mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-17 22:41:25 +00:00
c7087652e1
When BMDMA initialization failed or BMDMA was not available for whatever reason, bmdma_addr was left at zero and used as an indication that BMDMA shouldn't be used. This leads to the following problems. p1. For BMDMA drivers which don't use traditional BMDMA register, ata_bmdma_mode_filter() incorrectly inhibits DMA modes. Those drivers either have to inherit from ata_sff_port_ops or clear ->mode_filter explicitly. p2. non-BMDMA drivers call into BMDMA PRD table allocation. It doesn't actually allocate PRD table if bmdma_addr is not initialized but is still confusing. p3. For BMDMA drivers which don't use traditional BMDMA register, some methods might not be invoked as expected (e.g. bmdma_stop from ata_sff_post_internal_cmd()). p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops worrying libata core might call into one of them. These problems are caused by the muddy line between SFF and BMDMA and the assumption that all BMDMA controllers initialize bmdma_addr. This patch fixes p1 and p2 by removing the bmdma_addr assumption and moving prd allocation to BMDMA port start. Later patches will fix the remaining issues. This patch improves BMDMA initialization such that * When BMDMA register initialization fails, falls back to PIO instead of failing. ata_pci_bmdma_init() never fails now. * When ata_pci_bmdma_init() falls back to PIO, it clears ap->mwdma_mask and udma_mask instead of depending on ata_bmdma_mode_filter(). This makes ata_bmdma_mode_filter() unnecessary thus resolving p1. * ata_port_start() which actually is BMDMA specific is moved to ata_bmdma_port_start(). ata_port_start() and ata_sff_port_start() are killed. * ata_sff_port_start32() is moved and renamed to ata_bmdma_port_start32(). Drivers which no longer call into PRD table allocation are... pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all drivers which inherit from ata_sff_port_ops. pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD but is a BMDMA controller and doesn't have custom port_start like other such controllers. Note that with the previous patch which makes all and only BMDMA drivers inherit from ata_bmdma_port_ops, this change doesn't break drivers which need PRD table. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
689 lines
17 KiB
C
689 lines
17 KiB
C
/*
|
|
* pdc_adma.c - Pacific Digital Corporation ADMA
|
|
*
|
|
* Maintained by: Mark Lord <mlord@pobox.com>
|
|
*
|
|
* Copyright 2005 Mark Lord
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
*
|
|
* Supports ATA disks in single-packet ADMA mode.
|
|
* Uses PIO for everything else.
|
|
*
|
|
* TODO: Use ADMA transfers for ATAPI devices, when possible.
|
|
* This requires careful attention to a number of quirks of the chip.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pdc_adma"
|
|
#define DRV_VERSION "1.0"
|
|
|
|
/* macro to calculate base address for ATA regs */
|
|
#define ADMA_ATA_REGS(base, port_no) ((base) + ((port_no) * 0x40))
|
|
|
|
/* macro to calculate base address for ADMA regs */
|
|
#define ADMA_REGS(base, port_no) ((base) + 0x80 + ((port_no) * 0x20))
|
|
|
|
/* macro to obtain addresses from ata_port */
|
|
#define ADMA_PORT_REGS(ap) \
|
|
