Jean-Francois Dagenais d5528773e6 drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode ... Power-up timing The DS2408 is sensitive to the power-on slew rate and can inadvertently power up with a test mode feature enabled. When this occurs, the P0 port does not respond to the Channel Access Write command. For most reliable operation, it is recommended to disable the test mode after every power-on reset using the Disable Test Mode sequence shown below. The 64-bit ROM code must be transmitted in the same bit sequence as with the Match ROM command, i.e., least significant bit first. This precaution is recommended in parasite power mode (VCC pin connected to GND) as well as with VCC power. Disable Test Mode: RST,PD,96h,<64-bit DS2408 ROM Code>,3Ch,RST,PD [akpm@linux-foundation.org: don't use kerenldoc token to introduce a non-kerneldoc comment, tweak whitespace] Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>		2013-07-03 16:08:06 -07:00
..
masters	Merge 3.10-rc3 into char-misc-next	2013-05-27 10:40:19 +09:00
slaves	drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode	2013-07-03 16:08:06 -07:00
Kconfig
Makefile
w1_family.c
w1_family.h	w1: add support for DS2413 Dual Channel Addressable Switch	2013-02-27 19:10:23 -08:00
w1_int.c
w1_int.h
w1_io.c
w1_log.h
w1_netlink.c
w1_netlink.h
w1.c	w1: add family based automatic module loading	2013-06-03 14:09:14 -07:00
w1.h