linux/arch/arm/mach-tegra/board-harmony.c
Linus Torvalds 2e341ca686 Sound updates for 3.5-rc1
This is the first big chunk for 3.5 merges of sound stuff.
 There are a few big changes in different areas.  First off, the
 streaming logic of USB-audio endpoints has been largely rewritten
 for the better support of "implicit feedback".  If anything about USB
 got broken, this change has to be checked.
 
 For HD-audio, the resume procedure was changed; instead of delaying
 the resume of the hardware until the first use, now waking up immediately
 at resume.  This is for buggy BIOS.
 
 For ASoC, dynamic PCM support and the improved support for digital links
 between off-SoC devices are major framework changes.
 
 Some highlights are below:
 
 * HD-audio
 - Avoid the accesses of invalid pin-control bits that may stall the codec
 - V-ref setup cleanups
 - Fix the races in power-saving code
 - Fix the races in codec cache hashes and connection lists
 - Split some common codes for BIOS auto-parser to hda_auto_parser.c
 - Changed the PM resume code to wake up immediately for buggy BIOS
 - Creative SoundCore3D support
 - Add Conexant CX20751/2/3/4 codec support
 
 * ASoC
 - Dynamic PCM support, allowing support for SoCs with internal routing
   through components with tight sequencing and formatting constraints
   within their internal paths or where there are multiple components
   connected with CPU managed DMA controllers inside the SoC.
 - Greatly improved support for direct digital links between off-SoC
   devices, providing a much simpler way of connecting things like digital
   basebands to CODECs.
 - Much more fine grained and robust locking, cleaning up some of the
   confusion that crept in with multi-component.
 - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
   ST-Ericsson MSP I2S controolers
 - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas
   Instruments LM49453.
 - Some regmap changes needed by the Tegra I2S driver.
 - mc13783 audio support.
 
 * Misc
 - Rewrite with module_pci_driver()
 - Xonar DGX support for snd-oxygen
 - Improvement of packet handling in snd-firewire driver
 - New USB-endpoint streaming logic
 - Enhanced M-audio FTU quirks and relevant cleanups
 - Increment the support of OSS devices to 256
 - snd-aloop accuracy improvement
 
 There are a few more pending changes for 3.5, but they will be
 sent slightly later as partly depending on the changes of DRM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPvD/9AAoJEGwxgFQ9KSmkPsIP/AuBGpAZy7b7FiEEIy1Hhdws
 US8WVuPzyDslMVdzZ8OFqyPXanIcL9gscoOGMZOEy7UFtMBiR4GuYiPRPubEMxuP
 /gopUqK4SqIsIwT238qqYszSJSxE7gNEZ/2jhSGtkX4EkaSZ4bAskn0iOKX5uw2f
 kTUQknA1rNLIGba2z6rJbgIW7hdxGfpFy05ruv3ct81nO+5JlgyLuP/v5R6jL+do
 cum0N4dJFRd9YSEi2BG612gdz8LJyzOgPqBKmxMEva6BfqLkR8EdP80FtE3eEOiP
 Et1q2LhZwOlBt0BEjsjjOVxMsgxVax6ps9cuNRTk5ECEOldU5dbDatC45L/e9mSD
 OQVUjYAX1mQAtYva4U4PPn6WU6ma2L5yjy4peCObtyCMkEchXk1bfs4CEfVqCXUP
 yFYN8C+y6osZOyWE3+Enn9ifZdWyLeSVq6CT33Yt+fyKlswp6gRkhKYiEPqTA5aU
 p71X59Pp7q1y3tQwiMJNpf2QdkxuxfKURHswdc4BS9ct0mdZhQX0GyDS7OffkTd4
 Lq5UkVMHA1rLlF9oRPd2C9P4BuMEuvLjf662YCKiw+mWFYdBC036DHLLjm1Hcwuj
 UkpQ2PSrrdHG1u0c3ooZ9dQj1BNX4LoABLqvaMtce6sESD/hJ5gcprYJWvtituwM
 ZzZiJavIWsoJ+SWQWBHe
 =+JSm
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This is the first big chunk for 3.5 merges of sound stuff.

