FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-22 09:22:37 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
c00c72ae01
linux/drivers/scsi/sata_nv.c
Jeff Garzik aa8f0dc6c3 libata: Fix use-after-iounmap 
Jens Axboe pointed out that the iounmap() call in libata was occurring
too early, and some drivers (ahci, probably others) were using ioremap'd
memory after it had been unmapped.

The patch should address that problem by way of improving the libata
driver API:

* move ->host_stop() call after all ->port_stop() calls have occurred.

* create default helper function ata_host_stop(), and move iounmap()
call there.

* add ->host_stop_prewalk() hook, use it in sata_qstor.c (hi Mark).
sata_qstor appears to require the host-stop-before-port-stop ordering
that existed prior to applying the attached patch.
2005-05-26 21:54:27 -04:00

573 lines
16 KiB
C
Raw Blame History

/*
* sata_nv.c - NVIDIA nForce SATA
*
* Copyright 2004 NVIDIA Corp. All rights reserved.
* Copyright 2004 Andrew Chew
*
* The contents of this file are subject to the Open
* Software License version 1.1 that can be found at
* http://www.opensource.org/licenses/osl-1.1.txt and is included herein
* by reference.
*
* Alternatively, the contents of this file may be used under the terms
* of the GNU General Public License version 2 (the "GPL") as distributed
* in the kernel source COPYING file, in which case the provisions of
* the GPL are applicable instead of the above. If you wish to allow
* the use of your version of this file only under the terms of the
* GPL and not to allow others to use your version of this file under
* the OSL, indicate your decision by deleting the provisions above and
* replace them with the notice and other provisions required by the GPL.
* If you do not delete the provisions above, a recipient may use your
* version of this file under either the OSL or the GPL.
*
* 0.06
* - Added generic SATA support by using a pci_device_id that filters on
* the IDE storage class code.
*
* 0.03
* - Fixed a bug where the hotplug handlers for non-CK804/MCP04 were using
* mmio_base, which is only set for the CK804/MCP04 case.
*
* 0.02
* - Added support for CK804 SATA controller.
*
* 0.01
* - Initial revision.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
#define DRV_VERSION "0.6"
#define NV_PORTS 2
#define NV_PIO_MASK 0x1f
#define NV_MWDMA_MASK 0x07
#define NV_UDMA_MASK 0x7f
#define NV_PORT0_SCR_REG_OFFSET 0x00
#define NV_PORT1_SCR_REG_OFFSET 0x40
#define NV_INT_STATUS 0x10
#define NV_INT_STATUS_CK804 0x440
#define NV_INT_STATUS_PDEV_INT 0x01
#define NV_INT_STATUS_PDEV_PM 0x02
#define NV_INT_STATUS_PDEV_ADDED 0x04
#define NV_INT_STATUS_PDEV_REMOVED 0x08
#define NV_INT_STATUS_SDEV_INT 0x10
#define NV_INT_STATUS_SDEV_PM 0x20
#define NV_INT_STATUS_SDEV_ADDED 0x40
#define NV_INT_STATUS_SDEV_REMOVED 0x80
#define NV_INT_STATUS_PDEV_HOTPLUG (NV_INT_STATUS_PDEV_ADDED | \
NV_INT_STATUS_PDEV_REMOVED)
#define NV_INT_STATUS_SDEV_HOTPLUG (NV_INT_STATUS_SDEV_ADDED | \
NV_INT_STATUS_SDEV_REMOVED)
#define NV_INT_STATUS_HOTPLUG (NV_INT_STATUS_PDEV_HOTPLUG | \
NV_INT_STATUS_SDEV_HOTPLUG)
#define NV_INT_ENABLE 0x11
#define NV_INT_ENABLE_CK804 0x441
#define NV_INT_ENABLE_PDEV_MASK 0x01
#define NV_INT_ENABLE_PDEV_PM 0x02
#define NV_INT_ENABLE_PDEV_ADDED 0x04
#define NV_INT_ENABLE_PDEV_REMOVED 0x08
#define NV_INT_ENABLE_SDEV_MASK 0x10
