Adriana Reus c3304c2123 iio: light: us5182d: Add property for choosing default power mode
This chip supports two power modes.
1. "one-shot" mode - the chip activates and executes one complete
conversion loop and then shuts itself down. This is the default mode
chosen for raw reads.
2. "continuous" mode - the chip takes continuous measurements.

Continuous mode is more expensive power-wise but may be more reliable.
Add a property so that if preferred, the default power mode for raw
reads can be set to continuous.
Separate one-shot enabling in a separate function that will be used
depending on the chosen power mode. Also create a function for
powering the chip on and off.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-02 18:42:03 +00:00
..
2015-11-13 20:35:54 -08:00
2015-11-20 01:22:33 +01:00
2015-11-10 15:00:03 -08:00
2015-11-12 15:26:39 -08:00
2015-11-06 14:22:15 -08:00
2015-11-11 10:21:34 -08:00
2015-11-10 15:00:03 -08:00
2015-11-06 14:22:15 -08:00
2015-11-13 20:35:54 -08:00
2015-11-05 13:15:12 -08:00
2015-10-29 09:02:16 +09:00
2015-11-10 15:00:03 -08:00
2015-11-12 07:06:18 -05:00
2015-11-06 14:22:15 -08:00
2015-11-08 16:24:43 -05:00
2015-11-10 16:32:11 -08:00
2015-11-04 14:47:13 -08:00
2015-11-13 21:53:18 -08:00
2015-11-06 10:23:50 -08:00
2015-11-11 09:16:10 -08:00
2015-11-05 13:15:12 -08:00
2015-11-10 10:01:21 -08:00
2015-11-13 20:35:54 -08:00
2015-11-10 15:00:03 -08:00
2015-11-04 22:15:15 -08:00
2015-11-13 20:35:54 -08:00
2015-11-20 16:19:54 -08:00
2015-11-04 21:50:37 -08:00
2015-11-13 17:05:32 -08:00
2015-11-10 10:00:09 -08:00
2015-11-04 22:15:15 -08:00
2015-11-04 22:15:15 -08:00
2015-11-04 22:15:15 -08:00