  There are a few big changes in different areas.  First off, the
  streaming logic of USB-audio endpoints has been largely rewritten for
  the better support of "implicit feedback".  If anything about USB got
  broken, this change has to be checked.

  For HD-audio, the resume procedure was changed; instead of delaying
  the resume of the hardware until the first use, now waking up
  immediately at resume.  This is for buggy BIOS.

  For ASoC, dynamic PCM support and the improved support for digital
  links between off-SoC devices are major framework changes.

  Some highlights are below:

  * HD-audio
   - Avoid accesses of invalid pin-control bits that may stall the codec
   - V-ref setup cleanups
   - Fix the races in power-saving code
   - Fix the races in codec cache hashes and connection lists
   - Split some common codes for BIOS auto-parser to hda_auto_parser.c
   - Changed the PM resume code to wake up immediately for buggy BIOS
   - Creative SoundCore3D support
   - Add Conexant CX20751/2/3/4 codec support

  * ASoC
   - Dynamic PCM support, allowing support for SoCs with internal
     routing through components with tight sequencing and formatting
     constraints within their internal paths or where there are multiple
     components connected with CPU managed DMA controllers inside the
     SoC.
   - Greatly improved support for direct digital links between off-SoC
     devices, providing a much simpler way of connecting things like
     digital basebands to CODECs.
   - Much more fine grained and robust locking, cleaning up some of the
     confusion that crept in with multi-component.
   - CPU support for nVidia Tegra 30 I2S and audio hub controllers and
     ST-Ericsson MSP I2S controolers
   - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124,
     Texas Instruments LM49453.
   - Some regmap changes needed by the Tegra I2S driver.
   - mc13783 audio support.

  * Misc
   - Rewrite with module_pci_driver()
   - Xonar DGX support for snd-oxygen
   - Improvement of packet handling in snd-firewire driver
   - New USB-endpoint streaming logic
   - Enhanced M-audio FTU quirks and relevant cleanups
   - Increment the support of OSS devices to 256
   - snd-aloop accuracy improvement

  There are a few more pending changes for 3.5, but they will be sent
  slightly later as partly depending on the changes of DRM."

Fix up conflicts in regmap (due to duplicate patches, with some further
updates then having already come in from the regmap tree).  Also some
fairly trivial context conflicts in the imx and mcx soc drivers.

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
  ALSA: snd-usb: fix stream info output in /proc
  ALSA: pcm - Add proper state checks to snd_pcm_drain()
  ALSA: sh: Fix up namespace collision in sh_dac_audio.
  ALSA: hda/realtek - Fix unused variable compile warning
  ASoC: sh: fsi: enable chip specific data transfer mode
  ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()
  ASoC: sh: fsi: use same format for IN/OUT
  ASoC: sh: fsi: add fsi_version() and removed meaningless version check
  ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC
  ASoC: tegra: Add machine driver for WM8753 codec
  ALSA: hda - Fix possible races of accesses to connection list array
  ASoC: OMAP: HDMI: Introduce codec
  ARM: mx31_3ds: Add sound support
  ASoC: imx-mc13783 cleanup
  mx31moboard: Add sound support
  ASoC: mc13783 codec cleanups
  ASoC: add imx-mc13783 sound support
  ASoC: Add mc13783 codec
  mfd: mc13xxx: add codec platform data
  ASoC: don't flip master of DT-instantiated DAI links
  ...
2012-05-23 13:05:43 -07:00

