FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2025-02-11 06:16:10 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
linux/arch/arm/mach-omap2
History
Andy Green b235e00783 OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 
This adapts the register offsets used to read the CPU DIE ID registers
when run on 44XX so they match what is in the OMAP4430 Reference Manual
page 269

Signed-off-by: Andy Green <andy.green@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-14 11:12:54 -07:00
..
include/mach
TI816X: Add low level debug support
2011-02-16 08:31:53 -08:00
board-2430sdp.c
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
board-3430sdp.c
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
board-3630sdp.c
omap2+: Minimize board specific init_early calls
2011-02-25 10:19:21 -08:00
board-4430sdp.c
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
board-am3517crane.c
omap2+: Minimize board specific init_early calls
2011-02-25 10:19:21 -08:00
board-am3517evm.c
audio : AM3517 : Adding i2c info for AIC23 codec
2011-03-08 15:20:41 -08:00
board-apollon.c
omap2+: Minimize board specific init_early calls
2011-02-25 10:19:21 -08:00
board-cm-t35.c
omap2+: Minimize board specific init_early calls
2011-02-25 10:19:21 -08:00
board-cm-t3517.c
omap2+: Minimize board specific init_early calls
2011-02-25 10:19:21 -08:00
board-devkit8000.c
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
board-flash.c
omap: Fix compile if MTD_NAND_OMAP2 is not selected
2011-02-25 10:19:21 -08:00
board-flash.h
omap3630: nand: fix device size to work in polled mode
2011-02-17 15:32:52 -08:00
board-generic.c
omap2+: Minimize board specific init_early calls
2011-02-25 10:19:21 -08:00
board-h4.c
omap: Fix H4 init_irq to not call h4_init_flash
2011-03-10 09:51:29 -08:00
board-igep0020.c
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
board-igep0030.c
OMAP: hsmmc: Rename the device and driver
2011-03-01 13:13:27 -08:00
board-ldp.c
ldp: Fix regulator mapping for ads7846 TS controller
2011-03-02 16:45:50 -08:00
board-n8x0.c
omap: mmc: split out init for 2420
2011-03-01 13:12:55 -08:00
board-omap3beagle.c
omap: Remove unnecessary twl4030_codec_audio settings from board files
2011-03-02 17:01:14 -08:00
board-omap3evm.c
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
board-omap3logic.c
ARM: OMAP2: use early init hook
2011-02-14 15:40:20 -08:00
board-omap3pandora.c
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
board-omap3stalker.c
omap: Remove unnecessary twl4030_codec_audio settings from board files
2011-03-02 17:01:14 -08:00
board-omap3touchbook.c
omap: Remove unnecessary twl4030_codec_audio settings from board files
2011-03-02 17:01:14 -08:00
board-omap4panda.c
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
board-overo.c
omap: Remove unnecessary twl4030_codec_audio settings from board files
2011-03-02 17:01:14 -08:00
board-rm680.c
OMAP: hsmmc: Rename the device and driver
2011-03-01 13:13:27 -08:00
board-rx51-peripherals.c
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
board-rx51-video.c
OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init()
2011-02-23 09:34:25 +02:00
board-rx51.c
omap2+: Minimize board specific init_early calls
2011-02-25 10:19:21 -08:00
board-ti8168evm.c
omap2+: Minimize board specific init_early calls
2011-02-25 10:19:21 -08:00
board-zoom-debugboard.c
OMAP2plus: Fix static function warnings
2010-10-08 10:02:49 -07:00
board-zoom-display.c
OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init()
2011-02-23 09:34:25 +02:00
board-zoom-peripherals.c
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
board-zoom.c
omap3630: nand: fix device size to work in polled mode
2011-02-17 15:32:52 -08:00
clkt2xxx_apll.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
clkt2xxx_dpllcore.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clkt2xxx_sys.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
clkt34xx_dpll3m2.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clkt_clksel.c
arm: omap2: clksel: fix compile warningOrganization: Texas Instruments\n
2011-02-16 17:49:35 -08:00
clkt_dpll.c
OMAP2/3: clock: fix fint calculation for DPLL_FREQSEL
2011-02-22 20:00:47 -07:00
clock2xxx.c
OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
2010-02-24 17:45:15 -07:00
clock2xxx.h
omap: Start using CONFIG_SOC_OMAP
2011-01-27 16:39:40 -08:00
clock3xxx_data.c
OMAP: hsmmc: Rename the device and driver
2011-03-01 13:13:27 -08:00
clock3xxx.c
