
|
|
dlm_send_rcom_lookup -> receive_rcom_lookup
|
|
dlm_dir_lookup
|
|
receive_rcom_lookup_reply <-
|
|
dlm_recover_master_reply
|
|
set_new_master
|
|
set_master_lkbs
|
|
set_lock_master
|
|
*/
|
|
|
|
/*
|
|
* Set the lock master for all LKBs in a lock queue
|
|
* If we are the new master of the rsb, we may have received new
|
|
* MSTCPY locks from other nodes already which we need to ignore
|
|
* when setting the new nodeid.
|
|
*/
|
|
|
|
static void set_lock_master(struct list_head *queue, int nodeid)
|
|
{
|
|
struct dlm_lkb *lkb;
|
|
|
|
list_for_each_entry(lkb, queue, lkb_statequeue) {
|
|
if (!(lkb->lkb_flags & DLM_IFL_MSTCPY)) {
|
|
lkb->lkb_nodeid = nodeid;
|
|
lkb->lkb_remid = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void set_master_lkbs(struct dlm_rsb *r)
|
|
{
|
|
set_lock_master(&r->res_grantqueue, r->res_nodeid);
|
|
set_lock_master(&r->res_convertqueue, r->res_nodeid);
|
|
set_lock_master(&r->res_waitqueue, r->res_nodeid);
|
|
}
|
|
|
|
/*
|
|
* Propagate the new master nodeid to locks
|
|
* The NEW_MASTER flag tells dlm_recover_locks() which rsb's to consider.
|
|
* The NEW_MASTER2 flag tells recover_lvb() and recover_grant() which
|
|
* rsb's to consider.
|
|
*/
|
|
|
|
static void set_new_master(struct dlm_rsb *r, int nodeid)
|
|
{
|
|
r->res_nodeid = nodeid;
|
|
set_master_lkbs(r);
|
|
rsb_set_flag(r, RSB_NEW_MASTER);
|
|
rsb_set_flag(r, RSB_NEW_MASTER2);
|
|
}
|
|
|
|
/*
|
|
* We do async lookups on rsb's that need new masters. The rsb's
|
|
* waiting for a lookup reply are kept on the recover_list.
|
|
*/
|
|
|
|
static int recover_master(struct dlm_rsb *r)
|
|
{
|
|
struct dlm_ls *ls = r->res_ls;
|
|
int error, ret_nodeid;
|
|
int our_nodeid = dlm_our_nodeid();
|
|
int dir_nodeid = dlm_dir_nodeid(r);
|
|
|
|
if (dir_nodeid == our_nodeid) {
|
|
error = dlm_dir_lookup(ls, our_nodeid, r->res_name,
|
|
r->res_length, &ret_nodeid);
|
|
if (error)
|
|
log_error(ls, "recover dir lookup error %d", error);
|
|
|
|
if (ret_nodeid == our_nodeid)
|
|
ret_nodeid = 0;
|
|
lock_rsb(r);
|
|
set_new_master(r, ret_nodeid);
|
|
unlock_rsb(r);
|
|
} else {
|
|
recover_list_add(r);
|
|
error = dlm_send_rcom_lookup(r, dir_nodeid);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* All MSTCPY locks are purged and rebuilt, even if the master stayed the same.
|
|
* This is necessary because recovery can be started, aborted and restarted,
|
|
* causing the master nodeid to briefly change during the aborted recovery, and
|
|
* change back to the original value in the second recovery. The MSTCPY locks
|
|
* may or may not have been purged during the aborted recovery. Another node
|
|
* with an outstanding request in waiters list and a request reply saved in the
|
|
* requestqueue, cannot know whether it should ignore the reply and resend the
|
|
* request, or accept the reply and complete the request. It must do the
|
|
* former if the remote node purged MSTCPY locks, and it must do the later if
|
|
* the remote node did not. This is solved by always purging MSTCPY locks, in
|
|
* which case, the request reply would always be ignored and the request
|
|
* resent.
