FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-21 08:53:41 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
b3f9b92a6e
linux/drivers/video/aty/radeon_monitor.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2 
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

1011 lines
29 KiB
C
Raw Blame History

#include "radeonfb.h"
#include "../edid.h"
static struct fb_var_screeninfo radeonfb_default_var = {
.xres = 640,
.yres = 480,
.xres_virtual = 640,
.yres_virtual = 480,
.bits_per_pixel = 8,
.red = { .length = 8 },
.green = { .length = 8 },
.blue = { .length = 8 },
.activate = FB_ACTIVATE_NOW,
.height = -1,
.width = -1,
.pixclock = 39721,
.left_margin = 40,
.right_margin = 24,
.upper_margin = 32,
.lower_margin = 11,
.hsync_len = 96,
.vsync_len = 2,
.vmode = FB_VMODE_NONINTERLACED
};
static char *radeon_get_mon_name(int type)
{
char *pret = NULL;
switch (type) {
case MT_NONE:
pret = "no";
break;
case MT_CRT:
pret = "CRT";
break;
case MT_DFP:
pret = "DFP";
break;
case MT_LCD:
pret = "LCD";
break;
case MT_CTV:
pret = "CTV";
break;
case MT_STV:
pret = "STV";
break;
}
return pret;
}
#ifdef CONFIG_PPC_OF
/*
* Try to find monitor informations & EDID data out of the Open Firmware
* device-tree. This also contains some "hacks" to work around a few machine
* models with broken OF probing by hard-coding known EDIDs for some Mac
* laptops internal LVDS panel. (XXX: not done yet)
*/
static int __devinit radeon_parse_montype_prop(struct device_node *dp, u8 **out_EDID,
int hdno)
{
static char *propnames[] = { "DFP,EDID", "LCD,EDID", "EDID",
"EDID1", "EDID2", NULL };
u8 *pedid = NULL;
u8 *pmt = NULL;
u8 *tmp;
int i, mt = MT_NONE;
RTRACE("analyzing OF properties...\n");
pmt = (u8 *)get_property(dp, "display-type", NULL);
if (!pmt)
return MT_NONE;
RTRACE("display-type: %s\n", pmt);
/* OF says "LCD" for DFP as well, we discriminate from the caller of this
* function
*/
if (!strcmp(pmt, "LCD") || !strcmp(pmt, "DFP"))
mt = MT_DFP;
else if (!strcmp(pmt, "CRT"))
mt = MT_CRT;
else {
if (strcmp(pmt, "NONE") != 0)
printk(KERN_WARNING "radeonfb: Unknown OF display-type: %s\n",
pmt);
return MT_NONE;
}
for (i = 0; propnames[i] != NULL; ++i) {
pedid = (u8 *)get_property(dp, propnames[i], NULL);
if (pedid != NULL)
break;
}
/* We didn't find the EDID in the leaf node, some cards will actually
* put EDID1/EDID2 in the parent, look for these (typically M6 tipb).
* single-head cards have hdno == -1 and skip this step
*/
if (pedid == NULL && dp->parent && (hdno != -1))
pedid = get_property(dp->parent, (hdno == 0) ? "EDID1" : "EDID2", NULL);
if (pedid == NULL && dp->parent && (hdno == 0))
pedid = get_property(dp->parent, "EDID", NULL);
if (pedid == NULL)
return mt;
tmp = (u8 *)kmalloc(EDID_LENGTH, GFP_KERNEL);
if (!tmp)
return mt;
memcpy(tmp, pedid, EDID_LENGTH);
*out_EDID = tmp;
return mt;
}
static int __devinit radeon_probe_OF_head(struct radeonfb_info *rinfo, int head_no,
u8 **out_EDID)
{
struct device_node *dp;
RTRACE("radeon_probe_OF_head\n");
dp = rinfo->of_node;
while (dp == NULL)
return MT_NONE;
if (rinfo->has_CRTC2) {
char *pname;
int len, second = 0;
dp = dp->child;
do {