ADMA_REGS((ap)->host->iomap[ADMA_MMIO_BAR], ap->port_no)
|
|
|
|
enum {
|
|
ADMA_MMIO_BAR = 4,
|
|
|
|
ADMA_PORTS = 2,
|
|
ADMA_CPB_BYTES = 40,
|
|
ADMA_PRD_BYTES = LIBATA_MAX_PRD * 16,
|
|
ADMA_PKT_BYTES = ADMA_CPB_BYTES + ADMA_PRD_BYTES,
|
|
|
|
ADMA_DMA_BOUNDARY = 0xffffffff,
|
|
|
|
/* global register offsets */
|
|
ADMA_MODE_LOCK = 0x00c7,
|
|
|
|
/* per-channel register offsets */
|
|
ADMA_CONTROL = 0x0000, /* ADMA control */
|
|
ADMA_STATUS = 0x0002, /* ADMA status */
|
|
ADMA_CPB_COUNT = 0x0004, /* CPB count */
|
|
ADMA_CPB_CURRENT = 0x000c, /* current CPB address */
|
|
ADMA_CPB_NEXT = 0x000c, /* next CPB address */
|
|
ADMA_CPB_LOOKUP = 0x0010, /* CPB lookup table */
|
|
ADMA_FIFO_IN = 0x0014, /* input FIFO threshold */
|
|
ADMA_FIFO_OUT = 0x0016, /* output FIFO threshold */
|
|
|
|
/* ADMA_CONTROL register bits */
|
|
aNIEN = (1 << 8), /* irq mask: 1==masked */
|
|
aGO = (1 << 7), /* packet trigger ("Go!") */
|
|
aRSTADM = (1 << 5), /* ADMA logic reset */
|
|
aPIOMD4 = 0x0003, /* PIO mode 4 */
|
|
|
|
/* ADMA_STATUS register bits */
|
|
aPSD = (1 << 6),
|
|
aUIRQ = (1 << 4),
|
|
aPERR = (1 << 0),
|
|
|
|
/* CPB bits */
|
|
cDONE = (1 << 0),
|
|
cATERR = (1 << 3),
|
|
|
|
cVLD = (1 << 0),
|
|
cDAT = (1 << 2),
|
|
cIEN = (1 << 3),
|
|
|
|
/* PRD bits */
|
|
pORD = (1 << 4),
|
|
pDIRO = (1 << 5),
|
|
pEND = (1 << 7),
|
|
|
|
/* ATA register flags */
|
|
rIGN = (1 << 5),
|
|
rEND = (1 << 7),
|
|
|
|
/* ATA register addresses */
|
|
ADMA_REGS_CONTROL = 0x0e,
|
|
ADMA_REGS_SECTOR_COUNT = 0x12,
|
|
ADMA_REGS_LBA_LOW = 0x13,
|
|
ADMA_REGS_LBA_MID = 0x14,
|
|
ADMA_REGS_LBA_HIGH = 0x15,
|
|
ADMA_REGS_DEVICE = 0x16,
|
|
ADMA_REGS_COMMAND = 0x17,
|
|
|
|
/* PCI device IDs */
|
|
board_1841_idx = 0, /* ADMA 2-port controller */
|
|
};
|
|
|
|
typedef enum { adma_state_idle, adma_state_pkt, adma_state_mmio } adma_state_t;
|
|
|
|
struct adma_port_priv {
|
|
u8 *pkt;
|
|
dma_addr_t pkt_dma;
|
|
adma_state_t state;
|
|
};
|
|
|
|
static int adma_ata_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent);
|
|
static int adma_port_start(struct ata_port *ap);
|
|
static void adma_port_stop(struct ata_port *ap);
|
|
static void adma_qc_prep(struct ata_queued_cmd *qc);
|
|
static unsigned int adma_qc_issue(struct ata_queued_cmd *qc);
|
|
static int adma_check_atapi_dma(struct ata_queued_cmd *qc);
|
|
static void adma_freeze(struct ata_port *ap);
|
|
static void adma_thaw(struct ata_port *ap);
|
|
static int adma_prereset(struct ata_link *link, unsigned long deadline);
|
|
|
|
static struct scsi_host_template adma_ata_sht = {
|
|
ATA_BASE_SHT(DRV_NAME),
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.dma_boundary = ADMA_DMA_BOUNDARY,
|
|
};
|
|
|
|
static struct ata_port_operations adma_ata_ops = {
|
|
.inherits = &ata_sff_port_ops,
|
|
|
|
.lost_interrupt = ATA_OP_NULL,
|
|
|
|
.check_atapi_dma = adma_check_atapi_dma,
|
|
.qc_prep = adma_qc_prep,
|
|
.qc_issue = adma_qc_issue,
|
|
|
|
.freeze = adma_freeze,
|
|
.thaw = adma_thaw,
|
|
.prereset = adma_prereset,
|
|
|
|
.port_start = adma_port_start,
|
|
.port_stop = adma_port_stop,
|
|
};
|
|
|
|
static struct ata_port_info adma_port_info[] = {
|
|
/* board_1841_idx */
|
|
{
|
|
.flags = ATA_FLAG_SLAVE_POSS |
|
|
ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO |
|
