mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-21 00:42:16 +00:00
438ac6d5e3
Add missing #ifdef CONFIG_PM conditionals around all PM related parts in libata LLDs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
1664 lines
46 KiB
C
1664 lines
46 KiB
C
/*
|
|
* sata_nv.c - NVIDIA nForce SATA
|
|
*
|
|
* Copyright 2004 NVIDIA Corp. All rights reserved.
|
|
* Copyright 2004 Andrew Chew
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* No hardware documentation available outside of NVIDIA.
|
|
* This driver programs the NVIDIA SATA controller in a similar
|
|
* fashion as with other PCI IDE BMDMA controllers, with a few
|
|
* NV-specific details such as register offsets, SATA phy location,
|
|
* hotplug info, etc.
|
|
*
|
|
* CK804/MCP04 controllers support an alternate programming interface
|
|
* similar to the ADMA specification (with some modifications).
|
|
* This allows the use of NCQ. Non-DMA-mapped ATA commands are still
|
|
* sent through the legacy interface.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "sata_nv"
|
|
#define DRV_VERSION "3.3"
|
|
|
|
#define NV_ADMA_DMA_BOUNDARY 0xffffffffUL
|
|
|
|
enum {
|
|
NV_MMIO_BAR = 5,
|
|
|
|
NV_PORTS = 2,
|
|
NV_PIO_MASK = 0x1f,
|
|
NV_MWDMA_MASK = 0x07,
|
|
NV_UDMA_MASK = 0x7f,
|
|
NV_PORT0_SCR_REG_OFFSET = 0x00,
|
|
NV_PORT1_SCR_REG_OFFSET = 0x40,
|
|
|
|
/* INT_STATUS/ENABLE */
|
|
NV_INT_STATUS = 0x10,
|
|
NV_INT_ENABLE = 0x11,
|
|
NV_INT_STATUS_CK804 = 0x440,
|
|
NV_INT_ENABLE_CK804 = 0x441,
|
|
|
|
/* INT_STATUS/ENABLE bits */
|
|
NV_INT_DEV = 0x01,
|
|
NV_INT_PM = 0x02,
|
|
NV_INT_ADDED = 0x04,
|
|
NV_INT_REMOVED = 0x08,
|
|
|
|
NV_INT_PORT_SHIFT = 4, /* each port occupies 4 bits */
|
|
|
|
NV_INT_ALL = 0x0f,
|
|
NV_INT_MASK = NV_INT_DEV |
|
|
NV_INT_ADDED | NV_INT_REMOVED,
|
|
|
|
/* INT_CONFIG */
|
|
NV_INT_CONFIG = 0x12,
|
|
NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI
|
|
|
|
// For PCI config register 20
|
|
NV_MCP_SATA_CFG_20 = 0x50,
|
|
NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04,
|
|
NV_MCP_SATA_CFG_20_PORT0_EN = (1 << 17),
|
|
NV_MCP_SATA_CFG_20_PORT1_EN = (1 << 16),
|
|
NV_MCP_SATA_CFG_20_PORT0_PWB_EN = (1 << 14),
|
|
NV_MCP_SATA_CFG_20_PORT1_PWB_EN = (1 << 12),
|
|
|
|
NV_ADMA_MAX_CPBS = 32,
|
|
NV_ADMA_CPB_SZ = 128,
|
|
NV_ADMA_APRD_SZ = 16,
|
|
NV_ADMA_SGTBL_LEN = (1024 - NV_ADMA_CPB_SZ) /
|
|
NV_ADMA_APRD_SZ,
|
|
NV_ADMA_SGTBL_TOTAL_LEN = NV_ADMA_SGTBL_LEN + 5,
|
|
NV_ADMA_SGTBL_SZ = NV_ADMA_SGTBL_LEN * NV_ADMA_APRD_SZ,
|
|
NV_ADMA_PORT_PRIV_DMA_SZ = NV_ADMA_MAX_CPBS *
|
|
(NV_ADMA_CPB_SZ + NV_ADMA_SGTBL_SZ),
|
|
|
|
/* BAR5 offset to ADMA general registers */
|
|
NV_ADMA_GEN = 0x400,
|
|
NV_ADMA_GEN_CTL = 0x00,
|
|
NV_ADMA_NOTIFIER_CLEAR = 0x30,
|
|
|
|
/* BAR5 offset to ADMA ports */
|
|
NV_ADMA_PORT = 0x480,
|
|
|
|
/* size of ADMA port register space */
|
|
NV_ADMA_PORT_SIZE = 0x100,
|
|
|
|
/* ADMA port registers */
|
|
NV_ADMA_CTL = 0x40,
|
|
NV_ADMA_CPB_COUNT = 0x42,
|
|
NV_ADMA_NEXT_CPB_IDX = 0x43,
|
|
NV_ADMA_STAT = 0x44,
|
|
NV_ADMA_CPB_BASE_LOW = 0x48,
|
|
NV_ADMA_CPB_BASE_HIGH = 0x4C,
|
|
NV_ADMA_APPEND = 0x50,
|
|
NV_ADMA_NOTIFIER = 0x68,
|
|
NV_ADMA_NOTIFIER_ERROR = 0x6C,
|
|
|
|
/* NV_ADMA_CTL register bits */
|
|
NV_ADMA_CTL_HOTPLUG_IEN = (1 << 0),
|
|
NV_ADMA_CTL_CHANNEL_RESET = (1 << 5),
|
|
NV_ADMA_CTL_GO = (1 << 7),
|
|
NV_ADMA_CTL_AIEN = (1 << 8),
|
|
NV_ADMA_CTL_READ_NON_COHERENT = (1 << 11),
|
|
NV_ADMA_CTL_WRITE_NON_COHERENT = (1 << 12),
|
|
|
|
/* CPB response flag bits */
|
|
NV_CPB_RESP_DONE = (1 << 0),
|
|
NV_CPB_RESP_ATA_ERR = (1 << 3),
|
|
NV_CPB_RESP_CMD_ERR = (1 << 4),
|
|
NV_CPB_RESP_CPB_ERR = (1 << 7),
|
|
|
|
/* CPB control flag bits */
|
|
NV_CPB_CTL_CPB_VALID = (1 << 0),
|
|
NV_CPB_CTL_QUEUE = (1 << 1),
|
|
NV_CPB_CTL_APRD_VALID = (1 << 2),
|
|
NV_CPB_CTL_IEN = (1 << 3),
|
|
NV_CPB_CTL_FPDMA = (1 << 4),
|
|
|
|
/* APRD flags */
|
|
NV_APRD_WRITE = (1 << 1),
|
|
NV_APRD_END = (1 << 2),
|
|
NV_APRD_CONT = (1 << 3),
|
|
|
|
/* NV_ADMA_STAT flags */
|
|
NV_ADMA_STAT_TIMEOUT = (1 << 0),
|
|
NV_ADMA_STAT_HOTUNPLUG = (1 << 1),
|
|
NV_ADMA_STAT_HOTPLUG = (1 << 2),
|
|
NV_ADMA_STAT_CPBERR = (1 << 4),
|
|
NV_ADMA_STAT_SERROR = (1 << 5),
|
|
NV_ADMA_STAT_CMD_COMPLETE = (1 << 6),
|
|
NV_ADMA_STAT_IDLE = (1 << 8),
|
|
NV_ADMA_STAT_LEGACY = (1 << 9),
|
|
NV_ADMA_STAT_STOPPED = (1 << 10),
|
|
NV_ADMA_STAT_DONE = (1 << 12),
|
|
NV_ADMA_STAT_ERR = NV_ADMA_STAT_CPBERR |
|
|
NV_ADMA_STAT_TIMEOUT,
|
|
|
|
/* port flags */
|
|
NV_ADMA_PORT_REGISTER_MODE = (1 << 0),
|
|
NV_ADMA_ATAPI_SETUP_COMPLETE = (1 << 1),
|
|
|
|
};
|
|
|
|
/* ADMA Physical Region Descriptor - one SG segment */
|
|
struct nv_adma_prd {
|
|
__le64 addr;
|
|
__le32 len;
|
|
u8 flags;
|
|
u8 packet_len;
|
|
__le16 reserved;
|
|
};
|
|
|
|
enum nv_adma_regbits {
|
|
CMDEND = (1 << 15), /* end of command list */
|
|
WNB = (1 << 14), /* wait-not-BSY */
|
|
IGN = (1 << 13), /* ignore this entry */
|
|
CS1n = (1 << (4 + 8)), /* std. PATA signals follow... */
|
|
DA2 = (1 << (2 + 8)),
|
|
DA1 = (1 << (1 + 8)),
|
|
DA0 = (1 << (0 + 8)),
|
|
};
|
|
|
|
/* ADMA Command Parameter Block
|
|
The first 5 SG segments are stored inside the Command Parameter Block itself.