if (!dp)
return MT_NONE;
pname = (char *)get_property(dp, "name", NULL);
if (!pname)
return MT_NONE;
len = strlen(pname);
RTRACE("head: %s (letter: %c, head_no: %d)\n",
pname, pname[len-1], head_no);
if (pname[len-1] == 'A' && head_no == 0) {
int mt = radeon_parse_montype_prop(dp, out_EDID, 0);
/* Maybe check for LVDS_GEN_CNTL here ? I need to check out
* what OF does when booting with lid closed
*/
if (mt == MT_DFP && rinfo->is_mobility)
mt = MT_LCD;
return mt;
} else if (pname[len-1] == 'B' && head_no == 1)
return radeon_parse_montype_prop(dp, out_EDID, 1);
second = 1;
dp = dp->sibling;
} while(!second);
} else {
if (head_no > 0)
return MT_NONE;
return radeon_parse_montype_prop(dp, out_EDID, -1);
}
return MT_NONE;
}
#endif /* CONFIG_PPC_OF */
static int __devinit radeon_get_panel_info_BIOS(struct radeonfb_info *rinfo)
{
unsigned long tmp, tmp0;
char stmp[30];
int i;
if (!rinfo->bios_seg)
return 0;
if (!(tmp = BIOS_IN16(rinfo->fp_bios_start + 0x40))) {
printk(KERN_ERR "radeonfb: Failed to detect DFP panel info using BIOS\n");
rinfo->panel_info.pwr_delay = 200;
return 0;
}
for(i=0; i<24; i++)
stmp[i] = BIOS_IN8(tmp+i+1);
stmp[24] = 0;
printk("radeonfb: panel ID string: %s\n", stmp);
rinfo->panel_info.xres = BIOS_IN16(tmp + 25);
rinfo->panel_info.yres = BIOS_IN16(tmp + 27);
printk("radeonfb: detected LVDS panel size from BIOS: %dx%d\n",
rinfo->panel_info.xres, rinfo->panel_info.yres);
rinfo->panel_info.pwr_delay = BIOS_IN16(tmp + 44);
RTRACE("BIOS provided panel power delay: %d\n", rinfo->panel_info.pwr_delay);
if (rinfo->panel_info.pwr_delay > 2000 || rinfo->panel_info.pwr_delay <= 0)
rinfo->panel_info.pwr_delay = 2000;
/*
* Some panels only work properly with some divider combinations
*/
rinfo->panel_info.ref_divider = BIOS_IN16(tmp + 46);
rinfo->panel_info.post_divider = BIOS_IN8(tmp + 48);
rinfo->panel_info.fbk_divider = BIOS_IN16(tmp + 49);
if (rinfo->panel_info.ref_divider != 0 &&
rinfo->panel_info.fbk_divider > 3) {
rinfo->panel_info.use_bios_dividers = 1;
printk(KERN_INFO "radeondb: BIOS provided dividers will be used\n");
RTRACE("ref_divider = %x\n", rinfo->panel_info.ref_divider);
RTRACE("post_divider = %x\n", rinfo->panel_info.post_divider);
RTRACE("fbk_divider = %x\n", rinfo->panel_info.fbk_divider);
}
RTRACE("Scanning BIOS table ...\n");
for(i=0; i<32; i++) {
tmp0 = BIOS_IN16(tmp+64+i*2);
if (tmp0 == 0)
break;
RTRACE(" %d x %d\n", BIOS_IN16(tmp0), BIOS_IN16(tmp0+2));
if ((BIOS_IN16(tmp0) == rinfo->panel_info.xres) &&
(BIOS_IN16(tmp0+2) == rinfo->panel_info.yres)) {
rinfo->panel_info.hblank = (BIOS_IN16(tmp0+17) - BIOS_IN16(tmp0+19)) * 8;
rinfo->panel_info.hOver_plus = ((BIOS_IN16(tmp0+21) -
BIOS_IN16(tmp0+19) -1) * 8) & 0x7fff;
rinfo->panel_info.hSync_width = BIOS_IN8(tmp0+23) * 8;
rinfo->panel_info.vblank = BIOS_IN16(tmp0+24) - BIOS_IN16(tmp0+26);
rinfo->panel_info.vOver_plus = (BIOS_IN16(tmp0+28) & 0x7ff) - BIOS_IN16(tmp0+26);
rinfo->panel_info.vSync_width = (BIOS_IN16(tmp0+28) & 0xf800) >> 11;
rinfo->panel_info.clock = BIOS_IN16(tmp0+9);
/* Assume high active syncs for now until ATI tells me more... maybe we
* can probe register values here ?
