linux/drivers/media/dvb/frontends/lnbp21.c
Abylay Ospan ceb59cf068 V4L/DVB (13936): 22-kHz set_tone fix for NetUP Dual DVB-S2-CI card
22-kHz tone can be driven in two ways:
1. LNBH24 can produce 22kHz continuous tone when TEN=1 ( 22 KHz tone output is
always activated ).
2. LNBH24 can reproduce 22kHz tone timings from DSQIN or EXTM pin's when TEN=0.
From LNBH24 datasheet:
"In order to improve design flexibility an external tone input pin is
available (EXTM). The EXTM is a Logic input pin which activates the 22 kHz
tone output, on the VoTX pin, by using the LNBH24 integrated tone generator
(similar to the DSQIN pin function). In fact, the output tone waveform
characteristics will always be internally controlled by the LNBH24 tone
generator and the EXTM signal will be used as a timing control for DiSEqC tone
data encoding on the VoTX output."

In NetUP Dual DVB-S2-CI card 22kHz tone timings on EXTM pin produced by
STV0900 demod:
.set_tone  = stv0900_set_tone

redefine to "set_tone = lnbp21_set_tone" is not correct for "NetUP Dual
DVB-S2-CI card".

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26 15:10:35 -03:00

189 lines
5.0 KiB
C

/*
* lnbp21.c - driver for lnb supply and control ic lnbp21
*
* Copyright (C) 2006, 2009 Oliver Endriss <o.endriss@gmx.de>
* Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
* Or, point your browser to http://www.gnu.org/copyleft/gpl.html
*
*
* the project's page is at http://www.linuxtv.org
*/
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/slab.h>
#include "dvb_frontend.h"
#include "lnbp21.h"
#include "lnbh24.h"
struct lnbp21 {
u8 config;
u8 override_or;
u8 override_and;
struct i2c_adapter *i2c;
u8 i2c_addr;
};
static int lnbp21_set_voltage(struct dvb_frontend *fe,
fe_sec_voltage_t voltage)
{
struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->sec_priv;
struct i2c_msg msg = { .addr = lnbp21->i2c_addr, .flags = 0,
.buf = &lnbp21->config,
.len = sizeof(lnbp21->config) };
lnbp21->config &= ~(LNBP21_VSEL | LNBP21_EN);
switch(voltage) {
case SEC_VOLTAGE_OFF:
break;
case SEC_VOLTAGE_13:
lnbp21->config |= LNBP21_EN;
break;
case SEC_VOLTAGE_18:
lnbp21->config |= (LNBP21_EN | LNBP21_VSEL);
break;
default:
return -EINVAL;
};
lnbp21->config |= lnbp21->override_or;
lnbp21->config &= lnbp21->override_and;
return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO;
}
static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
{
struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->sec_priv;
struct i2c_msg msg = { .addr = lnbp21->i2c_addr, .flags = 0,
.buf = &lnbp21->config,
.len = sizeof(lnbp21->config) };
if (arg)
lnbp21->config |= LNBP21_LLC;
else
lnbp21->config &= ~LNBP21_LLC;
lnbp21->config |= lnbp21->override_or;
lnbp21->config &= lnbp21->override_and;
return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO;
}
static int lnbp21_set_tone(struct dvb_frontend *fe,
fe_sec_tone_mode_t tone)
{
struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->sec_priv;
struct i2c_msg msg = { .addr = lnbp21->i2c_addr, .flags = 0,
.buf = &lnbp21->config,
.len = sizeof(lnbp21->config) };
switch (tone) {
case SEC_TONE_OFF:
lnbp21->config &= ~LNBP21_TEN;
break;
case SEC_TONE_ON:
lnbp21->config |= LNBP21_TEN;
break;
default:
return -EINVAL;
};
lnbp21->config |= lnbp21->override_or;
lnbp21->config &= lnbp21->override_and;
return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO;
}
static void lnbp21_release(struct dvb_frontend *fe)
{
/* LNBP power off */
lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF);
/* free data */
kfree(fe->sec_priv);
fe->sec_priv = NULL;
}
static struct dvb_frontend *lnbx2x_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c, u8 override_set,
u8 override_clear, u8 i2c_addr, u8 config)
{
struct lnbp21 *lnbp21 = kmalloc(sizeof(struct lnbp21), GFP_KERNEL);
if (!lnbp21)
return NULL;
/* default configuration */
lnbp21->config = config;
lnbp21->i2c = i2c;
lnbp21->i2c_addr = i2c_addr;
fe->sec_priv = lnbp21;
/* bits which should be forced to '1' */
lnbp21->override_or = override_set;
/* bits which should be forced to '0' */
lnbp21->override_and = ~override_clear;
/* detect if it is present or not */
if (lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF)) {
kfree(lnbp21);
return NULL;
}
/* install release callback */
fe->ops.release_sec = lnbp21_release;
/* override frontend ops */
fe->ops.set_voltage = lnbp21_set_voltage;
fe->ops.enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
if (!fe->ops.set_tone) /* don't redefine */
fe->ops.set_tone = lnbp21_set_tone;
printk(KERN_INFO "LNBx2x attached on addr=%x\n", lnbp21->i2c_addr);
return fe;
}
struct dvb_frontend *lnbh24_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c, u8 override_set,
u8 override_clear, u8 i2c_addr)
{
return lnbx2x_attach(fe, i2c, override_set, override_clear,
i2c_addr, LNBH24_TTX);
}
EXPORT_SYMBOL(lnbh24_attach);
struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c, u8 override_set,
u8 override_clear)
{
return lnbx2x_attach(fe, i2c, override_set, override_clear,
0x08, LNBP21_ISEL);
}
EXPORT_SYMBOL(lnbp21_attach);
MODULE_DESCRIPTION("Driver for lnb supply and control ic lnbp21, lnbh24");
MODULE_AUTHOR("Oliver Endriss, Igor M. Liplianin");
MODULE_LICENSE("GPL");