mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-17 06:17:35 +00:00
375389288a
CS4236+ driver Background: The card/chipset supports an external MIDI interrupt. By default, this interrupt isn't used (because the isapnp mechanism chooses a configuration without an assigned interrupt). If the user wishes to explicitly select an interrupt via the mpu_irq parameter for such a configured device, it doesn't work: The driver always shows: isapnp MPU: port=0x330, irq=-1 (note the 'irq=-1') Problem: The driver only allows to set the irq if pnp_irq_valid returns true for this particular pnp device. This, however, is only true if an interrupt has already been assigned (pnp_valid_irq returns true if the flag IORESOURCE_IRQ is set and IORESOURCE_UNSET is not set). If no interrupt has been assigned so far, IORESOURCE_UNSET is set and pnp_irq_valid returns false, thereby inhibiting the selection of a valid irq. Solution: Don't check for a valid (= already assigned) irq at the point of calling pnp_resource_change. Tested successfully on Linux 2.6.11. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jaroslav Kysela <perex@suse.cz> |
||
|---|---|---|
| .. | ||
| ad1816a | ||
| ad1848 | ||
| cs423x | ||
| es1688 | ||
| gus | ||
| opti9xx | ||
| sb | ||
| wavefront | ||
| als100.c | ||
| azt2320.c | ||
| cmi8330.c | ||
| dt019x.c | ||
| es18xx.c | ||
| Kconfig | ||
| Makefile | ||
| opl3sa2.c | ||
| sgalaxy.c | ||
| sscape.c | ||