*/
rinfo->panel_info.hAct_high = 1;
rinfo->panel_info.vAct_high = 1;
/* Mark panel infos valid */
rinfo->panel_info.valid = 1;
RTRACE("Found panel in BIOS table:\n");
RTRACE(" hblank: %d\n", rinfo->panel_info.hblank);
RTRACE(" hOver_plus: %d\n", rinfo->panel_info.hOver_plus);
RTRACE(" hSync_width: %d\n", rinfo->panel_info.hSync_width);
RTRACE(" vblank: %d\n", rinfo->panel_info.vblank);
RTRACE(" vOver_plus: %d\n", rinfo->panel_info.vOver_plus);
RTRACE(" vSync_width: %d\n", rinfo->panel_info.vSync_width);
RTRACE(" clock: %d\n", rinfo->panel_info.clock);
return 1;
}
}
RTRACE("Didn't find panel in BIOS table !\n");
return 0;
}
/* Try to extract the connector informations from the BIOS. This
* doesn't quite work yet, but it's output is still useful for
* debugging
*/
static void __devinit radeon_parse_connector_info(struct radeonfb_info *rinfo)
{
int offset, chips, connectors, tmp, i, conn, type;
static char* __conn_type_table[16] = {
"NONE", "Proprietary", "CRT", "DVI-I", "DVI-D", "Unknown", "Unknown",
"Unknown", "Unknown", "Unknown", "Unknown", "Unknown", "Unknown",
"Unknown", "Unknown", "Unknown"
};
if (!rinfo->bios_seg)
return;
offset = BIOS_IN16(rinfo->fp_bios_start + 0x50);
if (offset == 0) {
printk(KERN_WARNING "radeonfb: No connector info table detected\n");
return;
}
/* Don't do much more at this point but displaying the data if
* DEBUG is enabled
*/
chips = BIOS_IN8(offset++) >> 4;
RTRACE("%d chips in connector info\n", chips);
for (i = 0; i < chips; i++) {
tmp = BIOS_IN8(offset++);
connectors = tmp & 0x0f;
RTRACE(" - chip %d has %d connectors\n", tmp >> 4, connectors);
for (conn = 0; ; conn++) {
tmp = BIOS_IN16(offset);
if (tmp == 0)
break;
offset += 2;
type = (tmp >> 12) & 0x0f;
RTRACE(" * connector %d of type %d (%s) : %04x\n",
conn, type, __conn_type_table[type], tmp);
}
}
}
/*
* Probe physical connection of a CRT. This code comes from XFree
* as well and currently is only implemented for the CRT DAC, the
* code for the TVDAC is commented out in XFree as "non working"
*/
static int __devinit radeon_crt_is_connected(struct radeonfb_info *rinfo, int is_crt_dac)
{
int connected = 0;
/* the monitor either wasn't connected or it is a non-DDC CRT.
* try to probe it
*/
if (is_crt_dac) {
unsigned long ulOrigVCLK_ECP_CNTL;
unsigned long ulOrigDAC_CNTL;
unsigned long ulOrigDAC_EXT_CNTL;
unsigned long ulOrigCRTC_EXT_CNTL;
unsigned long ulData;
unsigned long ulMask;
ulOrigVCLK_ECP_CNTL = INPLL(VCLK_ECP_CNTL);
ulData = ulOrigVCLK_ECP_CNTL;
ulData &= ~(PIXCLK_ALWAYS_ONb
| PIXCLK_DAC_ALWAYS_ONb);
ulMask = ~(PIXCLK_ALWAYS_ONb
| PIXCLK_DAC_ALWAYS_ONb);
OUTPLLP(VCLK_ECP_CNTL, ulData, ulMask);
ulOrigCRTC_EXT_CNTL = INREG(CRTC_EXT_CNTL);
ulData = ulOrigCRTC_EXT_CNTL;
ulData |= CRTC_CRT_ON;
OUTREG(CRTC_EXT_CNTL, ulData);
ulOrigDAC_EXT_CNTL = INREG(DAC_EXT_CNTL);
ulData = ulOrigDAC_EXT_CNTL;
ulData &= ~DAC_FORCE_DATA_MASK;
ulData |= (DAC_FORCE_BLANK_OFF_EN
|DAC_FORCE_DATA_EN
|DAC_FORCE_DATA_SEL_MASK);
if ((rinfo->family == CHIP_FAMILY_RV250) ||
(rinfo->family == CHIP_FAMILY_RV280))
ulData |= (0x01b6 << DAC_FORCE_DATA_SHIFT);
else
ulData |= (0x01ac << DAC_FORCE_DATA_SHIFT);