|
|
*/
|
|
|
|
static int recover_master_static(struct dlm_rsb *r)
|
|
{
|
|
int dir_nodeid = dlm_dir_nodeid(r);
|
|
int new_master = dir_nodeid;
|
|
|
|
if (dir_nodeid == dlm_our_nodeid())
|
|
new_master = 0;
|
|
|
|
lock_rsb(r);
|
|
dlm_purge_mstcpy_locks(r);
|
|
set_new_master(r, new_master);
|
|
unlock_rsb(r);
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Go through local root resources and for each rsb which has a master which
|
|
* has departed, get the new master nodeid from the directory. The dir will
|
|
* assign mastery to the first node to look up the new master. That means
|
|
* we'll discover in this lookup if we're the new master of any rsb's.
|
|
*
|
|
* We fire off all the dir lookup requests individually and asynchronously to
|
|
* the correct dir node.
|
|
*/
|
|
|
|
int dlm_recover_masters(struct dlm_ls *ls)
|
|
{
|
|
struct dlm_rsb *r;
|
|
int error = 0, count = 0;
|
|
|
|
log_debug(ls, "dlm_recover_masters");
|
|
|
|
down_read(&ls->ls_root_sem);
|
|
list_for_each_entry(r, &ls->ls_root_list, res_root_list) {
|
|
if (dlm_recovery_stopped(ls)) {
|
|
up_read(&ls->ls_root_sem);
|
|
error = -EINTR;
|
|
goto out;
|
|
}
|
|
|
|
if (dlm_no_directory(ls))
|
|
count += recover_master_static(r);
|
|
else if (!is_master(r) &&
|
|
(dlm_is_removed(ls, r->res_nodeid) ||
|
|
rsb_flag(r, RSB_NEW_MASTER))) {
|
|
recover_master(r);
|
|
count++;
|
|
}
|
|
|
|
schedule();
|
|
}
|
|
up_read(&ls->ls_root_sem);
|
|
|
|
log_debug(ls, "dlm_recover_masters %d resources", count);
|
|
|
|
error = dlm_wait_function(ls, &recover_list_empty);
|
|
out:
|
|
if (error)
|
|
recover_list_clear(ls);
|
|
return error;
|
|
}
|
|
|
|
int dlm_recover_master_reply(struct dlm_ls *ls, struct dlm_rcom *rc)
|
|
{
|
|
struct dlm_rsb *r;
|
|
int nodeid;
|
|
|
|
r = recover_list_find(ls, rc->rc_id);
|
|
if (!r) {
|
|
log_error(ls, "dlm_recover_master_reply no id %llx",
|
|
(unsigned long long)rc->rc_id);
|
|
goto out;
|
|
}
|
|
|
|
nodeid = rc->rc_result;
|
|
if (nodeid == dlm_our_nodeid())
|
|
nodeid = 0;
|
|
|
|
lock_rsb(r);
|
|
set_new_master(r, nodeid);
|
|
unlock_rsb(r);
|
|
recover_list_del(r);
|
|
|
|
if (recover_list_empty(ls))
|
|
wake_up(&ls->ls_wait_general);
|
|
out:
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Lock recovery: rebuild the process-copy locks we hold on a
|
|
remastered rsb on the new rsb master.