OMAP3: clock: fix incorrect rate display when switching MPU rate at boot
2010-12-21 21:08:14 -07:00
clock3xxx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock34xx.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clock34xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock36xx.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock36xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock44xx_data.c
OMAP: hsmmc: Rename the device and driver
2011-03-01 13:13:27 -08:00
clock44xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock2420_data.c
Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
2011-01-07 13:16:28 -08:00
clock2430_data.c
OMAP: hsmmc: Rename the device and driver
2011-03-01 13:13:27 -08:00
clock2430.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clock3517.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
clock3517.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock_common_data.c
OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality
2010-05-20 12:31:07 -06:00
clock.c
OMAP2+: clockdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:15 -07:00
clock.h
OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4
2010-12-21 21:31:43 -07:00
clockdomain.c
OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4
2011-01-18 12:36:53 -07:00
clockdomain.h
omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
2011-01-07 13:33:08 -08:00
clockdomains2xxx_3xxx_data.c
omap: Start using CONFIG_SOC_OMAP
2011-01-27 16:39:40 -08:00
clockdomains44xx_data.c
OMAP: PRCM: remove duplicated headers
2011-01-18 12:36:53 -07:00
cm1_44xx.h
OMAP4: CM instances: add clockdomain register offsets
2010-12-21 21:05:15 -07:00
cm2_44xx.h
OMAP4: CM instances: add clockdomain register offsets
2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.c
OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses
2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.h
OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses
2010-12-21 21:05:15 -07:00
cm44xx.c
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
cm44xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
cm-regbits-24xx.h
OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses
2010-12-21 21:05:15 -07:00
cm-regbits-34xx.h
OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support
2010-12-21 21:05:15 -07:00
cm-regbits-44xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
cm.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
cminst44xx.c
OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support
2010-12-21 21:05:15 -07:00
cminst44xx.h
OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support
2010-12-21 21:05:15 -07:00
common.c
Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus
2011-02-16 11:32:38 -08:00
control.c
OMAP3: control/PM: move padconf save code to mach-omap2/control.c
2010-12-21 21:05:16 -07:00
control.h
TI816X: Update common OMAP machine specific sources
2011-02-16 08:31:39 -08:00
cpuidle34xx.c
Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6
2011-01-13 20:15:18 -08:00
devices.c
OMAP4: Initialise the l3 device with the hwmod data.
2011-03-09 17:23:57 +05:30
display.c
OMAP2, 3: DSS2: Create new file display.c for central dss driver registration.
2011-02-23 09:33:27 +02:00
dma.c
arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR
2011-01-27 16:25:35 -08:00
dpll3xxx.c
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-01-06 19:13:58 -08:00
dsp.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
emu.c
omap2/3: Fix initcalls for multi-omap
2010-02-15 09:27:05 -08:00
gpio.c
OMAP2+: GPIO: device registration
2010-12-07 16:26:57 -08:00
gpmc-nand.c
omap3630: nand: fix device size to work in polled mode
2011-02-17 15:32:52 -08:00
gpmc-onenand.c
OMAP: OneNAND: let boards determine OneNAND frequency
2011-02-17 15:44:46 -08:00
gpmc-smc91x.c
omap: use smc91x_platdata to setup smc91x
2009-12-11 16:16:33 -08:00
gpmc-smsc911x.c
ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC
2010-09-28 11:39:18 -07:00
gpmc.c
omap3: nand: configurable fifo threshold to gain the throughput
2011-02-17 15:32:54 -08:00
hsmmc.c
OMAP: hsmmc: Rename the device and driver
2011-03-01 13:13:27 -08:00
hsmmc.h
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2010-10-25 13:46:56 -07:00
hwspinlock.c
omap: add hwspinlock device
2011-02-17 09:52:43 -08:00
i2c.c
omap: mux: Convert 2420 platform init code to use new mux code
2010-07-05 16:31:40 +03:00
id.c
OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430
2011-03-14 11:12:54 -07:00
io.c
