mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-27 20:07:09 +00:00
061ad5038c
Core changes: - Simplify threaded interrupt handling: instead of passing numbed parameters to gpiochip_irqchip_add_chained() we create a new call: gpiochip_irqchip_add_nested() so the two types are clearly semantically different. Also make sure that all nested chips call gpiochip_set_nested_irqchip() which is necessary for IRQ resend to work properly if it happens. - Return error on seek operations for the chardev. - Clamp values set as part of gpio[d]_direction_output() so that anything != 0 will be send down to the driver as "1" not the value passed in. - ACPI can now support naming of GPIO lines, hogs and holes in the GPIO lists. New drivers: - The SX150x driver was deemed unfit for the GPIO subsystem and was moved over to a combined GPIO+pinctrl driver in the pinctrl subsystem. New features: - Various cleanups to various drivers. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJYTnG4AAoJEEEQszewGV1zbbsQAIxxsAobyQDnBaWyAJtVP33R mzoR5iBuWrN02rvWmYw8k3euj+2pH2Mxnl0FeezRQ5KomNLKeOghWM4VuMLPE+Mf hz/twZvMH3biTxWDzP5C6xsmqiCZbvqnHo0dClgGOphxwcxtRJd7nCVGssqBSVJ+ FNoTvWhyEbF49fF1tPpKXSsjdYNNO8k119hu7QxwGQBde6zy2QbZd9fAZdjLGk1N nzn7Jah895nX95rUx37wwp2H8O6G3+ns1/uLzfnJRJ37+wWCxrr9Xx1peOErxpG9 dwYYI3aNwR1/xYdMjAhJGDNqK7Jjt2w4c8vku/H5JDRoARCSfdFiTTvVBvEvU/Mq IQCMW8D0/cCp6wFGrjyX7lzrfZMh5byWeVID6GKi1wDUop+ed/MX7Et1fFKRuDPC s0FXE3onW9BJlT0zUANrt9fQRK+54g8VsUlHmZX1cu0VNCkCb51lqnc6WE5AMeqH 1t2bB5U96pcebNKe0yJsOj2JdvBL/EEZVuJua5fEMIdwmEidZqthBV+rMqAfJhza t4G86q8qcyo98EgPVwVYILOOiOhXjk90SERh7MN/tiHmGVzJvoBmlQ+TYAxCTjFh X7s4DLGZWyT5duDBodZvkIqoz/yYNF6mPfyCok18yQkz/a0Zptr1dIxN1Vu3A8yl CEUfW/uTUtpTmmJd7jqI =2UpT -----END PGP SIGNATURE----- Merge tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Luinus Walleij: "Bulk GPIO changes for the v4.10 kernel cycle: Core changes: - Simplify threaded interrupt handling: instead of passing numbed parameters to gpiochip_irqchip_add_chained() we create a new call: gpiochip_irqchip_add_nested() so the two types are clearly semantically different. Also make sure that all nested chips call gpiochip_set_nested_irqchip() which is necessary for IRQ resend to work properly if it happens. - Return error on seek operations for the chardev. - Clamp values set as part of gpio[d]_direction_output() so that anything != 0 will be send down to the driver as "1" not the value passed in. - ACPI can now support naming of GPIO lines, hogs and holes in the GPIO lists. New drivers: - The SX150x driver was deemed unfit for the GPIO subsystem and was moved over to a combined GPIO+pinctrl driver in the pinctrl subsystem. New features: - Various cleanups to various drivers" * tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits) gpio: merrifield: Implement gpio_get_direction callback gpio: merrifield: Add support for hardware debouncer gpio: chardev: Return error for seek operations gpio: arizona: Tidy up probe error path gpio: arizona: Remove pointless set of platform drvdata gpio: pl061: delete platform data handling gpio: pl061: move platform data into driver gpio: pl061: rename variable from chip to pl061 gpio: pl061: rename state container struct gpio: pl061: use local state for parent IRQ storage gpio: set explicit nesting on drivers gpio: simplify adding threaded interrupts gpio: vf610: use builtin_platform_driver gpio: axp209: use correct register for GPIO input status gpio: stmpe: fix interrupt handling bug gpio: em: depnd on ARCH_SHMOBILE gpio: zx: depend on ARCH_ZX gpio: x86: update config dependencies for x86 specific hardware gpio: mb86s7x: use builtin_platform_driver gpio: etraxfs: use builtin_platform_driver ...
