mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-22 09:22:37 +00:00
7d715a6c1a
PCI Express ASPM defines a protocol for PCI Express components in the D0
state to reduce Link power by placing their Links into a low power state
and instructing the other end of the Link to do likewise. This
capability allows hardware-autonomous, dynamic Link power reduction
beyond what is achievable by software-only controlled power management.
However, The device should be configured by software appropriately.
Enabling ASPM will save power, but will introduce device latency.
This patch adds ASPM support in Linux. It introduces a global policy for
ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control
it. The interface can be used as a boot option too. Currently we have
below setting:
-default, BIOS default setting
-powersave, highest power saving mode, enable all available ASPM
state and clock power management
-performance, highest performance, disable ASPM and clock power
management
By default, the 'default' policy is used currently.
In my test, power difference between powersave mode and performance mode
is about 1.3w in a system with 3 PCIE links.
Note: some devices might not work well with aspm, either because chipset
issue or device issue. The patch provide API (pci_disable_link_state),
driver can disable ASPM for specific device.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 lines
286 B
Makefile
14 lines
286 B
Makefile
#
|
|
# Makefile for PCI-Express PORT Driver
|
|
#
|
|
|
|
# Build PCI Express ASPM if needed
|
|
obj-$(CONFIG_PCIEASPM) += aspm.o
|
|
|
|
pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o
|
|
|
|
obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
|
|
|
|
# Build PCI Express AER if needed
|
|
obj-$(CONFIG_PCIEAER) += aer/
|