|
ATA_FLAG_PIO_POLLING,
|
|
.pio_mask = ATA_PIO4_ONLY,
|
|
.udma_mask = ATA_UDMA4,
|
|
.port_ops = &adma_ata_ops,
|
|
},
|
|
};
|
|
|
|
static const struct pci_device_id adma_ata_pci_tbl[] = {
|
|
{ PCI_VDEVICE(PDC, 0x1841), board_1841_idx },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver adma_ata_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = adma_ata_pci_tbl,
|
|
.probe = adma_ata_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static int adma_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
return 1; /* ATAPI DMA not yet supported */
|
|
}
|
|
|
|
static void adma_reset_engine(struct ata_port *ap)
|
|
{
|
|
void __iomem *chan = ADMA_PORT_REGS(ap);
|
|
|
|
/* reset ADMA to idle state */
|
|
writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL);
|
|
udelay(2);
|
|
writew(aPIOMD4, chan + ADMA_CONTROL);
|
|
udelay(2);
|
|
}
|
|
|
|
static void adma_reinit_engine(struct ata_port *ap)
|
|
{
|
|
struct adma_port_priv *pp = ap->private_data;
|
|
void __iomem *chan = ADMA_PORT_REGS(ap);
|
|
|
|
/* mask/clear ATA interrupts */
|
|
writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
|
|
ata_sff_check_status(ap);
|
|
|
|
/* reset the ADMA engine */
|
|
adma_reset_engine(ap);
|
|
|
|
/* set in-FIFO threshold to 0x100 */
|
|
writew(0x100, chan + ADMA_FIFO_IN);
|
|
|
|
/* set CPB pointer */
|
|
writel((u32)pp->pkt_dma, chan + ADMA_CPB_NEXT);
|
|
|
|
/* set out-FIFO threshold to 0x100 */
|
|
writew(0x100, chan + ADMA_FIFO_OUT);
|
|
|
|
/* set CPB count */
|
|
writew(1, chan + ADMA_CPB_COUNT);
|
|
|
|
/* read/discard ADMA status */
|
|
readb(chan + ADMA_STATUS);
|
|
}
|
|
|
|
static inline void adma_enter_reg_mode(struct ata_port *ap)
|
|
{
|
|
void __iomem *chan = ADMA_PORT_REGS(ap);
|
|
|
|
writew(aPIOMD4, chan + ADMA_CONTROL);
|
|
readb(chan + ADMA_STATUS); /* flush */
|
|
}
|
|
|
|
static void adma_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *chan = ADMA_PORT_REGS(ap);
|
|
|
|
/* mask/clear ATA interrupts */
|
|
writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
|
|
ata_sff_check_status(ap);
|
|
|
|
/* reset ADMA to idle state */
|
|
writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL);
|
|
udelay(2);
|
|
writew(aPIOMD4 | aNIEN, chan + ADMA_CONTROL);
|
|
udelay(2);
|
|
}
|
|
|
|
static void adma_thaw(struct ata_port *ap)
|
|
{
|
|
adma_reinit_engine(ap);
|
|
}
|
|
|
|
static int adma_prereset(struct ata_link *link, unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct adma_port_priv *pp = ap->private_data;
|
|
|
|
if (pp->state != adma_state_idle) /* healthy paranoia */
|
|
pp->state = adma_state_mmio;
|
|
adma_reinit_engine(ap);
|
|
|
|
return ata_sff_prereset(link, deadline);
|
|
}
|
|
|
|
static int adma_fill_sg(struct ata_queued_cmd *qc)
|
|
{
|
|
struct scatterlist *sg;
|
|
struct ata_port *ap = qc->ap;
|
|
struct adma_port_priv *pp = ap->private_data;
|
|
u8 *buf = pp->pkt, *last_buf = NULL;
|
|
int i = (2 + buf[3]) * 8;
|
|
u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0);
|
|
unsigned int si;
|
|
|
|
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
|
u32 addr;
|
|
u32 len;
|
|
|
|
addr = (u32)sg_dma_address(sg);
|
|
*(__le32 *)(buf + i) = cpu_to_le32(addr);
|
|
i += 4;
|
|
|
|
len = sg_dma_len(sg) >> 3;
|
|
*(__le32 *)(buf + i) = cpu_to_le32(len);