OUTREG(DAC_EXT_CNTL, ulData);
ulOrigDAC_CNTL = INREG(DAC_CNTL);
ulData = ulOrigDAC_CNTL;
ulData |= DAC_CMP_EN;
ulData &= ~(DAC_RANGE_CNTL_MASK
| DAC_PDWN);
ulData |= 0x2;
OUTREG(DAC_CNTL, ulData);
mdelay(1);
ulData = INREG(DAC_CNTL);
connected = (DAC_CMP_OUTPUT & ulData) ? 1 : 0;
ulData = ulOrigVCLK_ECP_CNTL;
ulMask = 0xFFFFFFFFL;
OUTPLLP(VCLK_ECP_CNTL, ulData, ulMask);
OUTREG(DAC_CNTL, ulOrigDAC_CNTL );
OUTREG(DAC_EXT_CNTL, ulOrigDAC_EXT_CNTL );
OUTREG(CRTC_EXT_CNTL, ulOrigCRTC_EXT_CNTL);
}
return connected ? MT_CRT : MT_NONE;
}
/*
* Parse the "monitor_layout" string if any. This code is mostly
* copied from XFree's radeon driver
*/
static int __devinit radeon_parse_monitor_layout(struct radeonfb_info *rinfo,
const char *monitor_layout)
{
char s1[5], s2[5];
int i = 0, second = 0;
const char *s;
if (!monitor_layout)
return 0;
s = monitor_layout;
do {
switch(*s) {
case ',':
s1[i] = '\0';
i = 0;
second = 1;
break;
case ' ':
case '\0':
break;
default:
if (i > 4)
break;
if (second)
s2[i] = *s;
else
s1[i] = *s;
i++;
}
} while (*s++);
if (second)
s2[i] = 0;
else {
s1[i] = 0;
s2[0] = 0;
}
if (strcmp(s1, "CRT") == 0)
rinfo->mon1_type = MT_CRT;
else if (strcmp(s1, "TMDS") == 0)
rinfo->mon1_type = MT_DFP;
else if (strcmp(s1, "LVDS") == 0)
rinfo->mon1_type = MT_LCD;
if (strcmp(s2, "CRT") == 0)
rinfo->mon2_type = MT_CRT;
else if (strcmp(s2, "TMDS") == 0)
rinfo->mon2_type = MT_DFP;
else if (strcmp(s2, "LVDS") == 0)
rinfo->mon2_type = MT_LCD;
return 1;
}
/*
* Probe display on both primary and secondary card's connector (if any)
* by various available techniques (i2c, OF device tree, BIOS, ...) and
* try to retreive EDID. The algorithm here comes from XFree's radeon
* driver
*/
void __devinit radeon_probe_screens(struct radeonfb_info *rinfo,
const char *monitor_layout, int ignore_edid)
{
#ifdef CONFIG_FB_RADEON_I2C
int ddc_crt2_used = 0;
#endif
int tmp, i;
radeon_parse_connector_info(rinfo);
if (radeon_parse_monitor_layout(rinfo, monitor_layout)) {
/*
* If user specified a monitor_layout option, use it instead
* of auto-detecting. Maybe we should only use this argument
* on the first radeon card probed or provide a way to specify
* a layout for each card ?
*/
RTRACE("Using specified monitor layout: %s", monitor_layout);
#ifdef CONFIG_FB_RADEON_I2C
if (!ignore_edid) {
if (rinfo->mon1_type != MT_NONE)
if (!radeon_probe_i2c_connector(rinfo, ddc_dvi, &rinfo->mon1_EDID)) {
radeon_probe_i2c_connector(rinfo, ddc_crt2, &rinfo->mon1_EDID);
ddc_crt2_used = 1;
}
if (rinfo->mon2_type != MT_NONE)
if (!radeon_probe_i2c_connector(rinfo, ddc_vga, &rinfo->mon2_EDID) &&
!ddc_crt2_used)
radeon_probe_i2c_connector(rinfo, ddc_crt2, &rinfo->mon2_EDID);
}
#endif /* CONFIG_FB_RADEON_I2C */
if (rinfo->mon1_type == MT_NONE) {
if (rinfo->mon2_type != MT_NONE) {
rinfo->mon1_type = rinfo->mon2_type;
rinfo->mon1_EDID = rinfo->mon2_EDID;
} else {
rinfo->mon1_type = MT_CRT;
printk(KERN_INFO "radeonfb: No valid monitor, assuming CRT on first port\n");
}
rinfo->mon2_type = MT_NONE;
rinfo->mon2_EDID = NULL;
}
} else {
/*
* Auto-detecting display type (well... trying to ...)