|
|
|
|
dlm_recover_locks
|
|
recover_locks
|
|
recover_locks_queue
|
|
dlm_send_rcom_lock -> receive_rcom_lock
|
|
dlm_recover_master_copy
|
|
receive_rcom_lock_reply <-
|
|
dlm_recover_process_copy
|
|
*/
|
|
|
|
|
|
/*
|
|
* keep a count of the number of lkb's we send to the new master; when we get
|
|
* an equal number of replies then recovery for the rsb is done
|
|
*/
|
|
|
|
static int recover_locks_queue(struct dlm_rsb *r, struct list_head *head)
|
|
{
|
|
struct dlm_lkb *lkb;
|
|
int error = 0;
|
|
|
|
list_for_each_entry(lkb, head, lkb_statequeue) {
|
|
error = dlm_send_rcom_lock(r, lkb);
|
|
if (error)
|
|
break;
|
|
r->res_recover_locks_count++;
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
static int recover_locks(struct dlm_rsb *r)
|
|
{
|
|
int error = 0;
|
|
|
|
lock_rsb(r);
|
|
|
|
DLM_ASSERT(!r->res_recover_locks_count, dlm_dump_rsb(r););
|
|
|
|
error = recover_locks_queue(r, &r->res_grantqueue);
|
|
if (error)
|
|
goto out;
|
|
error = recover_locks_queue(r, &r->res_convertqueue);
|
|
if (error)
|
|
goto out;
|
|
error = recover_locks_queue(r, &r->res_waitqueue);
|
|
if (error)
|
|
goto out;
|
|
|
|
if (r->res_recover_locks_count)
|
|
recover_list_add(r);
|
|
else
|
|
rsb_clear_flag(r, RSB_NEW_MASTER);
|
|
out:
|
|
unlock_rsb(r);
|
|
return error;
|
|
}
|
|
|
|
int dlm_recover_locks(struct dlm_ls *ls)
|
|
{
|
|
struct dlm_rsb *r;
|
|
int error, count = 0;
|
|
|
|
down_read(&ls->ls_root_sem);
|
|
list_for_each_entry(r, &ls->ls_root_list, res_root_list) {
|
|
if (is_master(r)) {
|
|
rsb_clear_flag(r, RSB_NEW_MASTER);
|
|
continue;
|
|
}
|
|
|
|
if (!rsb_flag(r, RSB_NEW_MASTER))
|
|
continue;
|
|
|
|
if (dlm_recovery_stopped(ls)) {
|
|
error = -EINTR;
|
|
up_read(&ls->ls_root_sem);
|
|
goto out;
|
|
}
|
|
|
|
error = recover_locks(r);
|
|
if (error) {
|
|
up_read(&ls->ls_root_sem);
|
|
goto out;
|
|
}
|
|
|
|
count += r->res_recover_locks_count;
|
|
}
|
|
up_read(&ls->ls_root_sem);
|
|
|
|
log_debug(ls, "dlm_recover_locks %d out", count);
|
|
|
|
error = dlm_wait_function(ls, &recover_list_empty);
|
|
out:
|
|
if (error)
|
|
recover_list_clear(ls);
|
|
return error;
|
|
}
|
|
|
|
void dlm_recovered_lock(struct dlm_rsb *r)
|
|
{
|
|
DLM_ASSERT(rsb_flag(r, RSB_NEW_MASTER), dlm_dump_rsb(r););
|
|
|
|
r->res_recover_locks_count--;
|
|
if (!r->res_recover_locks_count) {
|
|
rsb_clear_flag(r, RSB_NEW_MASTER);
|
|
recover_list_del(r);
|
|
}
|
|
|
|
if (recover_list_empty(r->res_ls))
|
|
wake_up(&r->res_ls->ls_wait_general);
|
|
}
|
|
|
|
/*
|
|
* The lvb needs to be recovered on all master rsb's. This includes setting
|
|
* the VALNOTVALID flag if necessary, and determining the correct lvb contents
|
|
* based on the lvb's of the locks held on the rsb.
|
|
*
|
|
* RSB_VALNOTVALID is set if there are only NL/CR locks on the rsb. If it
|
|
* was already set prior to recovery, it's not cleared, regardless of locks.
|
|
*
|
|
* The LVB contents are only considered for changing when this is a new master
|
|
* of the rsb (NEW_MASTER2). Then, the rsb's lvb is taken from any lkb with
|
|
* mode > CR. If no lkb's exist with mode above CR, the lvb contents are taken
|
|
* from the lkb with the largest lvb sequence number.