|
|
i += 4;
|
|
|
|
last_buf = &buf[i];
|
|
buf[i++] = pFLAGS;
|
|
buf[i++] = qc->dev->dma_mode & 0xf;
|
|
buf[i++] = 0; /* pPKLW */
|
|
buf[i++] = 0; /* reserved */
|
|
|
|
*(__le32 *)(buf + i) =
|
|
(pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4);
|
|
i += 4;
|
|
|
|
VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", i/4,
|
|
(unsigned long)addr, len);
|
|
}
|
|
|
|
if (likely(last_buf))
|
|
*last_buf |= pEND;
|
|
|
|
return i;
|
|
}
|
|
|
|
static void adma_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct adma_port_priv *pp = qc->ap->private_data;
|
|
u8 *buf = pp->pkt;
|
|
u32 pkt_dma = (u32)pp->pkt_dma;
|
|
int i = 0;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
adma_enter_reg_mode(qc->ap);
|
|
if (qc->tf.protocol != ATA_PROT_DMA) {
|
|
ata_sff_qc_prep(qc);
|
|
return;
|
|
}
|
|
|
|
buf[i++] = 0; /* Response flags */
|
|
buf[i++] = 0; /* reserved */
|
|
buf[i++] = cVLD | cDAT | cIEN;
|
|
i++; /* cLEN, gets filled in below */
|
|
|
|
*(__le32 *)(buf+i) = cpu_to_le32(pkt_dma); /* cNCPB */
|
|
i += 4; /* cNCPB */
|
|
i += 4; /* cPRD, gets filled in below */
|
|
|
|
buf[i++] = 0; /* reserved */
|
|
buf[i++] = 0; /* reserved */
|
|
buf[i++] = 0; /* reserved */
|
|
buf[i++] = 0; /* reserved */
|
|
|
|
/* ATA registers; must be a multiple of 4 */
|
|
buf[i++] = qc->tf.device;
|
|
buf[i++] = ADMA_REGS_DEVICE;
|
|
if ((qc->tf.flags & ATA_TFLAG_LBA48)) {
|
|
buf[i++] = qc->tf.hob_nsect;
|
|
buf[i++] = ADMA_REGS_SECTOR_COUNT;
|
|
buf[i++] = qc->tf.hob_lbal;
|
|
buf[i++] = ADMA_REGS_LBA_LOW;
|
|
buf[i++] = qc->tf.hob_lbam;
|
|
buf[i++] = ADMA_REGS_LBA_MID;
|
|
buf[i++] = qc->tf.hob_lbah;
|
|
buf[i++] = ADMA_REGS_LBA_HIGH;
|
|
}
|
|
buf[i++] = qc->tf.nsect;
|
|
buf[i++] = ADMA_REGS_SECTOR_COUNT;
|
|
buf[i++] = qc->tf.lbal;
|
|
buf[i++] = ADMA_REGS_LBA_LOW;
|
|
buf[i++] = qc->tf.lbam;
|
|
buf[i++] = ADMA_REGS_LBA_MID;
|
|
buf[i++] = qc->tf.lbah;
|
|
buf[i++] = ADMA_REGS_LBA_HIGH;
|
|
buf[i++] = 0;
|
|
buf[i++] = ADMA_REGS_CONTROL;
|
|
buf[i++] = rIGN;
|
|
buf[i++] = 0;
|
|
buf[i++] = qc->tf.command;
|
|
buf[i++] = ADMA_REGS_COMMAND | rEND;
|
|
|
|
buf[3] = (i >> 3) - 2; /* cLEN */
|
|
*(__le32 *)(buf+8) = cpu_to_le32(pkt_dma + i); /* cPRD */
|
|
|
|
i = adma_fill_sg(qc);
|
|
wmb(); /* flush PRDs and pkt to memory */
|
|
#if 0
|
|
/* dump out CPB + PRDs for debug */
|
|
{
|
|
int j, len = 0;
|
|
static char obuf[2048];
|
|
for (j = 0; j < i; ++j) {
|
|
len += sprintf(obuf+len, "%02x ", buf[j]);
|
|
if ((j & 7) == 7) {
|
|
printk("%s\n", obuf);
|
|
len = 0;
|
|
}
|
|
}
|
|
if (len)
|
|
printk("%s\n", obuf);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static inline void adma_packet_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
void __iomem *chan = ADMA_PORT_REGS(ap);
|
|
|
|
VPRINTK("ENTER, ap %p\n", ap);
|
|
|
|
/* fire up the ADMA engine */
|
|
writew(aPIOMD4 | aGO, chan + ADMA_CONTROL);
|
|
}
|
|
|
|
static unsigned int adma_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct adma_port_priv *pp = qc->ap->private_data;
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
pp->state = adma_state_pkt;
|
|
adma_packet_start(qc);
|
|
return 0;
|
|
|
|
case ATAPI_PROT_DMA:
|
|
BUG();
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
pp->state = adma_state_mmio;