|
|
If there are more than 5 segments the remainder are stored in a separate
|
|
memory area indicated by next_aprd. */
|
|
struct nv_adma_cpb {
|
|
u8 resp_flags; /* 0 */
|
|
u8 reserved1; /* 1 */
|
|
u8 ctl_flags; /* 2 */
|
|
/* len is length of taskfile in 64 bit words */
|
|
u8 len; /* 3 */
|
|
u8 tag; /* 4 */
|
|
u8 next_cpb_idx; /* 5 */
|
|
__le16 reserved2; /* 6-7 */
|
|
__le16 tf[12]; /* 8-31 */
|
|
struct nv_adma_prd aprd[5]; /* 32-111 */
|
|
__le64 next_aprd; /* 112-119 */
|
|
__le64 reserved3; /* 120-127 */
|
|
};
|
|
|
|
|
|
struct nv_adma_port_priv {
|
|
struct nv_adma_cpb *cpb;
|
|
dma_addr_t cpb_dma;
|
|
struct nv_adma_prd *aprd;
|
|
dma_addr_t aprd_dma;
|
|
void __iomem * ctl_block;
|
|
void __iomem * gen_block;
|
|
void __iomem * notifier_clear_block;
|
|
u8 flags;
|
|
int last_issue_ncq;
|
|
};
|
|
|
|
struct nv_host_priv {
|
|
unsigned long type;
|
|
};
|
|
|
|
#define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & ( 1 << (19 + (12 * (PORT)))))
|
|
|
|
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static void nv_remove_one (struct pci_dev *pdev);
|
|
#ifdef CONFIG_PM
|
|
static int nv_pci_device_resume(struct pci_dev *pdev);
|
|
#endif
|
|
static void nv_ck804_host_stop(struct ata_host *host);
|
|
static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance);
|
|
static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance);
|
|
static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance);
|
|
static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg);
|
|
static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
|
|
|
|
static void nv_nf2_freeze(struct ata_port *ap);
|
|
static void nv_nf2_thaw(struct ata_port *ap);
|
|
static void nv_ck804_freeze(struct ata_port *ap);
|
|
static void nv_ck804_thaw(struct ata_port *ap);
|
|
static void nv_error_handler(struct ata_port *ap);
|
|
static int nv_adma_slave_config(struct scsi_device *sdev);
|
|
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
|
|
static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
|
|
static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc);
|
|
static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance);
|
|
static void nv_adma_irq_clear(struct ata_port *ap);
|
|
static int nv_adma_port_start(struct ata_port *ap);
|
|
static void nv_adma_port_stop(struct ata_port *ap);
|
|
#ifdef CONFIG_PM
|
|
static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg);
|
|
static int nv_adma_port_resume(struct ata_port *ap);
|
|
#endif
|
|
static void nv_adma_error_handler(struct ata_port *ap);
|
|
static void nv_adma_host_stop(struct ata_host *host);
|
|
static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc);
|
|
|
|
enum nv_host_type
|
|
{
|
|
GENERIC,
|
|
NFORCE2,
|
|
NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */
|
|
CK804,
|
|
ADMA
|
|
};
|
|
|
|
static const struct pci_device_id nv_pci_tbl[] = {
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), NFORCE2 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), NFORCE3 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), NFORCE3 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA), CK804 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), GENERIC },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), GENERIC },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), GENERIC },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), GENERIC },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
|
|
{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
|
|
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
|
|
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
|
|
PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_STORAGE_RAID<<8, 0xffff00, GENERIC },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver nv_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = nv_pci_tbl,
|
|
.probe = nv_init_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = nv_pci_device_resume,
|
|
#endif
|
|
.remove = nv_remove_one,
|
|
};
|
|
|
|
static struct scsi_host_template nv_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_scsi_device_suspend,
|
|
.resume = ata_scsi_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static struct scsi_host_template nv_adma_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = NV_ADMA_MAX_CPBS,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = NV_ADMA_DMA_BOUNDARY,
|
|
.slave_configure = nv_adma_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_scsi_device_suspend,
|
|
.resume = ata_scsi_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static const struct ata_port_operations nv_generic_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.exec_command = ata_exec_command,
|
|
.check_status = ata_check_status,
|
|
.dev_select = ata_std_dev_select,
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = nv_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.data_xfer = ata_data_xfer,
|
|
.irq_handler = nv_generic_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
.scr_read = nv_scr_read,
|
|
.scr_write = nv_scr_write,
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
static const struct ata_port_operations nv_nf2_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.exec_command = ata_exec_command,
|
|
.check_status = ata_check_status,
|
|
.dev_select = ata_std_dev_select,
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
.freeze = nv_nf2_freeze,
|
|
.thaw = nv_nf2_thaw,
|
|
.error_handler = nv_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.data_xfer = ata_data_xfer,
|
|
.irq_handler = nv_nf2_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
