Philip Rakity bd6a8c30fa mmc: sdhci: Allow caps[1] to be set via SDHCI_QUIRK_MISSING_CAPS
Currently only the capability_0 register can be set if
SDHCI_QUIRK_MISSING_CAPS is defined.  This is a problem when
the capability_1 register also needs changing.  Use the quirk
SDHCI_QUIRK_MISSING_CAPS to allow both registers to be set.

Redefining caps[1] is useful when the board design does not
support 1.8v vccq so UHS modes are not available.  The code that
calls sdhci_add_host can then detect this condition and adjust
the caps so the UHS mode will not be attempted on UHS cards.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-22 15:25:44 -04:00
..
2012-05-26 12:22:27 -07:00
2012-06-20 14:39:36 -07:00
2012-05-24 16:22:53 -04:00
2012-05-26 12:42:29 -07:00
2012-05-23 14:07:06 -07:00
2012-05-22 16:02:13 -07:00
2012-07-04 15:55:19 +08:00
2012-06-20 14:39:36 -07:00
2012-07-06 10:34:48 -07:00
2012-06-14 20:29:40 -05:00
2012-05-22 16:02:13 -07:00
2012-06-20 15:13:13 -07:00
2012-06-26 16:14:34 -07:00
2012-06-16 16:59:05 -07:00
2012-05-26 12:42:29 -07:00
2012-06-15 17:17:15 -07:00
2012-05-22 16:34:21 -07:00
2012-05-26 12:22:27 -07:00