|
|
*/
|
|
|
|
static void recover_lvb(struct dlm_rsb *r)
|
|
{
|
|
struct dlm_lkb *lkb, *high_lkb = NULL;
|
|
uint32_t high_seq = 0;
|
|
int lock_lvb_exists = 0;
|
|
int big_lock_exists = 0;
|
|
int lvblen = r->res_ls->ls_lvblen;
|
|
|
|
list_for_each_entry(lkb, &r->res_grantqueue, lkb_statequeue) {
|
|
if (!(lkb->lkb_exflags & DLM_LKF_VALBLK))
|
|
continue;
|
|
|
|
lock_lvb_exists = 1;
|
|
|
|
if (lkb->lkb_grmode > DLM_LOCK_CR) {
|
|
big_lock_exists = 1;
|
|
goto setflag;
|
|
}
|
|
|
|
if (((int)lkb->lkb_lvbseq - (int)high_seq) >= 0) {
|
|
high_lkb = lkb;
|
|
high_seq = lkb->lkb_lvbseq;
|
|
}
|
|
}
|
|
|
|
list_for_each_entry(lkb, &r->res_convertqueue, lkb_statequeue) {
|
|
if (!(lkb->lkb_exflags & DLM_LKF_VALBLK))
|
|
continue;
|
|
|
|
lock_lvb_exists = 1;
|
|
|
|
if (lkb->lkb_grmode > DLM_LOCK_CR) {
|
|
big_lock_exists = 1;
|
|
goto setflag;
|
|
}
|
|
|
|
if (((int)lkb->lkb_lvbseq - (int)high_seq) >= 0) {
|
|
high_lkb = lkb;
|
|
high_seq = lkb->lkb_lvbseq;
|
|
}
|
|
}
|
|
|
|
setflag:
|
|
if (!lock_lvb_exists)
|
|
goto out;
|
|
|
|
if (!big_lock_exists)
|
|
rsb_set_flag(r, RSB_VALNOTVALID);
|
|
|
|
/* don't mess with the lvb unless we're the new master */
|
|
if (!rsb_flag(r, RSB_NEW_MASTER2))
|
|
goto out;
|
|
|
|
if (!r->res_lvbptr) {
|
|
r->res_lvbptr = dlm_allocate_lvb(r->res_ls);
|
|
if (!r->res_lvbptr)
|
|
goto out;
|
|
}
|
|
|
|
if (big_lock_exists) {
|
|
r->res_lvbseq = lkb->lkb_lvbseq;
|
|
memcpy(r->res_lvbptr, lkb->lkb_lvbptr, lvblen);
|
|
} else if (high_lkb) {
|
|
r->res_lvbseq = high_lkb->lkb_lvbseq;
|
|
memcpy(r->res_lvbptr, high_lkb->lkb_lvbptr, lvblen);
|
|
} else {
|
|
r->res_lvbseq = 0;
|
|
memset(r->res_lvbptr, 0, lvblen);
|
|
}
|
|
out:
|
|
return;
|
|
}
|
|
|
|
/* All master rsb's flagged RECOVER_CONVERT need to be looked at. The locks
|
|
converting PR->CW or CW->PR need to have their lkb_grmode set. */
|
|
|
|
static void recover_conversion(struct dlm_rsb *r)
|
|
{
|
|
struct dlm_lkb *lkb;
|
|
int grmode = -1;
|
|
|
|
list_for_each_entry(lkb, &r->res_grantqueue, lkb_statequeue) {
|
|
if (lkb->lkb_grmode == DLM_LOCK_PR ||
|
|
lkb->lkb_grmode == DLM_LOCK_CW) {
|
|
grmode = lkb->lkb_grmode;
|
|
break;
|
|
}
|
|
}
|
|
|
|
list_for_each_entry(lkb, &r->res_convertqueue, lkb_statequeue) {
|
|
if (lkb->lkb_grmode != DLM_LOCK_IV)
|
|
continue;
|
|
if (grmode == -1)
|
|
lkb->lkb_grmode = lkb->lkb_rqmode;
|
|
else
|
|
lkb->lkb_grmode = grmode;
|
|
}
|
|
}
|
|
|
|
/* We've become the new master for this rsb and waiting/converting locks may
|
|
need to be granted in dlm_recover_grant() due to locks that may have
|
|
existed from a removed node. */
|
|
|
|
static void recover_grant(struct dlm_rsb *r)
|
|
{
|
|
if (!list_empty(&r->res_waitqueue) || !list_empty(&r->res_convertqueue))
|
|
rsb_set_flag(r, RSB_RECOVER_GRANT);
|
|
}
|
|
|
|
void dlm_recover_rsbs(struct dlm_ls *ls)
|
|
{
|
|
struct dlm_rsb *r;
|
|
unsigned int count = 0;
|
|
|
|
down_read(&ls->ls_root_sem);