.scr_read = nv_scr_read,
|
|
.scr_write = nv_scr_write,
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
static const struct ata_port_operations nv_ck804_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.exec_command = ata_exec_command,
|
|
.check_status = ata_check_status,
|
|
.dev_select = ata_std_dev_select,
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
.freeze = nv_ck804_freeze,
|
|
.thaw = nv_ck804_thaw,
|
|
.error_handler = nv_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.data_xfer = ata_data_xfer,
|
|
.irq_handler = nv_ck804_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
.scr_read = nv_scr_read,
|
|
.scr_write = nv_scr_write,
|
|
.port_start = ata_port_start,
|
|
.host_stop = nv_ck804_host_stop,
|
|
};
|
|
|
|
static const struct ata_port_operations nv_adma_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_atapi_dma = nv_adma_check_atapi_dma,
|
|
.exec_command = ata_exec_command,
|
|
.check_status = ata_check_status,
|
|
.dev_select = ata_std_dev_select,
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = nv_adma_qc_prep,
|
|
.qc_issue = nv_adma_qc_issue,
|
|
.freeze = nv_ck804_freeze,
|
|
.thaw = nv_ck804_thaw,
|
|
.error_handler = nv_adma_error_handler,
|
|
.post_internal_cmd = nv_adma_post_internal_cmd,
|
|
.data_xfer = ata_data_xfer,
|
|
.irq_handler = nv_adma_interrupt,
|
|
.irq_clear = nv_adma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
.irq_ack = ata_irq_ack,
|
|
.scr_read = nv_scr_read,
|
|
.scr_write = nv_scr_write,
|
|
.port_start = nv_adma_port_start,
|
|
.port_stop = nv_adma_port_stop,
|
|
#ifdef CONFIG_PM
|
|
.port_suspend = nv_adma_port_suspend,
|
|
.port_resume = nv_adma_port_resume,
|
|
#endif
|
|
.host_stop = nv_adma_host_stop,
|
|
};
|
|
|
|
static struct ata_port_info nv_port_info[] = {
|
|
/* generic */
|
|
{
|
|
.sht = &nv_sht,
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_HRST_TO_RESUME,
|
|
.pio_mask = NV_PIO_MASK,
|
|
.mwdma_mask = NV_MWDMA_MASK,
|
|
.udma_mask = NV_UDMA_MASK,
|
|
.port_ops = &nv_generic_ops,
|
|
},
|
|
/* nforce2/3 */
|
|
{
|
|
.sht = &nv_sht,
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_HRST_TO_RESUME,
|
|
.pio_mask = NV_PIO_MASK,
|
|
.mwdma_mask = NV_MWDMA_MASK,
|
|
.udma_mask = NV_UDMA_MASK,
|
|
.port_ops = &nv_nf2_ops,
|
|
},
|
|
/* ck804 */
|
|
{
|
|
.sht = &nv_sht,
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_HRST_TO_RESUME,
|
|
.pio_mask = NV_PIO_MASK,
|
|
.mwdma_mask = NV_MWDMA_MASK,
|
|
.udma_mask = NV_UDMA_MASK,
|
|
.port_ops = &nv_ck804_ops,
|
|
},
|
|
/* ADMA */
|
|
{
|
|
.sht = &nv_adma_sht,
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_HRST_TO_RESUME |
|
|
ATA_FLAG_MMIO | ATA_FLAG_NCQ,
|
|
.pio_mask = NV_PIO_MASK,
|
|
.mwdma_mask = NV_MWDMA_MASK,
|
|
.udma_mask = NV_UDMA_MASK,
|
|
.port_ops = &nv_adma_ops,
|
|
},
|
|
};
|
|
|
|
MODULE_AUTHOR("NVIDIA");
|
|
MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
static int adma_enabled = 1;
|
|
|
|
static void nv_adma_register_mode(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
u16 tmp, status;
|
|
int count = 0;
|
|
|
|
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
|
|
return;
|
|
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
while(!(status & NV_ADMA_STAT_IDLE) && count < 20) {
|
|
ndelay(50);
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
count++;
|
|
}
|
|
if(count == 20)
|
|
ata_port_printk(ap, KERN_WARNING,
|
|
"timeout waiting for ADMA IDLE, stat=0x%hx\n",
|
|
status);
|
|
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
|
|
|
|
count = 0;
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
while(!(status & NV_ADMA_STAT_LEGACY) && count < 20) {
|
|
ndelay(50);
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
count++;
|
|
}
|
|
if(count == 20)
|
|
ata_port_printk(ap, KERN_WARNING,
|
|
"timeout waiting for ADMA LEGACY, stat=0x%hx\n",
|
|
status);
|
|
|
|
pp->flags |= NV_ADMA_PORT_REGISTER_MODE;
|
|
}
|
|
|
|
static void nv_adma_mode(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
u16 tmp, status;
|
|
int count = 0;
|
|
|
|
if (!(pp->flags & NV_ADMA_PORT_REGISTER_MODE))
|
|
return;
|
|
|
|
WARN_ON(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE);
|
|
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew(tmp | NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
|
|
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
while(((status & NV_ADMA_STAT_LEGACY) ||
|
|
!(status & NV_ADMA_STAT_IDLE)) && count < 20) {
|
|
ndelay(50);
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
count++;
|
|
}
|
|
if(count == 20)
|
|
ata_port_printk(ap, KERN_WARNING,
|
|
"timeout waiting for ADMA LEGACY clear and IDLE, stat=0x%hx\n",
|
|
status);
|
|
|
|
pp->flags &= ~NV_ADMA_PORT_REGISTER_MODE;
|
|
}
|
|
|
|
static int nv_adma_slave_config(struct scsi_device *sdev)
|
|
{
|
|
struct ata_port *ap = ata_shost_to_port(sdev->host);
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u64 bounce_limit;
|
|
unsigned long segment_boundary;
|
|
unsigned short sg_tablesize;
|
|
int rc;
|
|
int adma_enable;
|
|
u32 current_reg, new_reg, config_mask;
|
|
|
|
rc = ata_scsi_slave_config(sdev);
|
|
|
|
if (sdev->id >= ATA_MAX_DEVICES || sdev->channel || sdev->lun)
|
|
/* Not a proper libata device, ignore */
|
|
return rc;
|
|
|
|
if (ap->device[sdev->id].class == ATA_DEV_ATAPI) {
|
|
/*
|
|
* NVIDIA reports that ADMA mode does not support ATAPI commands.
|
|
* Therefore ATAPI commands are sent through the legacy interface.
|
|
* However, the legacy interface only supports 32-bit DMA.
|
|
* Restrict DMA parameters as required by the legacy interface
|
|
* when an ATAPI device is connected.