*/
RTRACE("Starting monitor auto detection...\n");
#if DEBUG && defined(CONFIG_FB_RADEON_I2C)
{
u8 *EDIDs[4] = { NULL, NULL, NULL, NULL };
int mon_types[4] = {MT_NONE, MT_NONE, MT_NONE, MT_NONE};
int i;
for (i = 0; i < 4; i++)
mon_types[i] = radeon_probe_i2c_connector(rinfo,
i+1, &EDIDs[i]);
}
#endif /* DEBUG */
/*
* Old single head cards
*/
if (!rinfo->has_CRTC2) {
#ifdef CONFIG_PPC_OF
if (rinfo->mon1_type == MT_NONE)
rinfo->mon1_type = radeon_probe_OF_head(rinfo, 0,
&rinfo->mon1_EDID);
#endif /* CONFIG_PPC_OF */
#ifdef CONFIG_FB_RADEON_I2C
if (rinfo->mon1_type == MT_NONE)
rinfo->mon1_type =
radeon_probe_i2c_connector(rinfo, ddc_dvi,
&rinfo->mon1_EDID);
if (rinfo->mon1_type == MT_NONE)
rinfo->mon1_type =
radeon_probe_i2c_connector(rinfo, ddc_vga,
&rinfo->mon1_EDID);
if (rinfo->mon1_type == MT_NONE)
rinfo->mon1_type =
radeon_probe_i2c_connector(rinfo, ddc_crt2,
&rinfo->mon1_EDID);
#endif /* CONFIG_FB_RADEON_I2C */
if (rinfo->mon1_type == MT_NONE)
rinfo->mon1_type = MT_CRT;
goto bail;
}
/*
* Check for cards with reversed DACs or TMDS controllers using BIOS
*/
if (rinfo->bios_seg &&
(tmp = BIOS_IN16(rinfo->fp_bios_start + 0x50))) {
for (i = 1; i < 4; i++) {
unsigned int tmp0;
if (!BIOS_IN8(tmp + i*2) && i > 1)
break;
tmp0 = BIOS_IN16(tmp + i*2);
if ((!(tmp0 & 0x01)) && (((tmp0 >> 8) & 0x0f) == ddc_dvi)) {
rinfo->reversed_DAC = 1;
printk(KERN_INFO "radeonfb: Reversed DACs detected\n");
}
if ((((tmp0 >> 8) & 0x0f) == ddc_dvi) && ((tmp0 >> 4) & 0x01)) {
rinfo->reversed_TMDS = 1;
printk(KERN_INFO "radeonfb: Reversed TMDS detected\n");
}
}
}
/*
* Probe primary head (DVI or laptop internal panel)
*/
#ifdef CONFIG_PPC_OF
if (rinfo->mon1_type == MT_NONE)
rinfo->mon1_type = radeon_probe_OF_head(rinfo, 0,
&rinfo->mon1_EDID);
#endif /* CONFIG_PPC_OF */
#ifdef CONFIG_FB_RADEON_I2C
if (rinfo->mon1_type == MT_NONE)
rinfo->mon1_type = radeon_probe_i2c_connector(rinfo, ddc_dvi,
&rinfo->mon1_EDID);
if (rinfo->mon1_type == MT_NONE) {
rinfo->mon1_type = radeon_probe_i2c_connector(rinfo, ddc_crt2,
&rinfo->mon1_EDID);
if (rinfo->mon1_type != MT_NONE)
ddc_crt2_used = 1;
}
#endif /* CONFIG_FB_RADEON_I2C */
if (rinfo->mon1_type == MT_NONE && rinfo->is_mobility &&
((rinfo->bios_seg && (INREG(BIOS_4_SCRATCH) & 4))
|| (INREG(LVDS_GEN_CNTL) & LVDS_ON))) {
rinfo->mon1_type = MT_LCD;
printk("Non-DDC laptop panel detected\n");
}
if (rinfo->mon1_type == MT_NONE)
rinfo->mon1_type = radeon_crt_is_connected(rinfo, rinfo->reversed_DAC);
/*
* Probe secondary head (mostly VGA, can be DVI)
*/
#ifdef CONFIG_PPC_OF
if (rinfo->mon2_type == MT_NONE)
rinfo->mon2_type = radeon_probe_OF_head(rinfo, 1,
&rinfo->mon2_EDID);
#endif /* CONFIG_PPC_OF */
#ifdef CONFIG_FB_RADEON_I2C
if (rinfo->mon2_type == MT_NONE)
rinfo->mon2_type = radeon_probe_i2c_connector(rinfo, ddc_vga,
&rinfo->mon2_EDID);
if (rinfo->mon2_type == MT_NONE && !ddc_crt2_used)
rinfo->mon2_type = radeon_probe_i2c_connector(rinfo, ddc_crt2,
&rinfo->mon2_EDID);
#endif /* CONFIG_FB_RADEON_I2C */
if (rinfo->mon2_type == MT_NONE)
rinfo->mon2_type = radeon_crt_is_connected(rinfo, !rinfo->reversed_DAC);
/*
* If we only detected port 2, we swap them, if none detected,
* assume CRT (maybe fallback to old BIOS_SCRATCH stuff ? or look
* at FP registers ?)