#define NV_INT_ENABLE_SDEV_PM 0x20
#define NV_INT_ENABLE_SDEV_ADDED 0x40
#define NV_INT_ENABLE_SDEV_REMOVED 0x80
#define NV_INT_ENABLE_PDEV_HOTPLUG (NV_INT_ENABLE_PDEV_ADDED | \
NV_INT_ENABLE_PDEV_REMOVED)
#define NV_INT_ENABLE_SDEV_HOTPLUG (NV_INT_ENABLE_SDEV_ADDED | \
NV_INT_ENABLE_SDEV_REMOVED)
#define NV_INT_ENABLE_HOTPLUG (NV_INT_ENABLE_PDEV_HOTPLUG | \
NV_INT_ENABLE_SDEV_HOTPLUG)
#define NV_INT_CONFIG 0x12
#define NV_INT_CONFIG_METHD 0x01 // 0 = INT, 1 = SMI
// For PCI config register 20
#define NV_MCP_SATA_CFG_20 0x50
#define NV_MCP_SATA_CFG_20_SATA_SPACE_EN 0x04
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
static irqreturn_t nv_interrupt (int irq, void *dev_instance,
struct pt_regs *regs);
static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static void nv_host_stop (struct ata_host_set *host_set);
static void nv_enable_hotplug(struct ata_probe_ent *probe_ent);
static void nv_disable_hotplug(struct ata_host_set *host_set);
static void nv_check_hotplug(struct ata_host_set *host_set);
static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent);
static void nv_disable_hotplug_ck804(struct ata_host_set *host_set);
static void nv_check_hotplug_ck804(struct ata_host_set *host_set);
enum nv_host_type
{
GENERIC,
NFORCE2,
NFORCE3,
CK804
};
static struct pci_device_id nv_pci_tbl[] = {
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE2 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
{ 0, } /* terminate list */
};
#define NV_HOST_FLAGS_SCR_MMIO 0x00000001
struct nv_host_desc
{
enum nv_host_type host_type;
void (*enable_hotplug)(struct ata_probe_ent *probe_ent);
void (*disable_hotplug)(struct ata_host_set *host_set);
void (*check_hotplug)(struct ata_host_set *host_set);
};
static struct nv_host_desc nv_device_tbl[] = {
{
.host_type = GENERIC,
.enable_hotplug = NULL,
.disable_hotplug= NULL,
.check_hotplug = NULL,
},
{
.host_type = NFORCE2,
.enable_hotplug = nv_enable_hotplug,
.disable_hotplug= nv_disable_hotplug,
.check_hotplug = nv_check_hotplug,
},
{
.host_type = NFORCE3,
.enable_hotplug = nv_enable_hotplug,
.disable_hotplug= nv_disable_hotplug,
.check_hotplug = nv_check_hotplug,
},
{ .host_type = CK804,
.enable_hotplug = nv_enable_hotplug_ck804,
.disable_hotplug= nv_disable_hotplug_ck804,
.check_hotplug = nv_check_hotplug_ck804,
},
};
struct nv_host
{
struct nv_host_desc *host_desc;
unsigned long host_flags;
};
static struct pci_driver nv_pci_driver = {
.name = DRV_NAME,
.id_table = nv_pci_tbl,
.probe = nv_init_one,
.remove = ata_pci_remove_one,
};
static Scsi_Host_Template nv_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
};
static struct ata_port_operations nv_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.phy_reset = sata_phy_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.eng_timeout = ata_eng_timeout,
.irq_handler = nv_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
.port_start = ata_port_start,
.port_stop = ata_port_stop,
.host_stop = nv_host_stop,
};
/* FIXME: The hardware provides the necessary SATA PHY controls
* to support ATA_FLAG_SATA_RESET. However, it is currently
* necessary to disable that flag, to solve misdetection problems.
* See http://bugme.osdl.org/show_bug.cgi?id=3352 for more info.
*
* This problem really needs to be investigated further. But in the
* meantime, we avoid ATA_FLAG_SATA_RESET to get people working.
