.. |
88pm860x-core.c
|
mfd: Fix pm8606 build failure
|
2012-03-06 18:46:57 +01:00 |
88pm860x-i2c.c
|
mfd: Add ability to wake the system for 88pm860x
|
2012-03-06 18:46:49 +01:00 |
aat2870-core.c
|
simple_open: automatically convert to simple_open()
|
2012-04-05 15:25:50 -07:00 |
ab3100-core.c
|
simple_open: automatically convert to simple_open()
|
2012-04-05 15:25:50 -07:00 |
ab3100-otp.c
|
|
|
ab8500-core.c
|
mfd: Enable Device Tree for ab8500-core driver
|
2012-05-20 17:27:10 +02:00 |
ab8500-debugfs.c
|
mfd: Enable ab8500-debug when Device Tree is enabled
|
2012-05-20 17:27:10 +02:00 |
ab8500-gpadc.c
|
mfd: Enable ab8500-gpadc driver for Device Tree
|
2012-05-20 17:27:11 +02:00 |
ab8500-sysctrl.c
|
mfd: Enable Device Tree support in the ab8500-sysctrl driver
|
2012-05-20 17:27:13 +02:00 |
abx500-core.c
|
mfd: Add module.h to the implicit drivers/mfd users
|
2011-10-31 19:32:04 -04:00 |
adp5520.c
|
mfd: Set adp5520 bits if new value is different from the old one
|
2011-12-20 18:50:55 +01:00 |
anatop-mfd.c
|
mfd: Make anatop register accessor more flexible and rename meaningfully
|
2012-05-20 17:27:07 +02:00 |
asic3.c
|
mfd: No need to check for the GPIO offset from asic3_gpio_to_irq
|
2012-05-01 12:00:23 +02:00 |
cs5535-mfd.c
|
mfd: Use module_pci_driver
|
2012-05-01 12:00:21 +02:00 |
da903x.c
|
mfd: Set da903x bits if new value is different from the old one
|
2011-12-20 18:50:56 +01:00 |
da9052-core.c
|
MFD changes for 3.5
|
2012-05-29 11:53:11 -07:00 |
da9052-i2c.c
|
mfd: Convert da9052 to use devm_* APIs
|
2012-05-20 17:27:03 +02:00 |
da9052-spi.c
|
mfd: Convert da9052 to use devm_* APIs
|
2012-05-20 17:27:03 +02:00 |
davinci_voicecodec.c
|
|
|
db8500-prcmu.c
|
ARM: ux500: Provide regulator support for SMSC911x via Device Tree
|
2012-06-01 02:04:46 +02:00 |
dbx500-prcmu-regs.h
|
mfd : Check if the other db8500 core is in WFI
|
2012-03-06 18:46:56 +01:00 |
dm355evm_msp.c
|
mfd: Use gpio_request_one from dm355evm_msp
|
2012-01-09 00:37:38 +01:00 |
ezx-pcap.c
|
|
|
htc-egpio.c
|
|
|
htc-i2cpld.c
|
|
|
htc-pasic3.c
|
|
|
intel_msic.c
|
mfd: Convert Intel MSIC driver to use devm_* interfaces.
|
2012-05-01 12:00:23 +02:00 |
janz-cmodio.c
|
mfd: Use module_pci_driver
|
2012-05-01 12:00:21 +02:00 |
jz4740-adc.c
|
mfd: Don't declare jz4740_adc_cells const
|
2012-01-09 00:37:36 +01:00 |
Kconfig
|
mfd: Update twl6040 Kconfig to avoid build breakage
|
2012-07-09 00:16:25 +02:00 |
lm3533-core.c
|
mfd: Mark two lm3533 zone registers as volatile
|
2012-05-20 17:27:14 +02:00 |
lm3533-ctrlbank.c
|
mfd: Use SI-units for the lm3533 max-current interface
|
2012-05-20 17:27:02 +02:00 |
lpc_ich.c
|
watchdog: Convert iTCO_wdt driver to mfd model
|
2012-05-09 17:20:09 +02:00 |
lpc_sch.c
|
mfd: Change tunnelcreek watchdog name on the lpc_sch subdevices array
|
2012-05-20 17:27:03 +02:00 |
Makefile
|
MFD changes for 3.5
|
2012-05-29 11:53:11 -07:00 |
max8925-core.c
|
max8925_power: Remove support for irq bits that do not exist
|
2011-11-25 23:24:45 +04:00 |
max8925-i2c.c
|
mfd: Add pm ops to max8925
|
2012-01-09 01:03:34 +01:00 |
max8997-irq.c
|
mfd: Revert "mfd: add irq domain support for max8997 interrupts"
|
2012-04-17 14:51:47 +01:00 |
max8997.c
|
mfd: Revert "mfd: add irq domain support for max8997 interrupts"
|
2012-04-17 14:51:47 +01:00 |
max8998-irq.c
|
|
|
max8998.c
|
mfd: Use standard device wakeup for handling max8998 wakeup device
|
2012-01-09 00:37:36 +01:00 |
max77693-irq.c
|
mfd: Add MAX77693 irq handler
|
2012-05-20 17:27:06 +02:00 |
max77693.c
|
mfd: Add MAX77693 irq handler
|
2012-05-20 17:27:06 +02:00 |
mc13xxx-core.c
|
MFD changes for 3.5
|
2012-05-29 11:53:11 -07:00 |
mc13xxx-i2c.c
|
mfd: Add mc13xxx i2c driver
|
2012-05-01 12:35:41 +02:00 |
mc13xxx-spi.c
|
mfd: mc13xxx workaround SPI hardware bug on i.Mx
|
2012-07-09 00:16:25 +02:00 |
mc13xxx.h
|
mfd: Move the mc13xxx-core spi specific code into a separate module
|
2012-05-01 12:35:40 +02:00 |
mcp-core.c
|
Disintegrate and delete asm/system.h
|
2012-03-28 15:58:21 -07:00 |
mcp-sa11x0.c
|
Disintegrate and delete asm/system.h
|
2012-03-28 15:58:21 -07:00 |
menelaus.c
|
Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6
|
2011-11-03 09:40:51 -07:00 |
mfd-core.c
|
mfd: Fix ACPI conflict check
|
2012-03-06 18:46:47 +01:00 |
omap-usb-host.c
|
mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues.