|
|
*/
|
|
bounce_limit = ATA_DMA_MASK;
|
|
segment_boundary = ATA_DMA_BOUNDARY;
|
|
/* Subtract 1 since an extra entry may be needed for padding, see
|
|
libata-scsi.c */
|
|
sg_tablesize = LIBATA_MAX_PRD - 1;
|
|
|
|
/* Since the legacy DMA engine is in use, we need to disable ADMA
|
|
on the port. */
|
|
adma_enable = 0;
|
|
nv_adma_register_mode(ap);
|
|
}
|
|
else {
|
|
bounce_limit = *ap->dev->dma_mask;
|
|
segment_boundary = NV_ADMA_DMA_BOUNDARY;
|
|
sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN;
|
|
adma_enable = 1;
|
|
}
|
|
|
|
pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, ¤t_reg);
|
|
|
|
if(ap->port_no == 1)
|
|
config_mask = NV_MCP_SATA_CFG_20_PORT1_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_PWB_EN;
|
|
else
|
|
config_mask = NV_MCP_SATA_CFG_20_PORT0_EN |
|
|
NV_MCP_SATA_CFG_20_PORT0_PWB_EN;
|
|
|
|
if(adma_enable) {
|
|
new_reg = current_reg | config_mask;
|
|
pp->flags &= ~NV_ADMA_ATAPI_SETUP_COMPLETE;
|
|
}
|
|
else {
|
|
new_reg = current_reg & ~config_mask;
|
|
pp->flags |= NV_ADMA_ATAPI_SETUP_COMPLETE;
|
|
}
|
|
|
|
if(current_reg != new_reg)
|
|
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, new_reg);
|
|
|
|
blk_queue_bounce_limit(sdev->request_queue, bounce_limit);
|
|
blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
|
|
blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize);
|
|
ata_port_printk(ap, KERN_INFO,
|
|
"bounce limit 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
|
|
(unsigned long long)bounce_limit, segment_boundary, sg_tablesize);
|
|
return rc;
|
|
}
|
|
|
|
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
struct nv_adma_port_priv *pp = qc->ap->private_data;
|
|
return !(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE);
|
|
}
|
|
|
|
static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
|
|
{
|
|
unsigned int idx = 0;
|
|
|
|
if(tf->flags & ATA_TFLAG_ISADDR) {
|
|
if (tf->flags & ATA_TFLAG_LBA48) {
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->hob_feature | WNB);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->hob_nsect);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->hob_lbal);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->hob_lbam);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->hob_lbah);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature);
|
|
} else
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_ERR << 8) | tf->feature | WNB);
|
|
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_NSECT << 8) | tf->nsect);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_LBAL << 8) | tf->lbal);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_LBAM << 8) | tf->lbam);
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_LBAH << 8) | tf->lbah);
|
|
}
|
|
|
|
if(tf->flags & ATA_TFLAG_DEVICE)
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_DEVICE << 8) | tf->device);
|
|
|
|
cpb[idx++] = cpu_to_le16((ATA_REG_CMD << 8) | tf->command | CMDEND);
|
|
|
|
while(idx < 12)
|
|
cpb[idx++] = cpu_to_le16(IGN);
|
|
|
|
return idx;
|
|
}
|
|
|
|
static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
u8 flags = pp->cpb[cpb_num].resp_flags;
|
|
|
|
VPRINTK("CPB %d, flags=0x%x\n", cpb_num, flags);
|
|
|
|
if (unlikely((force_err ||
|
|
flags & (NV_CPB_RESP_ATA_ERR |
|
|
NV_CPB_RESP_CMD_ERR |
|
|
NV_CPB_RESP_CPB_ERR)))) {
|
|
struct ata_eh_info *ehi = &ap->eh_info;
|
|
int freeze = 0;
|
|
|
|
ata_ehi_clear_desc(ehi);
|
|
ata_ehi_push_desc(ehi, "CPB resp_flags 0x%x", flags );
|
|
if (flags & NV_CPB_RESP_ATA_ERR) {
|
|
ata_ehi_push_desc(ehi, ": ATA error");
|
|
ehi->err_mask |= AC_ERR_DEV;
|
|
} else if (flags & NV_CPB_RESP_CMD_ERR) {
|
|
ata_ehi_push_desc(ehi, ": CMD error");
|
|
ehi->err_mask |= AC_ERR_DEV;
|
|
} else if (flags & NV_CPB_RESP_CPB_ERR) {
|
|
ata_ehi_push_desc(ehi, ": CPB error");
|
|
ehi->err_mask |= AC_ERR_SYSTEM;
|
|
freeze = 1;
|
|
} else {
|
|
/* notifier error, but no error in CPB flags? */
|
|
ehi->err_mask |= AC_ERR_OTHER;
|
|
freeze = 1;
|
|
}
|
|
/* Kill all commands. EH will determine what actually failed. */
|
|
if (freeze)
|
|
ata_port_freeze(ap);
|
|
else
|
|
ata_port_abort(ap);
|
|
return 1;
|
|
}
|
|
|
|
if (flags & NV_CPB_RESP_DONE) {
|
|
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, cpb_num);
|
|
VPRINTK("CPB flags done, flags=0x%x\n", flags);
|
|
if (likely(qc)) {
|
|
/* Grab the ATA port status for non-NCQ commands.
|
|
For NCQ commands the current status may have nothing to do with
|
|
the command just completed. */
|
|
if (qc->tf.protocol != ATA_PROT_NCQ) {
|
|
u8 ata_status = readb(pp->ctl_block + (ATA_REG_STATUS * 4));
|
|
qc->err_mask |= ac_err_mask(ata_status);
|
|
}
|
|
DPRINTK("Completing qc from tag %d with err_mask %u\n",cpb_num,
|
|
qc->err_mask);
|
|
ata_qc_complete(qc);
|
|
} else {
|
|
struct ata_eh_info *ehi = &ap->eh_info;
|
|
/* Notifier bits set without a command may indicate the drive
|
|
is misbehaving. Raise host state machine violation on this
|
|
condition. */
|
|
ata_port_printk(ap, KERN_ERR, "notifier for tag %d with no command?\n",
|
|
cpb_num);
|
|
ehi->err_mask |= AC_ERR_HSM;
|
|
ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_port_freeze(ap);
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
|
|
{
|
|
struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
|
|
/* freeze if hotplugged */
|
|
if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) {
|
|
ata_port_freeze(ap);
|
|
return 1;
|
|
}
|
|
|
|
/* bail out if not our interrupt */
|
|
if (!(irq_stat & NV_INT_DEV))
|
|
return 0;
|
|
|
|
/* DEV interrupt w/ no active qc? */
|
|
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
|
|
ata_check_status(ap);
|
|
return 1;
|
|
}
|
|
|
|
/* handle interrupt */
|
|
return ata_host_intr(ap, qc);
|
|
}
|
|
|
|
static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
int i, handled = 0;
|
|
u32 notifier_clears[2];
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
