mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-18 23:18:20 +00:00
6ff8f59f13
Patch from Ben Dooks Update the Documentation/arm/Samsung-S3C24XX to add example platform data initialisation, and add the linux-arm mailing list URL. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
196 lines
5.5 KiB
Plaintext
196 lines
5.5 KiB
Plaintext
S3C24XX ARM Linux Overview
|
|
==========================
|
|
|
|
|
|
|
|
Introduction
|
|
------------
|
|
|
|
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
|
|
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410 and
|
|
the S3C2440 are supported CPUs.
|
|
|
|
|
|
Configuration
|
|
-------------
|
|
|
|
A generic S3C2410 configuration is provided, and can be used as the
|
|
default by `make s3c2410_defconfig`. This configuration has support
|
|
for all the machines, and the commonly used features on them.
|
|
|
|
Certain machines may have their own default configurations as well,
|
|
please check the machine specific documentation.
|
|
|
|
|
|
Machines
|
|
--------
|
|
|
|
The currently supported machines are as follows:
|
|
|
|
Simtec Electronics EB2410ITX (BAST)
|
|
|
|
A general purpose development board, see EB2410ITX.txt for further
|
|
details
|
|
|
|
Samsung SMDK2410
|
|
|
|
Samsung's own development board, geared for PDA work.
|
|
|
|
Samsung/Meritech SMDK2440
|
|
|
|
The S3C2440 compatible version of the SMDK2440
|
|
|
|
Thorcom VR1000
|
|
|
|
Custom embedded board
|
|
|
|
HP IPAQ 1940
|
|
|
|
Handheld (IPAQ), available in several varieties
|
|
|
|
HP iPAQ rx3715
|
|
|
|
S3C2440 based IPAQ, with a number of variations depending on
|
|
features shipped.
|
|
|
|
Acer N30
|
|
|
|
A S3C2410 based PDA from Acer. There is a Wiki page at
|
|
http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
|
|
|
|
|
|
Adding New Machines
|
|
-------------------
|
|
|
|
The archicture has been designed to support as many machines as can
|
|
be configured for it in one kernel build, and any future additions
|
|
should keep this in mind before altering items outside of their own
|
|
machine files.
|
|
|
|
Machine definitions should be kept in linux/arch/arm/mach-s3c2410,
|
|
and there are a number of examples that can be looked at.
|
|
|
|
Read the kernel patch submission policies as well as the
|
|
Documentation/arm directory before submitting patches. The
|
|
ARM kernel series is managed by Russell King, and has a patch system
|
|
located at http://www.arm.linux.org.uk/developer/patches/
|
|
as well as mailing lists that can be found from the same site.
|
|
|
|
As a courtesy, please notify <ben-linux@fluff.org> of any new
|
|
machines or other modifications.
|
|
|
|
Any large scale modifications, or new drivers should be discussed
|
|
on the ARM kernel mailing list (linux-arm-kernel) before being
|
|
attempted. See http://www.arm.linux.org.uk/mailinglists/ for the
|
|
mailing list information.
|
|
|
|
|
|
NAND
|
|
----
|
|
|
|
The current kernels now have support for the s3c2410 NAND
|
|
controller. If there are any problems the latest linux-mtd
|
|
CVS can be found from http://www.linux-mtd.infradead.org/
|
|
|
|
|
|
Serial
|
|
------
|
|
|
|
The s3c2410 serial driver provides support for the internal
|
|
serial ports. These devices appear as /dev/ttySAC0 through 3.
|
|
|
|
To create device nodes for these, use the following commands
|
|
|
|
mknod ttySAC0 c 204 64
|
|
mknod ttySAC1 c 204 65
|
|
mknod ttySAC2 c 204 66
|
|
|
|
|
|
GPIO
|
|
----
|
|
|
|
The core contains support for manipulating the GPIO, see the
|
|
documentation in GPIO.txt in the same directory as this file.
|
|
|
|
|
|
Clock Management
|
|
----------------
|
|
|
|
The core provides the interface defined in the header file
|
|
include/asm-arm/hardware/clock.h, to allow control over the
|
|
various clock units
|
|
|
|
|
|
Platform Data
|
|
-------------
|
|
|
|
Whenever a device has platform specific data that is specified
|
|
on a per-machine basis, care should be taken to ensure the
|
|
following:
|
|
|
|
1) that default data is not left in the device to confuse the
|
|
driver if a machine does not set it at startup
|
|
|
|
2) the data should (if possible) be marked as __initdata,
|
|
to ensure that the data is thrown away if the machine is
|
|
not the one currently in use.
|
|
|
|
The best way of doing this is to make a function that
|
|
kmalloc()s an area of memory, and copies the __initdata
|
|
and then sets the relevant device's platform data. Making
|
|
the function `__init` takes care of ensuring it is discarded
|
|
with the rest of the initialisation code
|
|
|
|
static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd)
|
|
{
|
|
struct s3c2410_xxx_mach_info *npd;
|
|
|
|
npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL);
|
|
if (npd) {
|
|
memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info));
|
|
s3c_device_xxx.dev.platform_data = npd;
|
|
} else {
|
|
printk(KERN_ERR "no memory for xxx platform data\n");
|
|
}
|
|
}
|
|
|
|
Note, since the code is marked as __init, it should not be
|
|
exported outside arch/arm/mach-s3c2410/, or exported to
|
|
modules via EXPORT_SYMBOL() and related functions.
|
|
|
|
Port Contributors
|
|
-----------------
|
|
|
|
Ben Dooks (BJD)
|
|
Vincent Sanders
|
|
Herbert Potzl
|
|
Arnaud Patard (RTP)
|
|
Roc Wu
|
|
Klaus Fetscher
|
|
Dimitry Andric
|
|
Shannon Holland
|
|
Guillaume Gourat (NexVision)
|
|
Christer Weinigel (wingel) (Acer N30)
|
|
Lucas Correia Villa Real (S3C2400 port)
|
|
|
|
|
|
Document Changes
|
|
----------------
|
|
|
|
05 Sep 2004 - BJD - Added Document Changes section
|
|
05 Sep 2004 - BJD - Added Klaus Fetscher to list of contributors
|
|
25 Oct 2004 - BJD - Added Dimitry Andric to list of contributors
|
|
25 Oct 2004 - BJD - Updated the MTD from the 2.6.9 merge
|
|
21 Jan 2005 - BJD - Added rx3715, added Shannon to contributors
|
|
10 Feb 2005 - BJD - Added Guillaume Gourat to contributors
|
|
02 Mar 2005 - BJD - Added SMDK2440 to list of machines
|
|
06 Mar 2005 - BJD - Added Christer Weinigel
|
|
08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction
|
|
08 Mar 2005 - BJD - Added section on adding machines
|
|
09 Sep 2005 - BJD - Added section on platform data
|
|
|
|
Document Author
|
|
---------------
|
|
|
|
Ben Dooks, (c) 2004-2005 Simtec Electronics
|