|
2012-07-09 00:16:25 +02:00 |
palmas.c
|
mfd: Add missing hunk to change palmas irq to clear on read
|
2012-07-09 00:16:26 +02:00 |
pcf50633-adc.c
|
mfd: Convert MFD drivers to use module_platform_driver
|
2012-01-09 00:37:31 +01:00 |
pcf50633-core.c
|
mfd: Convert pcf50633-core to use devm_* APIs
|
2012-05-20 17:27:04 +02:00 |
pcf50633-gpio.c
|
mfd: Include linux/mfd/pcf50633/pmic.h in pcf50633-gpio.c
|
2012-03-06 18:46:51 +01:00 |
pcf50633-irq.c
|
mfd: Include linux/mfd/pcf50633/mbc.h in pcf50633-irq.c
|
2012-03-06 18:46:51 +01:00 |
pm8xxx-irq.c
|
|
|
pm8921-core.c
|
|
|
rc5t583-irq.c
|
mfd: Add support for RICOH PMIC RC5T583
|
2012-03-16 20:05:45 +01:00 |
rc5t583.c
|
mfd: Convert rc5t583 to devm_regmap_init_i2c()
|
2012-05-09 17:50:29 +02:00 |
rdc321x-southbridge.c
|
mfd: Use module_pci_driver
|
2012-05-01 12:00:21 +02:00 |
s5m-core.c
|
mfd: Convert s5m-core to devm_regmap_init_i2c()
|
2012-05-09 17:50:53 +02:00 |
s5m-irq.c
|
mfd: Fix s5m error handling for invalid device type
|
2012-03-06 18:46:35 +01:00 |
sm501.c
|
mfd: Use DIV_ROUND_CLOSEST for sm501 clock
|
2012-03-16 20:37:47 +01:00 |
sta2x11-mfd.c
|
mfd: Add driver for STA2X11 MFD block
|
2012-05-09 15:34:28 +02:00 |
stmpe-i2c.c
|
Viresh has moved
|
2012-06-20 14:39:36 -07:00 |
stmpe-spi.c
|
Viresh has moved
|
2012-06-20 14:39:36 -07:00 |
stmpe.c
|
mfd: Add support for no-interrupt stmpe config
|
2012-03-06 18:46:38 +01:00 |
stmpe.h
|
mfd: Add support for stmpe variant 801
|
2012-01-09 00:37:44 +01:00 |
t7l66xb.c
|
mfd: Convert MFD drivers to use module_platform_driver
|
2012-01-09 00:37:31 +01:00 |
tc3589x.c
|
mfd: Add missing #ifdef around tc3589x PM block
|
2011-10-24 14:09:09 +02:00 |
tc6387xb.c
|
mfd: Convert MFD drivers to use module_platform_driver
|
2012-01-09 00:37:31 +01:00 |
tc6393xb.c
|
|
|
ti-ssp.c
|
mfd: Convert MFD drivers to use module_platform_driver
|
2012-01-09 00:37:31 +01:00 |
timberdale.c
|
mfd: Convert to DEFINE_PCI_DEVICE_TABLE
|
2012-01-09 00:37:37 +01:00 |
timberdale.h
|
|
|
tmio_core.c
|
mfd: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required
|
2011-10-31 19:32:05 -04:00 |
tps6105x.c
|
|
|
tps6507x.c
|
|
|
tps6586x.c
|
tps6586x: Add device tree support
|
2012-05-04 13:25:16 +01:00 |
tps65010.c
|
|
|
tps65090.c
|
MFD changes for 3.5
|
2012-05-29 11:53:11 -07:00 |
tps65217.c
|
regulator: tps65217: Add device tree support
|
2012-07-12 18:27:36 +01:00 |
tps65910-irq.c
|
mfd: Add tps65910-irq devicetree init and irqdomain support
|
2012-05-20 17:27:08 +02:00 |
tps65910.c
|
mfd: Remove the parsing of dt info for tps65910 gpio
|
2012-05-22 23:49:52 +02:00 |
tps65911-comparator.c
|
Fix typo milivolt => millivolt
|
2012-04-05 16:58:23 -07:00 |
tps65912-core.c
|
mfd: Initialize tps65912 irq platform data properly
|
2012-03-06 18:46:47 +01:00 |
tps65912-i2c.c
|
|
|
tps65912-irq.c
|
|
|
tps65912-spi.c
|
mfd: Remove redundant spi driver bus initialization
|
2012-01-09 00:37:31 +01:00 |
twl4030-audio.c
|
mfd: Convert MFD drivers to use module_platform_driver
|
2012-01-09 00:37:31 +01:00 |
twl4030-irq.c
|
mfd: enable wakeup on twl4030 IRQ.