notifier_clears[i] = 0;
|
|
|
|
if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
u16 status;
|
|
u32 gen_ctl;
|
|
u32 notifier, notifier_error;
|
|
|
|
/* if in ATA register mode, use standard ata interrupt handler */
|
|
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
|
|
u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804)
|
|
>> (NV_INT_PORT_SHIFT * i);
|
|
if(ata_tag_valid(ap->active_tag))
|
|
/** NV_INT_DEV indication seems unreliable at times
|
|
at least in ADMA mode. Force it on always when a
|
|
command is active, to prevent losing interrupts. */
|
|
irq_stat |= NV_INT_DEV;
|
|
handled += nv_host_intr(ap, irq_stat);
|
|
continue;
|
|
}
|
|
|
|
notifier = readl(mmio + NV_ADMA_NOTIFIER);
|
|
notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
|
|
notifier_clears[i] = notifier | notifier_error;
|
|
|
|
gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
|
|
|
|
if( !NV_ADMA_CHECK_INTR(gen_ctl, ap->port_no) && !notifier &&
|
|
!notifier_error)
|
|
/* Nothing to do */
|
|
continue;
|
|
|
|
status = readw(mmio + NV_ADMA_STAT);
|
|
|
|
/* Clear status. Ensure the controller sees the clearing before we start
|
|
looking at any of the CPB statuses, so that any CPB completions after
|
|
this point in the handler will raise another interrupt. */
|
|
writew(status, mmio + NV_ADMA_STAT);
|
|
readw(mmio + NV_ADMA_STAT); /* flush posted write */
|
|
rmb();
|
|
|
|
handled++; /* irq handled if we got here */
|
|
|
|
/* freeze if hotplugged or controller error */
|
|
if (unlikely(status & (NV_ADMA_STAT_HOTPLUG |
|
|
NV_ADMA_STAT_HOTUNPLUG |
|
|
NV_ADMA_STAT_TIMEOUT |
|
|
NV_ADMA_STAT_SERROR))) {
|
|
struct ata_eh_info *ehi = &ap->eh_info;
|
|
|
|
ata_ehi_clear_desc(ehi);
|
|
ata_ehi_push_desc(ehi, "ADMA status 0x%08x", status );
|
|
if (status & NV_ADMA_STAT_TIMEOUT) {
|
|
ehi->err_mask |= AC_ERR_SYSTEM;
|
|
ata_ehi_push_desc(ehi, ": timeout");
|
|
} else if (status & NV_ADMA_STAT_HOTPLUG) {
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_ehi_push_desc(ehi, ": hotplug");
|
|
} else if (status & NV_ADMA_STAT_HOTUNPLUG) {
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_ehi_push_desc(ehi, ": hot unplug");
|
|
} else if (status & NV_ADMA_STAT_SERROR) {
|
|
/* let libata analyze SError and figure out the cause */
|
|
ata_ehi_push_desc(ehi, ": SError");
|
|
}
|
|
ata_port_freeze(ap);
|
|
continue;
|
|
}
|
|
|
|
if (status & (NV_ADMA_STAT_DONE |
|
|
NV_ADMA_STAT_CPBERR)) {
|
|
u32 check_commands = notifier | notifier_error;
|
|
int pos, error = 0;
|
|
/** Check CPBs for completed commands */
|
|
while ((pos = ffs(check_commands)) && !error) {
|
|
pos--;
|
|
error = nv_adma_check_cpb(ap, pos,
|
|
notifier_error & (1 << pos) );
|
|
check_commands &= ~(1 << pos );
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if(notifier_clears[0] || notifier_clears[1]) {
|
|
/* Note: Both notifier clear registers must be written
|
|
if either is set, even if one is zero, according to NVIDIA. */
|
|
struct nv_adma_port_priv *pp = host->ports[0]->private_data;
|
|
writel(notifier_clears[0], pp->notifier_clear_block);
|
|
pp = host->ports[1]->private_data;
|
|
writel(notifier_clears[1], pp->notifier_clear_block);
|
|
}
|
|
|
|
spin_unlock(&host->lock);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void nv_adma_irq_clear(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
u16 status = readw(mmio + NV_ADMA_STAT);
|
|
u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
|
|
u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
|
|
void __iomem *dma_stat_addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
|
|
|
|
/* clear ADMA status */
|
|
writew(status, mmio + NV_ADMA_STAT);
|
|
writel(notifier | notifier_error,
|
|
pp->notifier_clear_block);
|
|
|
|
/** clear legacy status */
|
|
iowrite8(ioread8(dma_stat_addr), dma_stat_addr);
|
|
}
|
|
|
|
static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
struct nv_adma_port_priv *pp = qc->ap->private_data;
|
|
|
|
if(pp->flags & NV_ADMA_PORT_REGISTER_MODE)
|
|
ata_bmdma_post_internal_cmd(qc);
|
|
}
|
|
|
|
static int nv_adma_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct nv_adma_port_priv *pp;
|
|
int rc;
|
|
void *mem;
|
|
dma_addr_t mem_dma;
|
|
void __iomem *mmio;
|
|
u16 tmp;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
rc = ata_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
|
|
mmio = ap->host->iomap[NV_MMIO_BAR] + NV_ADMA_PORT +
|
|
ap->port_no * NV_ADMA_PORT_SIZE;
|
|
pp->ctl_block = mmio;
|
|
pp->gen_block = ap->host->iomap[NV_MMIO_BAR] + NV_ADMA_GEN;
|
|
pp->notifier_clear_block = pp->gen_block +
|
|
NV_ADMA_NOTIFIER_CLEAR + (4 * ap->port_no);
|
|
|
|
mem = dmam_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ,
|
|
&mem_dma, GFP_KERNEL);
|
|
if (!mem)
|
|
return -ENOMEM;
|
|
memset(mem, 0, NV_ADMA_PORT_PRIV_DMA_SZ);
|
|
|
|
/*
|
|
* First item in chunk of DMA memory:
|
|
* 128-byte command parameter block (CPB)
|
|
* one for each command tag
|
|
*/
|
|
pp->cpb = mem;
|
|
pp->cpb_dma = mem_dma;
|
|
|
|
writel(mem_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
|
|
writel((mem_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
|
|
|
|
mem += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
|
|
mem_dma += NV_ADMA_MAX_CPBS * NV_ADMA_CPB_SZ;
|
|
|
|
/*
|
|
* Second item: block of ADMA_SGTBL_LEN s/g entries
|
|
*/
|
|
pp->aprd = mem;
|
|
pp->aprd_dma = mem_dma;
|
|
|
|
ap->private_data = pp;
|
|
|
|
/* clear any outstanding interrupt conditions */
|
|
writew(0xffff, mmio + NV_ADMA_STAT);
|
|
|
|
/* initialize port variables */
|
|
pp->flags = NV_ADMA_PORT_REGISTER_MODE;
|
|
|
|
/* clear CPB fetch count */
|
|
writew(0, mmio + NV_ADMA_CPB_COUNT);
|
|
|
|
/* clear GO for register mode, enable interrupt */
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
|
|
NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
|
|
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