197 lines
4.9 KiB
C

/*
* arch/arm/mach-tegra/board-harmony.c
*
* Copyright (C) 2010 Google, Inc.
* Copyright (C) 2011 NVIDIA, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/of_serial.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/pda_power.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <sound/wm8903.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/hardware/gic.h>
#include <asm/setup.h>
#include <mach/tegra_wm8903_pdata.h>
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
#include "board.h"
#include "board-harmony.h"
#include "clock.h"
#include "devices.h"
#include "gpio-names.h"
static struct plat_serial8250_port debug_uart_platform_data[] = {
{
.membase = IO_ADDRESS(TEGRA_UARTD_BASE),
.mapbase = TEGRA_UARTD_BASE,
.irq = INT_UARTD,
.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
.type = PORT_TEGRA,
.handle_break = tegra_serial_handle_break,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
}, {
.flags = 0
}
};
static struct platform_device debug_uart = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = debug_uart_platform_data,
},
};
static struct tegra_wm8903_platform_data harmony_audio_pdata = {
.gpio_spkr_en = TEGRA_GPIO_SPKR_EN,
.gpio_hp_det = TEGRA_GPIO_HP_DET,
.gpio_hp_mute = -1,
.gpio_int_mic_en = TEGRA_GPIO_INT_MIC_EN,
.gpio_ext_mic_en = TEGRA_GPIO_EXT_MIC_EN,
};
static struct platform_device harmony_audio_device = {
.name = "tegra-snd-wm8903",
.id = 0,
.dev = {
.platform_data = &harmony_audio_pdata,
},
};
static struct wm8903_platform_data harmony_wm8903_pdata = {
.irq_active_low = 0,
.micdet_cfg = 0,
.micdet_delay = 100,
.gpio_base = HARMONY_GPIO_WM8903(0),
.gpio_cfg = {
0,
0,
WM8903_GPIO_CONFIG_ZERO,
0,
0,
},
};
static struct i2c_board_info __initdata wm8903_board_info = {
I2C_BOARD_INFO("wm8903", 0x1a),
.platform_data = &harmony_wm8903_pdata,
};
static void __init harmony_i2c_init(void)
{
platform_device_register(&tegra_i2c_device1);
platform_device_register(&tegra_i2c_device2);
platform_device_register(&tegra_i2c_device3);
platform_device_register(&tegra_i2c_device4);
wm8903_board_info.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
i2c_register_board_info(0, &wm8903_board_info, 1);
}
static struct platform_device *harmony_devices[] __initdata = {
&debug_uart,
&tegra_sdhci_device1,
&tegra_sdhci_device2,
&tegra_sdhci_device4,
&tegra_ehci3_device,
&tegra_i2s_device1,
&tegra_das_device,
&harmony_audio_device,
};
static void __init tegra_harmony_fixup(struct tag *tags, char **cmdline,
struct meminfo *mi)
{
mi->nr_banks = 2;
mi->bank[0].start = PHYS_OFFSET;
mi->bank[0].size = 448 * SZ_1M;
mi->bank[1].start = SZ_512M;
mi->bank[1].size = SZ_512M;
}
static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
/* name parent rate enabled */
{ "uartd", "pll_p", 216000000, true },
{ "pll_a", "pll_p_out1", 56448000, true },
{ "pll_a_out0", "pll_a", 11289600, true },
{ "cdev1", NULL, 0, true },
{ "i2s1", "pll_a_out0", 11289600, false},
{ "usb3", "clk_m", 12000000, true },
{ NULL, NULL, 0, 0},
};
static struct tegra_sdhci_platform_data sdhci_pdata1 = {
.cd_gpio = -1,
.wp_gpio = -1,
.power_gpio = -1,
};
static struct tegra_sdhci_platform_data sdhci_pdata2 = {
.cd_gpio = TEGRA_GPIO_SD2_CD,
.wp_gpio = TEGRA_GPIO_SD2_WP,
.power_gpio = TEGRA_GPIO_SD2_POWER,
};
static struct tegra_sdhci_platform_data sdhci_pdata4 = {
.cd_gpio = TEGRA_GPIO_SD4_CD,
.wp_gpio = TEGRA_GPIO_SD4_WP,
.power_gpio = TEGRA_GPIO_SD4_POWER,
.is_8bit = 1,
};
static void __init tegra_harmony_init(void)
{
tegra_clk_init_from_table(harmony_clk_init_table);
harmony_pinmux_init();
tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2;
tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices));
harmony_i2c_init();
harmony_regulator_init();
}
MACHINE_START(HARMONY, "harmony")
.atag_offset = 0x100,
.fixup = tegra_harmony_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra20_init_early,
.init_irq = tegra_init_irq,
.handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_harmony_init,
.restart = tegra_assert_system_reset,
MACHINE_END