|
|
list_for_each_entry(r, &ls->ls_root_list, res_root_list) {
|
|
lock_rsb(r);
|
|
if (is_master(r)) {
|
|
if (rsb_flag(r, RSB_RECOVER_CONVERT))
|
|
recover_conversion(r);
|
|
if (rsb_flag(r, RSB_NEW_MASTER2))
|
|
recover_grant(r);
|
|
recover_lvb(r);
|
|
count++;
|
|
}
|
|
rsb_clear_flag(r, RSB_RECOVER_CONVERT);
|
|
rsb_clear_flag(r, RSB_NEW_MASTER2);
|
|
unlock_rsb(r);
|
|
}
|
|
up_read(&ls->ls_root_sem);
|
|
|
|
if (count)
|
|
log_debug(ls, "dlm_recover_rsbs %d done", count);
|
|
}
|
|
|
|
/* Create a single list of all root rsb's to be used during recovery */
|
|
|
|
int dlm_create_root_list(struct dlm_ls *ls)
|
|
{
|
|
struct rb_node *n;
|
|
struct dlm_rsb *r;
|
|
int i, error = 0;
|
|
|
|
down_write(&ls->ls_root_sem);
|
|
if (!list_empty(&ls->ls_root_list)) {
|
|
log_error(ls, "root list not empty");
|
|
error = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
for (i = 0; i < ls->ls_rsbtbl_size; i++) {
|
|
spin_lock(&ls->ls_rsbtbl[i].lock);
|
|
for (n = rb_first(&ls->ls_rsbtbl[i].keep); n; n = rb_next(n)) {
|
|
r = rb_entry(n, struct dlm_rsb, res_hashnode);
|
|
list_add(&r->res_root_list, &ls->ls_root_list);
|
|
dlm_hold_rsb(r);
|
|
}
|
|
|
|
/* If we're using a directory, add tossed rsbs to the root
|
|
list; they'll have entries created in the new directory,
|
|
but no other recovery steps should do anything with them. */
|
|
|
|
if (dlm_no_directory(ls)) {
|
|
spin_unlock(&ls->ls_rsbtbl[i].lock);
|
|
continue;
|
|
}
|
|
|
|
for (n = rb_first(&ls->ls_rsbtbl[i].toss); n; n = rb_next(n)) {
|
|
r = rb_entry(n, struct dlm_rsb, res_hashnode);
|
|
list_add(&r->res_root_list, &ls->ls_root_list);
|
|
dlm_hold_rsb(r);
|
|
}
|
|
spin_unlock(&ls->ls_rsbtbl[i].lock);
|
|
}
|
|
out:
|
|
up_write(&ls->ls_root_sem);
|
|
return error;
|
|
}
|
|
|
|
void dlm_release_root_list(struct dlm_ls *ls)
|
|
{
|
|
struct dlm_rsb *r, *safe;
|
|
|
|
down_write(&ls->ls_root_sem);
|
|
list_for_each_entry_safe(r, safe, &ls->ls_root_list, res_root_list) {
|
|
list_del_init(&r->res_root_list);
|
|
dlm_put_rsb(r);
|
|
}
|
|
up_write(&ls->ls_root_sem);
|
|
}
|
|
|
|
/* If not using a directory, clear the entire toss list, there's no benefit to
|
|
caching the master value since it's fixed. If we are using a dir, keep the
|
|
rsb's we're the master of. Recovery will add them to the root list and from
|
|
there they'll be entered in the rebuilt directory. */
|
|
|
|
void dlm_clear_toss_list(struct dlm_ls *ls)
|
|
{
|
|
struct rb_node *n, *next;
|
|
struct dlm_rsb *rsb;
|
|
int i;
|
|
|
|
for (i = 0; i < ls->ls_rsbtbl_size; i++) {
|
|
spin_lock(&ls->ls_rsbtbl[i].lock);
|
|
for (n = rb_first(&ls->ls_rsbtbl[i].toss); n; n = next) {
|
|
next = rb_next(n);;
|
|
rsb = rb_entry(n, struct dlm_rsb, res_hashnode);
|
|
if (dlm_no_directory(ls) || !is_master(rsb)) {
|
|
rb_erase(n, &ls->ls_rsbtbl[i].toss);
|
|
dlm_free_rsb(rsb);
|
|
}
|
|
}
|
|
spin_unlock(&ls->ls_rsbtbl[i].lock);
|
|
}
|
|
}
|
|
|