|
|
readw( mmio + NV_ADMA_CTL ); /* flush posted write */
|
|
udelay(1);
|
|
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
|
|
readw( mmio + NV_ADMA_CTL ); /* flush posted write */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nv_adma_port_stop(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
|
|
VPRINTK("ENTER\n");
|
|
writew(0, mmio + NV_ADMA_CTL);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int nv_adma_port_suspend(struct ata_port *ap, pm_message_t mesg)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
|
|
/* Go to register mode - clears GO */
|
|
nv_adma_register_mode(ap);
|
|
|
|
/* clear CPB fetch count */
|
|
writew(0, mmio + NV_ADMA_CPB_COUNT);
|
|
|
|
/* disable interrupt, shut down port */
|
|
writew(0, mmio + NV_ADMA_CTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nv_adma_port_resume(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
u16 tmp;
|
|
|
|
/* set CPB block location */
|
|
writel(pp->cpb_dma & 0xFFFFFFFF, mmio + NV_ADMA_CPB_BASE_LOW);
|
|
writel((pp->cpb_dma >> 16 ) >> 16, mmio + NV_ADMA_CPB_BASE_HIGH);
|
|
|
|
/* clear any outstanding interrupt conditions */
|
|
writew(0xffff, mmio + NV_ADMA_STAT);
|
|
|
|
/* initialize port variables */
|
|
pp->flags |= NV_ADMA_PORT_REGISTER_MODE;
|
|
|
|
/* clear CPB fetch count */
|
|
writew(0, mmio + NV_ADMA_CPB_COUNT);
|
|
|
|
/* clear GO for register mode, enable interrupt */
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
|
|
NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);
|
|
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
|
|
readw( mmio + NV_ADMA_CTL ); /* flush posted write */
|
|
udelay(1);
|
|
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
|
|
readw( mmio + NV_ADMA_CTL ); /* flush posted write */
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void nv_adma_setup_port(struct ata_probe_ent *probe_ent, unsigned int port)
|
|
{
|
|
void __iomem *mmio = probe_ent->iomap[NV_MMIO_BAR];
|
|
struct ata_ioports *ioport = &probe_ent->port[port];
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
mmio += NV_ADMA_PORT + port * NV_ADMA_PORT_SIZE;
|
|
|
|
ioport->cmd_addr = mmio;
|
|
ioport->data_addr = mmio + (ATA_REG_DATA * 4);
|
|
ioport->error_addr =
|
|
ioport->feature_addr = mmio + (ATA_REG_ERR * 4);
|
|
ioport->nsect_addr = mmio + (ATA_REG_NSECT * 4);
|
|
ioport->lbal_addr = mmio + (ATA_REG_LBAL * 4);
|
|
ioport->lbam_addr = mmio + (ATA_REG_LBAM * 4);
|
|
ioport->lbah_addr = mmio + (ATA_REG_LBAH * 4);
|
|
ioport->device_addr = mmio + (ATA_REG_DEVICE * 4);
|
|
ioport->status_addr =
|
|
ioport->command_addr = mmio + (ATA_REG_STATUS * 4);
|
|
ioport->altstatus_addr =
|
|
ioport->ctl_addr = mmio + 0x20;
|
|
}
|
|
|
|
static int nv_adma_host_init(struct ata_probe_ent *probe_ent)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
|
|
unsigned int i;
|
|
u32 tmp32;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
/* enable ADMA on the ports */
|
|
pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
|
|
tmp32 |= NV_MCP_SATA_CFG_20_PORT0_EN |
|
|
NV_MCP_SATA_CFG_20_PORT0_PWB_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_PWB_EN;
|
|
|
|
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
|
|
|
|
for (i = 0; i < probe_ent->n_ports; i++)
|
|
nv_adma_setup_port(probe_ent, i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nv_adma_fill_aprd(struct ata_queued_cmd *qc,
|
|
struct scatterlist *sg,
|
|
int idx,
|
|
struct nv_adma_prd *aprd)
|
|
{
|
|
u8 flags = 0;
|
|
if (qc->tf.flags & ATA_TFLAG_WRITE)
|
|
flags |= NV_APRD_WRITE;
|
|
if (idx == qc->n_elem - 1)
|
|
flags |= NV_APRD_END;
|
|
else if (idx != 4)
|
|
flags |= NV_APRD_CONT;
|
|
|
|
aprd->addr = cpu_to_le64(((u64)sg_dma_address(sg)));
|
|
aprd->len = cpu_to_le32(((u32)sg_dma_len(sg))); /* len in bytes */
|
|
aprd->flags = flags;
|
|
aprd->packet_len = 0;
|
|
}
|
|
|
|
static void nv_adma_fill_sg(struct ata_queued_cmd *qc, struct nv_adma_cpb *cpb)
|
|
{
|
|
struct nv_adma_port_priv *pp = qc->ap->private_data;
|
|
unsigned int idx;
|
|
struct nv_adma_prd *aprd;
|
|
struct scatterlist *sg;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
idx = 0;
|
|
|
|
ata_for_each_sg(sg, qc) {
|
|
aprd = (idx < 5) ? &cpb->aprd[idx] : &pp->aprd[NV_ADMA_SGTBL_LEN * qc->tag + (idx-5)];
|
|
nv_adma_fill_aprd(qc, sg, idx, aprd);
|
|
idx++;
|
|
}
|
|
if (idx > 5)
|
|
cpb->next_aprd = cpu_to_le64(((u64)(pp->aprd_dma + NV_ADMA_SGTBL_SZ * qc->tag)));
|
|
else
|
|
cpb->next_aprd = cpu_to_le64(0);
|
|
}
|
|
|
|
static int nv_adma_use_reg_mode(struct ata_queued_cmd *qc)
|
|
{
|
|
struct nv_adma_port_priv *pp = qc->ap->private_data;
|
|
|
|
/* ADMA engine can only be used for non-ATAPI DMA commands,
|
|
or interrupt-driven no-data commands. */
|
|
if((pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) ||
|
|
(qc->tf.flags & ATA_TFLAG_POLLING))
|
|
return 1;
|
|
|
|
if((qc->flags & ATA_QCFLAG_DMAMAP) ||
|
|
(qc->tf.protocol == ATA_PROT_NODATA))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct nv_adma_port_priv *pp = qc->ap->private_data;
|
|
struct nv_adma_cpb *cpb = &pp->cpb[qc->tag];
|
|
u8 ctl_flags = NV_CPB_CTL_CPB_VALID |
|
|
NV_CPB_CTL_IEN;
|
|
|
|
if (nv_adma_use_reg_mode(qc)) {
|
|
nv_adma_register_mode(qc->ap);
|
|
ata_qc_prep(qc);
|
|
return;
|
|
}
|
|
|
|
cpb->resp_flags = NV_CPB_RESP_DONE;
|
|
wmb();
|
|
cpb->ctl_flags = 0;
|
|
wmb();
|
|
|
|
cpb->len = 3;
|
|
cpb->tag = qc->tag;
|
|
cpb->next_cpb_idx = 0;
|
|
|
|
/* turn on NCQ flags for NCQ commands */
|
|
if (qc->tf.protocol == ATA_PROT_NCQ)
|
|
ctl_flags |= NV_CPB_CTL_QUEUE | NV_CPB_CTL_FPDMA;
|
|
|
|
VPRINTK("qc->flags = 0x%lx\n", qc->flags);
|
|
|
|
nv_adma_tf_to_cpb(&qc->tf, cpb->tf);
|
|
|
|
if(qc->flags & ATA_QCFLAG_DMAMAP) {
|
|
nv_adma_fill_sg(qc, cpb);
|
|
ctl_flags |= NV_CPB_CTL_APRD_VALID;
|
|
} else
|
|
memset(&cpb->aprd[0], 0, sizeof(struct nv_adma_prd) * 5);
|
|
|
|
/* Be paranoid and don't let the device see NV_CPB_CTL_CPB_VALID until we are