400 lines
11 KiB
C
400 lines
11 KiB
C
/*
|
|
* MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
|
|
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
|
|
*
|
|
* Based on code from Freescale,
|
|
* Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301, USA.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/gpio/driver.h>
|
|
/* FIXME: for gpio_get_value(), replace this by direct register read */
|
|
#include <linux/gpio.h>
|
|
#include <linux/module.h>
|
|
|
|
#define MXS_SET 0x4
|
|
#define MXS_CLR 0x8
|
|
|
|
#define PINCTRL_DOUT(p) ((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10)
|
|
#define PINCTRL_DIN(p) ((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10)
|
|
#define PINCTRL_DOE(p) ((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10)
|
|
#define PINCTRL_PIN2IRQ(p) ((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10)
|
|
#define PINCTRL_IRQEN(p) ((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10)
|
|
#define PINCTRL_IRQLEV(p) ((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10)
|
|
#define PINCTRL_IRQPOL(p) ((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10)
|
|
#define PINCTRL_IRQSTAT(p) ((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10)
|
|
|
|
#define GPIO_INT_FALL_EDGE 0x0
|
|
#define GPIO_INT_LOW_LEV 0x1
|
|
#define GPIO_INT_RISE_EDGE 0x2
|
|
#define GPIO_INT_HIGH_LEV 0x3
|
|
#define GPIO_INT_LEV_MASK (1 << 0)
|
|
#define GPIO_INT_POL_MASK (1 << 1)
|
|
|
|
enum mxs_gpio_id {
|
|
IMX23_GPIO,
|
|
IMX28_GPIO,
|
|
};
|
|
|
|
struct mxs_gpio_port {
|
|
void __iomem *base;
|
|
int id;
|
|
int irq;
|
|
struct irq_domain *domain;
|
|
struct gpio_chip gc;
|
|
enum mxs_gpio_id devid;
|
|
u32 both_edges;
|
|
};
|
|
|
|
static inline int is_imx23_gpio(struct mxs_gpio_port *port)
|
|
{
|
|
return port->devid == IMX23_GPIO;
|
|
}
|
|
|
|
static inline int is_imx28_gpio(struct mxs_gpio_port *port)
|
|
{
|
|
return port->devid == IMX28_GPIO;
|
|
}
|
|
|
|
/* Note: This driver assumes 32 GPIOs are handled in one register */
|
|
|
|
static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
u32 val;
|
|
u32 pin_mask = 1 << d->hwirq;
|
|
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
|
|
struct irq_chip_type *ct = irq_data_get_chip_type(d);
|
|
struct mxs_gpio_port *port = gc->private;
|
|
void __iomem *pin_addr;
|
|
int edge;
|
|
|
|
if (!(ct->type & type))
|
|
if (irq_setup_alt_chip(d, type))
|
|
return -EINVAL;
|
|
|
|
port->both_edges &= ~pin_mask;
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
val = gpio_get_value(port->gc.base + d->hwirq);
|
|
if (val)
|
|
edge = GPIO_INT_FALL_EDGE;
|
|
else
|
|
edge = GPIO_INT_RISE_EDGE;
|
|
port->both_edges |= pin_mask;
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
edge = GPIO_INT_RISE_EDGE;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
edge = GPIO_INT_FALL_EDGE;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
edge = GPIO_INT_LOW_LEV;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
edge = GPIO_INT_HIGH_LEV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* set level or edge */
|
|
pin_addr = port->base + PINCTRL_IRQLEV(port);
|
|
if (edge & GPIO_INT_LEV_MASK) {
|
|
writel(pin_mask, pin_addr + MXS_SET);
|
|
writel(pin_mask, port->base + PINCTRL_IRQEN(port) + MXS_SET);
|
|
} else {
|
|
writel(pin_mask, pin_addr + MXS_CLR);
|
|
writel(pin_mask, port->base + PINCTRL_PIN2IRQ(port) + MXS_SET);
|
|
}
|
|
|
|
/* set polarity */
|
|
pin_addr = port->base + PINCTRL_IRQPOL(port);
|
|
if (edge & GPIO_INT_POL_MASK)
|
|
writel(pin_mask, pin_addr + MXS_SET);
|
|
else
|
|
writel(pin_mask, pin_addr + MXS_CLR);
|
|
|
|
writel(pin_mask,
|
