linux/Documentation/video4linux
Hans Verkuil 38913a5cc5 [media] vivid.txt: document new controls
Document the new 'Y'CbCr Encoding' and 'Quantization' controls.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-16 23:21:37 -02:00
..
bttv
cx88
cx2341x
4CCs.txt
API.html
cafe_ccic
CARDLIST.au0828
CARDLIST.bttv
CARDLIST.cx88
CARDLIST.cx23885
CARDLIST.em28xx
CARDLIST.ivtv
CARDLIST.saa7134
CARDLIST.saa7164
CARDLIST.tm6000
CARDLIST.tuner
CARDLIST.usbvision
cpia2_overview.txt
CQcam.txt
cx18.txt
extract_xc3028.pl
fimc.txt
gspca.txt
hauppauge-wintv-cx88-ir.txt
lifeview.txt
Makefile
meye.txt
not-in-cx2388x-datasheet.txt
omap3isp.txt
omap4_camera.txt
pxa_camera.txt
radiotrack.txt
README.cpia2
README.cx88
README.davinci-vpbe
README.ir
README.ivtv
README.pvrusb2
README.saa7134
README.tlg2300
sh_mobile_ceu_camera.txt
si470x.txt
si476x.txt
si4713.txt
soc-camera.txt [media] platform: Make use of media_bus_format enum 2014-11-14 17:54:08 -02:00
uvcvideo.txt
v4l2-controls.txt
v4l2-framework.txt
v4l2-pci-skeleton.c
videobuf
vivid.txt [media] vivid.txt: document new controls 2014-12-16 23:21:37 -02:00
w9966.txt
Zoran
zr364xx.txt

tlg2300 release notes
====================

This is a v4l2/dvb device driver for the tlg2300 chip.


current status
==============

video
	- support mmap and read().(no overlay)

audio
	- The driver will register a ALSA card for the audio input.

vbi
	- Works for almost TV norms.

dvb-t
	- works for DVB-T

FM
	- Works for radio.

---------------------------------------------------------------------------
TESTED APPLICATIONS:

-VLC1.0.4 test the video and dvb. The GUI is friendly to use.

-Mplayer test the video.

-Mplayer test the FM. The mplayer should be compiled with --enable-radio and
	 --enable-radio-capture.
	The command runs as this(The alsa audio registers to card 1):
	#mplayer radio://103.7/capture/ -radio adevice=hw=1,0:arate=48000 \
		-rawaudio rate=48000:channels=2

---------------------------------------------------------------------------
KNOWN PROBLEMS:
about preemphasis:
	You can set the preemphasis for radio by the following command:
	#v4l2-ctl -d /dev/radio0 --set-ctrl=pre_emphasis_settings=1

	"pre_emphasis_settings=1" means that you select the 50us. If you want
	to select the 75us, please use "pre_emphasis_settings=2"