|
|
finished filling in all of the contents */
|
|
wmb();
|
|
cpb->ctl_flags = ctl_flags;
|
|
wmb();
|
|
cpb->resp_flags = 0;
|
|
}
|
|
|
|
static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct nv_adma_port_priv *pp = qc->ap->private_data;
|
|
void __iomem *mmio = pp->ctl_block;
|
|
int curr_ncq = (qc->tf.protocol == ATA_PROT_NCQ);
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
if (nv_adma_use_reg_mode(qc)) {
|
|
/* use ATA register mode */
|
|
VPRINTK("using ATA register mode: 0x%lx\n", qc->flags);
|
|
nv_adma_register_mode(qc->ap);
|
|
return ata_qc_issue_prot(qc);
|
|
} else
|
|
nv_adma_mode(qc->ap);
|
|
|
|
/* write append register, command tag in lower 8 bits
|
|
and (number of cpbs to append -1) in top 8 bits */
|
|
wmb();
|
|
|
|
if(curr_ncq != pp->last_issue_ncq) {
|
|
/* Seems to need some delay before switching between NCQ and non-NCQ
|
|
commands, else we get command timeouts and such. */
|
|
udelay(20);
|
|
pp->last_issue_ncq = curr_ncq;
|
|
}
|
|
|
|
writew(qc->tag, mmio + NV_ADMA_APPEND);
|
|
|
|
DPRINTK("Issued tag %u\n",qc->tag);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
unsigned int i;
|
|
unsigned int handled = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap;
|
|
|
|
ap = host->ports[i];
|
|
if (ap &&
|
|
!(ap->flags & ATA_FLAG_DISABLED)) {
|
|
struct ata_queued_cmd *qc;
|
|
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
|
|
handled += ata_host_intr(ap, qc);
|
|
else
|
|
// No request pending? Clear interrupt status
|
|
// anyway, in case there's one pending.
|
|
ap->ops->check_status(ap);
|
|
}
|
|
|
|
}
|
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static irqreturn_t nv_do_interrupt(struct ata_host *host, u8 irq_stat)
|
|
{
|
|
int i, handled = 0;
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
if (ap && !(ap->flags & ATA_FLAG_DISABLED))
|
|
handled += nv_host_intr(ap, irq_stat);
|
|
|
|
irq_stat >>= NV_INT_PORT_SHIFT;
|
|
}
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static irqreturn_t nv_nf2_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
u8 irq_stat;
|
|
irqreturn_t ret;
|
|
|
|
spin_lock(&host->lock);
|
|
irq_stat = ioread8(host->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);
|
|
ret = nv_do_interrupt(host, irq_stat);
|
|
spin_unlock(&host->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
u8 irq_stat;
|
|
irqreturn_t ret;
|
|
|
|
spin_lock(&host->lock);
|
|
irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804);
|
|
ret = nv_do_interrupt(host, irq_stat);
|
|
spin_unlock(&host->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return 0xffffffffU;
|
|
|
|
return ioread32(ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
}
|
|
|
|
static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return;
|
|
|
|
iowrite32(val, ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
}
|
|
|
|
static void nv_nf2_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr;
|
|
int shift = ap->port_no * NV_INT_PORT_SHIFT;
|
|
u8 mask;
|
|
|
|
mask = ioread8(scr_addr + NV_INT_ENABLE);
|
|
mask &= ~(NV_INT_ALL << shift);
|
|
iowrite8(mask, scr_addr + NV_INT_ENABLE);
|
|
}
|
|
|
|
static void nv_nf2_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr;
|
|
int shift = ap->port_no * NV_INT_PORT_SHIFT;
|
|
u8 mask;
|
|
|
|
iowrite8(NV_INT_ALL << shift, scr_addr + NV_INT_STATUS);
|
|
|
|
mask = ioread8(scr_addr + NV_INT_ENABLE);
|
|
mask |= (NV_INT_MASK << shift);
|
|
iowrite8(mask, scr_addr + NV_INT_ENABLE);
|
|
}
|
|
|
|
static void nv_ck804_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
|
|
int shift = ap->port_no * NV_INT_PORT_SHIFT;
|
|
u8 mask;
|
|
|
|
mask = readb(mmio_base + NV_INT_ENABLE_CK804);
|
|
mask &= ~(NV_INT_ALL << shift);
|
|
writeb(mask, mmio_base + NV_INT_ENABLE_CK804);
|
|
}
|
|
|
|
static void nv_ck804_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
|
|
int shift = ap->port_no * NV_INT_PORT_SHIFT;
|
|
u8 mask;
|
|
|
|
writeb(NV_INT_ALL << shift, mmio_base + NV_INT_STATUS_CK804);
|
|
|
|
mask = readb(mmio_base + NV_INT_ENABLE_CK804);
|
|
mask |= (NV_INT_MASK << shift);
|
|
writeb(mask, mmio_base + NV_INT_ENABLE_CK804);
|
|
}
|
|
|
|
static int nv_hardreset(struct ata_port *ap, unsigned int *class)
|
|
{
|
|
unsigned int dummy;
|
|
|
|
/* SATA hardreset fails to retrieve proper device signature on
|
|
* some controllers. Don't classify on hardreset. For more
|
|
* info, see http://bugme.osdl.org/show_bug.cgi?id=3352
|
|
*/
|
|
return sata_std_hardreset(ap, &dummy);
|
|
}
|
|
|
|
static void nv_error_handler(struct ata_port *ap)
|
|
{
|
|
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
|
|
nv_hardreset, ata_std_postreset);
|
|
}
|
|
|
|
static void nv_adma_error_handler(struct ata_port *ap)
|
|
{
|
|
struct nv_adma_port_priv *pp = ap->private_data;
|
|
if(!(pp->flags & NV_ADMA_PORT_REGISTER_MODE)) {
|
|
void __iomem *mmio = pp->ctl_block;
|
|
int i;
|
|
u16 tmp;
|
|
|
|
if(ata_tag_valid(ap->active_tag) || ap->sactive) {
|
|
u32 notifier = readl(mmio + NV_ADMA_NOTIFIER);
|
|
u32 notifier_error = readl(mmio + NV_ADMA_NOTIFIER_ERROR);
|
|
u32 gen_ctl = readl(pp->gen_block + NV_ADMA_GEN_CTL);
|
|
u32 status = readw(mmio + NV_ADMA_STAT);
|
|
u8 cpb_count = readb(mmio + NV_ADMA_CPB_COUNT);
|
|
u8 next_cpb_idx = readb(mmio + NV_ADMA_NEXT_CPB_IDX);
|
|
|
|
ata_port_printk(ap, KERN_ERR, "EH in ADMA mode, notifier 0x%X "
|
|
"notifier_error 0x%X gen_ctl 0x%X status 0x%X "
|
|
"next cpb count 0x%X next cpb idx 0x%x\n",
|
|
notifier, notifier_error, gen_ctl, status,
|
|
cpb_count, next_cpb_idx);
|
|
|
|
for( i=0;i<NV_ADMA_MAX_CPBS;i++) {
|
|
struct nv_adma_cpb *cpb = &pp->cpb[i];
|
|
if( (ata_tag_valid(ap->active_tag) && i == ap->active_tag) ||
|
|
ap->sactive & (1 << i) )
|
|
ata_port_printk(ap, KERN_ERR,
|
|
"CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
|
|
i, cpb->ctl_flags, cpb->resp_flags);
|
|
}
|
|
}
|
|
|
|