*/
static struct ata_port_info nv_port_info = {
.sht = &nv_sht,
.host_flags = ATA_FLAG_SATA |
/* ATA_FLAG_SATA_RESET | */
ATA_FLAG_SRST |
ATA_FLAG_NO_LEGACY,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_ops,
};
MODULE_AUTHOR("NVIDIA");
MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
static irqreturn_t nv_interrupt (int irq, void *dev_instance,
struct pt_regs *regs)
{
struct ata_host_set *host_set = dev_instance;
struct nv_host *host = host_set->private_data;
unsigned int i;
unsigned int handled = 0;
unsigned long flags;
spin_lock_irqsave(&host_set->lock, flags);
for (i = 0; i < host_set->n_ports; i++) {
struct ata_port *ap;
ap = host_set->ports[i];
if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc && (!(qc->tf.ctl & ATA_NIEN)))
handled += ata_host_intr(ap, qc);
}
}
if (host->host_desc->check_hotplug)
host->host_desc->check_hotplug(host_set);
spin_unlock_irqrestore(&host_set->lock, flags);
return IRQ_RETVAL(handled);
}
static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
struct ata_host_set *host_set = ap->host_set;
struct nv_host *host = host_set->private_data;
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4));
else
return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
{
struct ata_host_set *host_set = ap->host_set;
struct nv_host *host = host_set->private_data;
if (sc_reg > SCR_CONTROL)
return;
if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4));
else
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void nv_host_stop (struct ata_host_set *host_set)
{
struct nv_host *host = host_set->private_data;
// Disable hotplug event interrupts.
if (host->host_desc->disable_hotplug)
host->host_desc->disable_hotplug(host_set);
kfree(host);
ata_host_stop(host_set);
}
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
struct nv_host *host;
struct ata_port_info *ppi;
struct ata_probe_ent *probe_ent;
int pci_dev_busy = 0;
int rc;
u32 bar;
// Make sure this is a SATA controller by counting the number of bars
// (NVIDIA SATA controllers will always have six bars). Otherwise,
// it's an IDE controller and we ignore it.
for (bar=0; bar<6; bar++)
if (pci_resource_start(pdev, bar) == 0)
return -ENODEV;
if (!printed_version++)
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
goto err_out;
rc = pci_request_regions(pdev, DRV_NAME);
if (rc) {
pci_dev_busy = 1;
goto err_out_disable;
}
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
goto err_out_regions;
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
goto err_out_regions;
rc = -ENOMEM;
ppi = &nv_port_info;
probe_ent = ata_pci_init_native_mode(pdev, &ppi);
if (!probe_ent)
goto err_out_regions;
host = kmalloc(sizeof(struct nv_host), GFP_KERNEL);
if (!host)
goto err_out_free_ent;
memset(host, 0, sizeof(struct nv_host));
host->host_desc = &nv_device_tbl[ent->driver_data];
probe_ent->private_data = host;
if (pci_resource_flags(pdev, 5) & IORESOURCE_MEM)
host->host_flags |= NV_HOST_FLAGS_SCR_MMIO;
if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) {
unsigned long base;
probe_ent->mmio_base = ioremap(pci_resource_start(pdev, 5),
pci_resource_len(pdev, 5));
if (probe_ent->mmio_base == NULL) {
rc = -EIO;
goto err_out_free_host;
}
base = (unsigned long)probe_ent->mmio_base;
probe_ent->port[0].scr_addr =
base + NV_PORT0_SCR_REG_OFFSET;
probe_ent->port[1].scr_addr =
base + NV_PORT1_SCR_REG_OFFSET;
} else {
probe_ent->port[0].scr_addr =
pci_resource_start(pdev, 5) | NV_PORT0_SCR_REG_OFFSET;
probe_ent->port[1].scr_addr =
pci_resource_start(pdev, 5) | NV_PORT1_SCR_REG_OFFSET;
}
pci_set_master(pdev);
rc = ata_device_add(probe_ent);
if (rc != NV_PORTS)
goto err_out_iounmap;
// Enable hotplug event interrupts.