omap: gpmc: enable irq mode in gpmc
2011-02-17 15:32:53 -08:00
io.h
OMAP: plat-omap: Fix static function warnings
2010-10-08 10:12:38 -07:00
iommu2.c
omap: IOMMU: add support to callback during fault handling
2011-02-24 14:23:17 -08:00
irq.c
Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus
2011-02-16 11:32:38 -08:00
Kconfig
omap: select REGULATOR_FIXED_VOLTAGE by default for panda and sdp4430
2011-02-22 08:37:03 -08:00
mailbox.c
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
Makefile
OMAP4: l3: Introduce l3-interconnect error handling driver
2011-03-09 17:23:58 +05:30
Makefile.boot
…
mcbsp.c
OMAP: McBSP: APIs to pass DMA params from McBSP driver to client drivers
2011-02-24 13:03:52 -08:00
mux34xx.c
omap3|4: mux: make local structures static
2011-01-06 19:58:28 -08:00
mux34xx.h
omap: mux: Add 36xx CBP package support
2009-12-11 16:16:33 -08:00
mux44xx.c
omap3|4: mux: make local structures static
2011-01-06 19:58:28 -08:00
mux44xx.h
OMAP4: mux: Add CBS package data for OMAP4430 ES2
2010-11-17 12:01:52 +01:00
mux2420.c
OMAP: mux: Add __func__ macro to pr_xxx macros
2010-11-17 12:01:54 +01:00
mux2420.h
omap: mux: Add data for 2420
2010-07-05 16:31:36 +03:00
mux2430.c
OMAP: mux: Add __func__ macro to pr_xxx macros
2010-11-17 12:01:54 +01:00
mux2430.h
omap: mux: Add data for 2430
2010-07-05 16:31:36 +03:00
mux.c
mach-omap2: mux: world-writable debugfs files
2011-02-04 12:08:06 -08:00
mux.h
omap2+: Add struct omap_board_data and use it for platform level serial init
2010-12-22 18:42:35 -08:00
omap4-common.c
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
2011-01-06 19:13:58 -08:00
omap44xx-smc.S
omap4: Add smc API to read AuxCoreBoot0 register
2010-08-02 13:18:18 +03:00
omap_hwmod_3xxx_data.c
Merge branch 'omap-l3-for-next' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into omap-for-linus
2011-03-09 13:15:49 -08:00
omap_hwmod_44xx_data.c
OMAP4: hwmod_data: Add address space and irq in L3 hwmod.
2011-03-09 17:23:57 +05:30
omap_hwmod_2420_data.c
OMAP2/3: VENC hwmod: add OCPIF_SWSUP_IDLE flag to interface
2011-03-09 13:03:15 -08:00
omap_hwmod_2430_data.c
OMAP2/3: VENC hwmod: add OCPIF_SWSUP_IDLE flag to interface
2011-03-09 13:03:15 -08:00
omap_hwmod_common_data.c
OMAP: hwmod data: add class for IVA hwmods
2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h
OMAP: hwmod data: add class for IVA hwmods
2010-07-26 16:34:31 -06:00
omap_hwmod.c
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
omap_l3_noc.c
OMAP4: l3: Introduce l3-interconnect error handling driver
2011-03-09 17:23:58 +05:30
omap_l3_noc.h
OMAP4: l3: Introduce l3-interconnect error handling driver
2011-03-09 17:23:58 +05:30
omap_l3_smx.c
OMAP3: l3: Introduce l3-interconnect error handling driver
2011-03-09 17:23:57 +05:30
omap_l3_smx.h
OMAP3: l3: Introduce l3-interconnect error handling driver
2011-03-09 17:23:57 +05:30
omap_opp_data.h
omap: opp: add OMAP3 OPP table data and common init
2010-12-21 14:30:40 -08:00
omap_phy_internal.c
usb: musb: AM35x: moving internal phy functions out of usb_musb.c file
2011-02-17 17:35:53 +02:00
omap_twl.c
OMAP2+: TWL: include pm header for init protos
2011-01-07 13:33:07 -08:00
omap-headsmp.S
omap4: Add smc API to read AuxCoreBoot0 register
2010-08-02 13:18:18 +03:00
omap-hotplug.c
ARM: CPU hotplug: remove bug checks in platform_cpu_die()
2010-12-20 15:09:10 +00:00
omap-iommu.c
OMAP: iommu: make iva2 iommu selectable
2010-12-15 11:33:31 -06:00
omap-smp.c
Merge branch 'misc' into devel
2011-01-06 22:32:52 +00:00
opp2xxx.h
omap: Start using CONFIG_SOC_OMAP
2011-01-27 16:39:40 -08:00
opp3xxx_data.c
omap: opp: add OMAP3 OPP table data and common init
2010-12-21 14:30:40 -08:00
opp4xxx_data.c
omap4: opp: add OPP table data
2010-12-21 14:30:40 -08:00
opp2420_data.c
OMAP2xxx OPP: clean up comments in OPP data
2010-01-08 15:23:15 -07:00
opp2430_data.c
OMAP2xxx OPP: clean up comments in OPP data
2010-01-08 15:23:15 -07:00
opp.c
omap: opp: add OMAP3 OPP table data and common init
2010-12-21 14:30:40 -08:00
pm24xx.c
console: rename acquire/release_console_sem() to console_lock/unlock()
2011-01-26 10:50:06 +10:00
pm34xx.c
Merge branch 'for_2.6.38/pm-fixes' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-fixes
2011-01-31 13:20:26 -08:00
pm44xx.c
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
2011-01-13 10:05:56 -08:00
pm_bus.c
omap2+: pm_bus: make functions used as pointers as static
2011-01-07 13:33:08 -08:00
pm-debug.c
mach-omap2: pm: world-writable debugfs timer files