/* Push us back into port register mode for error handling. */
|
|
nv_adma_register_mode(ap);
|
|
|
|
/* Mark all of the CPBs as invalid to prevent them from being executed */
|
|
for( i=0;i<NV_ADMA_MAX_CPBS;i++)
|
|
pp->cpb[i].ctl_flags &= ~NV_CPB_CTL_CPB_VALID;
|
|
|
|
/* clear CPB fetch count */
|
|
writew(0, mmio + NV_ADMA_CPB_COUNT);
|
|
|
|
/* Reset channel */
|
|
tmp = readw(mmio + NV_ADMA_CTL);
|
|
writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
|
|
readw( mmio + NV_ADMA_CTL ); /* flush posted write */
|
|
udelay(1);
|
|
writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
|
|
readw( mmio + NV_ADMA_CTL ); /* flush posted write */
|
|
}
|
|
|
|
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
|
|
nv_hardreset, ata_std_postreset);
|
|
}
|
|
|
|
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version = 0;
|
|
struct ata_port_info *ppi[2];
|
|
struct ata_probe_ent *probe_ent;
|
|
struct nv_host_priv *hpriv;
|
|
int rc;
|
|
u32 bar;
|
|
void __iomem *base;
|
|
unsigned long type = ent->driver_data;
|
|
int mask_set = 0;
|
|
|
|
// Make sure this is a SATA controller by counting the number of bars
|
|
// (NVIDIA SATA controllers will always have six bars). Otherwise,
|
|
// it's an IDE controller and we ignore it.
|
|
for (bar=0; bar<6; bar++)
|
|
if (pci_resource_start(pdev, bar) == 0)
|
|
return -ENODEV;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pci_request_regions(pdev, DRV_NAME);
|
|
if (rc) {
|
|
pcim_pin_device(pdev);
|
|
return rc;
|
|
}
|
|
|
|
if(type >= CK804 && adma_enabled) {
|
|
dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
|
|
type = ADMA;
|
|
if(!pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
|
|
!pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
|
|
mask_set = 1;
|
|
}
|
|
|
|
if(!mask_set) {
|
|
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
rc = -ENOMEM;
|
|
|
|
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
|
|
if (!hpriv)
|
|
return -ENOMEM;
|
|
|
|
ppi[0] = ppi[1] = &nv_port_info[type];
|
|
probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
|
|
if (!probe_ent)
|
|
return -ENOMEM;
|
|
|
|
if (!pcim_iomap(pdev, NV_MMIO_BAR, 0))
|
|
return -EIO;
|
|
probe_ent->iomap = pcim_iomap_table(pdev);
|
|
|
|
probe_ent->private_data = hpriv;
|
|
hpriv->type = type;
|
|
|
|
base = probe_ent->iomap[NV_MMIO_BAR];
|
|
probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET;
|
|
probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET;
|
|
|
|
/* enable SATA space for CK804 */
|
|
if (type >= CK804) {
|
|
u8 regval;
|
|
|
|
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
|
|
regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
|
|
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
if (type == ADMA) {
|
|
rc = nv_adma_host_init(probe_ent);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
rc = ata_device_add(probe_ent);
|
|
if (rc != NV_PORTS)
|
|
return -ENODEV;
|
|
|
|
devm_kfree(&pdev->dev, probe_ent);
|
|
return 0;
|
|
}
|
|
|
|
static void nv_remove_one (struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
struct nv_host_priv *hpriv = host->private_data;
|
|
|
|
ata_pci_remove_one(pdev);
|
|
kfree(hpriv);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int nv_pci_device_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
struct nv_host_priv *hpriv = host->private_data;
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if(rc)
|
|
return rc;
|
|
|
|
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
|
|
if(hpriv->type >= CK804) {
|
|
u8 regval;
|
|
|
|
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
|
|
regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
|
|
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
|
|
}
|
|
if(hpriv->type == ADMA) {
|
|
u32 tmp32;
|
|
struct nv_adma_port_priv *pp;
|
|
/* enable/disable ADMA on the ports appropriately */
|
|
pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
|
|
|
|
pp = host->ports[0]->private_data;
|
|
if(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
|
|
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
|
|
NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
|
|
else
|
|
tmp32 |= (NV_MCP_SATA_CFG_20_PORT0_EN |
|
|
NV_MCP_SATA_CFG_20_PORT0_PWB_EN);
|
|
pp = host->ports[1]->private_data;
|
|
if(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)
|
|
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT1_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
|
|
else
|
|
tmp32 |= (NV_MCP_SATA_CFG_20_PORT1_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
|
|
|
|
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
|
|
}
|
|
}
|
|
|
|
ata_host_resume(host);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void nv_ck804_host_stop(struct ata_host *host)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
u8 regval;
|
|
|
|
/* disable SATA space for CK804 */
|
|
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
|
|
regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
|
|
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
|
|
}
|
|
|
|
static void nv_adma_host_stop(struct ata_host *host)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
u32 tmp32;
|
|
|
|
/* disable ADMA on the ports */
|
|
pci_read_config_dword(pdev, NV_MCP_SATA_CFG_20, &tmp32);
|
|
tmp32 &= ~(NV_MCP_SATA_CFG_20_PORT0_EN |
|
|
NV_MCP_SATA_CFG_20_PORT0_PWB_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_EN |
|
|
NV_MCP_SATA_CFG_20_PORT1_PWB_EN);
|
|
|
|
pci_write_config_dword(pdev, NV_MCP_SATA_CFG_20, tmp32);
|
|
|
|
nv_ck804_host_stop(host);
|
|
}
|
|
|
|
static int __init nv_init(void)
|
|
{
|
|
return pci_register_driver(&nv_pci_driver);
|
|
}
|
|
|
|
static void __exit nv_exit(void)
|
|
{
|
|
pci_unregister_driver(&nv_pci_driver);
|
|
}
|
|
|
|
module_init(nv_init);
|
|
module_exit(nv_exit);
|
|
module_param_named(adma, adma_enabled, bool, 0444);
|
|
MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
|