*/
if (rinfo->mon1_type == MT_NONE) {
if (rinfo->mon2_type != MT_NONE) {
rinfo->mon1_type = rinfo->mon2_type;
rinfo->mon1_EDID = rinfo->mon2_EDID;
} else
rinfo->mon1_type = MT_CRT;
rinfo->mon2_type = MT_NONE;
rinfo->mon2_EDID = NULL;
}
/*
* Deal with reversed TMDS
*/
if (rinfo->reversed_TMDS) {
/* Always keep internal TMDS as primary head */
if (rinfo->mon1_type == MT_DFP || rinfo->mon2_type == MT_DFP) {
int tmp_type = rinfo->mon1_type;
u8 *tmp_EDID = rinfo->mon1_EDID;
rinfo->mon1_type = rinfo->mon2_type;
rinfo->mon1_EDID = rinfo->mon2_EDID;
rinfo->mon2_type = tmp_type;
rinfo->mon2_EDID = tmp_EDID;
if (rinfo->mon1_type == MT_CRT || rinfo->mon2_type == MT_CRT)
rinfo->reversed_DAC ^= 1;
}
}
}
if (ignore_edid) {
kfree(rinfo->mon1_EDID);
rinfo->mon1_EDID = NULL;
kfree(rinfo->mon2_EDID);
rinfo->mon2_EDID = NULL;
}
bail:
printk(KERN_INFO "radeonfb: Monitor 1 type %s found\n",
radeon_get_mon_name(rinfo->mon1_type));
if (rinfo->mon1_EDID)
printk(KERN_INFO "radeonfb: EDID probed\n");
if (!rinfo->has_CRTC2)
return;
printk(KERN_INFO "radeonfb: Monitor 2 type %s found\n",
radeon_get_mon_name(rinfo->mon2_type));
if (rinfo->mon2_EDID)
printk(KERN_INFO "radeonfb: EDID probed\n");
}
/*
* This functions applyes any arch/model/machine specific fixups
* to the panel info. It may eventually alter EDID block as
* well or whatever is specific to a given model and not probed
* properly by the default code
*/
static void radeon_fixup_panel_info(struct radeonfb_info *rinfo)
{
#ifdef CONFIG_PPC_OF
/*
* LCD Flat panels should use fixed dividers, we enfore that on
* PPC only for now...
*/
if (!rinfo->panel_info.use_bios_dividers && rinfo->mon1_type == MT_LCD
&& rinfo->is_mobility) {
int ppll_div_sel;
u32 ppll_divn;
ppll_div_sel = INREG8(CLOCK_CNTL_INDEX + 1) & 0x3;
radeon_pll_errata_after_index(rinfo);
ppll_divn = INPLL(PPLL_DIV_0 + ppll_div_sel);
rinfo->panel_info.ref_divider = rinfo->pll.ref_div;
rinfo->panel_info.fbk_divider = ppll_divn & 0x7ff;
rinfo->panel_info.post_divider = (ppll_divn >> 16) & 0x7;
rinfo->panel_info.use_bios_dividers = 1;
printk(KERN_DEBUG "radeonfb: Using Firmware dividers 0x%08x "
"from PPLL %d\n",
rinfo->panel_info.fbk_divider |
(rinfo->panel_info.post_divider << 16),
ppll_div_sel);
}
#endif /* CONFIG_PPC_OF */
}
/*
* Fill up panel infos from a mode definition, either returned by the EDID
* or from the default mode when we can't do any better
*/
static void radeon_var_to_panel_info(struct radeonfb_info *rinfo, struct fb_var_screeninfo *var)
{
rinfo->panel_info.xres = var->xres;
rinfo->panel_info.yres = var->yres;
rinfo->panel_info.clock = 100000000 / var->pixclock;
rinfo->panel_info.hOver_plus = var->right_margin;
rinfo->panel_info.hSync_width = var->hsync_len;
rinfo->panel_info.hblank = var->left_margin +
(var->right_margin + var->hsync_len);
rinfo->panel_info.vOver_plus = var->lower_margin;
rinfo->panel_info.vSync_width = var->vsync_len;
rinfo->panel_info.vblank = var->upper_margin +
(var->lower_margin + var->vsync_len);
rinfo->panel_info.hAct_high =
(var->sync & FB_SYNC_HOR_HIGH_ACT) != 0;
rinfo->panel_info.vAct_high =
(var->sync & FB_SYNC_VERT_HIGH_ACT) != 0;
rinfo->panel_info.valid = 1;
/* We use a default of 200ms for the panel power delay,
* I need to have a real schedule() instead of mdelay's in the panel code.
* we might be possible to figure out a better power delay either from
* MacOS OF tree or from the EDID block (proprietary extensions ?)
*/
rinfo->panel_info.pwr_delay = 200;
}
static void radeon_videomode_to_var(struct fb_var_screeninfo *var,
const struct fb_videomode *mode)
{
var->xres = mode->xres;
var->yres = mode->yres;
var->xres_virtual = mode->xres;
var->yres_virtual = mode->yres;
var->xoffset = 0;
var->yoffset = 0;
var->pixclock = mode->pixclock;
var->left_margin = mode->left_margin;
var->right_margin = mode->right_margin;
var->upper_margin = mode->upper_margin;
var->lower_margin = mode->lower_margin;
var->hsync_len = mode->hsync_len;
var->vsync_len = mode->vsync_len;
var->sync = mode->sync;
var->vmode = mode->vmode;
}
/*
* Build the modedb for head 1 (head 2 will come later), check panel infos
* from either BIOS or EDID, and pick up the default mode
*/
void __devinit radeon_check_modes(struct radeonfb_info *rinfo, const char *mode_option)
{
struct fb_info * info = rinfo->info;
int has_default_mode = 0;
/*
* Fill default var first
*/
info->var = radeonfb_default_var;
INIT_LIST_HEAD(&info->modelist);
/*
* First check out what BIOS has to say
*/
if (rinfo->mon1_type == MT_LCD)
radeon_get_panel_info_BIOS(rinfo);
/*
* Parse EDID detailed timings and deduce panel infos if any. Right now
* we only deal with first entry returned by parse_EDID, we may do better
* some day...