2011-02-04 12:08:12 -08:00
pm.c
OMAP4: PM: Program correct init voltages for scalable VDDs
2010-12-22 14:31:48 -08:00
pm.h
OMAP4: Register voltage PMIC parameters with the voltage layer
2010-12-22 14:31:45 -08:00
powerdomain2xxx_3xxx.c
OMAP: PRCM: remove duplicated headers
2011-01-18 12:36:53 -07:00
powerdomain44xx.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomain-common.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomain.c
OMAP2+: powerdomain: add API to get context loss count
2010-12-21 21:31:55 -07:00
powerdomain.h
OMAP2+: powerdomain: add API to get context loss count
2010-12-21 21:31:55 -07:00
powerdomains2xxx_3xxx_data.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.h
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c
omap: Start using CONFIG_SOC_OMAP
2011-01-27 16:39:40 -08:00
powerdomains3xxx_data.c
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
2010-12-21 21:05:16 -07:00
powerdomains44xx_data.c
OMAP4: powerdomain: Remove L3INIT_PD OFF state
2010-12-21 22:37:28 -07:00
prcm44xx.h
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
prcm_mpu44xx.h
omap4: prcm: Fix the CPUx clockdomain offsets
2011-02-25 12:45:05 -07:00
prcm-common.h
Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus
2011-03-02 17:11:18 -08:00
prcm.c
ARM: OMAP: Allow platforms to hook reset cleanly
2011-01-27 16:39:48 -08:00
prm2xxx_3xxx.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
prm2xxx_3xxx.h
omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
2011-01-07 13:33:10 -08:00
prm44xx.c
OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file
2010-12-21 21:05:14 -07:00
prm44xx.h
OMAP4: CM instances: add clockdomain register offsets
2010-12-21 21:05:15 -07:00
prm-regbits-24xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prm-regbits-34xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prm.h
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
prminst44xx.c
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
prminst44xx.h
OMAP4: PRCM: add OMAP4-specific accessor/mutator functions
2010-12-21 21:05:14 -07:00
scrm44xx.h
OMAP4: PRCM: Add SCRM header file
2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h
omap3: zoom: Introduce zoom3 board support
2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdram-nokia.c
arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data
2010-12-17 15:13:46 -08:00
sdram-nokia.h
arm: omap: add sdram-nokia.h
2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h
omap3: SDRC: add timing data for Numonyx M65KxxxxAM
2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdrc2xxx.c
OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"
2010-12-21 21:05:14 -07:00
sdrc.c
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
sdrc.h
OMAP2+: use global values for the SRAM PA addresses
2010-12-21 14:45:56 -08:00
serial.c
OMAP2+: hwmod: rename some init functions
2011-02-28 12:04:35 -07:00
sleep24xx.S
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sleep34xx.S
OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files
2010-12-21 20:01:55 -07:00
smartreflex-class3.c
OMAP3: PM: Adding smartreflex class3 driver
2010-12-22 14:31:40 -08:00
smartreflex.c
mach-omap2: smartreflex: world-writable debugfs voltage files
2011-02-07 09:55:22 -08:00
sr_device.c
OMAP3+: sr_device: include pm header
2011-01-07 13:33:06 -08:00
sram34xx.S
OMAP2/3: SRAM: add comment about crashes during a TLB miss
2010-12-21 21:08:14 -07:00
sram242x.S
OMAP2/3: SRAM: add comment about crashes during a TLB miss
2010-12-21 21:08:14 -07:00
sram243x.S
OMAP2/3: SRAM: add comment about crashes during a TLB miss
2010-12-21 21:08:14 -07:00
timer-gp.c
Merge branch 'devel-cleanup' into omap-for-linus
2011-03-02 17:07:14 -08:00
timer-gp.h
OMAP2plus: Fix static function warnings
2010-10-08 10:02:49 -07:00
timer-mpu.c
omap4: Use irq line defines from irq-44xx.h
2010-02-23 15:29:08 -08:00
usb-ehci.c
arm: omap4: usb: add platform init code for EHCI
2010-12-01 02:42:13 +05:30
usb-fs.c
OMAP: control: move plat-omap/control.h to mach-omap2/control.h
2010-10-08 11:40:20 -06:00
usb-musb.c
OMAP2+: musb: hwmod adaptation for musb registration
2011-02-17 18:34:00 +02:00
usb-tusb6010.c
Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
2011-01-07 13:16:28 -08:00
voltage.c
arm: mach-omap2: voltage: debugfs: fix memory leak
2011-01-31 12:59:14 -08:00
wd_timer.c
omap2+: wdt: trivial sparse fixes
2011-01-06 19:58:28 -08:00
wd_timer.h
OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c
2010-12-21 19:56:17 -07:00