|
|
return ata_sff_qc_issue(qc);
|
|
}
|
|
|
|
static inline unsigned int adma_intr_pkt(struct ata_host *host)
|
|
{
|
|
unsigned int handled = 0, port_no;
|
|
|
|
for (port_no = 0; port_no < host->n_ports; ++port_no) {
|
|
struct ata_port *ap = host->ports[port_no];
|
|
struct adma_port_priv *pp;
|
|
struct ata_queued_cmd *qc;
|
|
void __iomem *chan = ADMA_PORT_REGS(ap);
|
|
u8 status = readb(chan + ADMA_STATUS);
|
|
|
|
if (status == 0)
|
|
continue;
|
|
handled = 1;
|
|
adma_enter_reg_mode(ap);
|
|
pp = ap->private_data;
|
|
if (!pp || pp->state != adma_state_pkt)
|
|
continue;
|
|
qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
|
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
|
|
if (status & aPERR)
|
|
qc->err_mask |= AC_ERR_HOST_BUS;
|
|
else if ((status & (aPSD | aUIRQ)))
|
|
qc->err_mask |= AC_ERR_OTHER;
|
|
|
|
if (pp->pkt[0] & cATERR)
|
|
qc->err_mask |= AC_ERR_DEV;
|
|
else if (pp->pkt[0] != cDONE)
|
|
qc->err_mask |= AC_ERR_OTHER;
|
|
|
|
if (!qc->err_mask)
|
|
ata_qc_complete(qc);
|
|
else {
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
ata_ehi_clear_desc(ehi);
|
|
ata_ehi_push_desc(ehi,
|
|
"ADMA-status 0x%02X", status);
|
|
ata_ehi_push_desc(ehi,
|
|
"pkt[0] 0x%02X", pp->pkt[0]);
|
|
|
|
if (qc->err_mask == AC_ERR_DEV)
|
|
ata_port_abort(ap);
|
|
else
|
|
ata_port_freeze(ap);
|
|
}
|
|
}
|
|
}
|
|
return handled;
|
|
}
|
|
|
|
static inline unsigned int adma_intr_mmio(struct ata_host *host)
|
|
{
|
|
unsigned int handled = 0, port_no;
|
|
|
|
for (port_no = 0; port_no < host->n_ports; ++port_no) {
|
|
struct ata_port *ap = host->ports[port_no];
|
|
struct adma_port_priv *pp = ap->private_data;
|
|
struct ata_queued_cmd *qc;
|
|
|
|
if (!pp || pp->state != adma_state_mmio)
|
|
continue;
|
|
qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
|
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
|
|
|
|
/* check main status, clearing INTRQ */
|
|
u8 status = ata_sff_check_status(ap);
|
|
if ((status & ATA_BUSY))
|
|
continue;
|
|
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
|
|
ap->print_id, qc->tf.protocol, status);
|
|
|
|
/* complete taskfile transaction */
|
|
pp->state = adma_state_idle;
|
|
qc->err_mask |= ac_err_mask(status);
|
|
if (!qc->err_mask)
|
|
ata_qc_complete(qc);
|
|
else {
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
ata_ehi_clear_desc(ehi);
|
|
ata_ehi_push_desc(ehi, "status 0x%02X", status);
|
|
|
|
if (qc->err_mask == AC_ERR_DEV)
|
|
ata_port_abort(ap);
|
|
else
|
|
ata_port_freeze(ap);
|
|
}
|
|
handled = 1;
|
|
}
|
|
}
|
|
return handled;
|
|
}
|
|
|
|
static irqreturn_t adma_intr(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
unsigned int handled = 0;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
spin_lock(&host->lock);
|
|
handled = adma_intr_pkt(host) | adma_intr_mmio(host);
|
|
spin_unlock(&host->lock);
|
|
|
|
VPRINTK("EXIT\n");
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void adma_ata_setup_port(struct ata_ioports *port, void __iomem *base)
|
|
{
|
|
port->cmd_addr =
|
|
port->data_addr = base + 0x000;
|
|
port->error_addr =
|
|
port->feature_addr = base + 0x004;
|
|
port->nsect_addr = base + 0x008;
|
|
port->lbal_addr = base + 0x00c;
|
|
port->lbam_addr = base + 0x010;
|
|
port->lbah_addr = base + 0x014;