|
port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxs_flip_edge(struct mxs_gpio_port *port, u32 gpio)
|
|
{
|
|
u32 bit, val, edge;
|
|
void __iomem *pin_addr;
|
|
|
|
bit = 1 << gpio;
|
|
|
|
pin_addr = port->base + PINCTRL_IRQPOL(port);
|
|
val = readl(pin_addr);
|
|
edge = val & bit;
|
|
|
|
if (edge)
|
|
writel(bit, pin_addr + MXS_CLR);
|
|
else
|
|
writel(bit, pin_addr + MXS_SET);
|
|
}
|
|
|
|
/* MXS has one interrupt *per* gpio port */
|
|
static void mxs_gpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
u32 irq_stat;
|
|
struct mxs_gpio_port *port = irq_desc_get_handler_data(desc);
|
|
|
|
desc->irq_data.chip->irq_ack(&desc->irq_data);
|
|
|
|
irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) &
|
|
readl(port->base + PINCTRL_IRQEN(port));
|
|
|
|
while (irq_stat != 0) {
|
|
int irqoffset = fls(irq_stat) - 1;
|
|
if (port->both_edges & (1 << irqoffset))
|
|
mxs_flip_edge(port, irqoffset);
|
|
|
|
generic_handle_irq(irq_find_mapping(port->domain, irqoffset));
|
|
irq_stat &= ~(1 << irqoffset);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Set interrupt number "irq" in the GPIO as a wake-up source.
|
|
* While system is running, all registered GPIO interrupts need to have
|
|
* wake-up enabled. When system is suspended, only selected GPIO interrupts
|
|
* need to have wake-up enabled.
|
|
* @param irq interrupt source number
|
|
* @param enable enable as wake-up if equal to non-zero
|
|
* @return This function returns 0 on success.
|
|
*/
|
|
static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
|
|
{
|
|
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
|
|
struct mxs_gpio_port *port = gc->private;
|
|
|
|
if (enable)
|
|
enable_irq_wake(port->irq);
|
|
else
|
|
disable_irq_wake(port->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base)
|
|
{
|
|
struct irq_chip_generic *gc;
|
|
struct irq_chip_type *ct;
|
|
|
|
gc = irq_alloc_generic_chip("gpio-mxs", 2, irq_base,
|
|
port->base, handle_level_irq);
|
|
if (!gc)
|
|
return -ENOMEM;
|
|
|
|
gc->private = port;
|
|
|
|
ct = &gc->chip_types[0];
|
|
ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW;
|
|
ct->chip.irq_ack = irq_gc_ack_set_bit;
|
|
ct->chip.irq_mask = irq_gc_mask_disable_reg;
|
|
ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
|
|
ct->chip.irq_set_type = mxs_gpio_set_irq_type;
|
|
ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
|
|
ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
|
|
ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
|
|
ct->regs.enable = PINCTRL_PIN2IRQ(port) + MXS_SET;
|
|
ct->regs.disable = PINCTRL_PIN2IRQ(port) + MXS_CLR;
|
|
|
|
ct = &gc->chip_types[1];
|
|
ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
|
|
ct->chip.irq_ack = irq_gc_ack_set_bit;
|
|
ct->chip.irq_mask = irq_gc_mask_disable_reg;
|
|
ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
|
|
ct->chip.irq_set_type = mxs_gpio_set_irq_type;
|
|
ct->chip.irq_set_wake = mxs_gpio_set_wake_irq;
|
|
ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
|
|
ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR;
|
|
ct->regs.enable = PINCTRL_IRQEN(port) + MXS_SET;
|
|
ct->regs.disable = PINCTRL_IRQEN(port) + MXS_CLR;
|
|
ct->handler = handle_level_irq;
|
|
|
|
irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_NESTED_LOCK,
|
|
IRQ_NOREQUEST, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct mxs_gpio_port *port = gpiochip_get_data(gc);
|
|
|
|
return irq_find_mapping(port->domain, offset);
|
|
}
|
|
|
|
static int mxs_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
struct mxs_gpio_port *port = gpiochip_get_data(gc);
|
|
u32 mask = 1 << offset;
