mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-23 18:07:03 +00:00
ffadcc2ff4
When changing power states from D0->DX and then from DX->D0, some Intel PCIE chipsets will cause a device reset to occur. This will cause problems for any D State other than D3, since any state information that the driver will expect to be present coming from a D1 or D2 state will have been cleared. This patch addes a flag to the pci_dev structure to indicate that devices should not use states D1 or D2, and will set that flag for the affected chipsets. This patch also modifies pci_set_power_state() so that when a device driver tries to set the power state on a device that is downstream from an affected chipset, or on one of the affected devices it only allows state changes to or from D0 & D3. In addition, this patch allows the delay time between D3->D0 to be changed via a quirk. These chipsets also need additional time to change states beyond the normal 10ms. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
---|---|---|
.. | ||
hotplug | ||
pcie | ||
.gitignore | ||
access.c | ||
bus.c | ||
hotplug.c | ||
Kconfig | ||
Makefile | ||
msi-altix.c | ||
msi-apic.c | ||
msi.c | ||
msi.h | ||
pci-acpi.c | ||
pci-driver.c | ||
pci-sysfs.c | ||
pci.c | ||
pci.h | ||
probe.c | ||
proc.c | ||
quirks.c | ||
remove.c | ||
rom.c | ||
search.c | ||
setup-bus.c | ||
setup-irq.c | ||
setup-res.c | ||
syscall.c |