mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-27 11:55:53 +00:00
57886616ca
Updating the cache maintenance order before CPU shutdown when doing CPU hotplug. The old order: * clean L1 by flush_cache_all * exit SMP * CPU shutdown Adapt to: * disable L1 data cache by clear C bit * clean L1 by v7_flush_dcache_louis * exit SMP * CPU shutdown For CPU hotplug case, it's no need to do "flush_cache_all". And we should disable L1 data cache before clean L1 data cache. Then leaving the SMP coherency. Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
169 lines
4.1 KiB
ArmAsm
169 lines
4.1 KiB
ArmAsm
/*
|
|
* Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
|
|
#include <asm/assembler.h>
|
|
#include <asm/asm-offsets.h>
|
|
|
|
#include "sleep.h"
|
|
#include "flowctrl.h"
|
|
|
|
#define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 << 27) /* Hotplug shutdown */
|
|
|
|
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
|
|
/*
|
|
* tegra30_hotplug_shutdown(void)
|
|
*
|
|
* Powergates the current CPU.
|
|
* Should never return.
|
|
*/
|
|
ENTRY(tegra30_hotplug_shutdown)
|
|
/* Powergate this CPU */
|
|
mov r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
|
|
bl tegra30_cpu_shutdown
|
|
mov pc, lr @ should never get here
|
|
ENDPROC(tegra30_hotplug_shutdown)
|
|
|
|
/*
|
|
* tegra30_cpu_shutdown(unsigned long flags)
|
|
*
|
|
* Puts the current CPU in wait-for-event mode on the flow controller
|
|
* and powergates it -- flags (in R0) indicate the request type.
|
|
* Must never be called for CPU 0.
|
|
*
|
|
* corrupts r0-r4, r12
|
|
*/
|
|
ENTRY(tegra30_cpu_shutdown)
|
|
cpu_id r3
|
|
cmp r3, #0
|
|
moveq pc, lr @ Must never be called for CPU 0
|
|
|
|
ldr r12, =TEGRA_FLOW_CTRL_VIRT
|
|
cpu_to_csr_reg r1, r3
|
|
add r1, r1, r12 @ virtual CSR address for this CPU
|
|
cpu_to_halt_reg r2, r3
|
|
add r2, r2, r12 @ virtual HALT_EVENTS address for this CPU
|
|
|
|
/*
|
|
* Clear this CPU's "event" and "interrupt" flags and power gate
|
|
* it when halting but not before it is in the "WFE" state.
|
|
*/
|
|
movw r12, \
|
|
FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG | \
|
|
FLOW_CTRL_CSR_ENABLE
|
|
mov r4, #(1 << 4)
|
|
orr r12, r12, r4, lsl r3
|
|
str r12, [r1]
|
|
|
|
/* Halt this CPU. */
|
|
mov r3, #0x400
|
|
delay_1:
|
|
subs r3, r3, #1 @ delay as a part of wfe war.
|
|
bge delay_1;
|
|
cpsid a @ disable imprecise aborts.
|
|
ldr r3, [r1] @ read CSR
|
|
str r3, [r1] @ clear CSR
|
|
tst r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
|
|
moveq r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT @ For LP2
|
|
movne r3, #FLOW_CTRL_WAITEVENT @ For hotplug
|
|
str r3, [r2]
|
|
ldr r0, [r2]
|
|
b wfe_war
|
|
|
|
__cpu_reset_again:
|
|
dsb
|
|
.align 5
|
|
wfe @ CPU should be power gated here
|
|
wfe_war:
|
|
b __cpu_reset_again
|
|
|
|
/*
|
|
* 38 nop's, which fills reset of wfe cache line and
|
|
* 4 more cachelines with nop
|
|
*/
|
|
.rept 38
|
|
nop
|
|
.endr
|
|
b . @ should never get here
|
|
|
|
ENDPROC(tegra30_cpu_shutdown)
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
/*
|
|
* tegra30_sleep_cpu_secondary_finish(unsigned long v2p)
|
|
*
|
|
* Enters LP2 on secondary CPU by exiting coherency and powergating the CPU.
|
|
*/
|
|
ENTRY(tegra30_sleep_cpu_secondary_finish)
|
|
mov r7, lr
|
|
|
|
/* Flush and disable the L1 data cache */
|
|
bl tegra_disable_clean_inv_dcache
|
|
|
|
/* Powergate this CPU. */
|
|
mov r0, #0 @ power mode flags (!hotplug)
|
|
bl tegra30_cpu_shutdown
|
|
mov r0, #1 @ never return here
|
|
mov pc, r7
|
|
ENDPROC(tegra30_sleep_cpu_secondary_finish)
|
|
|
|
/*
|
|
* tegra30_tear_down_cpu
|
|
*
|
|
* Switches the CPU to enter sleep.
|
|
*/
|
|
ENTRY(tegra30_tear_down_cpu)
|
|
mov32 r6, TEGRA_FLOW_CTRL_BASE
|
|
|
|
b tegra30_enter_sleep
|
|
ENDPROC(tegra30_tear_down_cpu)
|
|
|
|
/*
|
|
* tegra30_enter_sleep
|
|
*
|
|
* uses flow controller to enter sleep state
|
|
* executes from IRAM with SDRAM in selfrefresh when target state is LP0 or LP1
|
|
* executes from SDRAM with target state is LP2
|
|
* r6 = TEGRA_FLOW_CTRL_BASE
|
|
*/
|
|
tegra30_enter_sleep:
|
|
cpu_id r1
|
|
|
|
cpu_to_csr_reg r2, r1
|
|
ldr r0, [r6, r2]
|
|
orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
|
|
orr r0, r0, #FLOW_CTRL_CSR_ENABLE
|
|
str r0, [r6, r2]
|
|
|
|
mov r0, #FLOW_CTRL_WAIT_FOR_INTERRUPT
|
|
orr r0, r0, #FLOW_CTRL_HALT_CPU_IRQ | FLOW_CTRL_HALT_CPU_FIQ
|
|
cpu_to_halt_reg r2, r1
|
|
str r0, [r6, r2]
|
|
dsb
|
|
ldr r0, [r6, r2] /* memory barrier */
|
|
|
|
halted:
|
|
isb
|
|
dsb
|
|
wfi /* CPU should be power gated here */
|
|
|
|
/* !!!FIXME!!! Implement halt failure handler */
|
|
b halted
|
|
|
|
#endif
|