|
2012-05-09 18:02:51 +02:00 |
twl4030-madc.c
|
mfd: Convert MFD drivers to use module_platform_driver
|
2012-01-09 00:37:31 +01:00 |
twl4030-power.c
|
ARM: omap: fix section mismatch errors in TWL PMIC driver
|
2012-02-13 10:00:35 +00:00 |
twl6030-irq.c
|
mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups
|
2012-03-22 13:05:34 +01:00 |
twl6030-pwm.c
|
|
|
twl6040-core.c
|
mfd: Fix twl6040 build failure
|
2012-05-23 16:24:14 +02:00 |
twl6040-irq.c
|
mfd: Add support for Device Tree to twl6040
|
2012-05-20 17:27:12 +02:00 |
twl-core.c
|
mfd: Define all twl-regulator feature flags in one place
|
2012-05-20 17:26:58 +02:00 |
twl-core.h
|
mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files
|
2012-03-22 13:04:33 +01:00 |
ucb1x00-assabet.c
|
MFD: ucb1x00-assabet: add support for UCB1x00 GPIO switches
|
2012-02-18 23:15:44 +00:00 |
ucb1x00-core.c
|
MFD: ucb1x00-core: add wakeup support
|
2012-02-18 23:15:43 +00:00 |
ucb1x00-ts.c
|
MFD: ucb1x00: convert to use genirq
|
2012-02-18 23:15:43 +00:00 |
ucb1400_core.c
|
|
|
vx855.c
|
mfd: Use module_pci_driver
|
2012-05-01 12:00:21 +02:00 |
wl1273-core.c
|
mfd: Add module.h to the implicit drivers/mfd users
|
2011-10-31 19:32:04 -04:00 |
wm831x-auxadc.c
|
mfd: Convert wm831x to irq_domain
|
2012-05-20 17:27:07 +02:00 |
wm831x-core.c
|
mfd: Convert wm831x to irq_domain
|
2012-05-20 17:27:07 +02:00 |
wm831x-i2c.c
|
mfd: wm831x: Convert to devm_regmap_init()
|
2012-02-22 13:57:05 +00:00 |
wm831x-irq.c
|
mfd: Emulate active low IRQs as well as active high IRQs for wm831x
|
2012-05-20 17:27:14 +02:00 |
wm831x-otp.c
|
|
|
wm831x-spi.c
|
MFD changes for 3.4
|
2012-03-28 13:56:35 -07:00 |
wm8350-core.c
|
mfd: Convert wm8350 physical I/O to regmap API
|
2012-05-07 11:32:08 +02:00 |
wm8350-gpio.c
|
|
|
wm8350-i2c.c
|
mfd: Fix double free in wm8350 error path
|
2012-05-20 17:27:09 +02:00 |
wm8350-irq.c
|
mfd: wm8350 variable dereferenced before check
|
2012-03-06 18:46:34 +01:00 |
wm8350-regmap.c
|
|
|
wm8400-core.c
|
mfd: Export wm8400_block_read()
|
2012-05-20 17:27:05 +02:00 |
wm8994-core.c
|
mfd: Convert wm8994 to module_i2c_driver()
|
2012-05-07 11:32:09 +02:00 |
wm8994-irq.c
|
mfd: wm8994: Update to fully use irq_domain
|
2012-05-15 18:57:25 +01:00 |
wm8994-regmap.c
|
mfd: Cache wm8994 chip revision
|
2012-05-01 12:00:21 +02:00 |
wm8994.h
|
mfd: Initialise WM8994 register cache after reading chip ID registers
|
2011-12-13 00:11:13 +08:00 |