if (host->host_desc->enable_hotplug)
host->host_desc->enable_hotplug(probe_ent);
kfree(probe_ent);
return 0;
err_out_iounmap:
if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
iounmap(probe_ent->mmio_base);
err_out_free_host:
kfree(host);
err_out_free_ent:
kfree(probe_ent);
err_out_regions:
pci_release_regions(pdev);
err_out_disable:
if (!pci_dev_busy)
pci_disable_device(pdev);
err_out:
return rc;
}
static void nv_enable_hotplug(struct ata_probe_ent *probe_ent)
{
u8 intr_mask;
outb(NV_INT_STATUS_HOTPLUG,
probe_ent->port[0].scr_addr + NV_INT_STATUS);
intr_mask = inb(probe_ent->port[0].scr_addr + NV_INT_ENABLE);
intr_mask |= NV_INT_ENABLE_HOTPLUG;
outb(intr_mask, probe_ent->port[0].scr_addr + NV_INT_ENABLE);
}
static void nv_disable_hotplug(struct ata_host_set *host_set)
{
u8 intr_mask;
intr_mask = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);
intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);
outb(intr_mask, host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);
}
static void nv_check_hotplug(struct ata_host_set *host_set)
{
u8 intr_status;
intr_status = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);
// Clear interrupt status.
outb(0xff, host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);
if (intr_status & NV_INT_STATUS_HOTPLUG) {
if (intr_status & NV_INT_STATUS_PDEV_ADDED)
printk(KERN_WARNING "nv_sata: "
"Primary device added\n");
if (intr_status & NV_INT_STATUS_PDEV_REMOVED)
printk(KERN_WARNING "nv_sata: "
"Primary device removed\n");
if (intr_status & NV_INT_STATUS_SDEV_ADDED)
printk(KERN_WARNING "nv_sata: "
"Secondary device added\n");
if (intr_status & NV_INT_STATUS_SDEV_REMOVED)
printk(KERN_WARNING "nv_sata: "
"Secondary device removed\n");
}
}
static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent)
{
struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
u8 intr_mask;
u8 regval;
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, &regval);
regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
writeb(NV_INT_STATUS_HOTPLUG, probe_ent->mmio_base + NV_INT_STATUS_CK804);
intr_mask = readb(probe_ent->mmio_base + NV_INT_ENABLE_CK804);
intr_mask |= NV_INT_ENABLE_HOTPLUG;
writeb(intr_mask, probe_ent->mmio_base + NV_INT_ENABLE_CK804);
}
static void nv_disable_hotplug_ck804(struct ata_host_set *host_set)
{
struct pci_dev *pdev = to_pci_dev(host_set->dev);
u8 intr_mask;
u8 regval;
intr_mask = readb(host_set->mmio_base + NV_INT_ENABLE_CK804);
intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);
writeb(intr_mask, host_set->mmio_base + NV_INT_ENABLE_CK804);
pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, &regval);
regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
}
static void nv_check_hotplug_ck804(struct ata_host_set *host_set)
{
u8 intr_status;
intr_status = readb(host_set->mmio_base + NV_INT_STATUS_CK804);
// Clear interrupt status.
writeb(0xff, host_set->mmio_base + NV_INT_STATUS_CK804);
if (intr_status & NV_INT_STATUS_HOTPLUG) {
if (intr_status & NV_INT_STATUS_PDEV_ADDED)
printk(KERN_WARNING "nv_sata: "
"Primary device added\n");
if (intr_status & NV_INT_STATUS_PDEV_REMOVED)
printk(KERN_WARNING "nv_sata: "
"Primary device removed\n");
if (intr_status & NV_INT_STATUS_SDEV_ADDED)
printk(KERN_WARNING "nv_sata: "
"Secondary device added\n");
if (intr_status & NV_INT_STATUS_SDEV_REMOVED)
printk(KERN_WARNING "nv_sata: "
"Secondary device removed\n");
}
}
static int __init nv_init(void)
{
return pci_module_init(&nv_pci_driver);
}
static void __exit nv_exit(void)
{
pci_unregister_driver(&nv_pci_driver);
}
module_init(nv_init);
module_exit(nv_exit);
Reference in New Issue View Git Blame Copy Permalink