*/
if (!rinfo->panel_info.use_bios_dividers && rinfo->mon1_type != MT_CRT
&& rinfo->mon1_EDID) {
struct fb_var_screeninfo var;
RTRACE("Parsing EDID data for panel info\n");
if (fb_parse_edid(rinfo->mon1_EDID, &var) == 0) {
if (var.xres >= rinfo->panel_info.xres &&
var.yres >= rinfo->panel_info.yres)
radeon_var_to_panel_info(rinfo, &var);
}
}
/*
* Do any additional platform/arch fixups to the panel infos
*/
radeon_fixup_panel_info(rinfo);
/*
* If we have some valid panel infos, we setup the default mode based on
* those
*/
if (rinfo->mon1_type != MT_CRT && rinfo->panel_info.valid) {
struct fb_var_screeninfo *var = &info->var;
RTRACE("Setting up default mode based on panel info\n");
var->xres = rinfo->panel_info.xres;
var->yres = rinfo->panel_info.yres;
var->xres_virtual = rinfo->panel_info.xres;
var->yres_virtual = rinfo->panel_info.yres;
var->xoffset = var->yoffset = 0;
var->bits_per_pixel = 8;
var->pixclock = 100000000 / rinfo->panel_info.clock;
var->left_margin = (rinfo->panel_info.hblank - rinfo->panel_info.hOver_plus
- rinfo->panel_info.hSync_width);
var->right_margin = rinfo->panel_info.hOver_plus;
var->upper_margin = (rinfo->panel_info.vblank - rinfo->panel_info.vOver_plus
- rinfo->panel_info.vSync_width);
var->lower_margin = rinfo->panel_info.vOver_plus;
var->hsync_len = rinfo->panel_info.hSync_width;
var->vsync_len = rinfo->panel_info.vSync_width;
var->sync = 0;
if (rinfo->panel_info.hAct_high)
var->sync |= FB_SYNC_HOR_HIGH_ACT;
if (rinfo->panel_info.vAct_high)
var->sync |= FB_SYNC_VERT_HIGH_ACT;
var->vmode = 0;
has_default_mode = 1;
}
/*
* Now build modedb from EDID
*/
if (rinfo->mon1_EDID) {
fb_edid_to_monspecs(rinfo->mon1_EDID, &info->monspecs);
fb_videomode_to_modelist(info->monspecs.modedb,
info->monspecs.modedb_len,
&info->modelist);
rinfo->mon1_modedb = info->monspecs.modedb;
rinfo->mon1_dbsize = info->monspecs.modedb_len;
}
/*
* Finally, if we don't have panel infos we need to figure some (or
* we try to read it from card), we try to pick a default mode
* and create some panel infos. Whatever...
*/
if (rinfo->mon1_type != MT_CRT && !rinfo->panel_info.valid) {
struct fb_videomode *modedb;
int dbsize;
char modename[32];
RTRACE("Guessing panel info...\n");
if (rinfo->panel_info.xres == 0 || rinfo->panel_info.yres == 0) {
u32 tmp = INREG(FP_HORZ_STRETCH) & HORZ_PANEL_SIZE;
rinfo->panel_info.xres = ((tmp >> HORZ_PANEL_SHIFT) + 1) * 8;
tmp = INREG(FP_VERT_STRETCH) & VERT_PANEL_SIZE;
rinfo->panel_info.yres = (tmp >> VERT_PANEL_SHIFT) + 1;
}
if (rinfo->panel_info.xres == 0 || rinfo->panel_info.yres == 0) {
printk(KERN_WARNING "radeonfb: Can't find panel size, going back to CRT\n");
rinfo->mon1_type = MT_CRT;
goto pickup_default;
}
printk(KERN_WARNING "radeonfb: Assuming panel size %dx%d\n",
rinfo->panel_info.xres, rinfo->panel_info.yres);
modedb = rinfo->mon1_modedb;
dbsize = rinfo->mon1_dbsize;
snprintf(modename, 31, "%dx%d", rinfo->panel_info.xres, rinfo->panel_info.yres);
if (fb_find_mode(&info->var, info, modename,
modedb, dbsize, NULL, 8) == 0) {
printk(KERN_WARNING "radeonfb: Can't find mode for panel size, going back to CRT\n");
rinfo->mon1_type = MT_CRT;
goto pickup_default;
}
has_default_mode = 1;
radeon_var_to_panel_info(rinfo, &info->var);
}
pickup_default:
/*
* Apply passed-in mode option if any
*/
if (mode_option) {
if (fb_find_mode(&info->var, info, mode_option,
info->monspecs.modedb,
info->monspecs.modedb_len, NULL, 8) != 0)
has_default_mode = 1;
}
/*
* Still no mode, let's pick up a default from the db
*/
if (!has_default_mode && info->monspecs.modedb != NULL) {
struct fb_monspecs *specs = &info->monspecs;
struct fb_videomode *modedb = NULL;
/* get preferred timing */
if (specs->misc & FB_MISC_1ST_DETAIL) {
int i;
for (i = 0; i < specs->modedb_len; i++) {