|
|
u32 dir;
|
|
|
|
dir = readl(port->base + PINCTRL_DOE(port));
|
|
return !(dir & mask);
|
|
}
|
|
|
|
static const struct platform_device_id mxs_gpio_ids[] = {
|
|
{
|
|
.name = "imx23-gpio",
|
|
.driver_data = IMX23_GPIO,
|
|
}, {
|
|
.name = "imx28-gpio",
|
|
.driver_data = IMX28_GPIO,
|
|
}, {
|
|
/* sentinel */
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, mxs_gpio_ids);
|
|
|
|
static const struct of_device_id mxs_gpio_dt_ids[] = {
|
|
{ .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, },
|
|
{ .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids);
|
|
|
|
static int mxs_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id =
|
|
of_match_device(mxs_gpio_dt_ids, &pdev->dev);
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device_node *parent;
|
|
static void __iomem *base;
|
|
struct mxs_gpio_port *port;
|
|
int irq_base;
|
|
int err;
|
|
|
|
port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
|
|
if (!port)
|
|
return -ENOMEM;
|
|
|
|
port->id = of_alias_get_id(np, "gpio");
|
|
if (port->id < 0)
|
|
return port->id;
|
|
port->devid = (enum mxs_gpio_id) of_id->data;
|
|
port->irq = platform_get_irq(pdev, 0);
|
|
if (port->irq < 0)
|
|
return port->irq;
|
|
|
|
/*
|
|
* map memory region only once, as all the gpio ports
|
|
* share the same one
|
|
*/
|
|
if (!base) {
|
|
parent = of_get_parent(np);
|
|
base = of_iomap(parent, 0);
|
|
of_node_put(parent);
|
|
if (!base)
|
|
return -EADDRNOTAVAIL;
|
|
}
|
|
port->base = base;
|
|
|
|
/* initially disable the interrupts */
|
|
writel(0, port->base + PINCTRL_PIN2IRQ(port));
|
|
writel(0, port->base + PINCTRL_IRQEN(port));
|
|
|
|
/* clear address has to be used to clear IRQSTAT bits */
|
|
writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR);
|
|
|
|
irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
|
|
if (irq_base < 0) {
|
|
err = irq_base;
|
|
goto out_iounmap;
|
|
}
|
|
|
|
port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
|
|
&irq_domain_simple_ops, NULL);
|
|
if (!port->domain) {
|
|
err = -ENODEV;
|
|
goto out_irqdesc_free;
|
|
}
|
|
|
|
/* gpio-mxs can be a generic irq chip */
|
|
err = mxs_gpio_init_gc(port, irq_base);
|
|
if (err < 0)
|
|
goto out_irqdomain_remove;
|
|
|
|
/* setup one handler for each entry */
|
|
irq_set_chained_handler_and_data(port->irq, mxs_gpio_irq_handler,
|
|
port);
|
|
|
|
err = bgpio_init(&port->gc, &pdev->dev, 4,
|
|
port->base + PINCTRL_DIN(port),
|
|
port->base + PINCTRL_DOUT(port) + MXS_SET,
|
|
port->base + PINCTRL_DOUT(port) + MXS_CLR,
|
|
port->base + PINCTRL_DOE(port), NULL, 0);
|
|
if (err)
|
|
goto out_irqdomain_remove;
|
|
|
|
port->gc.to_irq = mxs_gpio_to_irq;
|
|
port->gc.get_direction = mxs_gpio_get_direction;
|
|
port->gc.base = port->id * 32;
|
|
|
|
err = gpiochip_add_data(&port->gc, port);
|
|
if (err)
|
|
goto out_irqdomain_remove;
|
|
|
|
return 0;
|
|
|
|
out_irqdomain_remove:
|
|
irq_domain_remove(port->domain);
|
|
out_irqdesc_free:
|
|
irq_free_descs(irq_base, 32);
|
|
out_iounmap:
|
|
iounmap(port->base);
|
|
return err;
|
|
}
|
|
|
|
static struct platform_driver mxs_gpio_driver = {
|
|
.driver = {
|
|
.name = "gpio-mxs",
|
|
.of_match_table = mxs_gpio_dt_ids,
|
|
},
|
|
.probe = mxs_gpio_probe,
|
|
.id_table = mxs_gpio_ids,
|
|
};
|
|
|
|
static int __init mxs_gpio_init(void)
|
|
{
|
|
return platform_driver_register(&mxs_gpio_driver);
|
|
}
|
|
postcore_initcall(mxs_gpio_init);
|
|
|
|
MODULE_AUTHOR("Freescale Semiconductor, "
|
|
"Daniel Mack <danielncaiaq.de>, "
|
|
"Juergen Beisert <kernel@pengutronix.de>");
|
|
MODULE_DESCRIPTION("Freescale MXS GPIO");
|
|
MODULE_LICENSE("GPL");
|