mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-30 21:46:31 +00:00
6d0bfe2261
This adds the ability to send ICMPv6 echo requests without a
raw socket. The equivalent ability for ICMPv4 was added in
2011.
Instead of having separate code paths for IPv4 and IPv6, make
most of the code in net/ipv4/ping.c dual-stack and only add a
few IPv6-specific bits (like the protocol definition) to a new
net/ipv6/ping.c. Hopefully this will reduce divergence and/or
duplication of bugs in the future.
Caveats:
- Setting options via ancillary data (e.g., using IPV6_PKTINFO
to specify the outgoing interface) is not yet supported.
- There are no separate security settings for IPv4 and IPv6;
everything is controlled by /proc/net/ipv4/ping_group_range.
- The proc interface does not yet display IPv6 ping sockets
properly.
Tested with a patched copy of ping6 and using raw socket calls.
Compiles and works with all of CONFIG_IPV6={n,m,y}.
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
47 lines
1.6 KiB
Makefile
47 lines
1.6 KiB
Makefile
#
|
|
# Makefile for the Linux TCP/IP (INET6) layer.
|
|
#
|
|
|
|
obj-$(CONFIG_IPV6) += ipv6.o
|
|
|
|
ipv6-objs := af_inet6.o anycast.o ip6_output.o ip6_input.o addrconf.o \
|
|
addrlabel.o \
|
|
route.o ip6_fib.o ipv6_sockglue.o ndisc.o udp.o udplite.o \
|
|
raw.o icmp.o mcast.o reassembly.o tcp_ipv6.o ping.o \
|
|
exthdrs.o datagram.o ip6_flowlabel.o inet6_connection_sock.o
|
|
|
|
ipv6-offload := ip6_offload.o tcpv6_offload.o udp_offload.o exthdrs_offload.o
|
|
|
|
ipv6-$(CONFIG_SYSCTL) = sysctl_net_ipv6.o
|
|
ipv6-$(CONFIG_IPV6_MROUTE) += ip6mr.o
|
|
|
|
ipv6-$(CONFIG_XFRM) += xfrm6_policy.o xfrm6_state.o xfrm6_input.o \
|
|
xfrm6_output.o
|
|
ipv6-$(CONFIG_NETFILTER) += netfilter.o
|
|
ipv6-$(CONFIG_IPV6_MULTIPLE_TABLES) += fib6_rules.o
|
|
ipv6-$(CONFIG_PROC_FS) += proc.o
|
|
ipv6-$(CONFIG_SYN_COOKIES) += syncookies.o
|
|
|
|
ipv6-objs += $(ipv6-y)
|
|
|
|
obj-$(CONFIG_INET6_AH) += ah6.o
|
|
obj-$(CONFIG_INET6_ESP) += esp6.o
|
|
obj-$(CONFIG_INET6_IPCOMP) += ipcomp6.o
|
|
obj-$(CONFIG_INET6_XFRM_TUNNEL) += xfrm6_tunnel.o
|
|
obj-$(CONFIG_INET6_TUNNEL) += tunnel6.o
|
|
obj-$(CONFIG_INET6_XFRM_MODE_TRANSPORT) += xfrm6_mode_transport.o
|
|
obj-$(CONFIG_INET6_XFRM_MODE_TUNNEL) += xfrm6_mode_tunnel.o
|
|
obj-$(CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION) += xfrm6_mode_ro.o
|
|
obj-$(CONFIG_INET6_XFRM_MODE_BEET) += xfrm6_mode_beet.o
|
|
obj-$(CONFIG_IPV6_MIP6) += mip6.o
|
|
obj-$(CONFIG_NETFILTER) += netfilter/
|
|
|
|
obj-$(CONFIG_IPV6_SIT) += sit.o
|
|
obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.o
|
|
obj-$(CONFIG_IPV6_GRE) += ip6_gre.o
|
|
|
|
obj-y += addrconf_core.o exthdrs_core.o ip6_checksum.o ip6_icmp.o
|
|
obj-$(CONFIG_INET) += output_core.o protocol.o $(ipv6-offload)
|
|
|
|
obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o
|