if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
modedb = &specs->modedb[i];
break;
}
}
} else {
/* otherwise, get first mode in database */
modedb = &specs->modedb[0];
}
if (modedb != NULL) {
info->var.bits_per_pixel = 8;
radeon_videomode_to_var(&info->var, modedb);
has_default_mode = 1;
}
}
if (1) {
struct fb_videomode mode;
/* Make sure that whatever mode got selected is actually in the
* modelist or the kernel may die
*/
fb_var_to_videomode(&mode, &info->var);
fb_add_videomode(&mode, &info->modelist);
}
}
/*
* The code below is used to pick up a mode in check_var and
* set_var. It should be made generic
*/
/*
* This is used when looking for modes. We assign a "distance" value
* to a mode in the modedb depending how "close" it is from what we
* are looking for.
* Currently, we don't compare that much, we could do better but
* the current fbcon doesn't quite mind ;)
*/
static int radeon_compare_modes(const struct fb_var_screeninfo *var,
const struct fb_videomode *mode)
{
int distance = 0;
distance = mode->yres - var->yres;
distance += (mode->xres - var->xres)/2;
return distance;
}
/*
* This function is called by check_var, it gets the passed in mode parameter, and
* outputs a valid mode matching the passed-in one as closely as possible.
* We need something better ultimately. Things like fbcon basically pass us out
* current mode with xres/yres hacked, while things like XFree will actually
* produce a full timing that we should respect as much as possible.
*
* This is why I added the FB_ACTIVATE_FIND that is used by fbcon. Without this,
* we do a simple spec match, that's all. With it, we actually look for a mode in
* either our monitor modedb or the vesa one if none
*
*/
int radeon_match_mode(struct radeonfb_info *rinfo,
struct fb_var_screeninfo *dest,
const struct fb_var_screeninfo *src)
{
const struct fb_videomode *db = vesa_modes;
int i, dbsize = 34;
int has_rmx, native_db = 0;
int distance = INT_MAX;
const struct fb_videomode *candidate = NULL;
/* Start with a copy of the requested mode */
memcpy(dest, src, sizeof(struct fb_var_screeninfo));
/* Check if we have a modedb built from EDID */
if (rinfo->mon1_modedb) {
db = rinfo->mon1_modedb;
dbsize = rinfo->mon1_dbsize;
native_db = 1;
}
/* Check if we have a scaler allowing any fancy mode */
has_rmx = rinfo->mon1_type == MT_LCD || rinfo->mon1_type == MT_DFP;
/* If we have a scaler and are passed FB_ACTIVATE_TEST or
* FB_ACTIVATE_NOW, just do basic checking and return if the
* mode match
*/
if ((src->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_TEST ||
(src->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) {
/* We don't have an RMX, validate timings. If we don't have
* monspecs, we should be paranoid and not let use go above
* 640x480-60, but I assume userland knows what it's doing here
* (though I may be proven wrong...)
*/
if (has_rmx == 0 && rinfo->mon1_modedb)
if (fb_validate_mode((struct fb_var_screeninfo *)src, rinfo->info))
return -EINVAL;
return 0;
}
/* Now look for a mode in the database */
while (db) {
for (i = 0; i < dbsize; i++) {
int d;
if (db[i].yres < src->yres)
continue;
if (db[i].xres < src->xres)
continue;
d = radeon_compare_modes(src, &db[i]);
/* If the new mode is at least as good as the previous one,
* then it's our new candidate
*/
if (d < distance) {
candidate = &db[i];
distance = d;
}
}
db = NULL;
/* If we have a scaler, we allow any mode from the database */
if (native_db && has_rmx) {
db = vesa_modes;
dbsize = 34;
native_db = 0;
}
}
/* If we have found a match, return it */
if (candidate != NULL) {
radeon_videomode_to_var(dest, candidate);
return 0;
}
/* If we haven't and don't have a scaler, fail */
if (!has_rmx)
return -EINVAL;
return 0;
}
Reference in New Issue View Git Blame Copy Permalink