|
|
port->device_addr = base + 0x018;
|
|
port->status_addr =
|
|
port->command_addr = base + 0x01c;
|
|
port->altstatus_addr =
|
|
port->ctl_addr = base + 0x038;
|
|
}
|
|
|
|
static int adma_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct adma_port_priv *pp;
|
|
|
|
adma_enter_reg_mode(ap);
|
|
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
pp->pkt = dmam_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma,
|
|
GFP_KERNEL);
|
|
if (!pp->pkt)
|
|
return -ENOMEM;
|
|
/* paranoia? */
|
|
if ((pp->pkt_dma & 7) != 0) {
|
|
printk(KERN_ERR "bad alignment for pp->pkt_dma: %08x\n",
|
|
(u32)pp->pkt_dma);
|
|
return -ENOMEM;
|
|
}
|
|
memset(pp->pkt, 0, ADMA_PKT_BYTES);
|
|
ap->private_data = pp;
|
|
adma_reinit_engine(ap);
|
|
return 0;
|
|
}
|
|
|
|
static void adma_port_stop(struct ata_port *ap)
|
|
{
|
|
adma_reset_engine(ap);
|
|
}
|
|
|
|
static void adma_host_init(struct ata_host *host, unsigned int chip_id)
|
|
{
|
|
unsigned int port_no;
|
|
|
|
/* enable/lock aGO operation */
|
|
writeb(7, host->iomap[ADMA_MMIO_BAR] + ADMA_MODE_LOCK);
|
|
|
|
/* reset the ADMA logic */
|
|
for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
|
|
adma_reset_engine(host->ports[port_no]);
|
|
}
|
|
|
|
static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
|
|
{
|
|
int rc;
|
|
|
|
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit consistent DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int adma_ata_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
unsigned int board_idx = (unsigned int) ent->driver_data;
|
|
const struct ata_port_info *ppi[] = { &adma_port_info[board_idx], NULL };
|
|
struct ata_host *host;
|
|
void __iomem *mmio_base;
|
|
int rc, port_no;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
/* alloc host */
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, ADMA_PORTS);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
|
|
/* acquire resources and fill host */
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0)
|
|
return -ENODEV;
|
|
|
|
rc = pcim_iomap_regions(pdev, 1 << ADMA_MMIO_BAR, DRV_NAME);
|
|
if (rc)
|
|
return rc;
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
mmio_base = host->iomap[ADMA_MMIO_BAR];
|
|
|
|
rc = adma_set_dma_masks(pdev, mmio_base);
|
|
if (rc)
|
|
return rc;
|
|
|
|
for (port_no = 0; port_no < ADMA_PORTS; ++port_no) {
|
|
struct ata_port *ap = host->ports[port_no];
|
|
void __iomem *port_base = ADMA_ATA_REGS(mmio_base, port_no);
|
|
unsigned int offset = port_base - mmio_base;
|
|
|
|
adma_ata_setup_port(&ap->ioaddr, port_base);
|
|
|
|
ata_port_pbar_desc(ap, ADMA_MMIO_BAR, -1, "mmio");
|
|
ata_port_pbar_desc(ap, ADMA_MMIO_BAR, offset, "port");
|
|
}
|
|
|
|
/* initialize adapter */
|
|
adma_host_init(host, board_idx);
|
|
|
|
pci_set_master(pdev);
|
|
return ata_host_activate(host, pdev->irq, adma_intr, IRQF_SHARED,
|
|
&adma_ata_sht);
|
|
}
|
|
|
|
static int __init adma_ata_init(void)
|
|
{
|
|
return pci_register_driver(&adma_ata_pci_driver);
|
|
}
|
|
|
|
static void __exit adma_ata_exit(void)
|
|
{
|
|
pci_unregister_driver(&adma_ata_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Mark Lord");
|
|
MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(adma_ata_init);
|
|
module_exit(adma_ata_exit);
|